[PATCH net-next v4 00/12] net: dsa: vsc73xx: Implement VLAN operations

[PATCH net-next v4 00/12] net: dsa: vsc73xx: Implement VLAN operations

[Pawel Dembicki]

This patch series is a result of splitting a larger patch series [0],
where some parts was merged before.

The first patch implements port state configuration, which is required
for bridge functionality. STP frames are not forwarded at this moment.
BPDU frames are only forwarded from/to the PI/SI interface.
For more information, see chapter 2.7.1 (CPU Forwarding) in the
datasheet.

Patches 2, 7-9 and 11 provide a basic implementation of tag_8021q
functionality with QinQ support, without VLAN filtering in
the bridge and simple VLAN awareness in VLAN filtering mode.

Patches 3-6 came from Vladimir Oltean. They prepare for making
tag8021q more common. VSC73XX uses very similar tag recognition,
and some code from tag_sja1105 could be moved to tag_8021q for
common use.

Patch 10 is preparation for use tag_8021q bridge functions as generic
implementation of the 'ds->ops->port_bridge_*()'.

Patch 12 is required to avoid problem with learning on standalone ports.

[0] https://patchwork.kernel.org/project/netdevbpf/list/?series=841034&state=%2A&archive=both

Pawel Dembicki (8):
  net: dsa: vsc73xx: add port_stp_state_set function
  net: dsa: vsc73xx: Add vlan filtering
  net: dsa: vsc73xx: introduce tag 8021q for vsc73xx
  net: dsa: vsc73xx: Implement the tag_8021q VLAN operations
  net: dsa: Define max num of bridges in tag8021q implementation
  net: dsa: prepare 'dsa_tag_8021q_bridge_join' for standalone use
  net: dsa: vsc73xx: Add bridge support
  net: dsa: vsc73xx: start treating the BR_LEARNING flag

Vladimir Oltean (4):
  net: dsa: tag_sja1105: absorb logic for not overwriting precise info
    into dsa_8021q_rcv()
  net: dsa: tag_sja1105: absorb entire sja1105_vlan_rcv() into
    dsa_8021q_rcv()
  net: dsa: tag_sja1105: prefer precise source port info on SJA1110 too
  net: dsa: tag_sja1105: refactor skb->dev assignment to
    dsa_tag_8021q_find_user()

 drivers/net/dsa/Kconfig                |   2 +-
 drivers/net/dsa/sja1105/sja1105_main.c |   8 +-
 drivers/net/dsa/vitesse-vsc73xx-core.c | 735 ++++++++++++++++++++++++-
 drivers/net/dsa/vitesse-vsc73xx.h      |  37 ++
 include/linux/dsa/8021q.h              |   8 +-
 include/net/dsa.h                      |   2 +
 net/dsa/Kconfig                        |   6 +
 net/dsa/Makefile                       |   1 +
 net/dsa/tag_8021q.c                    |  84 ++-
 net/dsa/tag_8021q.h                    |   7 +-
 net/dsa/tag_ocelot_8021q.c             |   2 +-
 net/dsa/tag_sja1105.c                  |  72 +--
 net/dsa/tag_vsc73xx_8021q.c            |  68 +++
 13 files changed, 934 insertions(+), 98 deletions(-)
 create mode 100644 net/dsa/tag_vsc73xx_8021q.c

-- 
2.34.1

[PATCH net-next v4 01/12] net: dsa: vsc73xx: add port_stp_state_set function

[Pawel Dembicki]

This isn't a fully functional implementation of 802.1D, but
port_stp_state_set is required for a future tag8021q operations.

This implementation handles properly all states, but vsc73xx doesn't
forward STP packets.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
---
v4-v1:
  - resend only
---
Before patch series split:
https://patchwork.kernel.org/project/netdevbpf/list/?series=841034&state=%2A&archive=both
v7:
  - implement 'vsc73xx_refresh_fwd_map' simplification
v6:
  - fix inconsistent indenting
v5:
  - remove unneeded 'RECVMASK' operations
  - reorganise vsc73xx_refresh_fwd_map function
v4:
  - fully reworked port_stp_state_set
v3:
  - use 'VSC73XX_MAX_NUM_PORTS' define
  - add 'state == BR_STATE_DISABLED' condition
  - fix style issues
v2:
  - fix kdoc
---
 drivers/net/dsa/vitesse-vsc73xx-core.c | 96 +++++++++++++++++++++++---
 1 file changed, 85 insertions(+), 11 deletions(-)

diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c
index 4b031fefcec6..ebeea259f019 100644
--- a/drivers/net/dsa/vitesse-vsc73xx-core.c
+++ b/drivers/net/dsa/vitesse-vsc73xx-core.c
@@ -164,6 +164,10 @@
 #define VSC73XX_AGENCTRL	0xf0
 #define VSC73XX_CAPRST		0xff
 
+#define VSC73XX_SRCMASKS_CPU_COPY		BIT(27)
+#define VSC73XX_SRCMASKS_MIRROR			BIT(26)
+#define VSC73XX_SRCMASKS_PORTS_MASK		GENMASK(7, 0)
+
 #define VSC73XX_MACACCESS_CPU_COPY		BIT(14)
 #define VSC73XX_MACACCESS_FWD_KILL		BIT(13)
 #define VSC73XX_MACACCESS_IGNORE_VLAN		BIT(12)
@@ -623,9 +627,6 @@ static int vsc73xx_setup(struct dsa_switch *ds)
 	vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GMIIDELAY,
 		      VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS |
 		      VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS);
-	/* Enable reception of frames on all ports */
-	vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_RECVMASK,
-		      0x5f);
 	/* IP multicast flood mask (table 144) */
 	vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_IFLODMSK,
 		      0xff);
@@ -788,10 +789,6 @@ static void vsc73xx_mac_link_down(struct phylink_config *config,
 	/* Allow backward dropping of frames from this port */
 	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
 			    VSC73XX_SBACKWDROP, BIT(port), BIT(port));
-
-	/* Receive mask (disable forwarding) */
-	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
-			    VSC73XX_RECVMASK, BIT(port), 0);
 }
 
 static void vsc73xx_mac_link_up(struct phylink_config *config,
@@ -844,10 +841,6 @@ static void vsc73xx_mac_link_up(struct phylink_config *config,
 	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
 			    VSC73XX_ARBDISC, BIT(port), 0);
 
-	/* Enable port (forwarding) in the receive mask */
-	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
-			    VSC73XX_RECVMASK, BIT(port), BIT(port));
-
 	/* Disallow backward dropping of frames from this port */
 	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
 			    VSC73XX_SBACKWDROP, BIT(port), 0);
@@ -1039,6 +1032,86 @@ static void vsc73xx_phylink_get_caps(struct dsa_switch *dsa, int port,
 	config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000;
 }
 
+static void vsc73xx_refresh_fwd_map(struct dsa_switch *ds, int port, u8 state)
+{
+	struct dsa_port *other_dp, *dp = dsa_to_port(ds, port);
+	struct vsc73xx *vsc = ds->priv;
+	u16 mask;
+
+	if (state != BR_STATE_FORWARDING) {
+		/* Ports that aren't in the forwarding state must not
+		 * forward packets anywhere.
+		 */
+		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+				    VSC73XX_SRCMASKS + port,
+				    VSC73XX_SRCMASKS_PORTS_MASK, 0);
+
+		dsa_switch_for_each_available_port(other_dp, ds) {
+			if (other_dp == dp)
+				continue;
+			vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+					    VSC73XX_SRCMASKS + other_dp->index,
+					    BIT(port), 0);
+		}
+
+		return;
+	}
+
+	/* Forwarding ports must forward to the CPU and to other ports
+	 * in the same bridge
+	 */
+	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+			    VSC73XX_SRCMASKS + CPU_PORT, BIT(port), BIT(port));
+
+	mask = BIT(CPU_PORT);
+
+	dsa_switch_for_each_user_port(other_dp, ds) {
+		int other_port = other_dp->index;
+
+		if (port == other_port || !dsa_port_bridge_same(dp, other_dp) ||
+		    other_dp->stp_state != BR_STATE_FORWARDING)
+			continue;
+
+		mask |= BIT(other_port);
+
+		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+				    VSC73XX_SRCMASKS + other_port,
+				    BIT(port), BIT(port));
+	}
+
+	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+			    VSC73XX_SRCMASKS + port,
+			    VSC73XX_SRCMASKS_PORTS_MASK, mask);
+}
+
+/* FIXME: STP frames aren't forwarded at this moment. BPDU frames are
+ * forwarded only from and to PI/SI interface. For more info see chapter
+ * 2.7.1 (CPU Forwarding) in datasheet.
+ * This function is required for tag_8021q operations.
+ */
+static void vsc73xx_port_stp_state_set(struct dsa_switch *ds, int port,
+				       u8 state)
+{
+	struct vsc73xx *vsc = ds->priv;
+	u32 val;
+
+	val = (state == BR_STATE_BLOCKING || state == BR_STATE_DISABLED) ?
+	      0 : BIT(port);
+	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+			    VSC73XX_RECVMASK, BIT(port), val);
+
+	val = (state == BR_STATE_LEARNING || state == BR_STATE_FORWARDING) ?
+	      BIT(port) : 0;
+	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+			    VSC73XX_LEARNMASK, BIT(port), val);
+
+	/* CPU Port should always forward packets when user ports are forwarding
+	 * so let's configure it from other ports only.
+	 */
+	if (port != CPU_PORT)
+		vsc73xx_refresh_fwd_map(ds, port, state);
+}
+
 static const struct phylink_mac_ops vsc73xx_phylink_mac_ops = {
 	.mac_config = vsc73xx_mac_config,
 	.mac_link_down = vsc73xx_mac_link_down,
@@ -1057,6 +1130,7 @@ static const struct dsa_switch_ops vsc73xx_ds_ops = {
 	.port_disable = vsc73xx_port_disable,
 	.port_change_mtu = vsc73xx_change_mtu,
 	.port_max_mtu = vsc73xx_get_max_mtu,
+	.port_stp_state_set = vsc73xx_port_stp_state_set,
 	.phylink_get_caps = vsc73xx_phylink_get_caps,
 };
 
-- 
2.34.1

[PATCH net-next v4 02/12] net: dsa: vsc73xx: Add vlan filtering

[Pawel Dembicki]

This patch implements VLAN filtering for the vsc73xx driver.

