Re: [PATCH net-next v8 2/9] dt-bindings: net: mvusb: Fix up DSA example

[Rob Herring <robh@kernel.org>]

On Tue, 14 Nov 2023 00:35:57 +0100, Linus Walleij wrote:
> When adding a proper schema for the Marvell mx88e6xxx switch,
> the scripts start complaining about this embedded example:
> 
>   dtschema/dtc warnings/errors:
>   net/marvell,mvusb.example.dtb: switch@0: ports: '#address-cells'
>   is a required property
>   from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml#
>   net/marvell,mvusb.example.dtb: switch@0: ports: '#size-cells'
>   is a required property
>   from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml#
> 
> Fix this up by extending the example with those properties in
> the ports node.
> 
> While we are at it, rename "ports" to "ethernet-ports" and rename
> "switch" to "ethernet-switch" as this is recommended practice.
> 
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
>  Documentation/devicetree/bindings/net/marvell,mvusb.yaml | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/net/marvell,mvusb.example.dtb: /example-0/usb/mdio@1/ethernet-switch@0: failed to match any schema with compatible: ['marvell,mv88e6190']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231114-marvell-88e6152-wan-led-v8-2-50688741691b@linaro.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.