[PATCH net-next v7 0/6] net: dsa: microchip: add MTU support for KSZ8 series

[PATCH net-next v7 0/6] net: dsa: microchip: add MTU support for KSZ8 series

[Oleksij Rempel]

changes v7:
- add Acked-bys and Reviewed-bys

changes v6:
- move dsa configuration to ksz8_setup 

changes v5:
- add mtu normalization patch

changes v4:
- remove per port max_frame cache
- remove port variable for ksz88* variants
- add KSZ9563_CHIP_ID
- not start a new line with an operator

changes v3:
- rename KSZ8863_LEGAL_PACKET_SIZE -> KSZ8_LEGAL_PACKET_SIZE

changes v2:
- add ksz_rmw8() helper
- merge all max MTUs to one location

Oleksij Rempel (6):
  net: dsa: microchip: move max mtu to one location
  net: dsa: microchip: do not store max MTU for all ports
  net: dsa: microchip: add ksz_rmw8() function
  net: dsa: microchip: ksz8: add MTU configuration support
  net: dsa: microchip: enable MTU normalization for KSZ8795 and KSZ9477
    compatible switches
  net: dsa: microchip: ksz8: move all DSA configurations to one location

 drivers/net/dsa/microchip/ksz8.h        |  1 +
 drivers/net/dsa/microchip/ksz8795.c     | 75 +++++++++++++++++++++----
 drivers/net/dsa/microchip/ksz8795_reg.h |  3 +
 drivers/net/dsa/microchip/ksz9477.c     | 21 +++----
 drivers/net/dsa/microchip/ksz9477.h     |  1 -
 drivers/net/dsa/microchip/ksz9477_reg.h |  2 -
 drivers/net/dsa/microchip/ksz_common.c  | 29 ++++++++--
 drivers/net/dsa/microchip/ksz_common.h  | 13 ++++-
 8 files changed, 109 insertions(+), 36 deletions(-)

-- 
2.30.2

[PATCH net-next v7 1/6] net: dsa: microchip: move max mtu to one location

[Oleksij Rempel]

There are no HW specific registers, so we can process all of them
in one location.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Tested-by: Arun Ramadoss <arun.ramadoss@microchip.com> (KSZ9893 and LAN937x)
---
 drivers/net/dsa/microchip/ksz9477.c     |  5 -----
 drivers/net/dsa/microchip/ksz9477.h     |  1 -
 drivers/net/dsa/microchip/ksz9477_reg.h |  2 --
 drivers/net/dsa/microchip/ksz_common.c  | 22 +++++++++++++++++-----
 drivers/net/dsa/microchip/ksz_common.h  |  3 ++-
 5 files changed, 19 insertions(+), 14 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 0d6b40968657..602d00671bef 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -60,11 +60,6 @@ int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu)
 				  REG_SW_MTU_MASK, max_frame);
 }
 
-int ksz9477_max_mtu(struct ksz_device *dev, int port)
-{
-	return KSZ9477_MAX_FRAME_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
-}
-
 static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev)
 {
 	unsigned int val;
diff --git a/drivers/net/dsa/microchip/ksz9477.h b/drivers/net/dsa/microchip/ksz9477.h
index 00862c4cfb7f..7c5bb3032772 100644
--- a/drivers/net/dsa/microchip/ksz9477.h
+++ b/drivers/net/dsa/microchip/ksz9477.h
@@ -50,7 +50,6 @@ int ksz9477_mdb_add(struct ksz_device *dev, int port,
 int ksz9477_mdb_del(struct ksz_device *dev, int port,
 		    const struct switchdev_obj_port_mdb *mdb, struct dsa_db db);
 int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu);
-int ksz9477_max_mtu(struct ksz_device *dev, int port);
 void ksz9477_config_cpu_port(struct dsa_switch *ds);
 int ksz9477_enable_stp_addr(struct ksz_device *dev);
 int ksz9477_reset_switch(struct ksz_device *dev);
diff --git a/drivers/net/dsa/microchip/ksz9477_reg.h b/drivers/net/dsa/microchip/ksz9477_reg.h
index 53c68d286dd3..cc457fa64939 100644
--- a/drivers/net/dsa/microchip/ksz9477_reg.h
+++ b/drivers/net/dsa/microchip/ksz9477_reg.h
@@ -1615,6 +1615,4 @@
 #define PTP_TRIG_UNIT_M			(BIT(MAX_TRIG_UNIT) - 1)
 #define PTP_TS_UNIT_M			(BIT(MAX_TIMESTAMP_UNIT) - 1)
 