After starting VLAN filtering, the switch is reconfigured from QinQ to
a simple VLAN aware mode. This is required because VSC73XX chips do not
support inner VLAN tag filtering.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
---
v4:
  - fix kdoc
v3:
  - added kdoc descriptions of some functions
  - fixed typos
  - modified 'vsc73xx_vlan_commit_untagged' implementation
  - introduce 'vsc73xx_vlan_commit_settings'
  - removed unnescessary 'portinfo' value initialization
  - CPU_PORT is now addded to VLAN map
  - removed 'untagged_tag_8021q' from 'portinfo'
  - removed unnescessary 'port_setup' implementation
v2:
  - removed not needed INIT_LIST_HEAD
  - fix vsc73xx_vlan removing procedure
  - fix code spell
  - handle return codes from 'vsc73xx_vlan_commit*' functions
  - move 'vsc73xx_vlan_commit*' call from port_setup to port_enable to
    avoid unused port configuration
v1:
  - refactored pvid, untagged and vlan filter configuration
  - fix typo
  - simplification
---
Before patch series split:
https://patchwork.kernel.org/project/netdevbpf/list/?series=841034&state=%2A&archive=both
v8:
  - set init value of 'ret' in 'vsc73xx_port_vlan_add'
v7:
  - rework pvid and untagged configuration routines
  - introduce portinfo structure which should make pvid/untagged
    procedures simpler
  - introduce 'vsc73xx_vlan_summary' structure
  - replace tagged/untagged count functions with 'vsc73xx_bridge_vlan_summary'
  - fix VSC73XX_VLANMASK configuration. It was copy from existing code.
  - stop configuring pvid/untagged registers whed pvid/untagged is
    disabled
v6:
  - resend only
v5:
  - fix possible leak in 'vsc73xx_port_vlan_add'
  - use proper variable in statement from 'vsc73xx_port_vlan_filtering'
  - change 'vlan_no' name to 'vid'
  - codding style improvements
  - comment improvements
  - handle return of 'vsc73xx_update_bits'
  - reduce I/O operations
  - use 'size_t' for counting variables
v4:
  - reworked most of conditional register configs
  - simplified port_vlan function
  - move vlan table clearing from port_setup to setup
  - pvid configuration simplified (now kernel take care about no of
    pvids per port)
  - port vlans are stored in list now
  - introduce implementation of all untagged vlans state
  - many minor changes
v3:
  - reworked all vlan commits
  - added storage variables for pvid and untagged vlans
  - move length extender settings to port setup
  - remove vlan table cleaning in wrong places
v2:
  - no changes done
---
 drivers/net/dsa/vitesse-vsc73xx-core.c | 532 ++++++++++++++++++++++++-
 drivers/net/dsa/vitesse-vsc73xx.h      |  37 ++
 2 files changed, 566 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c
index ebeea259f019..906bbae22861 100644
--- a/drivers/net/dsa/vitesse-vsc73xx-core.c
+++ b/drivers/net/dsa/vitesse-vsc73xx-core.c
@@ -22,9 +22,11 @@
 #include <linux/of_mdio.h>
 #include <linux/bitops.h>
 #include <linux/if_bridge.h>
+#include <linux/if_vlan.h>
 #include <linux/etherdevice.h>
 #include <linux/gpio/consumer.h>
 #include <linux/gpio/driver.h>
+#include <linux/dsa/8021q.h>
 #include <linux/random.h>
 #include <net/dsa.h>
 
@@ -62,6 +64,8 @@
 #define VSC73XX_CAT_DROP	0x6e
 #define VSC73XX_CAT_PR_MISC_L2	0x6f
 #define VSC73XX_CAT_PR_USR_PRIO	0x75
+#define VSC73XX_CAT_VLAN_MISC	0x79
+#define VSC73XX_CAT_PORT_VLAN	0x7a
 #define VSC73XX_Q_MISC_CONF	0xdf
 
 /* MAC_CFG register bits */
@@ -122,6 +126,17 @@
 #define VSC73XX_ADVPORTM_IO_LOOPBACK	BIT(1)
 #define VSC73XX_ADVPORTM_HOST_LOOPBACK	BIT(0)
 
+/*  TXUPDCFG transmit modify setup bits */
+#define VSC73XX_TXUPDCFG_DSCP_REWR_MODE	GENMASK(20, 19)
+#define VSC73XX_TXUPDCFG_DSCP_REWR_ENA	BIT(18)
+#define VSC73XX_TXUPDCFG_TX_INT_TO_USRPRIO_ENA	BIT(17)
+#define VSC73XX_TXUPDCFG_TX_UNTAGGED_VID	GENMASK(15, 4)
+#define VSC73XX_TXUPDCFG_TX_UNTAGGED_VID_ENA	BIT(3)
+#define VSC73XX_TXUPDCFG_TX_UPDATE_CRC_CPU_ENA	BIT(1)
+#define VSC73XX_TXUPDCFG_TX_INSERT_TAG	BIT(0)
+
+#define VSC73XX_TXUPDCFG_TX_UNTAGGED_VID_SHIFT	4
+
 /* CAT_DROP categorizer frame dropping register bits */
 #define VSC73XX_CAT_DROP_DROP_MC_SMAC_ENA	BIT(6)
 #define VSC73XX_CAT_DROP_FWD_CTRL_ENA		BIT(4)
@@ -135,6 +150,15 @@
 #define VSC73XX_Q_MISC_CONF_EARLY_TX_512	(1 << 1)
 #define VSC73XX_Q_MISC_CONF_MAC_PAUSE_MODE	BIT(0)
 
+/* CAT_VLAN_MISC categorizer VLAN miscellaneous bits */
+#define VSC73XX_CAT_VLAN_MISC_VLAN_TCI_IGNORE_ENA BIT(8)
+#define VSC73XX_CAT_VLAN_MISC_VLAN_KEEP_TAG_ENA BIT(7)
+
+/* CAT_PORT_VLAN categorizer port VLAN */
+#define VSC73XX_CAT_PORT_VLAN_VLAN_CFI BIT(15)
+#define VSC73XX_CAT_PORT_VLAN_VLAN_USR_PRIO GENMASK(14, 12)
+#define VSC73XX_CAT_PORT_VLAN_VLAN_VID GENMASK(11, 0)
+
 /* Frame analyzer block 2 registers */
 #define VSC73XX_STORMLIMIT	0x02
 #define VSC73XX_ADVLEARN	0x03
@@ -189,7 +213,8 @@
 #define VSC73XX_VLANACCESS_VLAN_MIRROR		BIT(29)
 #define VSC73XX_VLANACCESS_VLAN_SRC_CHECK	BIT(28)
 #define VSC73XX_VLANACCESS_VLAN_PORT_MASK	GENMASK(9, 2)
-#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_MASK	GENMASK(2, 0)
+#define VSC73XX_VLANACCESS_VLAN_PORT_MASK_SHIFT	2
+#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_MASK	GENMASK(1, 0)
 #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_IDLE	0
 #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_READ_ENTRY	1
 #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_WRITE_ENTRY	2
@@ -347,6 +372,17 @@ static const struct vsc73xx_counter vsc73xx_tx_counters[] = {
 	{ 29, "TxQoSClass3" }, /* non-standard counter */
 };
 
+struct vsc73xx_vlan_summary {
+	size_t num_tagged;
+	size_t num_untagged;
+};
+
+enum vsc73xx_port_vlan_conf {
+	VSC73XX_VLAN_FILTER,
+	VSC73XX_VLAN_FILTER_UNTAG_ALL,
+	VSC73XX_VLAN_IGNORE,
+};
+
 int vsc73xx_is_addr_valid(u8 block, u8 subblock)
 {
 	switch (block) {
@@ -564,6 +600,90 @@ static enum dsa_tag_protocol vsc73xx_get_tag_protocol(struct dsa_switch *ds,
 	return DSA_TAG_PROTO_NONE;
 }
 
+static int vsc73xx_wait_for_vlan_table_cmd(struct vsc73xx *vsc)
+{
+	int ret, err;
+	u32 val;
+
+	ret = read_poll_timeout(vsc73xx_read, err,
+				err < 0 ||
+				((val & VSC73XX_VLANACCESS_VLAN_TBL_CMD_MASK) ==
+				VSC73XX_VLANACCESS_VLAN_TBL_CMD_IDLE),
+				VSC73XX_POLL_SLEEP_US, VSC73XX_POLL_TIMEOUT_US,
+				false, vsc, VSC73XX_BLOCK_ANALYZER,
+				0, VSC73XX_VLANACCESS, &val);
+	if (ret)
+		return ret;
+	return err;
+}
+
+static int
+vsc73xx_read_vlan_table_entry(struct vsc73xx *vsc, u16 vid, u8 *portmap)
+{
+	u32 val;
+	int ret;
+
+	vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_VLANTIDX, vid);
+
+	ret = vsc73xx_wait_for_vlan_table_cmd(vsc);
+	if (ret)
+		return ret;
+
+	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_VLANACCESS,
+			    VSC73XX_VLANACCESS_VLAN_TBL_CMD_MASK,
+			    VSC73XX_VLANACCESS_VLAN_TBL_CMD_READ_ENTRY);
+
+	ret = vsc73xx_wait_for_vlan_table_cmd(vsc);
+	if (ret)
+		return ret;
+
+	vsc73xx_read(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_VLANACCESS, &val);
+	*portmap = (val & VSC73XX_VLANACCESS_VLAN_PORT_MASK) >>
+		   VSC73XX_VLANACCESS_VLAN_PORT_MASK_SHIFT;
+
+	return 0;
+}
+
+static int
+vsc73xx_write_vlan_table_entry(struct vsc73xx *vsc, u16 vid, u8 portmap)
+{
+	int ret;
+
+	vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_VLANTIDX, vid);
+
+	ret = vsc73xx_wait_for_vlan_table_cmd(vsc);
+	if (ret)
+		return ret;
+
+	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_VLANACCESS,
+			    VSC73XX_VLANACCESS_VLAN_TBL_CMD_MASK |
+			    VSC73XX_VLANACCESS_VLAN_SRC_CHECK |
+			    VSC73XX_VLANACCESS_VLAN_PORT_MASK,
+			    VSC73XX_VLANACCESS_VLAN_TBL_CMD_WRITE_ENTRY |
+			    VSC73XX_VLANACCESS_VLAN_SRC_CHECK |
+			    (portmap << VSC73XX_VLANACCESS_VLAN_PORT_MASK_SHIFT));
+
+	return vsc73xx_wait_for_vlan_table_cmd(vsc);
+}
+
+static int
+vsc73xx_update_vlan_table(struct vsc73xx *vsc, int port, u16 vid, bool set)
+{
+	u8 portmap;
+	int ret;
+
+	ret = vsc73xx_read_vlan_table_entry(vsc, vid, &portmap);
+	if (ret)
+		return ret;
+
+	if (set)
+		portmap |= BIT(port);
+	else
+		portmap &= ~BIT(port);
+
+	return vsc73xx_write_vlan_table_entry(vsc, vid, portmap);
+}
+
 static int vsc73xx_setup(struct dsa_switch *ds)
 {
 	struct vsc73xx *vsc = ds->priv;
@@ -598,7 +718,7 @@ static int vsc73xx_setup(struct dsa_switch *ds)
 		      VSC73XX_MACACCESS,
 		      VSC73XX_MACACCESS_CMD_CLEAR_TABLE);
 
-	/* Clear VLAN table */
+	/* Set VLAN table to default values */
 	vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0,
 		      VSC73XX_VLANACCESS,
 		      VSC73XX_VLANACCESS_VLAN_TBL_CMD_CLEAR_TABLE);
@@ -627,6 +747,9 @@ static int vsc73xx_setup(struct dsa_switch *ds)
 	vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GMIIDELAY,
 		      VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS |
 		      VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS);
+	/* Ingess VLAN reception mask (table 145) */
+	vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_VLANMASK,
+		      0xff);
 	/* IP multicast flood mask (table 144) */
 	vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_IFLODMSK,
 		      0xff);
@@ -639,6 +762,12 @@ static int vsc73xx_setup(struct dsa_switch *ds)
 
 	udelay(4);
 
