[net-next v3 PATCH 0/2] Introduce mbox tracepoints for Octeontx2

[net-next v3 PATCH 0/2] Introduce mbox tracepoints for Octeontx2

[sundeep.lkml]

From: Subbaraya Sundeep <sbhatta@marvell.com>

This patchset adds tracepoints support for mailbox.
In Octeontx2, PFs and VFs need to communicate with AF
for allocating and freeing resources. Once all the
configuration is done by AF for a PF/VF then packet I/O
can happen on PF/VF queues. When an interface
is brought up many mailbox messages are sent
to AF for initializing queues. Say a VF is brought up
then each message is sent to PF and PF forwards to
AF and response also traverses from AF to PF and then VF.
To aid debugging, tracepoints are added at places where
messages are allocated, sent and message interrupts.
Below is the trace of one of the messages from VF to AF
and AF response back to VF:

~ # echo 1 > /sys/kernel/tracing/events/rvu/enable
~ # ifconfig eth20 up
[  279.379559] eth20 NIC Link is UP 10000 Mbps Full duplex
~ # cat /sys/kernel/tracing/trace
# tracer: nop
#
# entries-in-buffer/entries-written: 880/880   #P:4
#
#                              _-----=> irqs-off
#                             / _----=> need-resched
#                            | / _---=> hardirq/softirq
#                            || / _--=> preempt-depth
#                            ||| /     delay
#           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
#              | |       |   ||||       |         |
        ifconfig-171   [000] ....   275.753345: otx2_msg_alloc: [0002:02:00.1] msg:(0x400) size:40

        ifconfig-171   [000] ...1   275.753347: otx2_msg_send: [0002:02:00.1] sent 1 msg(s) of size:48

          <idle>-0     [001] dNh1   275.753356: otx2_msg_interrupt: [0002:02:00.0] mbox interrupt VF(s) to PF (0x1)

    kworker/u9:1-90    [001] ...1   275.753364: otx2_msg_send: [0002:02:00.0] sent 1 msg(s) of size:48

    kworker/u9:1-90    [001] d.h.   275.753367: otx2_msg_interrupt: [0002:01:00.0] mbox interrupt PF(s) to AF (0x2)

    kworker/u9:2-167   [002] ....   275.753535: otx2_msg_process: [0002:01:00.0] msg:(0x400) error:0

    kworker/u9:2-167   [002] ...1   275.753537: otx2_msg_send: [0002:01:00.0] sent 1 msg(s) of size:32

          <idle>-0     [003] d.h1   275.753543: otx2_msg_interrupt: [0002:02:00.0] mbox interrupt AF to PF (0x1)

          <idle>-0     [001] d.h2   275.754376: otx2_msg_interrupt: [0002:02:00.1] mbox interrupt PF to VF (0x1)


v3 changes:
 Removed EXPORT_TRACEPOINT_SYMBOLS of otx2_msg_send and otx2_msg_check
 since they are called locally only

v2 changes:
 Removed otx2_msg_err tracepoint since it is similar to devlink_hwerr
 and it will be used instead when devlink supported is added.



Subbaraya Sundeep (2):
  octeontx2-af: Introduce tracepoints for mailbox
  octeontx2-pf: Add tracepoints for PF/VF mailbox

 drivers/net/ethernet/marvell/octeontx2/af/Makefile |   3 +-
 drivers/net/ethernet/marvell/octeontx2/af/mbox.c   |  11 ++-
 drivers/net/ethernet/marvell/octeontx2/af/rvu.c    |   7 ++
 .../net/ethernet/marvell/octeontx2/af/rvu_cgx.c    |   2 +
 .../net/ethernet/marvell/octeontx2/af/rvu_trace.c  |  12 +++
 .../net/ethernet/marvell/octeontx2/af/rvu_trace.h  | 103 +++++++++++++++++++++
 .../ethernet/marvell/octeontx2/nic/otx2_common.h   |   2 +
 .../net/ethernet/marvell/octeontx2/nic/otx2_pf.c   |   6 ++
 .../net/ethernet/marvell/octeontx2/nic/otx2_vf.c   |   2 +
 9 files changed, 146 insertions(+), 2 deletions(-)
 create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/rvu_trace.c
 create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/rvu_trace.h