-#define KSZ9477_MAX_FRAME_SIZE		9000
-
 #endif /* KSZ9477_REGS_H */
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 8c8db315317d..49a5a236d958 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -14,6 +14,7 @@
 #include <linux/phy.h>
 #include <linux/etherdevice.h>
 #include <linux/if_bridge.h>
+#include <linux/if_vlan.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
 #include <linux/of_mdio.h>
@@ -206,7 +207,6 @@ static const struct ksz_dev_ops ksz9477_dev_ops = {
 	.mdb_add = ksz9477_mdb_add,
 	.mdb_del = ksz9477_mdb_del,
 	.change_mtu = ksz9477_change_mtu,
-	.max_mtu = ksz9477_max_mtu,
 	.phylink_mac_link_up = ksz9477_phylink_mac_link_up,
 	.config_cpu_port = ksz9477_config_cpu_port,
 	.enable_stp_addr = ksz9477_enable_stp_addr,
@@ -243,7 +243,6 @@ static const struct ksz_dev_ops lan937x_dev_ops = {
 	.mdb_add = ksz9477_mdb_add,
 	.mdb_del = ksz9477_mdb_del,
 	.change_mtu = lan937x_change_mtu,
-	.max_mtu = ksz9477_max_mtu,
 	.phylink_mac_link_up = ksz9477_phylink_mac_link_up,
 	.config_cpu_port = lan937x_config_cpu_port,
 	.enable_stp_addr = ksz9477_enable_stp_addr,
@@ -2500,10 +2499,23 @@ static int ksz_max_mtu(struct dsa_switch *ds, int port)
 {
 	struct ksz_device *dev = ds->priv;
 
-	if (!dev->dev_ops->max_mtu)
-		return -EOPNOTSUPP;
+	switch (dev->chip_id) {
+	case KSZ8563_CHIP_ID:
+	case KSZ9477_CHIP_ID:
+	case KSZ9563_CHIP_ID:
+	case KSZ9567_CHIP_ID:
+	case KSZ9893_CHIP_ID:
+	case KSZ9896_CHIP_ID:
+	case KSZ9897_CHIP_ID:
+	case LAN9370_CHIP_ID:
+	case LAN9371_CHIP_ID:
+	case LAN9372_CHIP_ID:
+	case LAN9373_CHIP_ID:
+	case LAN9374_CHIP_ID:
+		return KSZ9477_MAX_FRAME_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
+	}
 
-	return dev->dev_ops->max_mtu(dev, port);
+	return -EOPNOTSUPP;
 }
 
 static void ksz_set_xmii(struct ksz_device *dev, int port,
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index c6726cbd5465..27c26ee15af4 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -322,7 +322,6 @@ struct ksz_dev_ops {
 	void (*get_caps)(struct ksz_device *dev, int port,
 			 struct phylink_config *config);
 	int (*change_mtu)(struct ksz_device *dev, int port, int mtu);
-	int (*max_mtu)(struct ksz_device *dev, int port);
 	void (*freeze_mib)(struct ksz_device *dev, int port, bool freeze);
 	void (*port_init_cnt)(struct ksz_device *dev, int port);
 	void (*phylink_mac_config)(struct ksz_device *dev, int port,
@@ -588,6 +587,8 @@ static inline int is_lan937x(struct ksz_device *dev)
 
 #define PORT_SRC_PHY_INT		1
 
+#define KSZ9477_MAX_FRAME_SIZE		9000
+
 /* Regmap tables generation */
 #define KSZ_SPI_OP_RD		3
 #define KSZ_SPI_OP_WR		2
-- 
2.30.2

[PATCH net-next v7 2/6] net: dsa: microchip: do not store max MTU for all ports

[Oleksij Rempel]

If we have global MTU configuration, it is enough to configure it on CPU
port only.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/microchip/ksz9477.c    | 14 +++++---------
 drivers/net/dsa/microchip/ksz_common.h |  1 -
 2 files changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 602d00671bef..f6e7968ab105 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -45,19 +45,15 @@ static void ksz9477_port_cfg32(struct ksz_device *dev, int port, int offset,
 
 int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu)
 {
-	u16 frame_size, max_frame = 0;
-	int i;
-
-	frame_size = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+	u16 frame_size;
 