+	/* Clear VLAN table */
+	for (i = 0; i < VLAN_N_VID; i++)
+		vsc73xx_write_vlan_table_entry(vsc, i, 0);
+
+	INIT_LIST_HEAD(&vsc->vlans);
+
 	return 0;
 }
 
@@ -825,6 +954,12 @@ static void vsc73xx_mac_link_up(struct phylink_config *config,
 	val |= seed << VSC73XX_MAC_CFG_SEED_OFFSET;
 	val |= VSC73XX_MAC_CFG_SEED_LOAD;
 	val |= VSC73XX_MAC_CFG_WEXC_DIS;
+
+	/* Those bits are responsible for MTU only. Kernel takes care about MTU,
+	 * let's enable +8 bytes frame length unconditionally.
+	 */
+	val |= VSC73XX_MAC_CFG_VLAN_AWR | VSC73XX_MAC_CFG_VLAN_DBLAWR;
+
 	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val);
 
 	/* Flow control for the PHY facing ports:
@@ -853,6 +988,257 @@ static void vsc73xx_mac_link_up(struct phylink_config *config,
 			    VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN);
 }
 
+static bool vsc73xx_tag_8021q_active(struct dsa_port *dp)
+{
+	return !dsa_port_is_vlan_filtering(dp);
+}
+
+static struct vsc73xx_bridge_vlan *
+vsc73xx_bridge_vlan_find(struct vsc73xx *vsc, u16 vid)
+{
+	struct vsc73xx_bridge_vlan *vlan;
+
+	list_for_each_entry(vlan, &vsc->vlans, list)
+		if (vlan->vid == vid)
+			return vlan;
+
+	return NULL;
+}
+
+static void
+vsc73xx_bridge_vlan_remove_port(struct vsc73xx_bridge_vlan *vsc73xx_vlan,
+				int port)
+{
+	vsc73xx_vlan->portmask &= ~BIT(port);
+
+	if (vsc73xx_vlan->portmask)
+		return;
+
+	list_del(&vsc73xx_vlan->list);
+	kfree(vsc73xx_vlan);
+}
+
+static void vsc73xx_bridge_vlan_summary(struct vsc73xx *vsc, int port,
+					struct vsc73xx_vlan_summary *summary,
+					u16 ignored_vid)
+{
+	size_t num_tagged = 0, num_untagged = 0;
+	struct vsc73xx_bridge_vlan *vlan;
+
+	list_for_each_entry(vlan, &vsc->vlans, list) {
+		if (!(vlan->portmask & BIT(port)) || vlan->vid == ignored_vid)
+			continue;
+
+		if (vlan->untagged & BIT(port))
+			num_untagged++;
+		else
+			num_tagged++;
+	}
+
+	summary->num_untagged = num_untagged;
+	summary->num_tagged = num_tagged;
+}
+
+static u16 vsc73xx_find_first_vlan_untagged(struct vsc73xx *vsc, int port)
+{
+	struct vsc73xx_bridge_vlan *vlan;
+
+	list_for_each_entry(vlan, &vsc->vlans, list)
+		if ((vlan->portmask & BIT(port)) &&
+		    (vlan->untagged & BIT(port)))
+			return vlan->vid;
+
+	return VLAN_N_VID;
+}
+
+static int vsc73xx_set_vlan_conf(struct vsc73xx *vsc, int port,
+				 enum vsc73xx_port_vlan_conf port_vlan_conf)
+{
+	u32 val = 0;
+	int ret;
+
+	if (port_vlan_conf == VSC73XX_VLAN_IGNORE)
+		val = VSC73XX_CAT_VLAN_MISC_VLAN_TCI_IGNORE_ENA |
+		      VSC73XX_CAT_VLAN_MISC_VLAN_KEEP_TAG_ENA;
+
+	ret = vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
+				  VSC73XX_CAT_VLAN_MISC,
+				  VSC73XX_CAT_VLAN_MISC_VLAN_TCI_IGNORE_ENA |
+				  VSC73XX_CAT_VLAN_MISC_VLAN_KEEP_TAG_ENA, val);
+	if (ret)
+		return ret;
+
+	val = (port_vlan_conf == VSC73XX_VLAN_FILTER) ?
+	      VSC73XX_TXUPDCFG_TX_INSERT_TAG : 0;
+
+	return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
+				   VSC73XX_TXUPDCFG,
+				   VSC73XX_TXUPDCFG_TX_INSERT_TAG, val);
+}
+
+/**
+ * vsc73xx_vlan_commit_conf - Update VLAN configuration of a port
+ * @vsc: Switch private data structure
+ * @port: Port index on which to operate
+ *
+ * Update the VLAN behavior of a port to make sure that when it is under
+ * a VLAN filtering bridge, the port is either filtering with tag
+ * preservation, or filtering with all VLANs egress-untagged. Otherwise,
+ * the port ignores VLAN tags from packets and applies the port-based
+ * VID.
+ *
+ * Must be called when changes are made to:
+ * - the bridge VLAN filtering state of the port
+ * - the number or attributes of VLANs from the bridge VLAN table,
+ *   while the port is currently VLAN-aware
+ *
+ * Return: 0 on success, or negative errno on error.
+ */
+static int vsc73xx_vlan_commit_conf(struct vsc73xx *vsc, int port)
+{
+	enum vsc73xx_port_vlan_conf port_vlan_conf = VSC73XX_VLAN_IGNORE;
+	struct dsa_port *dp = dsa_to_port(vsc->ds, port);
+
+	if (port == CPU_PORT) {
+		port_vlan_conf = VSC73XX_VLAN_FILTER;
+	} else if (dsa_port_is_vlan_filtering(dp)) {
+		struct vsc73xx_vlan_summary summary;
+
+		port_vlan_conf = VSC73XX_VLAN_FILTER;
+
+		vsc73xx_bridge_vlan_summary(vsc, port, &summary, VLAN_N_VID);
+		if (summary.num_tagged == 0)
+			port_vlan_conf = VSC73XX_VLAN_FILTER_UNTAG_ALL;
+	}
+
+	return vsc73xx_set_vlan_conf(vsc, port, port_vlan_conf);
+}
+
+static int
+vsc73xx_vlan_change_untagged(struct vsc73xx *vsc, int port, u16 vid, bool set)
+{
+	u32 val = 0;
+
+	if (set)
+		val = VSC73XX_TXUPDCFG_TX_UNTAGGED_VID_ENA |
+		      ((vid << VSC73XX_TXUPDCFG_TX_UNTAGGED_VID_SHIFT) &
+		       VSC73XX_TXUPDCFG_TX_UNTAGGED_VID);
+
+	return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
+				   VSC73XX_TXUPDCFG,
+				   VSC73XX_TXUPDCFG_TX_UNTAGGED_VID_ENA |
+				   VSC73XX_TXUPDCFG_TX_UNTAGGED_VID, val);
+}
+
+/**
+ * vsc73xx_vlan_commit_untagged - Update native VLAN of a port
+ * @vsc: Switch private data structure
+ * @port: Port index on which to operate
+ *
+ * Update the native VLAN of a port (the one VLAN which is transmitted
+ * as egress-tagged on a trunk port) when port is in VLAN filtering mode and
+ * only one untagged vid is configured.
+ * In other cases no need to configure it because switch can untag all vlans on
+ * the port.
+ *
+ * Return: 0 on success, or negative errno on error.
+ */
+static int vsc73xx_vlan_commit_untagged(struct vsc73xx *vsc, int port)
+{
+	struct dsa_port *dp = dsa_to_port(vsc->ds, port);
+	struct vsc73xx_vlan_summary summary;
+	u16 vid = 0;
+	bool valid;
+
+	if (!dsa_port_is_vlan_filtering(dp))
+		/* Port is configured to untag all vlans in that case.
+		 * No need to commit untagged config change.
+		 */
+		return 0;
+
+	vsc73xx_bridge_vlan_summary(vsc, port, &summary, VLAN_N_VID);
+
+	if (summary.num_untagged > 1)
+		/* Port must untag all vlans in that case.
+		 * No need to commit untagged config change.
+		 */
+		return 0;
+
+	valid = (summary.num_untagged == 1);
+	if (valid)
+		vid = vsc73xx_find_first_vlan_untagged(vsc, port);
+
+	return vsc73xx_vlan_change_untagged(vsc, port, vid, valid);
+}
+
+static int
+vsc73xx_vlan_change_pvid(struct vsc73xx *vsc, int port, u16 vid, bool set)
+{
+	u32 val = 0;
+	int ret;
+
+	val = set ? 0 : VSC73XX_CAT_DROP_UNTAGGED_ENA;
+
+	ret = vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
+				  VSC73XX_CAT_DROP,
+				  VSC73XX_CAT_DROP_UNTAGGED_ENA, val);
+	if (!set || ret)
+		return ret;
+
+	return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
+				   VSC73XX_CAT_PORT_VLAN,
+				   VSC73XX_CAT_PORT_VLAN_VLAN_VID,
+				   vid & VSC73XX_CAT_PORT_VLAN_VLAN_VID);
+}
+
+/**
+ * vsc73xx_vlan_commit_pvid - Update port-based default VLAN of a port
+ * @vsc: Switch private data structure
+ * @port: Port index on which to operate
+ *
+ * Update the PVID of a port so that it follows either the bridge PVID
+ * configuration, when the bridge is currently VLAN-aware, or the PVID
+ * from tag_8021q, when the port is standalone or under a VLAN-unaware
+ * bridge. A port with no PVID drops all untagged and VID 0 tagged
+ * traffic.
+ *
+ * Must be called when changes are made to:
+ * - the bridge VLAN filtering state of the port
+ * - the number or attributes of VLANs from the bridge VLAN table,
+ *   while the port is currently VLAN-aware
+ *
+ * Return: 0 on success, or negative errno on error.
+ */
+static int vsc73xx_vlan_commit_pvid(struct vsc73xx *vsc, int port)
+{
+	struct vsc73xx_portinfo *portinfo = &vsc->portinfo[port];
+	bool valid = portinfo->pvid_tag_8021q_configured;
+	struct dsa_port *dp = dsa_to_port(vsc->ds, port);
+	u16 vid = portinfo->pvid_tag_8021q;
+
+	if (dsa_port_is_vlan_filtering(dp)) {
+		vid = portinfo->pvid_vlan_filtering;
+		valid = portinfo->pvid_vlan_filtering_configured;
+	}
+
+	return vsc73xx_vlan_change_pvid(vsc, port, vid, valid);
+}
+
+static int vsc73xx_vlan_commit_settings(struct vsc73xx *vsc, int port)
+{
+	int ret;
+
+	ret = vsc73xx_vlan_commit_untagged(vsc, port);
+	if (ret)
+		return ret;
+
+	ret = vsc73xx_vlan_commit_pvid(vsc, port);
+	if (ret)
+		return ret;
+
+	return vsc73xx_vlan_commit_conf(vsc, port);
+}
+
 static int vsc73xx_port_enable(struct dsa_switch *ds, int port,
 			       struct phy_device *phy)
 {
@@ -861,7 +1247,7 @@ static int vsc73xx_port_enable(struct dsa_switch *ds, int port,
 	dev_info(vsc->dev, "enable port %d\n", port);
 	vsc73xx_init_port(vsc, port);
 
