From: Robert Olsson <Robert.Olsson@data.slu.se>
To: sfeldma@pobox.com
Cc: Lennert Buytenhek <buytenh@wantstofly.org>,
jamal <hadi@cyberus.ca>,
Robert Olsson <Robert.Olsson@data.slu.se>,
P@draigBrady.com, mellia@prezzemolo.polito.it,
e1000-devel@lists.sourceforge.net,
Jorge Manuel Finochietto <jorge.finochietto@polito.it>,
Giulio Galante <galante@polito.it>,
netdev@oss.sgi.com
Subject: Re: [E1000-devel] Transmission limit
Date: Wed, 1 Dec 2004 16:34:12 +0100 [thread overview]
Message-ID: <16813.58484.343629.570703@robur.slu.se> (raw)
In-Reply-To: <1101863399.4663.54.camel@sfeldma-mobl.dsl-verizon.net>
Scott Feldman writes:
> Hey, turns out, I know some e1000 tricks that might help get the kpps
> numbers up.
>
> My problem is I only have a P4 desktop system with a 82544 nic running
> at PCI 32/33Mhz, so I can't play with the big boys. But, attached is a
> rework of the Tx path to eliminate 1) Tx interrupts, and 2) Tx
> descriptor write-backs. For me, I see a nice jump in kpps, but I'd like
> others to try with their setups. We should be able to get to wire speed
> with 60-byte packets.
>
> System: Intel 865 (HT 2.6Ghz)
> Nic: 82544 PCI 32-bit/33Mhz
> Driver: linux-2.6.9 e1000 (5.3.19-k2-NAPI), no Interrupt Delays
> 4096 descs
> pkt_size = 60: 541618pps 277Mb/sec errors: 914
Hello!
Nice but I no improvements w. 82546GB @ 133 MHz on 1.6 GHz Opteron it seems.
SMP kernel linux-2.6.9-rc2
Vanilla.
801077pps 410Mb/sec (410151424bps) errors: 95596
Patch TXD=4096
608690pps 311Mb/sec (311649280bps) errors: 0
Patch TXD=2048
624103pps 319Mb/sec (319540736bps) errors: 0
Patch TXD=1024
551289pps 282Mb/sec (282259968bps) errors: 4506
Error count is a bit confusing...
--ro
next prev parent reply other threads:[~2004-12-01 15:34 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1101467291.24742.70.camel@mellia.lipar.polito.it>
2004-11-26 14:05 ` [E1000-devel] Transmission limit P
2004-11-26 15:31 ` Marco Mellia
2004-11-26 19:56 ` jamal
2004-11-29 14:21 ` Marco Mellia
2004-11-30 13:46 ` jamal
2004-12-02 17:24 ` Marco Mellia
2004-11-26 20:06 ` jamal
2004-11-26 20:56 ` Lennert Buytenhek
2004-11-26 21:02 ` Lennert Buytenhek
2004-11-27 9:25 ` Harald Welte
[not found] ` <20041127111101.GC23139@xi.wantstofly.org>
2004-11-27 11:31 ` Harald Welte
2004-11-27 20:12 ` Cesar Marcondes
2004-11-29 8:53 ` Marco Mellia
2004-11-29 14:50 ` Lennert Buytenhek
2004-11-30 8:42 ` Marco Mellia
2004-12-01 12:25 ` jamal
2004-12-02 13:39 ` Marco Mellia
2004-12-03 13:07 ` jamal
2004-11-26 15:40 ` Robert Olsson
2004-11-26 15:59 ` Marco Mellia
2004-11-26 16:57 ` P
2004-11-26 20:01 ` jamal
2004-11-29 10:19 ` P
2004-11-29 13:09 ` Robert Olsson
2004-11-29 20:16 ` David S. Miller
2004-12-01 16:47 ` Robert Olsson
2004-11-30 13:31 ` jamal
2004-11-30 13:46 ` Lennert Buytenhek
2004-11-30 14:25 ` jamal
2004-12-01 0:11 ` Lennert Buytenhek