-	/* Cache the per-port MTU setting */
-	dev->ports[port].max_frame = frame_size;
+	if (!dsa_is_cpu_port(dev->ds, port))
+		return 0;
 
-	for (i = 0; i < dev->info->port_cnt; i++)
-		max_frame = max(max_frame, dev->ports[i].max_frame);
+	frame_size = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
 
 	return regmap_update_bits(dev->regmap[1], REG_SW_MTU__2,
-				  REG_SW_MTU_MASK, max_frame);
+				  REG_SW_MTU_MASK, frame_size);
 }
 
 static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev)
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 27c26ee15af4..61228be299f9 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -95,7 +95,6 @@ struct ksz_port {
 
 	struct ksz_port_mib mib;
 	phy_interface_t interface;
-	u16 max_frame;
 	u32 rgmii_tx_val;
 	u32 rgmii_rx_val;
 	struct ksz_device *ksz_dev;
-- 
2.30.2

[PATCH net-next v7 3/6] net: dsa: microchip: add ksz_rmw8() function

[Oleksij Rempel]

Add ksz_rmw8(), it will be used in the next patch.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/microchip/ksz_common.h | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 61228be299f9..5f404a444ce1 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -454,6 +454,11 @@ static inline int ksz_write64(struct ksz_device *dev, u32 reg, u64 value)
 	return regmap_bulk_write(dev->regmap[2], reg, val, 2);
 }
 
+static inline int ksz_rmw8(struct ksz_device *dev, int offset, u8 mask, u8 val)
+{
+	return regmap_update_bits(dev->regmap[0], offset, mask, val);
+}
+
 static inline int ksz_pread8(struct ksz_device *dev, int port, int offset,
 			     u8 *data)
 {
-- 
2.30.2

[PATCH net-next v7 4/6] net: dsa: microchip: ksz8: add MTU configuration support

[Oleksij Rempel]

Make MTU configurable on KSZ87xx and KSZ88xx series of switches.

Before this patch, pre-configured behavior was different on different
switch series, due to opposite meaning of the same bit:
- KSZ87xx: Reg 4, Bit 1 - if 1, max frame size is 1532; if 0 - 1514
- KSZ88xx: Reg 4, Bit 1 - if 1, max frame size is 1514; if 0 - 1532

Since the code was telling "... SW_LEGAL_PACKET_DISABLE, true)", I
assume, the idea was to set max frame size to 1532.

With this patch, by setting MTU size 1500, both switch series will be
configured to the 1532 frame limit.

This patch was tested on KSZ8873.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/microchip/ksz8.h        |  1 +
 drivers/net/dsa/microchip/ksz8795.c     | 53 ++++++++++++++++++++++++-
 drivers/net/dsa/microchip/ksz8795_reg.h |  3 ++
 drivers/net/dsa/microchip/ksz_common.c  |  7 ++++
 drivers/net/dsa/microchip/ksz_common.h  |  4 ++
 5 files changed, 66 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz8.h b/drivers/net/dsa/microchip/ksz8.h
index 8582b4b67d98..ea05abfbd51d 100644
--- a/drivers/net/dsa/microchip/ksz8.h
+++ b/drivers/net/dsa/microchip/ksz8.h
@@ -57,5 +57,6 @@ int ksz8_reset_switch(struct ksz_device *dev);
 int ksz8_switch_detect(struct ksz_device *dev);
 int ksz8_switch_init(struct ksz_device *dev);
 void ksz8_switch_exit(struct ksz_device *dev);
+int ksz8_change_mtu(struct ksz_device *dev, int port, int mtu);
 
 #endif
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index bd3b133e7085..d01bfd609130 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -76,6 +76,57 @@ int ksz8_reset_switch(struct ksz_device *dev)
 	return 0;
 }
 