-	return 0;
+	return vsc73xx_vlan_commit_settings(vsc, port);
 }
 
 static void vsc73xx_port_disable(struct dsa_switch *ds, int port)
@@ -1032,6 +1418,143 @@ static void vsc73xx_phylink_get_caps(struct dsa_switch *dsa, int port,
 	config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000;
 }
 
+static int
+vsc73xx_port_vlan_filtering(struct dsa_switch *ds, int port,
+			    bool vlan_filtering, struct netlink_ext_ack *extack)
+{
+	struct vsc73xx *vsc = ds->priv;
+
+	/* The commit to hardware processed below is required because vsc73xx
+	 * is using tag_8021q. When vlan_filtering is disabled, tag_8021q uses
+	 * pvid/untagged vlans for port recognition. The values configured for
+	 * vlans and pvid/untagged states are stored in portinfo structure.
+	 * When vlan_filtering is enabled, we need to restore pvid/untagged from
+	 * portinfo structure. Analogous routine is processed when
+	 * vlan_filtering is disabled, but values used for tag_8021q are
+	 * restored.
+	 */
+
+	return vsc73xx_vlan_commit_settings(vsc, port);
+}
+
+static int vsc73xx_port_vlan_add(struct dsa_switch *ds, int port,
+				 const struct switchdev_obj_port_vlan *vlan,
+				 struct netlink_ext_ack *extack)
+{
+	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+	bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
+	struct dsa_port *dp = dsa_to_port(ds, port);
+	struct vsc73xx_bridge_vlan *vsc73xx_vlan;
+	struct vsc73xx_vlan_summary summary;
+	struct vsc73xx_portinfo *portinfo;
+	struct vsc73xx *vsc = ds->priv;
+	bool commit_to_hardware;
+	int ret = 0;
+
+	/* Be sure to deny alterations to the configuration done by tag_8021q.
+	 */
+	if (vid_is_dsa_8021q(vlan->vid)) {
+		NL_SET_ERR_MSG_MOD(extack,
+				   "Range 3072-4095 reserved for dsa_8021q operation");
+		return -EBUSY;
+	}
+
+	/* The processed vlan->vid is excluded from the search because the VLAN
+	 * can be re-added with a different set of flags, so it's easiest to
+	 * ignore its old flags from the VLAN database software copy.
+	 */
+	vsc73xx_bridge_vlan_summary(vsc, port, &summary, vlan->vid);
+
+	/* VSC73XX allows only three untagged states: none, one or all */
+	if ((untagged && summary.num_tagged > 0 && summary.num_untagged > 0) ||
+	    (!untagged && summary.num_untagged > 1)) {
+		NL_SET_ERR_MSG_MOD(extack,
+				   "Port can have only none, one or all untagged vlan");
+		return -EBUSY;
+	}
+
+	vsc73xx_vlan = vsc73xx_bridge_vlan_find(vsc, vlan->vid);
+
+	if (!vsc73xx_vlan) {
+		vsc73xx_vlan = kzalloc(sizeof(*vsc73xx_vlan), GFP_KERNEL);
+		if (!vsc73xx_vlan)
+			return -ENOMEM;
+
+		vsc73xx_vlan->vid = vlan->vid;
+
+		list_add_tail(&vsc73xx_vlan->list, &vsc->vlans);
+	}
+
+	vsc73xx_vlan->portmask |= BIT(port);
+
+	/* CPU port must be always tagged because source port identification is
+	 * based on tag_8021q.
+	 */
+	if (port == CPU_PORT)
+		goto update_vlan_table;
+
+	if (untagged)
+		vsc73xx_vlan->untagged |= BIT(port);
+	else
+		vsc73xx_vlan->untagged &= ~BIT(port);
+
+	portinfo = &vsc->portinfo[port];
+
+	if (pvid) {
+		portinfo->pvid_vlan_filtering_configured = true;
+		portinfo->pvid_vlan_filtering = vlan->vid;
+	} else if (portinfo->pvid_vlan_filtering_configured &&
+		   portinfo->pvid_vlan_filtering == vlan->vid) {
+		portinfo->pvid_vlan_filtering_configured = false;
+	}
+
+	commit_to_hardware = !vsc73xx_tag_8021q_active(dp);
+	if (commit_to_hardware) {
+		ret = vsc73xx_vlan_commit_settings(vsc, port);
+		if (ret)
+			goto err;
+	}
+
+update_vlan_table:
+	ret = vsc73xx_update_vlan_table(vsc, port, vlan->vid, true);
+	if (!ret)
+		return 0;
+err:
+	vsc73xx_bridge_vlan_remove_port(vsc73xx_vlan, port);
+	return ret;
+}
+
+static int vsc73xx_port_vlan_del(struct dsa_switch *ds, int port,
+				 const struct switchdev_obj_port_vlan *vlan)
+{
+	struct vsc73xx_bridge_vlan *vsc73xx_vlan;
+	struct vsc73xx_portinfo *portinfo;
+	struct vsc73xx *vsc = ds->priv;
+	bool commit_to_hardware;
+	int ret;
+
+	ret = vsc73xx_update_vlan_table(vsc, port, vlan->vid, false);
+	if (ret)
+		return ret;
+
+	portinfo = &vsc->portinfo[port];
+
+	if (portinfo->pvid_vlan_filtering_configured &&
+	    portinfo->pvid_vlan_filtering == vlan->vid)
+		portinfo->pvid_vlan_filtering_configured = false;
+
+	vsc73xx_vlan = vsc73xx_bridge_vlan_find(vsc, vlan->vid);
+
+	if (vsc73xx_vlan)
+		vsc73xx_bridge_vlan_remove_port(vsc73xx_vlan, port);
+
+	commit_to_hardware = !vsc73xx_tag_8021q_active(dsa_to_port(ds, port));
+	if (commit_to_hardware)
+		return vsc73xx_vlan_commit_settings(vsc, port);
+
+	return 0;
+}
+
 static void vsc73xx_refresh_fwd_map(struct dsa_switch *ds, int port, u8 state)
 {
 	struct dsa_port *other_dp, *dp = dsa_to_port(ds, port);
@@ -1131,6 +1654,9 @@ static const struct dsa_switch_ops vsc73xx_ds_ops = {
 	.port_change_mtu = vsc73xx_change_mtu,
 	.port_max_mtu = vsc73xx_get_max_mtu,
 	.port_stp_state_set = vsc73xx_port_stp_state_set,
+	.port_vlan_filtering = vsc73xx_port_vlan_filtering,
+	.port_vlan_add = vsc73xx_port_vlan_add,
+	.port_vlan_del = vsc73xx_port_vlan_del,
 	.phylink_get_caps = vsc73xx_phylink_get_caps,
 };
 
diff --git a/drivers/net/dsa/vitesse-vsc73xx.h b/drivers/net/dsa/vitesse-vsc73xx.h
index 2997f7e108b1..3ca579acc798 100644
--- a/drivers/net/dsa/vitesse-vsc73xx.h
+++ b/drivers/net/dsa/vitesse-vsc73xx.h
@@ -14,6 +14,22 @@
  */
 #define VSC73XX_MAX_NUM_PORTS	8
 
+/**
+ * struct vsc73xx_portinfo - port data structure: contains storage data
+ * @pvid_vlan_filtering: pvid vlan number used in vlan filtering mode
+ * @pvid_tag_8021q: pvid vlan number used in tag_8021q mode
+ * @pvid_vlan_filtering_configured: informs if port has configured pvid in vlan
+ *	filtering mode
+ * @pvid_tag_8021q_configured: imforms if port have configured pvid in tag_8021q
+ *	mode
+ */
+struct vsc73xx_portinfo {
+	u16		pvid_vlan_filtering;
+	u16		pvid_tag_8021q;
+	bool		pvid_vlan_filtering_configured;
+	bool		pvid_tag_8021q_configured;
+};
+
 /**
  * struct vsc73xx - VSC73xx state container: main data structure
  * @dev: The device pointer
@@ -25,6 +41,10 @@
  * @addr: MAC address used in flow control frames
  * @ops: Structure with hardware-dependent operations
  * @priv: Pointer to the configuration interface structure
+ * @portinfo: Storage table portinfo structructures
+ * @vlans: List of configured vlans. Contains port mask and untagged status of
+ *	every vlan configured in port vlan operation. It doesn't cover tag_8021q
+ *	vlans.
  */
 struct vsc73xx {
 	struct device			*dev;
@@ -35,6 +55,8 @@ struct vsc73xx {
 	u8				addr[ETH_ALEN];
 	const struct vsc73xx_ops	*ops;
 	void				*priv;
+	struct vsc73xx_portinfo		portinfo[VSC73XX_MAX_NUM_PORTS];
+	struct list_head		vlans;
 };
 
 /**
@@ -49,6 +71,21 @@ struct vsc73xx_ops {
 		     u32 val);
 };
 
+/**
+ * struct vsc73xx_bridge_vlan - VSC73xx driver structure which keeps vlan
+ *	database copy
+ * @vid: VLAN number
+ * @portmask: each bit represents one port
+ * @untagged: each bit represents one port configured with @vid untagged
+ * @list: list structure
+ */
+struct vsc73xx_bridge_vlan {
+	u16 vid;
+	u8 portmask;
+	u8 untagged;
+	struct list_head list;
+};
+
 int vsc73xx_is_addr_valid(u8 block, u8 subblock);
 int vsc73xx_probe(struct vsc73xx *vsc);
 void vsc73xx_remove(struct vsc73xx *vsc);
-- 
2.34.1

[PATCH net-next v4 03/12] net: dsa: tag_sja1105: absorb logic for not overwriting precise info into dsa_8021q_rcv()

[Pawel Dembicki]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

In both sja1105_rcv() and sja1110_rcv(), we may have precise source port
information coming from parallel hardware mechanisms, in addition to the
tag_8021q header.

Only sja1105_rcv() has extra logic to not overwrite that precise info
with what's present in the VLAN tag. This is because sja1110_rcv() gets
by, by having a reversed set of checks when assigning skb->dev. When the
source port is imprecise (vbid >=1), source_port and switch_id will be
set to zeroes by dsa_8021q_rcv(), which might be problematic. But by
checking for vbid >= 1 first, sja1110_rcv() fends that off.