-- 
2.7.4

[net-next v3 PATCH 1/2] octeontx2-af: Introduce tracepoints for mailbox

[sundeep.lkml]

From: Subbaraya Sundeep <sbhatta@marvell.com>

Added tracepoints in mailbox code so that
the mailbox operations like message allocation,
sending message and message interrupts are traced.
Also the mailbox errors occurred like timeout
or wrong responses are traced.
These will help in debugging mailbox issues.

Here's an example output showing one of the mailbox
messages sent by PF to AF and AF responding to it:

~# mount -t tracefs none /sys/kernel/tracing/
~# echo 1 > /sys/kernel/tracing/events/rvu/enable
~# ifconfig eth0 up
~# cat /sys/kernel/tracing/trace

~# cat /sys/kernel/tracing/trace
 tracer: nop

		      _-----=> irqs-off
		     / _----=> need-resched
		    | / _---=> hardirq/softirq
		    || / _--=> preempt-depth
		    ||| /     delay
   TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
      | |       |   ||||       |         |
ifconfig-2382  [002] ....   756.161892: otx2_msg_alloc: [0002:02:00.0] msg:(0x400) size:40

ifconfig-2382  [002] ...1   756.161895: otx2_msg_send: [0002:02:00.0] sent 1 msg(s) of size:48

 <idle>-0     [000] d.h1   756.161902: otx2_msg_interrupt: [0002:01:00.0] mbox interrupt PF(s) to AF (0x2)

kworker/u49:0-1165  [000] ....   756.162049: otx2_msg_process: [0002:01:00.0] msg:(0x400) error:0

kworker/u49:0-1165  [000] ...1   756.162051: otx2_msg_send: [0002:01:00.0] sent 1 msg(s) of size:32

kworker/u49:0-1165  [000] d.h.   756.162056: otx2_msg_interrupt: [0002:02:00.0] mbox interrupt AF to PF (0x1)

Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
 drivers/net/ethernet/marvell/octeontx2/af/Makefile |   3 +-
 drivers/net/ethernet/marvell/octeontx2/af/mbox.c   |  11 ++-
 drivers/net/ethernet/marvell/octeontx2/af/rvu.c    |   7 ++
 .../net/ethernet/marvell/octeontx2/af/rvu_cgx.c    |   2 +
 .../net/ethernet/marvell/octeontx2/af/rvu_trace.c  |  12 +++
 .../net/ethernet/marvell/octeontx2/af/rvu_trace.h  | 103 +++++++++++++++++++++
 6 files changed, 136 insertions(+), 2 deletions(-)
 create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/rvu_trace.c
 create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/rvu_trace.h

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/Makefile b/drivers/net/ethernet/marvell/octeontx2/af/Makefile
index 0bc2410..2f7a861 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/Makefile
+++ b/drivers/net/ethernet/marvell/octeontx2/af/Makefile
@@ -3,9 +3,10 @@
 # Makefile for Marvell's OcteonTX2 RVU Admin Function driver
 #
 
+ccflags-y += -I$(src)
 obj-$(CONFIG_OCTEONTX2_MBOX) += octeontx2_mbox.o
 obj-$(CONFIG_OCTEONTX2_AF) += octeontx2_af.o
 
-octeontx2_mbox-y := mbox.o
+octeontx2_mbox-y := mbox.o rvu_trace.o
 octeontx2_af-y := cgx.o rvu.o rvu_cgx.o rvu_npa.o rvu_nix.o \
 		  rvu_reg.o rvu_npc.o rvu_debugfs.o ptp.o
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.c b/drivers/net/ethernet/marvell/octeontx2/af/mbox.c
index 387e33f..4b4cf7d 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.c
@@ -14,6 +14,7 @@
 