+static int ksz8863_change_mtu(struct ksz_device *dev, int frame_size)
+{
+	u8 ctrl2 = 0;
+
+	if (frame_size <= KSZ8_LEGAL_PACKET_SIZE)
+		ctrl2 |= KSZ8863_LEGAL_PACKET_ENABLE;
+	else if (frame_size > KSZ8863_NORMAL_PACKET_SIZE)
+		ctrl2 |= KSZ8863_HUGE_PACKET_ENABLE;
+
+	return ksz_rmw8(dev, REG_SW_CTRL_2, KSZ8863_LEGAL_PACKET_ENABLE |
+			KSZ8863_HUGE_PACKET_ENABLE, ctrl2);
+}
+
+static int ksz8795_change_mtu(struct ksz_device *dev, int frame_size)
+{
+	u8 ctrl1 = 0, ctrl2 = 0;
+	int ret;
+
+	if (frame_size > KSZ8_LEGAL_PACKET_SIZE)
+		ctrl2 |= SW_LEGAL_PACKET_DISABLE;
+	else if (frame_size > KSZ8863_NORMAL_PACKET_SIZE)
+		ctrl1 |= SW_HUGE_PACKET;
+
+	ret = ksz_rmw8(dev, REG_SW_CTRL_1, SW_HUGE_PACKET, ctrl1);
+	if (ret)
+		return ret;
+
+	return ksz_rmw8(dev, REG_SW_CTRL_2, SW_LEGAL_PACKET_DISABLE, ctrl2);
+}
+
+int ksz8_change_mtu(struct ksz_device *dev, int port, int mtu)
+{
+	u16 frame_size;
+
+	if (!dsa_is_cpu_port(dev->ds, port))
+		return 0;
+
+	frame_size = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+
+	switch (dev->chip_id) {
+	case KSZ8795_CHIP_ID:
+	case KSZ8794_CHIP_ID:
+	case KSZ8765_CHIP_ID:
+		return ksz8795_change_mtu(dev, frame_size);
+	case KSZ8830_CHIP_ID:
+		return ksz8863_change_mtu(dev, frame_size);
+	}
+
+	return -EOPNOTSUPP;
+}
+
 static void ksz8795_set_prio_queue(struct ksz_device *dev, int port, int queue)
 {
 	u8 hi, lo;
@@ -1233,8 +1284,6 @@ void ksz8_config_cpu_port(struct dsa_switch *ds)
 	masks = dev->info->masks;
 	regs = dev->info->regs;
 
-	/* Switch marks the maximum frame with extra byte as oversize. */
-	ksz_cfg(dev, REG_SW_CTRL_2, SW_LEGAL_PACKET_DISABLE, true);
 	ksz_cfg(dev, regs[S_TAIL_TAG_CTRL], masks[SW_TAIL_TAG_ENABLE], true);
 
 	p = &dev->ports[dev->cpu_port];
diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h
index 77487d611824..7a57c6088f80 100644
--- a/drivers/net/dsa/microchip/ksz8795_reg.h
+++ b/drivers/net/dsa/microchip/ksz8795_reg.h
@@ -48,6 +48,9 @@
 #define NO_EXC_COLLISION_DROP		BIT(3)
 #define SW_LEGAL_PACKET_DISABLE		BIT(1)
 
+#define KSZ8863_HUGE_PACKET_ENABLE	BIT(2)
+#define KSZ8863_LEGAL_PACKET_ENABLE	BIT(1)
+
 #define REG_SW_CTRL_3			0x05
  #define WEIGHTED_FAIR_QUEUE_ENABLE	BIT(3)
 
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 49a5a236d958..f39b041765fb 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -172,6 +172,7 @@ static const struct ksz_dev_ops ksz8_dev_ops = {
 	.reset = ksz8_reset_switch,
 	.init = ksz8_switch_init,
 	.exit = ksz8_switch_exit,
+	.change_mtu = ksz8_change_mtu,
 };
 
 static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port,
@@ -2500,6 +2501,12 @@ static int ksz_max_mtu(struct dsa_switch *ds, int port)
 	struct ksz_device *dev = ds->priv;
 
 	switch (dev->chip_id) {
+	case KSZ8795_CHIP_ID:
+	case KSZ8794_CHIP_ID:
+	case KSZ8765_CHIP_ID:
+		return KSZ8795_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
+	case KSZ8830_CHIP_ID:
+		return KSZ8863_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
 	case KSZ8563_CHIP_ID:
 	case KSZ9477_CHIP_ID:
 	case KSZ9563_CHIP_ID:
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 5f404a444ce1..cb27f5a180c7 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -591,6 +591,10 @@ static inline int is_lan937x(struct ksz_device *dev)
 
 #define PORT_SRC_PHY_INT		1
 
+#define KSZ8795_HUGE_PACKET_SIZE	2000
+#define KSZ8863_HUGE_PACKET_SIZE	1916
+#define KSZ8863_NORMAL_PACKET_SIZE	1536
+#define KSZ8_LEGAL_PACKET_SIZE		1518
 #define KSZ9477_MAX_FRAME_SIZE		9000
 