We would like to make more code common between sja1105_rcv() and
sja1110_rcv(), and for that, we need to make sure that sja1110_rcv()
also goes through the precise source port preservation logic.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
---
v4:
  - resend only
v3:
  - added 'Reviewed-by' and 'Tested-by' only
v2,v1:
  - resend only
---
Before patch series split:
https://patchwork.kernel.org/project/netdevbpf/list/?series=841034&state=%2A&archive=both
v8, v7, v6:
  - resend only
v5:
  - add missing SoB
v4:
  - introduced patch
---
 net/dsa/tag_8021q.c   | 32 +++++++++++++++++++++++++++++---
 net/dsa/tag_sja1105.c | 23 +++--------------------
 2 files changed, 32 insertions(+), 23 deletions(-)

diff --git a/net/dsa/tag_8021q.c b/net/dsa/tag_8021q.c
index 71b26ae6db39..3cb0293793a5 100644
--- a/net/dsa/tag_8021q.c
+++ b/net/dsa/tag_8021q.c
@@ -497,9 +497,21 @@ struct net_device *dsa_tag_8021q_find_port_by_vbid(struct net_device *conduit,
 }
 EXPORT_SYMBOL_GPL(dsa_tag_8021q_find_port_by_vbid);
 
+/**
+ * dsa_8021q_rcv - Decode source information from tag_8021q header
+ * @skb: RX socket buffer
+ * @source_port: pointer to storage for precise source port information.
+ *	If this is known already from outside tag_8021q, the pre-initialized
+ *	value is preserved. If not known, pass -1.
+ * @switch_id: similar to source_port.
+ * @vbid: pointer to storage for imprecise bridge ID. Must be pre-initialized
+ *	with -1. If a positive value is returned, the source_port and switch_id
+ *	are invalid.
+ */
 void dsa_8021q_rcv(struct sk_buff *skb, int *source_port, int *switch_id,
 		   int *vbid)
 {
+	int tmp_source_port, tmp_switch_id, tmp_vbid;
 	u16 vid, tci;
 
 	if (skb_vlan_tag_present(skb)) {
@@ -513,11 +525,25 @@ void dsa_8021q_rcv(struct sk_buff *skb, int *source_port, int *switch_id,
 
 	vid = tci & VLAN_VID_MASK;
 
-	*source_port = dsa_8021q_rx_source_port(vid);
-	*switch_id = dsa_8021q_rx_switch_id(vid);
+	tmp_source_port = dsa_8021q_rx_source_port(vid);
+	tmp_switch_id = dsa_8021q_rx_switch_id(vid);
+	tmp_vbid = dsa_tag_8021q_rx_vbid(vid);
+
+	/* Precise source port information is unknown when receiving from a
+	 * VLAN-unaware bridging domain, and tmp_source_port and tmp_switch_id
+	 * are zeroes in this case.
+	 *
+	 * Preserve the source information from hardware-specific mechanisms,
+	 * if available. This allows us to not overwrite a valid source port
+	 * and switch ID with less precise values.
+	 */
+	if (tmp_vbid == 0 && *source_port == -1)
+		*source_port = tmp_source_port;
+	if (tmp_vbid == 0 && *switch_id == -1)
+		*switch_id = tmp_switch_id;
 
 	if (vbid)
-		*vbid = dsa_tag_8021q_rx_vbid(vid);
+		*vbid = tmp_vbid;
 
 	skb->priority = (tci & VLAN_PRIO_MASK) >> VLAN_PRIO_SHIFT;
 }
diff --git a/net/dsa/tag_sja1105.c b/net/dsa/tag_sja1105.c
index 1aba1d05c27a..48886d4b7e3e 100644
--- a/net/dsa/tag_sja1105.c
+++ b/net/dsa/tag_sja1105.c
@@ -524,30 +524,13 @@ static struct sk_buff *sja1105_rcv(struct sk_buff *skb,
 	/* Normal data plane traffic and link-local frames are tagged with
 	 * a tag_8021q VLAN which we have to strip
 	 */
-	if (sja1105_skb_has_tag_8021q(skb)) {
-		int tmp_source_port = -1, tmp_switch_id = -1;
-
-		sja1105_vlan_rcv(skb, &tmp_source_port, &tmp_switch_id, &vbid,
-				 &vid);
-		/* Preserve the source information from the INCL_SRCPT option,
-		 * if available. This allows us to not overwrite a valid source
-		 * port and switch ID with zeroes when receiving link-local
-		 * frames from a VLAN-unaware bridged port (non-zero vbid) or a
-		 * VLAN-aware bridged port (non-zero vid). Furthermore, the
-		 * tag_8021q source port information is only of trust when the
-		 * vbid is 0 (precise port). Otherwise, tmp_source_port and
-		 * tmp_switch_id will be zeroes.
-		 */
-		if (vbid == 0 && source_port == -1)
-			source_port = tmp_source_port;
-		if (vbid == 0 && switch_id == -1)
-			switch_id = tmp_switch_id;
-	} else if (source_port == -1 && switch_id == -1) {
+	if (sja1105_skb_has_tag_8021q(skb))
+		sja1105_vlan_rcv(skb, &source_port, &switch_id, &vbid, &vid);
+	else if (source_port == -1 && switch_id == -1)
 		/* Packets with no source information have no chance of
 		 * getting accepted, drop them straight away.
 		 */
 		return NULL;
-	}
 
 	if (source_port != -1 && switch_id != -1)
 		skb->dev = dsa_conduit_find_user(netdev, switch_id, source_port);
-- 
2.34.1

[PATCH net-next v4 04/12] net: dsa: tag_sja1105: absorb entire sja1105_vlan_rcv() into dsa_8021q_rcv()

[Pawel Dembicki]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

tag_sja1105 has a wrapper over dsa_8021q_rcv(): sja1105_vlan_rcv(),
which determines whether the packet came from a bridge with
vlan_filtering=1 (the case resolved via
dsa_find_designated_bridge_port_by_vid()), or if it contains a tag_8021q
header.

Looking at a new tagger implementation for vsc73xx, based also on
tag_8021q, it is becoming clear that the logic is needed there as well.
So instead of forcing each tagger to wrap around dsa_8021q_rcv(), let's
merge the logic into the core.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
---
v4:
  - resend only
v3:
  - removed goto
  - removed unnecessary vbid assignment
  - added 'Tested-by' and 'Reviewed-by' fields
v2,v1:
  - resend only
---
Before patch series split:
https://patchwork.kernel.org/project/netdevbpf/list/?series=841034&state=%2A&archive=both
v8, v7, v6:
  - resend only
v5:
  - add missing SoB
v4:
  - introduced patch
---
 net/dsa/tag_8021q.c        | 34 ++++++++++++++++++++++++++++------
 net/dsa/tag_8021q.h        |  2 +-
 net/dsa/tag_ocelot_8021q.c |  2 +-
 net/dsa/tag_sja1105.c      | 32 ++++----------------------------
 4 files changed, 34 insertions(+), 36 deletions(-)

diff --git a/net/dsa/tag_8021q.c b/net/dsa/tag_8021q.c
index 3cb0293793a5..2d1c554a63ff 100644
--- a/net/dsa/tag_8021q.c
+++ b/net/dsa/tag_8021q.c
@@ -507,27 +507,48 @@ EXPORT_SYMBOL_GPL(dsa_tag_8021q_find_port_by_vbid);
  * @vbid: pointer to storage for imprecise bridge ID. Must be pre-initialized
  *	with -1. If a positive value is returned, the source_port and switch_id
  *	are invalid.
+ * @vid: pointer to storage for original VID, in case tag_8021q decoding failed.
+ *
+ * If the packet has a tag_8021q header, decode it and set @source_port,
+ * @switch_id and @vbid, and strip the header. Otherwise set @vid and keep the
+ * header in the hwaccel area of the packet.
  */
 void dsa_8021q_rcv(struct sk_buff *skb, int *source_port, int *switch_id,
-		   int *vbid)
+		   int *vbid, int *vid)
 {
 	int tmp_source_port, tmp_switch_id, tmp_vbid;
-	u16 vid, tci;
+	__be16 vlan_proto;
+	u16 tmp_vid, tci;
 
 	if (skb_vlan_tag_present(skb)) {
+		vlan_proto = skb->vlan_proto;
 		tci = skb_vlan_tag_get(skb);
 		__vlan_hwaccel_clear_tag(skb);
 	} else {
+		struct vlan_ethhdr *hdr = vlan_eth_hdr(skb);
+
+		vlan_proto = hdr->h_vlan_proto;
 		skb_push_rcsum(skb, ETH_HLEN);
 		__skb_vlan_pop(skb, &tci);
 		skb_pull_rcsum(skb, ETH_HLEN);
 	}
 
-	vid = tci & VLAN_VID_MASK;
+	tmp_vid = tci & VLAN_VID_MASK;
+	if (!vid_is_dsa_8021q(tmp_vid)) {
+		/* Not a tag_8021q frame, so return the VID to the
+		 * caller for further processing, and put the tag back
+		 */
+		if (vid)
+			*vid = tmp_vid;
+
+		__vlan_hwaccel_put_tag(skb, vlan_proto, tci);
+
+		return;
+	}
 
-	tmp_source_port = dsa_8021q_rx_source_port(vid);
-	tmp_switch_id = dsa_8021q_rx_switch_id(vid);
-	tmp_vbid = dsa_tag_8021q_rx_vbid(vid);
+	tmp_source_port = dsa_8021q_rx_source_port(tmp_vid);
+	tmp_switch_id = dsa_8021q_rx_switch_id(tmp_vid);
+	tmp_vbid = dsa_tag_8021q_rx_vbid(tmp_vid);
 
 	/* Precise source port information is unknown when receiving from a
 	 * VLAN-unaware bridging domain, and tmp_source_port and tmp_switch_id
@@ -546,5 +567,6 @@ void dsa_8021q_rcv(struct sk_buff *skb, int *source_port, int *switch_id,
 		*vbid = tmp_vbid;
 
 	skb->priority = (tci & VLAN_PRIO_MASK) >> VLAN_PRIO_SHIFT;
+	return;
 }
 EXPORT_SYMBOL_GPL(dsa_8021q_rcv);
diff --git a/net/dsa/tag_8021q.h b/net/dsa/tag_8021q.h
index 41f7167ac520..0c6671d7c1c2 100644
--- a/net/dsa/tag_8021q.h
+++ b/net/dsa/tag_8021q.h
@@ -14,7 +14,7 @@ struct sk_buff *dsa_8021q_xmit(struct sk_buff *skb, struct net_device *netdev,
 			       u16 tpid, u16 tci);
 
 void dsa_8021q_rcv(struct sk_buff *skb, int *source_port, int *switch_id,
-		   int *vbid);
+		   int *vbid, int *vid);
 
 struct net_device *dsa_tag_8021q_find_port_by_vbid(struct net_device *conduit,
 						   int vbid);
diff --git a/net/dsa/tag_ocelot_8021q.c b/net/dsa/tag_ocelot_8021q.c
index b059381310fe..8e8b1bef6af6 100644
--- a/net/dsa/tag_ocelot_8021q.c
+++ b/net/dsa/tag_ocelot_8021q.c
@@ -81,7 +81,7 @@ static struct sk_buff *ocelot_rcv(struct sk_buff *skb,
 {
 	int src_port, switch_id;
 
-	dsa_8021q_rcv(skb, &src_port, &switch_id, NULL);
+	dsa_8021q_rcv(skb, &src_port, &switch_id, NULL, NULL);
 
 	skb->dev = dsa_conduit_find_user(netdev, switch_id, src_port);
 	if (!skb->dev)
diff --git a/net/dsa/tag_sja1105.c b/net/dsa/tag_sja1105.c
index 48886d4b7e3e..7639ccb94d35 100644
--- a/net/dsa/tag_sja1105.c
+++ b/net/dsa/tag_sja1105.c
@@ -472,37 +472,14 @@ static bool sja1110_skb_has_inband_control_extension(const struct sk_buff *skb)
 	return ntohs(eth_hdr(skb)->h_proto) == ETH_P_SJA1110;
 }
 