 #include "rvu_reg.h"
 #include "mbox.h"
+#include "rvu_trace.h"
 
 static const u16 msgs_offset = ALIGN(sizeof(struct mbox_hdr), MBOX_MSG_ALIGN);
 
@@ -199,6 +200,9 @@ void otx2_mbox_msg_send(struct otx2_mbox *mbox, int devid)
 	 */
 	tx_hdr->num_msgs = mdev->num_msgs;
 	rx_hdr->num_msgs = 0;
+
+	trace_otx2_msg_send(mbox->pdev, tx_hdr->num_msgs, tx_hdr->msg_size);
+
 	spin_unlock(&mdev->mbox_lock);
 
 	/* The interrupt should be fired after num_msgs is written
@@ -295,10 +299,15 @@ int otx2_mbox_check_rsp_msgs(struct otx2_mbox *mbox, int devid)
 		struct mbox_msghdr *preq = mdev->mbase + ireq;
 		struct mbox_msghdr *prsp = mdev->mbase + irsp;
 
-		if (preq->id != prsp->id)
+		if (preq->id != prsp->id) {
+			trace_otx2_msg_check(mbox->pdev, preq->id,
+					     prsp->id, prsp->rc);
 			goto exit;
+		}
 		if (prsp->rc) {
 			rc = prsp->rc;
+			trace_otx2_msg_check(mbox->pdev, preq->id,
+					     prsp->id, prsp->rc);
 			goto exit;
 		}
 
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
index c3ef73a..e1f9189 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
@@ -20,6 +20,8 @@
 #include "rvu_reg.h"
 #include "ptp.h"
 
+#include "rvu_trace.h"
+
 #define DRV_NAME	"octeontx2-af"
 #define DRV_STRING      "Marvell OcteonTX2 RVU Admin Function Driver"
 
@@ -1549,6 +1551,7 @@ static int rvu_process_mbox_msg(struct otx2_mbox *mbox, int devid,
 		if (rsp && err)						\
 			rsp->hdr.rc = err;				\
 									\
+		trace_otx2_msg_process(mbox->pdev, _id, err);		\
 		return rsp ? err : -ENOMEM;				\
 	}
 MBOX_MESSAGES
@@ -1881,6 +1884,8 @@ static irqreturn_t rvu_mbox_intr_handler(int irq, void *rvu_irq)
 	intr = rvu_read64(rvu, BLKADDR_RVUM, RVU_AF_PFAF_MBOX_INT);
 	/* Clear interrupts */
 	rvu_write64(rvu, BLKADDR_RVUM, RVU_AF_PFAF_MBOX_INT, intr);
+	if (intr)
+		trace_otx2_msg_interrupt(rvu->pdev, "PF(s) to AF", intr);
 
 	/* Sync with mbox memory region */
 	rmb();
@@ -1898,6 +1903,8 @@ static irqreturn_t rvu_mbox_intr_handler(int irq, void *rvu_irq)
 
 	intr = rvupf_read64(rvu, RVU_PF_VFPF_MBOX_INTX(0));
 	rvupf_write64(rvu, RVU_PF_VFPF_MBOX_INTX(0), intr);
+	if (intr)
+		trace_otx2_msg_interrupt(rvu->pdev, "VF(s) to AF", intr);
 
 	rvu_queue_work(&rvu->afvf_wq_info, 0, vfs, intr);
 
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c
index fe3389c..fa9152f 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c
@@ -15,6 +15,7 @@
 #include "rvu.h"
 #include "cgx.h"
 #include "rvu_reg.h"
+#include "rvu_trace.h"
 
 struct cgx_evq_entry {
 	struct list_head evq_node;
@@ -34,6 +35,7 @@ static struct _req_type __maybe_unused					\
 		return NULL;						\
 	req->hdr.sig = OTX2_MBOX_REQ_SIG;				\
 	req->hdr.id = _id;						\
+	trace_otx2_msg_alloc(rvu->pdev, _id, sizeof(*req));		\
 	return req;							\
 }
 
