From: Guangbin Huang <huangguangbin2@huawei.com>
To: <davem@davemloft.net>, <kuba@kernel.org>, <xie.he.0141@gmail.com>,
<ms@dev.tdt.de>, <willemb@google.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<lipeng321@huawei.com>, <huangguangbin2@huawei.com>
Subject: [PATCH net-next 1/8] net: ixp4xx_hss: remove redundant blank lines
Date: Thu, 10 Jun 2021 15:19:58 +0800 [thread overview]
Message-ID: <1623309605-15671-2-git-send-email-huangguangbin2@huawei.com> (raw)
In-Reply-To: <1623309605-15671-1-git-send-email-huangguangbin2@huawei.com>
From: Peng Li <lipeng321@huawei.com>
This patch removes some redundant blank lines.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
---
drivers/net/wan/ixp4xx_hss.c | 11 -----------
1 file changed, 11 deletions(-)
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index ecea09f..2c135a9 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -83,7 +83,6 @@
#define PKT_HDLC_CRC_32 0x2 /* default = CRC-16 */
#define PKT_HDLC_MSB_ENDIAN 0x4 /* default = LE */
-
/* hss_config, PCRs */
/* Frame sync sampling, default = active low */
#define PCR_FRM_SYNC_ACTIVE_HIGH 0x40000000
@@ -150,7 +149,6 @@
/* HSS number, default = 0 (first) */
#define CCR_SECOND_HSS 0x01000000
-
/* hss_config, clkCR: main:10, num:10, denom:12 */
#define CLK42X_SPEED_EXP ((0x3FF << 22) | ( 2 << 12) | 15) /*65 KHz*/
@@ -208,7 +206,6 @@
#define HSS_CONFIG_TX_LUT 0x18 /* channel look-up tables */
#define HSS_CONFIG_RX_LUT 0x38
-
/* NPE command codes */
/* writes the ConfigWord value to the location specified by offset */
#define PORT_CONFIG_WRITE 0x40
@@ -240,7 +237,6 @@
#define ERR_HDLC_ABORT 6 /* abort sequence received */
#define ERR_DISCONNECTING 7 /* disconnect is in progress */
-
#ifdef __ARMEB__
typedef struct sk_buff buffer_t;
#define free_buffer dev_kfree_skb
@@ -308,7 +304,6 @@ struct desc {
u32 __reserved1[4];
};
-
#define rx_desc_phys(port, n) ((port)->desc_tab_phys + \
(n) * sizeof(struct desc))
#define rx_desc_ptr(port, n) (&(port)->desc_tab[n])
@@ -567,7 +562,6 @@ static inline void debug_pkt(struct net_device *dev, const char *func,
#endif
}
-
static inline void debug_desc(u32 phys, struct desc *desc)
{
#if DEBUG_DESC
@@ -606,7 +600,6 @@ static inline void queue_put_desc(unsigned int queue, u32 phys,
length and queues >= 32 don't support this check anyway. */
}
-
static inline void dma_unmap_tx(struct port *port, struct desc *desc)
{
#ifdef __ARMEB__
@@ -619,7 +612,6 @@ static inline void dma_unmap_tx(struct port *port, struct desc *desc)
#endif
}
-
static void hss_hdlc_set_carrier(void *pdev, int carrier)
{
struct net_device *netdev = pdev;
@@ -784,7 +776,6 @@ static int hss_hdlc_poll(struct napi_struct *napi, int budget)
return received; /* not all work done */
}
-
static void hss_hdlc_txdone_irq(void *pdev)
{
struct net_device *dev = pdev;
@@ -910,7 +901,6 @@ static int hss_hdlc_xmit(struct sk_buff *skb, struct net_device *dev)
return NETDEV_TX_OK;
}
-
static int request_hdlc_queues(struct port *port)
{
int err;
@@ -1160,7 +1150,6 @@ static int hss_hdlc_close(struct net_device *dev)
return 0;
}
-
static int hss_hdlc_attach(struct net_device *dev, unsigned short encoding,
unsigned short parity)
{
--
2.8.1
next prev parent reply other threads:[~2021-06-10 7:23 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-10 7:19 [PATCH net-next 0/8] net: ixp4xx_hss: clean up some code style issues Guangbin Huang
2021-06-10 7:19 ` Guangbin Huang [this message]
2021-06-10 7:19 ` [PATCH net-next 2/8] net: ixp4xx_hss: add blank line after declarations Guangbin Huang
2021-06-10 7:20 ` [PATCH net-next 3/8] net: ixp4xx_hss: fix the code style issue about "foo* bar" Guangbin Huang
2021-06-10 7:20 ` [PATCH net-next 4/8] net: ixp4xx_hss: move out assignment in if condition Guangbin Huang
2021-06-10 7:20 ` [PATCH net-next 5/8] net: ixp4xx_hss: add some required spaces Guangbin Huang
2021-06-10 7:20 ` [PATCH net-next 6/8] net: ixp4xx_hss: remove redundant spaces Guangbin Huang
2021-06-10 7:20 ` [PATCH net-next 7/8] net: ixp4xx_hss: fix the comments style issue Guangbin Huang
2021-06-10 7:20 ` [PATCH net-next 8/8] net: ixp4xx_hss: add braces {} to all arms of the statement Guangbin Huang
2021-06-10 21:00 ` [PATCH net-next 0/8] net: ixp4xx_hss: clean up some code style issues patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1623309605-15671-2-git-send-email-huangguangbin2@huawei.com \
--to=huangguangbin2@huawei.com \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lipeng321@huawei.com \
--cc=ms@dev.tdt.de \
--cc=netdev@vger.kernel.org \
--cc=willemb@google.com \
--cc=xie.he.0141@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).