-/* If the VLAN in the packet is a tag_8021q one, set @source_port and
- * @switch_id and strip the header. Otherwise set @vid and keep it in the
- * packet.
- */
-static void sja1105_vlan_rcv(struct sk_buff *skb, int *source_port,
-			     int *switch_id, int *vbid, u16 *vid)
-{
-	struct vlan_ethhdr *hdr = vlan_eth_hdr(skb);
-	u16 vlan_tci;
-
-	if (skb_vlan_tag_present(skb))
-		vlan_tci = skb_vlan_tag_get(skb);
-	else
-		vlan_tci = ntohs(hdr->h_vlan_TCI);
-
-	if (vid_is_dsa_8021q(vlan_tci & VLAN_VID_MASK))
-		return dsa_8021q_rcv(skb, source_port, switch_id, vbid);
-
-	/* Try our best with imprecise RX */
-	*vid = vlan_tci & VLAN_VID_MASK;
-}
-
 static struct sk_buff *sja1105_rcv(struct sk_buff *skb,
 				   struct net_device *netdev)
 {
-	int source_port = -1, switch_id = -1, vbid = -1;
+	int source_port = -1, switch_id = -1, vbid = -1, vid = -1;
 	struct sja1105_meta meta = {0};
 	struct ethhdr *hdr;
 	bool is_link_local;
 	bool is_meta;
-	u16 vid;
 
 	hdr = eth_hdr(skb);
 	is_link_local = sja1105_is_link_local(skb);
@@ -525,7 +502,7 @@ static struct sk_buff *sja1105_rcv(struct sk_buff *skb,
 	 * a tag_8021q VLAN which we have to strip
 	 */
 	if (sja1105_skb_has_tag_8021q(skb))
-		sja1105_vlan_rcv(skb, &source_port, &switch_id, &vbid, &vid);
+		dsa_8021q_rcv(skb, &source_port, &switch_id, &vbid, &vid);
 	else if (source_port == -1 && switch_id == -1)
 		/* Packets with no source information have no chance of
 		 * getting accepted, drop them straight away.
@@ -660,9 +637,8 @@ static struct sk_buff *sja1110_rcv_inband_control_extension(struct sk_buff *skb,
 static struct sk_buff *sja1110_rcv(struct sk_buff *skb,
 				   struct net_device *netdev)
 {
-	int source_port = -1, switch_id = -1, vbid = -1;
+	int source_port = -1, switch_id = -1, vbid = -1, vid = -1;
 	bool host_only = false;
-	u16 vid = 0;
 
 	if (sja1110_skb_has_inband_control_extension(skb)) {
 		skb = sja1110_rcv_inband_control_extension(skb, &source_port,
@@ -674,7 +650,7 @@ static struct sk_buff *sja1110_rcv(struct sk_buff *skb,
 
 	/* Packets with in-band control extensions might still have RX VLANs */
 	if (likely(sja1105_skb_has_tag_8021q(skb)))
-		sja1105_vlan_rcv(skb, &source_port, &switch_id, &vbid, &vid);
+		dsa_8021q_rcv(skb, &source_port, &switch_id, &vbid, &vid);
 
 	if (vbid >= 1)
 		skb->dev = dsa_tag_8021q_find_port_by_vbid(netdev, vbid);
-- 
2.34.1

[PATCH net-next v4 05/12] net: dsa: tag_sja1105: prefer precise source port info on SJA1110 too

[Pawel Dembicki]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

Now that dsa_8021q_rcv() handles better the case where we don't
overwrite the precise source information if it comes from an external
(non-tag_8021q) source, we can now unify the call sequence between
sja1105_rcv() and sja1110_rcv().

This is a preparatory change for creating a higher-level wrapper for the
entire sequence which will live in tag_8021q.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
---
v4:
  - resend only
v3:
  - added 'Reviewed-by' only
v2, v1:
  - resend only
---
Before patch series split:
https://patchwork.kernel.org/project/netdevbpf/list/?series=841034&state=%2A&archive=both
v8,v7,v6,v5:
  - resend only
v4:
  - introduce patch and replace 'slave' with 'conduit' after rebase
---
 net/dsa/tag_sja1105.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/net/dsa/tag_sja1105.c b/net/dsa/tag_sja1105.c
index 7639ccb94d35..35a6346549f2 100644
--- a/net/dsa/tag_sja1105.c
+++ b/net/dsa/tag_sja1105.c
@@ -652,12 +652,12 @@ static struct sk_buff *sja1110_rcv(struct sk_buff *skb,
 	if (likely(sja1105_skb_has_tag_8021q(skb)))
 		dsa_8021q_rcv(skb, &source_port, &switch_id, &vbid, &vid);
 
-	if (vbid >= 1)
+	if (source_port != -1 && switch_id != -1)
+		skb->dev = dsa_conduit_find_user(netdev, switch_id, source_port);
+	else if (vbid >= 1)
 		skb->dev = dsa_tag_8021q_find_port_by_vbid(netdev, vbid);
-	else if (source_port == -1 || switch_id == -1)
-		skb->dev = dsa_find_designated_bridge_port_by_vid(netdev, vid);
 	else
-		skb->dev = dsa_conduit_find_user(netdev, switch_id, source_port);
+		skb->dev = dsa_find_designated_bridge_port_by_vid(netdev, vid);
 	if (!skb->dev) {
 		netdev_warn(netdev, "Couldn't decode source port\n");
 		return NULL;
-- 
2.34.1

[PATCH net-next v4 06/12] net: dsa: tag_sja1105: refactor skb->dev assignment to dsa_tag_8021q_find_user()

[Pawel Dembicki]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

A new tagging protocol implementation based on tag_8021q is on the
horizon, and it appears that it also has to open-code the complicated
logic of finding a source port based on a VLAN header.

Create a single dsa_tag_8021q_find_user() and make sja1105 call it.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
v4-v1:
  - resend only
---
Before patch series split:
https://patchwork.kernel.org/project/netdevbpf/list/?series=841034&state=%2A&archive=both
v8:
  - resend only
v7:
  - added 'Reviewed-by' only
v6, v5:
  - resend only
v4:
  - introduce patch and change from master to conduit and slave to user
---
 net/dsa/tag_8021q.c   | 19 ++++++++++++++++---
 net/dsa/tag_8021q.h   |  5 +++--
 net/dsa/tag_sja1105.c | 17 +++++------------
 3 files changed, 24 insertions(+), 17 deletions(-)

diff --git a/net/dsa/tag_8021q.c b/net/dsa/tag_8021q.c
index 2d1c554a63ff..c0eee113a2b9 100644
--- a/net/dsa/tag_8021q.c
+++ b/net/dsa/tag_8021q.c
@@ -468,8 +468,8 @@ struct sk_buff *dsa_8021q_xmit(struct sk_buff *skb, struct net_device *netdev,
 }
 EXPORT_SYMBOL_GPL(dsa_8021q_xmit);
 
-struct net_device *dsa_tag_8021q_find_port_by_vbid(struct net_device *conduit,
-						   int vbid)
+static struct net_device *
+dsa_tag_8021q_find_port_by_vbid(struct net_device *conduit, int vbid)
 {
 	struct dsa_port *cpu_dp = conduit->dsa_ptr;
 	struct dsa_switch_tree *dst = cpu_dp->dst;
@@ -495,7 +495,20 @@ struct net_device *dsa_tag_8021q_find_port_by_vbid(struct net_device *conduit,
 
 	return NULL;
 }
-EXPORT_SYMBOL_GPL(dsa_tag_8021q_find_port_by_vbid);
+
+struct net_device *dsa_tag_8021q_find_user(struct net_device *conduit,
+					   int source_port, int switch_id,
+					   int vid, int vbid)
+{
+	/* Always prefer precise source port information, if available */
+	if (source_port != -1 && switch_id != -1)
+		return dsa_conduit_find_user(conduit, switch_id, source_port);
+	else if (vbid >= 1)
+		return dsa_tag_8021q_find_port_by_vbid(conduit, vbid);
+
+	return dsa_find_designated_bridge_port_by_vid(conduit, vid);
+}
+EXPORT_SYMBOL_GPL(dsa_tag_8021q_find_user);
 
 /**
  * dsa_8021q_rcv - Decode source information from tag_8021q header
diff --git a/net/dsa/tag_8021q.h b/net/dsa/tag_8021q.h
index 0c6671d7c1c2..27b8906f99ec 100644
--- a/net/dsa/tag_8021q.h
+++ b/net/dsa/tag_8021q.h
@@ -16,8 +16,9 @@ struct sk_buff *dsa_8021q_xmit(struct sk_buff *skb, struct net_device *netdev,
 void dsa_8021q_rcv(struct sk_buff *skb, int *source_port, int *switch_id,
 		   int *vbid, int *vid);
 
-struct net_device *dsa_tag_8021q_find_port_by_vbid(struct net_device *conduit,
-						   int vbid);
+struct net_device *dsa_tag_8021q_find_user(struct net_device *conduit,
+					   int source_port, int switch_id,
+					   int vid, int vbid);
 
 int dsa_switch_tag_8021q_vlan_add(struct dsa_switch *ds,
 				  struct dsa_notifier_tag_8021q_vlan_info *info);
diff --git a/net/dsa/tag_sja1105.c b/net/dsa/tag_sja1105.c
index 35a6346549f2..3e902af7eea6 100644
--- a/net/dsa/tag_sja1105.c
+++ b/net/dsa/tag_sja1105.c
@@ -509,12 +509,8 @@ static struct sk_buff *sja1105_rcv(struct sk_buff *skb,
 		 */
 		return NULL;
 
-	if (source_port != -1 && switch_id != -1)
-		skb->dev = dsa_conduit_find_user(netdev, switch_id, source_port);
-	else if (vbid >= 1)
-		skb->dev = dsa_tag_8021q_find_port_by_vbid(netdev, vbid);
-	else
-		skb->dev = dsa_find_designated_bridge_port_by_vid(netdev, vid);
+	skb->dev = dsa_tag_8021q_find_user(netdev, source_port, switch_id,
+					   vid, vbid);
 	if (!skb->dev) {
 		netdev_warn(netdev, "Couldn't decode source port\n");
 		return NULL;
@@ -652,12 +648,9 @@ static struct sk_buff *sja1110_rcv(struct sk_buff *skb,
 	if (likely(sja1105_skb_has_tag_8021q(skb)))
 		dsa_8021q_rcv(skb, &source_port, &switch_id, &vbid, &vid);
 
-	if (source_port != -1 && switch_id != -1)
-		skb->dev = dsa_conduit_find_user(netdev, switch_id, source_port);
-	else if (vbid >= 1)
-		skb->dev = dsa_tag_8021q_find_port_by_vbid(netdev, vbid);
-	else
-		skb->dev = dsa_find_designated_bridge_port_by_vid(netdev, vid);
+	skb->dev = dsa_tag_8021q_find_user(netdev, source_port, switch_id,
+					   vid, vbid);
+
 	if (!skb->dev) {
 		netdev_warn(netdev, "Couldn't decode source port\n");
 		return NULL;
-- 
2.34.1

[PATCH net-next v4 07/12] net: dsa: vsc73xx: introduce tag 8021q for vsc73xx

[Pawel Dembicki]

This commit introduces a new tagger based on 802.1q tagging.
It's designed for the vsc73xx driver. The VSC73xx family doesn't have
any tag support for the RGMII port, but it could be based on VLANs.