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_trace.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_trace.c
new file mode 100644
index 0000000..56f90cf
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_trace.c
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell OcteonTx2 RVU Admin Function driver tracepoints
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+#define CREATE_TRACE_POINTS
+#include "rvu_trace.h"
+
+EXPORT_TRACEPOINT_SYMBOL(otx2_msg_alloc);
+EXPORT_TRACEPOINT_SYMBOL(otx2_msg_interrupt);
+EXPORT_TRACEPOINT_SYMBOL(otx2_msg_process);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_trace.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu_trace.h
new file mode 100644
index 0000000..e660906
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_trace.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Marvell OcteonTx2 RVU Admin Function driver tracepoints
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM rvu
+
+#if !defined(__RVU_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define __RVU_TRACE_H
+
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+#include <linux/pci.h>
+
+TRACE_EVENT(otx2_msg_alloc,
+	    TP_PROTO(const struct pci_dev *pdev, u16 id, u64 size),
+	    TP_ARGS(pdev, id, size),
+	    TP_STRUCT__entry(__string(dev, pci_name(pdev))
+			     __field(u16, id)
+			     __field(u64, size)
+	    ),
+	    TP_fast_assign(__assign_str(dev, pci_name(pdev))
+			   __entry->id = id;
+			   __entry->size = size;
+	    ),
+	    TP_printk("[%s] msg:(0x%x) size:%lld\n", __get_str(dev),
+		      __entry->id, __entry->size)
+);
+
+TRACE_EVENT(otx2_msg_send,
+	    TP_PROTO(const struct pci_dev *pdev, u16 num_msgs, u64 msg_size),
+	    TP_ARGS(pdev, num_msgs, msg_size),
+	    TP_STRUCT__entry(__string(dev, pci_name(pdev))
+			     __field(u16, num_msgs)
+			     __field(u64, msg_size)
+	    ),
+	    TP_fast_assign(__assign_str(dev, pci_name(pdev))
+			   __entry->num_msgs = num_msgs;
+			   __entry->msg_size = msg_size;
+	    ),
+	    TP_printk("[%s] sent %d msg(s) of size:%lld\n", __get_str(dev),
+		      __entry->num_msgs, __entry->msg_size)
+);
+
+TRACE_EVENT(otx2_msg_check,
+	    TP_PROTO(const struct pci_dev *pdev, u16 reqid, u16 rspid, int rc),
+	    TP_ARGS(pdev, reqid, rspid, rc),
+	    TP_STRUCT__entry(__string(dev, pci_name(pdev))
+			     __field(u16, reqid)
+			     __field(u16, rspid)
+			     __field(int, rc)
+	    ),
+	    TP_fast_assign(__assign_str(dev, pci_name(pdev))
+			   __entry->reqid = reqid;
+			   __entry->rspid = rspid;
+			   __entry->rc = rc;
+	    ),
+	    TP_printk("[%s] req->id:0x%x rsp->id:0x%x resp_code:%d\n",
+		      __get_str(dev), __entry->reqid,
+		      __entry->rspid, __entry->rc)
+);
+
+TRACE_EVENT(otx2_msg_interrupt,
+	    TP_PROTO(const struct pci_dev *pdev, const char *msg, u64 intr),
+	    TP_ARGS(pdev, msg, intr),
+	    TP_STRUCT__entry(__string(dev, pci_name(pdev))
+			     __string(str, msg)
+			     __field(u64, intr)
+	    ),
+	    TP_fast_assign(__assign_str(dev, pci_name(pdev))
+			   __assign_str(str, msg)
+			   __entry->intr = intr;
+	    ),
+	    TP_printk("[%s] mbox interrupt %s (0x%llx)\n", __get_str(dev),
+		      __get_str(str), __entry->intr)
+);
+
+TRACE_EVENT(otx2_msg_process,
+	    TP_PROTO(const struct pci_dev *pdev, u16 id, int err),
+	    TP_ARGS(pdev, id, err),
+	    TP_STRUCT__entry(__string(dev, pci_name(pdev))
+			     __field(u16, id)
+			     __field(int, err)
+	    ),
+	    TP_fast_assign(__assign_str(dev, pci_name(pdev))
+			   __entry->id = id;
+			   __entry->err = err;
+	    ),
+	    TP_printk("[%s] msg:(0x%x) error:%d\n", __get_str(dev),
+		      __entry->id, __entry->err)
+);
+
+#endif /* __RVU_TRACE_H */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE rvu_trace
+
+#include <trace/define_trace.h>
-- 
2.7.4

