Re: [net-next 2/2] dt-bindings: net: adin1110: Add docs

[Rob Herring <robh@kernel.org>]

On Fri, 24 Jun 2022 23:06:28 +0300, alexandru.tachici@analog.com wrote:
> From: Alexandru Tachici <alexandru.tachici@analog.com>
> 
> Add bindings for the ADIN1110/2111 MAC-PHY/SWITCH.
> 
> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
> ---
>  .../devicetree/bindings/net/adi,adin1110.yaml | 127 ++++++++++++++++++
>  1 file changed, 127 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/adi,adin1110.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/net/adi,adin1110.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/net/spi-controller.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/adi,adin1110.example.dtb: ethernet@0: False schema does not allow {'compatible': ['adi,adin2111'], 'reg': [[0]], 'spi-max-frequency': [[24500000]], 'adi,spi-crc': True, '#address-cells': [[1]], '#size-cells': [[0]], 'interrupts': [[25, 2]], 'mac-address': [[202, 47, 183, 16, 35, 99]], 'phy@0': {'#phy-cells': [[0]], 'compatible': ['ethernet-phy-id0283.bca1'], 'reg': [[0]]}, 'phy@1': {'#phy-cells': [[0]], 'compatible': ['ethernet-phy-id0283.bca1'], 'reg': [[1]]}, '$nodename': ['ethernet@0']}
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/adi,adin1110.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.