netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jay Vosburgh <jay.vosburgh@canonical.com>
To: Hangbin Liu <liuhangbin@gmail.com>
Cc: netdev@vger.kernel.org, "David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Jonathan Toppins <jtoppins@redhat.com>,
	Paolo Abeni <pabeni@redhat.com>,
	Eric Dumazet <edumazet@google.com>, Liang Li <liali@redhat.com>,
	Simon Horman <simon.horman@corigine.com>,
	Miroslav Lichvar <mlichvar@redhat.com>
Subject: Re: [PATCHv4 net-next] bonding: add software tx timestamping support
Date: Fri, 14 Apr 2023 13:13:10 -0700	[thread overview]
Message-ID: <16053.1681503190@famine> (raw)
In-Reply-To: <20230414083526.1984362-1-liuhangbin@gmail.com>

Hangbin Liu <liuhangbin@gmail.com> wrote:

>Currently, bonding only obtain the timestamp (ts) information of
>the active slave, which is available only for modes 1, 5, and 6.
>For other modes, bonding only has software rx timestamping support.
>
>However, some users who use modes such as LACP also want tx timestamp
>support. To address this issue, let's check the ts information of each
>slave. If all slaves support tx timestamping, we can enable tx
>timestamping support for the bond.
>
>Suggested-by: Miroslav Lichvar <mlichvar@redhat.com>
>Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>

Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>

	-J

>---
>v4: add ASSERT_RTNL to make sure bond_ethtool_get_ts_info() called via
>    RTNL. Only check _TX_SOFTWARE for the slaves.
>v3: remove dev_hold/dev_put. remove the '\' for line continuation.
>v2: check each slave's ts info to make sure bond support sw tx
>    timestamping
>---
> drivers/net/bonding/bond_main.c | 32 ++++++++++++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
>
>diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
>index 00646aa315c3..9cf49b61f4b3 100644
>--- a/drivers/net/bonding/bond_main.c
>+++ b/drivers/net/bonding/bond_main.c
>@@ -5686,11 +5686,17 @@ static int bond_ethtool_get_ts_info(struct net_device *bond_dev,
> 				    struct ethtool_ts_info *info)
> {
> 	struct bonding *bond = netdev_priv(bond_dev);
>+	struct ethtool_ts_info ts_info;
> 	const struct ethtool_ops *ops;
> 	struct net_device *real_dev;
>+	bool sw_tx_support = false;
> 	struct phy_device *phydev;
>+	struct list_head *iter;
>+	struct slave *slave;
> 	int ret = 0;
> 
>+	ASSERT_RTNL();
>+
> 	rcu_read_lock();
> 	real_dev = bond_option_active_slave_get_rcu(bond);
> 	dev_hold(real_dev);
>@@ -5707,10 +5713,36 @@ static int bond_ethtool_get_ts_info(struct net_device *bond_dev,
> 			ret = ops->get_ts_info(real_dev, info);
> 			goto out;
> 		}
>+	} else {
>+		/* Check if all slaves support software tx timestamping */
>+		rcu_read_lock();
>+		bond_for_each_slave_rcu(bond, slave, iter) {
>+			ret = -1;
>+			ops = slave->dev->ethtool_ops;
>+			phydev = slave->dev->phydev;
>+
>+			if (phy_has_tsinfo(phydev))
>+				ret = phy_ts_info(phydev, &ts_info);
>+			else if (ops->get_ts_info)
>+				ret = ops->get_ts_info(slave->dev, &ts_info);
>+
>+			if (!ret && (ts_info.so_timestamping & SOF_TIMESTAMPING_TX_SOFTWARE)) {
>+				sw_tx_support = true;
>+				continue;
>+			}
>+
>+			sw_tx_support = false;
>+			break;
>+		}
>+		rcu_read_unlock();
> 	}
> 
>+	ret = 0;
> 	info->so_timestamping = SOF_TIMESTAMPING_RX_SOFTWARE |
> 				SOF_TIMESTAMPING_SOFTWARE;
>+	if (sw_tx_support)
>+		info->so_timestamping |= SOF_TIMESTAMPING_TX_SOFTWARE;
>+
> 	info->phc_index = -1;
> 
> out:
>-- 
>2.38.1
>

  reply	other threads:[~2023-04-14 20:13 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-14  8:35 [PATCHv4 net-next] bonding: add software tx timestamping support Hangbin Liu
2023-04-14 20:13 ` Jay Vosburgh [this message]
2023-04-15  1:02 ` Jakub Kicinski
2023-04-15  3:43   ` Jay Vosburgh
2023-04-17  0:17     ` Hangbin Liu
2023-04-17 18:47       ` Jakub Kicinski
2023-04-16 23:08   ` Hangbin Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=16053.1681503190@famine \
    --to=jay.vosburgh@canonical.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=jtoppins@redhat.com \
    --cc=kuba@kernel.org \
    --cc=liali@redhat.com \
    --cc=liuhangbin@gmail.com \
    --cc=mlichvar@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=simon.horman@corigine.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).