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
v4-v1:
  - resend only
---
Before patch series split:
https://patchwork.kernel.org/project/netdevbpf/list/?series=841034&state=%2A&archive=both
v8:
  - added 'Reviewed-by' only
v7:
  - replace netdev_warn by dev_warn_ratelimited
v6:
  - added missing MODULE_DESCRIPTION()
v5:
  - removed skb_vlan_tag_present(skb) checking
  - use 80 characters per line limit
v4:
  - rebase to net-next/main
v3:
  - Introduce a patch after the tagging patch split
---
 include/net/dsa.h           |  2 ++
 net/dsa/Kconfig             |  6 ++++
 net/dsa/Makefile            |  1 +
 net/dsa/tag_vsc73xx_8021q.c | 68 +++++++++++++++++++++++++++++++++++++
 4 files changed, 77 insertions(+)
 create mode 100644 net/dsa/tag_vsc73xx_8021q.c

diff --git a/include/net/dsa.h b/include/net/dsa.h
index f9ae3ca66b6f..5a5a03a7b4c3 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -53,6 +53,7 @@ struct tc_action;
 #define DSA_TAG_PROTO_RTL8_4T_VALUE		25
 #define DSA_TAG_PROTO_RZN1_A5PSW_VALUE		26
 #define DSA_TAG_PROTO_LAN937X_VALUE		27
+#define DSA_TAG_PROTO_VSC73XX_8021Q_VALUE	28
 
 enum dsa_tag_protocol {
 	DSA_TAG_PROTO_NONE		= DSA_TAG_PROTO_NONE_VALUE,
@@ -83,6 +84,7 @@ enum dsa_tag_protocol {
 	DSA_TAG_PROTO_RTL8_4T		= DSA_TAG_PROTO_RTL8_4T_VALUE,
 	DSA_TAG_PROTO_RZN1_A5PSW	= DSA_TAG_PROTO_RZN1_A5PSW_VALUE,
 	DSA_TAG_PROTO_LAN937X		= DSA_TAG_PROTO_LAN937X_VALUE,
+	DSA_TAG_PROTO_VSC73XX_8021Q	= DSA_TAG_PROTO_VSC73XX_8021Q_VALUE,
 };
 
 struct dsa_switch;
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index 8d5bf869eb14..2dfe9063613f 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -166,6 +166,12 @@ config NET_DSA_TAG_TRAILER
 	  Say Y or M if you want to enable support for tagging frames at
 	  with a trailed. e.g. Marvell 88E6060.
 
+config NET_DSA_TAG_VSC73XX_8021Q
+	tristate "Tag driver for Microchip/Vitesse VSC73xx family of switches, using VLAN"
+	help
+	  Say Y or M if you want to enable support for tagging frames with a
+	  custom VLAN-based header.
+
 config NET_DSA_TAG_XRS700X
 	tristate "Tag driver for XRS700x switches"
 	help
diff --git a/net/dsa/Makefile b/net/dsa/Makefile
index 8a1894a42552..555c07cfeb71 100644
--- a/net/dsa/Makefile
+++ b/net/dsa/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_NET_DSA_TAG_RTL8_4) += tag_rtl8_4.o
 obj-$(CONFIG_NET_DSA_TAG_RZN1_A5PSW) += tag_rzn1_a5psw.o
 obj-$(CONFIG_NET_DSA_TAG_SJA1105) += tag_sja1105.o
 obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
+obj-$(CONFIG_NET_DSA_TAG_VSC73XX_8021Q) += tag_vsc73xx_8021q.o
 obj-$(CONFIG_NET_DSA_TAG_XRS700X) += tag_xrs700x.o
 
 # for tracing framework to find trace.h
diff --git a/net/dsa/tag_vsc73xx_8021q.c b/net/dsa/tag_vsc73xx_8021q.c
new file mode 100644
index 000000000000..af121a9aff7f
--- /dev/null
+++ b/net/dsa/tag_vsc73xx_8021q.c
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/* Copyright (C) 2024 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+#include <linux/dsa/8021q.h>
+
+#include "tag.h"
+#include "tag_8021q.h"
+
+#define VSC73XX_8021Q_NAME "vsc73xx-8021q"
+
+static struct sk_buff *
+vsc73xx_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+	struct dsa_port *dp = dsa_user_to_port(netdev);
+	u16 queue_mapping = skb_get_queue_mapping(skb);
+	u16 tx_vid = dsa_tag_8021q_standalone_vid(dp);
+	u8 pcp;
+
+	if (skb->offload_fwd_mark) {
+		unsigned int bridge_num = dsa_port_bridge_num_get(dp);
+		struct net_device *br = dsa_port_bridge_dev_get(dp);
+
+		if (br_vlan_enabled(br))
+			return skb;
+
+		tx_vid = dsa_tag_8021q_bridge_vid(bridge_num);
+	}
+
+	pcp = netdev_txq_to_tc(netdev, queue_mapping);
+
+	return dsa_8021q_xmit(skb, netdev, ETH_P_8021Q,
+			      ((pcp << VLAN_PRIO_SHIFT) | tx_vid));
+}
+
+static struct sk_buff *
+vsc73xx_rcv(struct sk_buff *skb, struct net_device *netdev)
+{
+	int src_port = -1, switch_id = -1, vbid = -1, vid = -1;
+
+	dsa_8021q_rcv(skb, &src_port, &switch_id, &vbid, &vid);
+
+	skb->dev = dsa_tag_8021q_find_user(netdev, src_port, switch_id,
+					   vid, vbid);
+	if (!skb->dev) {
+		dev_warn_ratelimited(&netdev->dev,
+				     "Couldn't decode source port\n");
+		return NULL;
+	}
+
+	dsa_default_offload_fwd_mark(skb);
+
+	return skb;
+}
+
+static const struct dsa_device_ops vsc73xx_8021q_netdev_ops = {
+	.name			= VSC73XX_8021Q_NAME,
+	.proto			= DSA_TAG_PROTO_VSC73XX_8021Q,
+	.xmit			= vsc73xx_xmit,
+	.rcv			= vsc73xx_rcv,
+	.needed_headroom	= VLAN_HLEN,
+	.promisc_on_conduit	= true,
+};
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("DSA tag driver for VSC73XX family of switches, using VLAN");
+MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_VSC73XX_8021Q, VSC73XX_8021Q_NAME);
+
+module_dsa_tag_driver(vsc73xx_8021q_netdev_ops);
-- 
2.34.1

[PATCH net-next v4 08/12] net: dsa: vsc73xx: Implement the tag_8021q VLAN operations

[Pawel Dembicki]

This patch is a simple implementation of 802.1q tagging in the vsc73xx
driver. Currently, devices with DSA_TAG_PROTO_NONE are not functional.
The VSC73XX family doesn't provide any tag support for external Ethernet
ports.

The only option available is VLAN-based tagging, which requires constant
hardware VLAN filtering. While the VSC73XX family supports provider
bridging, it only supports QinQ without full implementation of 802.1AD.
This means it only allows the doubled 0x8100 TPID.

In the simple port mode, QinQ is enabled to preserve forwarding of
VLAN-tagged frames.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
---
v4:
  - fix 'commit_to_hardware' assigment in 'vsc73xx_tag_8021q_vlan_del'
v3:
  - added the pvid remove routine to 'vsc73xx_tag_8021q_vlan_del'
  - used 'vsc73xx_vlan_commit_settings' in 'commit_to_hardware' routine
v2:
  - handle raturn values of 'vsc73xx_vlan_commit*' functions
v1:
  - added dsa_tag_8021q_unregister in teardown function
  - moved dsa_tag_8021q_register after vlan database clean operation
---
Before patch series split:
https://patchwork.kernel.org/project/netdevbpf/list/?series=841034&state=%2A&archive=both
v8:
  - resend only
v7:
  - adjust tag8021q implementation for vlan filtering implementation
    changes
v6:
  - resend only
v5:
  - improve commit message
v4:
  - adjust tag8021q implementation for changed untagged vlan storage
  - minor fixes
v3:
  - Split tagger and tag implementation into separate commits
---
 drivers/net/dsa/Kconfig                |  2 +-
 drivers/net/dsa/vitesse-vsc73xx-core.c | 73 ++++++++++++++++++++++++--
 2 files changed, 71 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index 8508b5145bc1..2d10b4d6cfbb 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -127,7 +127,7 @@ config NET_DSA_SMSC_LAN9303_MDIO
 
 config NET_DSA_VITESSE_VSC73XX
 	tristate
-	select NET_DSA_TAG_NONE
+	select NET_DSA_TAG_VSC73XX_8021Q
 	select FIXED_PHY
 	select VITESSE_PHY
 	select GPIOLIB
diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c
index 906bbae22861..25c3cd661b30 100644
--- a/drivers/net/dsa/vitesse-vsc73xx-core.c
+++ b/drivers/net/dsa/vitesse-vsc73xx-core.c
@@ -597,7 +597,7 @@ static enum dsa_tag_protocol vsc73xx_get_tag_protocol(struct dsa_switch *ds,
 	 * cannot access the tag. (See "Internal frame header" section
 	 * 3.9.1 in the manual.)
 	 */
-	return DSA_TAG_PROTO_NONE;
+	return DSA_TAG_PROTO_VSC73XX_8021Q;
 }
 
 static int vsc73xx_wait_for_vlan_table_cmd(struct vsc73xx *vsc)
@@ -687,7 +687,7 @@ vsc73xx_update_vlan_table(struct vsc73xx *vsc, int port, u16 vid, bool set)
 static int vsc73xx_setup(struct dsa_switch *ds)
 {
 	struct vsc73xx *vsc = ds->priv;
-	int i;
+	int i, ret;
 
 	dev_info(vsc->dev, "set up the switch\n");
 
@@ -768,7 +768,18 @@ static int vsc73xx_setup(struct dsa_switch *ds)
 
 	INIT_LIST_HEAD(&vsc->vlans);
 