[net-next v3 PATCH 2/2] octeontx2-pf: Add tracepoints for PF/VF mailbox

[sundeep.lkml]

From: Subbaraya Sundeep <sbhatta@marvell.com>

With tracepoints support present in the mailbox
code this patch adds tracepoints in PF and VF drivers
at places where mailbox messages are allocated,
sent and at message interrupts.

Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
 drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h | 2 ++
 drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c     | 6 ++++++
 drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c     | 2 ++
 3 files changed, 10 insertions(+)

diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
index ac47762..d6253f2 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
@@ -20,6 +20,7 @@
 #include <mbox.h>
 #include "otx2_reg.h"
 #include "otx2_txrx.h"
+#include <rvu_trace.h>
 
 /* PCI device IDs */
 #define PCI_DEVID_OCTEONTX2_RVU_PF              0xA063
@@ -523,6 +524,7 @@ static struct _req_type __maybe_unused					\
 		return NULL;						\
 	req->hdr.sig = OTX2_MBOX_REQ_SIG;				\
 	req->hdr.id = _id;						\
+	trace_otx2_msg_alloc(mbox->mbox.pdev, _id, sizeof(*req));	\
 	return req;							\
 }
 
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
index aac2845..265e4d1 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
@@ -22,6 +22,7 @@
 #include "otx2_txrx.h"
 #include "otx2_struct.h"
 #include "otx2_ptp.h"
+#include <rvu_trace.h>
 
 #define DRV_NAME	"octeontx2-nicpf"
 #define DRV_STRING	"Marvell OcteonTX2 NIC Physical Function Driver"
@@ -558,6 +559,8 @@ static irqreturn_t otx2_pfvf_mbox_intr_handler(int irq, void *pf_irq)
 
 	otx2_queue_work(mbox, pf->mbox_pfvf_wq, 0, vfs, intr, TYPE_PFVF);
 
+	trace_otx2_msg_interrupt(mbox->mbox.pdev, "VF(s) to PF", intr);
+
 	return IRQ_HANDLED;
 }
 
@@ -940,6 +943,9 @@ static irqreturn_t otx2_pfaf_mbox_intr_handler(int irq, void *pf_irq)
 	otx2_write64(pf, RVU_PF_INT, BIT_ULL(0));
 
 	mbox = &pf->mbox;
+
+	trace_otx2_msg_interrupt(mbox->mbox.pdev, "AF to PF", BIT_ULL(0));
+
 	otx2_queue_work(mbox, pf->mbox_wq, 0, 1, 1, TYPE_PFAF);
 
 	return IRQ_HANDLED;
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
index 70e0d4c..32daa3e 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
@@ -187,6 +187,8 @@ static irqreturn_t otx2vf_vfaf_mbox_intr_handler(int irq, void *vf_irq)
 	mdev = &mbox->dev[0];
 	otx2_sync_mbox_bbuf(mbox, 0);
 
+	trace_otx2_msg_interrupt(mbox->pdev, "PF to VF", BIT_ULL(0));
+
 	hdr = (struct mbox_hdr *)(mdev->mbase + mbox->rx_start);
 	if (hdr->num_msgs) {
 		vf->mbox.num_msgs = hdr->num_msgs;
-- 
2.7.4

Re: [net-next v3 PATCH 0/2] Introduce mbox tracepoints for Octeontx2

[David Miller]

From: sundeep.lkml@gmail.com
Date: Tue, 22 Sep 2020 08:27:03 +0530

> This patchset adds tracepoints support for mailbox.
 ...

Series applied, thank you.