2004-12-01 1:09 ` Scott Feldman
2004-12-01 15:34 ` Robert Olsson [this message]
2004-12-01 16:49 ` Scott Feldman
2004-12-01 17:37 ` Robert Olsson
2004-12-02 17:54 ` Robert Olsson
2004-12-02 18:23 ` Robert Olsson
2004-12-02 23:25 ` Lennert Buytenhek
2004-12-03 5:23 ` Scott Feldman
2004-12-10 16:24 ` Martin Josefsson
2004-12-01 18:29 ` Lennert Buytenhek
2004-12-01 21:35 ` Lennert Buytenhek
2004-12-02 6:13 ` Scott Feldman
2004-12-03 13:24 ` jamal
2004-12-05 14:50 ` 1.03Mpps on e1000 (was: Re: [E1000-devel] Transmission limit) Lennert Buytenhek
2004-12-05 15:03 ` Martin Josefsson
2004-12-05 15:15 ` Lennert Buytenhek
2004-12-05 15:19 ` Martin Josefsson
2004-12-05 15:30 ` Martin Josefsson
2004-12-05 17:00 ` Lennert Buytenhek
2004-12-05 17:11 ` Martin Josefsson
2004-12-05 17:38 ` Martin Josefsson
2004-12-05 18:14 ` Lennert Buytenhek
2004-12-05 15:42 ` Martin Josefsson
2004-12-05 16:48 ` Martin Josefsson
2004-12-05 17:01 ` Martin Josefsson
2004-12-05 17:58 ` Lennert Buytenhek
2004-12-05 17:44 ` Lennert Buytenhek
2004-12-05 17:51 ` Lennert Buytenhek
2004-12-05 17:54 ` Martin Josefsson
2004-12-06 11:32 ` 1.03Mpps on e1000 (was: " jamal
2004-12-06 12:11 ` Lennert Buytenhek
2004-12-06 12:20 ` jamal
2004-12-06 12:23 ` Lennert Buytenhek
2004-12-06 12:30 ` Martin Josefsson
2004-12-06 13:11 ` jamal
[not found] ` <20041206132907.GA13411@xi.wantstofly.org>
[not found] ` <16820.37049.396306.295878@robur.slu.se>
2004-12-06 17:32 ` 1.03Mpps on e1000 (was: Re: [E1000-devel] " P
2004-12-08 23:36 ` Ray Lehtiniemi
[not found] ` <41B825A5.2000009@draigBrady.com>
[not found] ` <20041209161825.GA32454@mail.com>
2004-12-09 17:12 ` 1.03Mpps on e1000 P
[not found] ` <20041209164820.GB32454@mail.com>
2004-12-09 17:19 ` P
2004-12-09 23:25 ` Ray Lehtiniemi
2004-12-05 21:12 ` 1.03Mpps on e1000 (was: Re: [E1000-devel] Transmission limit) Scott Feldman
2004-12-05 21:25 ` Lennert Buytenhek
2004-12-06 1:23 ` 1.03Mpps on e1000 (was: " Scott Feldman
2004-12-02 17:31 ` [E1000-devel] Transmission limit Marco Mellia
2004-12-03 20:57 ` Lennert Buytenhek
2004-12-04 10:36 ` Lennert Buytenhek
2004-12-01 12:08 ` jamal
2004-12-01 15:24 ` Lennert Buytenhek
2004-11-26 17:58 ` Robert Olsson
2004-11-27 20:00 ` Lennert Buytenhek
2004-11-29 12:44 ` Marco Mellia
2004-11-29 15:19 ` Lennert Buytenhek
2004-11-29 17:32 ` Marco Mellia
2004-11-29 19:08 ` Lennert Buytenhek
2004-11-29 19:09 ` Lennert Buytenhek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=16813.58484.343629.570703@robur.slu.se \
--to=robert.olsson@data.slu.se \
--cc=P@draigBrady.com \
--cc=buytenh@wantstofly.org \
--cc=e1000-devel@lists.sourceforge.net \
--cc=galante@polito.it \
--cc=hadi@cyberus.ca \
--cc=jorge.finochietto@polito.it \
--cc=mellia@prezzemolo.polito.it \
--cc=netdev@oss.sgi.com \
--cc=sfeldma@pobox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).