[PATCH net-next 3/5] net: phy: don't change modes we don't care about in genphy_c45_read_lpa

[Heiner Kallweit <hkallweit1@gmail.com>]

Because 1000BaseT isn't covered by Clause 45, the 1000BaseT flags in
phydev->lp_advertising may have been set based on vendor registers
already. genphy_c45_read_lpa() would clear these flags as of today.
Therefore switch to mii_lpa_mod_linkmode_lpa_t.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 drivers/net/phy/phy-c45.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index ce5fa5346..65ee33e34 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -268,7 +268,7 @@ int genphy_c45_read_lpa(struct phy_device *phydev)
 	if (val < 0)
 		return val;
 
-	mii_lpa_to_linkmode_lpa_t(phydev->lp_advertising, val);
+	mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, val);
 	phydev->pause = val & LPA_PAUSE_CAP ? 1 : 0;
 	phydev->asym_pause = val & LPA_PAUSE_ASYM ? 1 : 0;
 
-- 
2.20.1