From: Aya Levin <ayal@nvidia.com>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>
Cc: Daniel Axtens <dja@axtens.net>,
netdev@vger.kernel.org, Moshe Shemesh <moshe@mellanox.com>,
Tariq Toukan <tariqt@nvidia.com>, Aya Levin <ayal@nvidia.com>
Subject: [PATCH net] net: ipv6: Validate GSO SKB before finish IPv6 processing
Date: Wed, 30 Dec 2020 14:23:48 +0200 [thread overview]
Message-ID: <1609331028-2566-1-git-send-email-ayal@nvidia.com> (raw)
There are cases where GSO segment's length exceeds the egress MTU.
If so:
- Consume the SKB and its segments.
- Issue an ICMP packet with 'Packet Too Big' message containing the
MTU, allowing the source host to reduce its Path MTU appropriately.
Note: These cases are handled in the same manner in IPv4 output finish.
This patch aligns the behavior of IPv6 and IPv4.
Fixes: 9e50849054a4 ("netfilter: ipv6: move POSTROUTING invocation before fragmentation")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
---
net/ipv6/ip6_output.c | 41 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 40 insertions(+), 1 deletion(-)
Hi,
Please queue to -stable >= v2.6.35.
Daniel Axtens, does this solve the issue referred in your commit?
8914a595110a bnx2x: disable GSO where gso_size is too big for hardware
Thanks,
Aya
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 749ad72386b2..36466f2211bd 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -125,8 +125,43 @@ static int ip6_finish_output2(struct net *net, struct sock *sk, struct sk_buff *
return -EINVAL;
}
+static int
+ip6_finish_output_gso_slowpath_drop(struct net *net, struct sock *sk,
+ struct sk_buff *skb, unsigned int mtu)
+{
+ struct sk_buff *segs, *nskb;
+ netdev_features_t features;
+ int ret;
+
+ /* Please see corresponding comment in ip_finish_output_gso
+ * describing the cases where GSO segment length exceeds the
+ * egress MTU.
+ */
+ features = netif_skb_features(skb);
+ segs = skb_gso_segment(skb, features & ~NETIF_F_GSO_MASK);
+ if (IS_ERR_OR_NULL(segs)) {
+ kfree_skb(skb);
+ return -ENOMEM;
+ }
+
+ consume_skb(skb);
+
+ skb_list_walk_safe(segs, segs, nskb) {
+ int err;
+
+ skb_mark_not_on_list(segs);
+ err = ip6_fragment(net, sk, segs, ip6_finish_output2);
+ if (err && ret == 0)
+ ret = err;
+ }
+
+ return ret;
+}
+
static int __ip6_finish_output(struct net *net, struct sock *sk, struct sk_buff *skb)
{
+ unsigned int mtu;
+
#if defined(CONFIG_NETFILTER) && defined(CONFIG_XFRM)
/* Policy lookup after SNAT yielded a new policy */
if (skb_dst(skb)->xfrm) {
@@ -135,7 +170,11 @@ static int __ip6_finish_output(struct net *net, struct sock *sk, struct sk_buff
}
#endif
- if ((skb->len > ip6_skb_dst_mtu(skb) && !skb_is_gso(skb)) ||
+ mtu = ip6_skb_dst_mtu(skb);
+ if (skb_is_gso(skb) && !skb_gso_validate_network_len(skb, mtu))
+ return ip6_finish_output_gso_slowpath_drop(net, sk, skb, mtu);
+
+ if ((skb->len > mtu && !skb_is_gso(skb)) ||
dst_allfrag(skb_dst(skb)) ||
(IP6CB(skb)->frag_max_size && skb->len > IP6CB(skb)->frag_max_size))
return ip6_fragment(net, sk, skb, ip6_finish_output2);
--
2.14.1
next reply other threads:[~2020-12-30 12:25 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-30 12:23 Aya Levin [this message]
2020-12-31 13:49 ` [PATCH net] net: ipv6: Validate GSO SKB before finish IPv6 processing Daniel Axtens
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1609331028-2566-1-git-send-email-ayal@nvidia.com \
--to=ayal@nvidia.com \
--cc=davem@davemloft.net \
--cc=dja@axtens.net \
--cc=kuba@kernel.org \
--cc=moshe@mellanox.com \
--cc=netdev@vger.kernel.org \
--cc=tariqt@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).