Re: [PATCH net v2] stmmac: Clear variable when destroying workqueue

[patchwork-bot+netdevbpf@kernel.org]

Hello:

This patch was applied to netdev/net.git (main)
by David S. Miller <davem@davemloft.net>:

On Mon, 26 Feb 2024 17:42:32 +0100 you wrote:
> Currently when suspending driver and stopping workqueue it is checked whether
> workqueue is not NULL and if so, it is destroyed.
> Function destroy_workqueue() does drain queue and does clear variable, but
> it does not set workqueue variable to NULL. This can cause kernel/module
> panic if code attempts to clear workqueue that was not initialized.
> 
> This scenario is possible when resuming suspended driver in stmmac_resume(),
> because there is no handling for failed stmmac_hw_setup(),
> which can fail and return if DMA engine has failed to initialize,
> and workqueue is initialized after DMA engine.
> Should DMA engine fail to initialize, resume will proceed normally,
> but interface won't work and TX queue will eventually timeout,
> causing 'Reset adapter' error.
> This then does destroy workqueue during reset process.
> And since workqueue is initialized after DMA engine and can be skipped,
> it will cause kernel/module panic.
> 
> [...]

Here is the summary with links:
  - [net,v2] stmmac: Clear variable when destroying workqueue
    https://git.kernel.org/netdev/net/c/8af411bbba1f

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html