From: Michael Chan <michael.chan@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, kuba@kernel.org,
Pavan Chebbi <pavan.chebbi@broadcom.com>
Subject: [PATCH net-next 3/5] bnxt_en: Restructure bnxt_flash_package_from_fw_obj() to execute in a loop.
Date: Sun, 13 Dec 2020 06:51:44 -0500 [thread overview]
Message-ID: <1607860306-17244-4-git-send-email-michael.chan@broadcom.com> (raw)
In-Reply-To: <1607860306-17244-1-git-send-email-michael.chan@broadcom.com>
From: Pavan Chebbi <pavan.chebbi@broadcom.com>
On NICs with a smaller NVRAM, FW installation may fail after multiple
updates due to fragmentation. The driver can retry when FW returns
a special error code. To faciliate the retry, we restructure the
logic that performs the flashing in a loop. The actual retry logic
will be added in the next patch.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
.../net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 60 +++++++++----------
1 file changed, 28 insertions(+), 32 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 7635ff84b928..fa4f9941498e 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -2461,58 +2461,54 @@ int bnxt_flash_package_from_fw_obj(struct net_device *dev, const struct firmware
install_type >>= 16;
install.install_type = cpu_to_le32(install_type);
- rc = bnxt_find_nvram_item(dev, BNX_DIR_TYPE_UPDATE,
- BNX_DIR_ORDINAL_FIRST, BNX_DIR_EXT_NONE,
- &index, &item_len, NULL);
- if (rc) {
- netdev_err(dev, "PKG update area not created in nvram\n");
- return rc;
- }
+ do {
+ rc = bnxt_find_nvram_item(dev, BNX_DIR_TYPE_UPDATE,
+ BNX_DIR_ORDINAL_FIRST,
+ BNX_DIR_EXT_NONE,
+ &index, &item_len, NULL);
+ if (rc) {
+ netdev_err(dev, "PKG update area not created in nvram\n");
+ break;
+ }
+ if (fw->size > item_len) {
+ netdev_err(dev, "PKG insufficient update area in nvram: %lu\n",
+ (unsigned long)fw->size);
+ rc = -EFBIG;
+ break;
+ }
- if (fw->size > item_len) {
- netdev_err(dev, "PKG insufficient update area in nvram: %lu\n",
- (unsigned long)fw->size);
- rc = -EFBIG;
- } else {
modify.dir_idx = cpu_to_le16(index);
modify.len = cpu_to_le32(fw->size);
memcpy(kmem, fw->data, fw->size);
rc = hwrm_send_message(bp, &modify, sizeof(modify),
FLASH_PACKAGE_TIMEOUT);
- }
- if (rc)
- goto err_exit;
-
- mutex_lock(&bp->hwrm_cmd_lock);
- rc = _hwrm_send_message(bp, &install, sizeof(install),
- INSTALL_PACKAGE_TIMEOUT);
- memcpy(&resp, bp->hwrm_cmd_resp_addr, sizeof(resp));
+ if (rc)
+ break;
- if (rc) {
- u8 error_code = ((struct hwrm_err_output *)&resp)->cmd_err;
+ mutex_lock(&bp->hwrm_cmd_lock);
+ rc = _hwrm_send_message(bp, &install, sizeof(install),
+ INSTALL_PACKAGE_TIMEOUT);
+ memcpy(&resp, bp->hwrm_cmd_resp_addr, sizeof(resp));
- if (resp.error_code && error_code ==
+ if (rc && ((struct hwrm_err_output *)&resp)->cmd_err ==
NVM_INSTALL_UPDATE_CMD_ERR_CODE_FRAG_ERR) {
- install.flags |= cpu_to_le16(
- NVM_INSTALL_UPDATE_REQ_FLAGS_ALLOWED_TO_DEFRAG);
+ install.flags |=
+ cpu_to_le16(NVM_INSTALL_UPDATE_REQ_FLAGS_ALLOWED_TO_DEFRAG);
+
rc = _hwrm_send_message(bp, &install, sizeof(install),
INSTALL_PACKAGE_TIMEOUT);
memcpy(&resp, bp->hwrm_cmd_resp_addr, sizeof(resp));
}
- if (rc)
- goto flash_pkg_exit;
- }
+ mutex_unlock(&bp->hwrm_cmd_lock);
+ } while (false);
+ dma_free_coherent(&bp->pdev->dev, fw->size, kmem, dma_handle);
if (resp.result) {
netdev_err(dev, "PKG install error = %d, problem_item = %d\n",
(s8)resp.result, (int)resp.problem_item);
rc = -ENOPKG;
}
-flash_pkg_exit:
- mutex_unlock(&bp->hwrm_cmd_lock);
-err_exit:
- dma_free_coherent(&bp->pdev->dev, fw->size, kmem, dma_handle);
if (rc == -EACCES)
bnxt_print_admin_err(bp);
return rc;
--
2.18.1
next prev parent reply other threads:[~2020-12-13 12:00 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-13 11:51 [PATCH net-next 0/5] bnxt_en: Improve firmware flashing Michael Chan
2020-12-13 11:51 ` [PATCH net-next 1/5] bnxt_en: Refactor bnxt_flash_nvram Michael Chan
2020-12-13 11:51 ` [PATCH net-next 2/5] bnxt_en: Rearrange the logic in bnxt_flash_package_from_fw_obj() Michael Chan
2020-12-13 11:51 ` Michael Chan [this message]
2020-12-13 11:51 ` [PATCH net-next 4/5] bnxt_en: Retry installing FW package under NO_SPACE error condition Michael Chan
2020-12-13 11:51 ` [PATCH net-next 5/5] bnxt_en: Enable batch mode when using HWRM_NVM_MODIFY to flash packages Michael Chan
2020-12-15 3:10 ` [PATCH net-next 0/5] bnxt_en: Improve firmware flashing patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1607860306-17244-4-git-send-email-michael.chan@broadcom.com \
--to=michael.chan@broadcom.com \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pavan.chebbi@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).