[PATCH net-next] net: enetc: allow phy-mode = "1000base-x"

[PATCH net-next] net: enetc: allow phy-mode = "1000base-x"

[Vladimir Oltean]

The driver code proper is handled by the lynx_pcs. The enetc just needs
to populate phylink's supported_interfaces array, and return true for
this phy-mode in enetc_port_has_pcs(), such that it creates an internal
MDIO bus through which the Lynx PCS registers are accessed.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 drivers/net/ethernet/freescale/enetc/enetc_pf.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
index c153dc083aff..11b14555802c 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
@@ -920,6 +920,7 @@ static void enetc_imdio_remove(struct enetc_pf *pf)
 static bool enetc_port_has_pcs(struct enetc_pf *pf)
 {
 	return (pf->if_mode == PHY_INTERFACE_MODE_SGMII ||
+		pf->if_mode == PHY_INTERFACE_MODE_1000BASEX ||
 		pf->if_mode == PHY_INTERFACE_MODE_2500BASEX ||
 		pf->if_mode == PHY_INTERFACE_MODE_USXGMII);
 }
@@ -1116,6 +1117,8 @@ static int enetc_phylink_create(struct enetc_ndev_priv *priv,
 		  pf->phylink_config.supported_interfaces);
 	__set_bit(PHY_INTERFACE_MODE_SGMII,
 		  pf->phylink_config.supported_interfaces);
+	__set_bit(PHY_INTERFACE_MODE_1000BASEX,
+		  pf->phylink_config.supported_interfaces);
 	__set_bit(PHY_INTERFACE_MODE_2500BASEX,
 		  pf->phylink_config.supported_interfaces);
 	__set_bit(PHY_INTERFACE_MODE_USXGMII,
-- 
2.34.1

Re: [PATCH net-next] net: enetc: allow phy-mode = "1000base-x"

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@kernel.org>:

On Wed,  3 Jan 2024 13:34:45 +0200 you wrote:
> The driver code proper is handled by the lynx_pcs. The enetc just needs
> to populate phylink's supported_interfaces array, and return true for
> this phy-mode in enetc_port_has_pcs(), such that it creates an internal
> MDIO bus through which the Lynx PCS registers are accessed.
> 
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> 
> [...]

Here is the summary with links:
  - [net-next] net: enetc: allow phy-mode = "1000base-x"
    https://git.kernel.org/netdev/net-next/c/14d0681b3ae2

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html