[PATCH net-next 7/8] net: phy: remove unnecessary line continuation

[Weihang Li <liweihang@huawei.com>]

From: Wenpeng Liang <liangwenpeng@huawei.com>

Avoid unnecessary line continuations.

Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
---
 drivers/net/phy/dp83640.c | 4 ++--
 drivers/net/phy/et1011c.c | 6 +++---
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 10769bf..705c166 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -170,9 +170,9 @@ static ushort gpio_tab[GPIO_TABLE_SIZE] = {
 module_param(chosen_phy, int, 0444);
 module_param_array(gpio_tab, ushort, NULL, 0444);
 
-MODULE_PARM_DESC(chosen_phy, \
+MODULE_PARM_DESC(chosen_phy,
 	"The address of the PHY to use for the ancillary clock features");
-MODULE_PARM_DESC(gpio_tab, \
+MODULE_PARM_DESC(gpio_tab,
 	"Which GPIO line to use for which purpose: cal,perout,extts1,...,extts6");
 
 static void dp83640_gpio_defaults(struct ptp_pin_desc *pd)
diff --git a/drivers/net/phy/et1011c.c b/drivers/net/phy/et1011c.c
index 4b3d035..72f51b7 100644
--- a/drivers/net/phy/et1011c.c
+++ b/drivers/net/phy/et1011c.c
@@ -74,9 +74,9 @@ static int et1011c_read_status(struct phy_device *phydev)
 					ET1011C_GIGABIT_SPEED) {
 			val = phy_read(phydev, ET1011C_CONFIG_REG);
 			val &= ~ET1011C_TX_FIFO_MASK;
-			phy_write(phydev, ET1011C_CONFIG_REG, val\
-					| ET1011C_GMII_INTERFACE\
-					| ET1011C_SYS_CLK_EN\
+			phy_write(phydev, ET1011C_CONFIG_REG, val
+					| ET1011C_GMII_INTERFACE
+					| ET1011C_SYS_CLK_EN
 					| ET1011C_TX_FIFO_DEPTH_16);
 
 		}
-- 
2.8.1