 /* Regmap tables generation */
-- 
2.30.2

[PATCH net-next v7 5/6] net: dsa: microchip: enable MTU normalization for KSZ8795 and KSZ9477 compatible switches

[Oleksij Rempel]

KSZ8795 and KSZ9477 compatible series of switches use global max frame
size configuration register. So, enable MTU normalization for this reason.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
---
 drivers/net/dsa/microchip/ksz8795.c | 2 ++
 drivers/net/dsa/microchip/ksz9477.c | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index d01bfd609130..060e41b9b6ef 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -1357,6 +1357,8 @@ int ksz8_setup(struct dsa_switch *ds)
 	struct ksz_device *dev = ds->priv;
 	int i;
 
+	ds->mtu_enforcement_ingress = true;
+
 	ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_FLOW_CTRL, true);
 
 	/* Enable automatic fast aging when link changed detected. */
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index f6e7968ab105..47b54ecf2c6f 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -1134,6 +1134,8 @@ int ksz9477_setup(struct dsa_switch *ds)
 	struct ksz_device *dev = ds->priv;
 	int ret = 0;
 
+	ds->mtu_enforcement_ingress = true;
+
 	/* Required for port partitioning. */
 	ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY,
 		      true);
-- 
2.30.2

[PATCH net-next v7 6/6] net: dsa: microchip: ksz8: move all DSA configurations to one location

[Oleksij Rempel]

To make the code more comparable to KSZ9477 code, move DSA
configurations to the same location.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
---
 drivers/net/dsa/microchip/ksz8795.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 060e41b9b6ef..003b0ac2854c 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -1359,6 +1359,16 @@ int ksz8_setup(struct dsa_switch *ds)
 
 	ds->mtu_enforcement_ingress = true;
 
+	/* We rely on software untagging on the CPU port, so that we
+	 * can support both tagged and untagged VLANs
+	 */
+	ds->untag_bridge_pvid = true;
+
+	/* VLAN filtering is partly controlled by the global VLAN
+	 * Enable flag
+	 */
+	ds->vlan_filtering_is_global = true;
+
 	ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_FLOW_CTRL, true);
 
 	/* Enable automatic fast aging when link changed detected. */
@@ -1418,16 +1428,6 @@ int ksz8_switch_init(struct ksz_device *dev)
 	dev->phy_port_cnt = dev->info->port_cnt - 1;
 	dev->port_mask = (BIT(dev->phy_port_cnt) - 1) | dev->info->cpu_ports;
 
-	/* We rely on software untagging on the CPU port, so that we
-	 * can support both tagged and untagged VLANs
-	 */
-	dev->ds->untag_bridge_pvid = true;
-
-	/* VLAN filtering is partly controlled by the global VLAN
-	 * Enable flag
-	 */
-	dev->ds->vlan_filtering_is_global = true;
-
 	return 0;
 }
 
-- 
2.30.2

Re: [PATCH net-next v7 0/6] net: dsa: microchip: add MTU support for KSZ8 series

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (master)
by Paolo Abeni <pabeni@redhat.com>:

On Mon,  5 Dec 2022 06:22:26 +0100 you wrote:
> changes v7:
> - add Acked-bys and Reviewed-bys
> 
> changes v6:
> - move dsa configuration to ksz8_setup
> 
> changes v5:
> - add mtu normalization patch
> 
> [...]

Here is the summary with links:
  - [net-next,v7,1/6] net: dsa: microchip: move max mtu to one location
    https://git.kernel.org/netdev/net-next/c/838c19f89454
  - [net-next,v7,2/6] net: dsa: microchip: do not store max MTU for all ports
    https://git.kernel.org/netdev/net-next/c/1d0a1a6d0d63
  - [net-next,v7,3/6] net: dsa: microchip: add ksz_rmw8() function
    https://git.kernel.org/netdev/net-next/c/6f1b986a43ce
  - [net-next,v7,4/6] net: dsa: microchip: ksz8: add MTU configuration support
    https://git.kernel.org/netdev/net-next/c/29d1e85f45e0
  - [net-next,v7,5/6] net: dsa: microchip: enable MTU normalization for KSZ8795 and KSZ9477 compatible switches
    https://git.kernel.org/netdev/net-next/c/6b30cfa86ee7
  - [net-next,v7,6/6] net: dsa: microchip: ksz8: move all DSA configurations to one location
    https://git.kernel.org/netdev/net-next/c/55a952eef70a

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html