-	return 0;
+	rtnl_lock();
+	ret = dsa_tag_8021q_register(ds, htons(ETH_P_8021Q));
+	rtnl_unlock();
+
+	return ret;
+}
+
+static void vsc73xx_teardown(struct dsa_switch *ds)
+{
+	rtnl_lock();
+	dsa_tag_8021q_unregister(ds);
+	rtnl_unlock();
 }
 
 static void vsc73xx_init_port(struct vsc73xx *vsc, int port)
@@ -1549,12 +1560,65 @@ static int vsc73xx_port_vlan_del(struct dsa_switch *ds, int port,
 		vsc73xx_bridge_vlan_remove_port(vsc73xx_vlan, port);
 
 	commit_to_hardware = !vsc73xx_tag_8021q_active(dsa_to_port(ds, port));
+
 	if (commit_to_hardware)
 		return vsc73xx_vlan_commit_settings(vsc, port);
 
 	return 0;
 }
 
+static int vsc73xx_tag_8021q_vlan_add(struct dsa_switch *ds, int port, u16 vid,
+				      u16 flags)
+{
+	bool pvid = flags & BRIDGE_VLAN_INFO_PVID;
+	struct vsc73xx_portinfo *portinfo;
+	struct vsc73xx *vsc = ds->priv;
+	bool commit_to_hardware;
+	int ret;
+
+	portinfo = &vsc->portinfo[port];
+
+	if (pvid) {
+		portinfo->pvid_tag_8021q_configured = true;
+		portinfo->pvid_tag_8021q = vid;
+	}
+
+	commit_to_hardware = vsc73xx_tag_8021q_active(dsa_to_port(ds, port));
+	if (commit_to_hardware) {
+		ret = vsc73xx_vlan_commit_settings(vsc, port);
+		if (ret)
+			return ret;
+	}
+
+	return vsc73xx_update_vlan_table(vsc, port, vid, true);
+}
+
+static int vsc73xx_tag_8021q_vlan_del(struct dsa_switch *ds, int port, u16 vid)
+{
+	struct vsc73xx_portinfo *portinfo;
+	struct vsc73xx *vsc = ds->priv;
+
+	portinfo = &vsc->portinfo[port];
+
+	if (portinfo->pvid_tag_8021q_configured &&
+	    portinfo->pvid_tag_8021q == vid) {
+		struct dsa_port *dp = dsa_to_port(ds, port);
+		bool commit_to_hardware;
+		int err;
+
+		portinfo->pvid_tag_8021q_configured = false;
+
+		commit_to_hardware = vsc73xx_tag_8021q_active(dp);
+		if (commit_to_hardware) {
+			err = vsc73xx_vlan_commit_settings(vsc, port);
+			if (err)
+				return err;
+		}
+	}
+
+	return vsc73xx_update_vlan_table(vsc, port, vid, false);
+}
+
 static void vsc73xx_refresh_fwd_map(struct dsa_switch *ds, int port, u8 state)
 {
 	struct dsa_port *other_dp, *dp = dsa_to_port(ds, port);
@@ -1644,6 +1708,7 @@ static const struct phylink_mac_ops vsc73xx_phylink_mac_ops = {
 static const struct dsa_switch_ops vsc73xx_ds_ops = {
 	.get_tag_protocol = vsc73xx_get_tag_protocol,
 	.setup = vsc73xx_setup,
+	.teardown = vsc73xx_teardown,
 	.phy_read = vsc73xx_phy_read,
 	.phy_write = vsc73xx_phy_write,
 	.get_strings = vsc73xx_get_strings,
@@ -1658,6 +1723,8 @@ static const struct dsa_switch_ops vsc73xx_ds_ops = {
 	.port_vlan_add = vsc73xx_port_vlan_add,
 	.port_vlan_del = vsc73xx_port_vlan_del,
 	.phylink_get_caps = vsc73xx_phylink_get_caps,
+	.tag_8021q_vlan_add = vsc73xx_tag_8021q_vlan_add,
+	.tag_8021q_vlan_del = vsc73xx_tag_8021q_vlan_del,
 };
 
 static int vsc73xx_gpio_get(struct gpio_chip *chip, unsigned int offset)
-- 
2.34.1

[PATCH net-next v4 09/12] net: dsa: Define max num of bridges in tag8021q implementation

[Pawel Dembicki]

Max number of bridges in tag8021q implementation is strictly limited
by VBID size: 3 bits. But zero is reserved and only 7 values can be used.

This patch adds define which describe maximum possible value.

Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
---
v4:
  - resend only
v3:
  - added 'Reviewed-by' only
v2, v1:
  - resend only
---
Before patch series split:
https://patchwork.kernel.org/project/netdevbpf/list/?series=841034&state=%2A&archive=both
v8:
  - resend only
v7:
  - added 'Reviewed-by' only
v6:
  - resend only
v5:
  - added 'Reviewed-by' only
v4:
  - introduce patch
---
 drivers/net/dsa/sja1105/sja1105_main.c | 3 +--
 include/linux/dsa/8021q.h              | 5 +++++
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index ee0fb1c343f1..0c55a29d7dd3 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -3167,8 +3167,7 @@ static int sja1105_setup(struct dsa_switch *ds)
 	ds->vlan_filtering_is_global = true;
 	ds->untag_bridge_pvid = true;
 	ds->fdb_isolation = true;
-	/* tag_8021q has 3 bits for the VBID, and the value 0 is reserved */
-	ds->max_num_bridges = 7;
+	ds->max_num_bridges = DSA_TAG_8021Q_MAX_NUM_BRIDGES;
 
 	/* Advertise the 8 egress queues */
 	ds->num_tx_queues = SJA1105_NUM_TC;
diff --git a/include/linux/dsa/8021q.h b/include/linux/dsa/8021q.h
index f3664ee12170..1dda2a13b832 100644
--- a/include/linux/dsa/8021q.h
+++ b/include/linux/dsa/8021q.h
@@ -8,6 +8,11 @@
 #include <net/dsa.h>
 #include <linux/types.h>
 
+/* VBID is limited to three bits only and zero is reserved.
+ * Only 7 bridges can be enumerated.
+ */
+#define DSA_TAG_8021Q_MAX_NUM_BRIDGES	7
+
 int dsa_tag_8021q_register(struct dsa_switch *ds, __be16 proto);
 
 void dsa_tag_8021q_unregister(struct dsa_switch *ds);
-- 
2.34.1

[PATCH net-next v4 10/12] net: dsa: prepare 'dsa_tag_8021q_bridge_join' for standalone use

[Pawel Dembicki]

The 'dsa_tag_8021q_bridge_join' could be used as a generic implementation
of the 'ds->ops->port_bridge_join()' function. However, it is necessary
to synchronize their arguments.

This patch also moves the 'tx_fwd_offload' flag configuration line into
'dsa_tag_8021q_bridge_join' body. Currently, every (sja1105) driver sets
it, and the future vsc73xx implementation will also need it for
simplification.

Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
---
v4:
  - resend only
v3:
  - added 'Reviewed-by' only
v2:
  - resend only
v1:
  - introduce patch
---
 drivers/net/dsa/sja1105/sja1105_main.c | 5 ++---
 include/linux/dsa/8021q.h              | 3 ++-
 net/dsa/tag_8021q.c                    | 5 ++++-
 3 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index 0c55a29d7dd3..c7282ce3d11c 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -2133,14 +2133,13 @@ static int sja1105_bridge_join(struct dsa_switch *ds, int port,
 	if (rc)
 		return rc;
 
-	rc = dsa_tag_8021q_bridge_join(ds, port, bridge);
+	rc = dsa_tag_8021q_bridge_join(ds, port, bridge, tx_fwd_offload,
+				       extack);
 	if (rc) {
 		sja1105_bridge_member(ds, port, bridge, false);
 		return rc;
 	}
 
-	*tx_fwd_offload = true;
-
 	return 0;
 }
 
diff --git a/include/linux/dsa/8021q.h b/include/linux/dsa/8021q.h
index 1dda2a13b832..d13aabdeb4b2 100644
--- a/include/linux/dsa/8021q.h
+++ b/include/linux/dsa/8021q.h
@@ -18,7 +18,8 @@ int dsa_tag_8021q_register(struct dsa_switch *ds, __be16 proto);
 void dsa_tag_8021q_unregister(struct dsa_switch *ds);
 
 int dsa_tag_8021q_bridge_join(struct dsa_switch *ds, int port,
-			      struct dsa_bridge bridge);
+			      struct dsa_bridge bridge, bool *tx_fwd_offload,
+			      struct netlink_ext_ack *extack);
 
 void dsa_tag_8021q_bridge_leave(struct dsa_switch *ds, int port,
 				struct dsa_bridge bridge);
diff --git a/net/dsa/tag_8021q.c b/net/dsa/tag_8021q.c
index c0eee113a2b9..3ee53e28ec2e 100644
--- a/net/dsa/tag_8021q.c
+++ b/net/dsa/tag_8021q.c
@@ -286,7 +286,8 @@ int dsa_switch_tag_8021q_vlan_del(struct dsa_switch *ds,
  * be used for VLAN-unaware bridging.
  */
 int dsa_tag_8021q_bridge_join(struct dsa_switch *ds, int port,
-			      struct dsa_bridge bridge)
+			      struct dsa_bridge bridge, bool *tx_fwd_offload,
+			      struct netlink_ext_ack *extack)
 {
 	struct dsa_port *dp = dsa_to_port(ds, port);
 	u16 standalone_vid, bridge_vid;
@@ -304,6 +305,8 @@ int dsa_tag_8021q_bridge_join(struct dsa_switch *ds, int port,
 
 	dsa_port_tag_8021q_vlan_del(dp, standalone_vid, false);
 
+	*tx_fwd_offload = true;
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(dsa_tag_8021q_bridge_join);
-- 
2.34.1

[PATCH net-next v4 11/12] net: dsa: vsc73xx: Add bridge support

[Pawel Dembicki]

This patch adds bridge support for the vsc73xx driver.

The vsc73xx requires minimal operations and ithe generic
dsa_tag_8021q_bridge_* API is sufficient.
The forwarding matrix is managed by vsc73xx_port_stp_state_set() ->
vsc73xx_refresh_fwd_map()i routine, which is called immediately after
.port_bridge_join() and .port_bridge_leave().

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
---
v4:
  - resend only
v3:
  - improved commit description
  - added 'Reviewed-by'
v2, v1:
  - Use generic functions instead unnecessary intermediary shims
---
Before patch series split:
https://patchwork.kernel.org/project/netdevbpf/list/?series=841034&state=%2A&archive=both
v8:
  - resend only
v7:
  - added 'Reviewed-by' only
v6:
  - resend only
v5:
  - added 'Reviewed-by' only
v4:
  - remove forward configuration after stp patch refactoring
  - implement new define with max num of bridges for tag8021q devices
v3:
  - All vlan commits was reworked
  - move VLAN_AWR and VLAN_DBLAWR to port setup in other commit
  - drop vlan table upgrade
v2:
  - no changes done
---
 drivers/net/dsa/vitesse-vsc73xx-core.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c
index 25c3cd661b30..d0e501bbd57d 100644
--- a/drivers/net/dsa/vitesse-vsc73xx-core.c
+++ b/drivers/net/dsa/vitesse-vsc73xx-core.c
@@ -691,6 +691,9 @@ static int vsc73xx_setup(struct dsa_switch *ds)
 
 	dev_info(vsc->dev, "set up the switch\n");
 
+	ds->untag_bridge_pvid = true;
+	ds->max_num_bridges = DSA_TAG_8021Q_MAX_NUM_BRIDGES;
+
 	/* Issue RESET */
 	vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET,
 		      VSC73XX_GLORESET_MASTER_RESET);
@@ -1716,6 +1719,8 @@ static const struct dsa_switch_ops vsc73xx_ds_ops = {
 	.get_sset_count = vsc73xx_get_sset_count,
 	.port_enable = vsc73xx_port_enable,
 	.port_disable = vsc73xx_port_disable,
+	.port_bridge_join = dsa_tag_8021q_bridge_join,
+	.port_bridge_leave = dsa_tag_8021q_bridge_leave,
 	.port_change_mtu = vsc73xx_change_mtu,
 	.port_max_mtu = vsc73xx_get_max_mtu,
 	.port_stp_state_set = vsc73xx_port_stp_state_set,
-- 
2.34.1

[PATCH net-next v4 12/12] net: dsa: vsc73xx: start treating the BR_LEARNING flag

[Pawel Dembicki]

This patch implements .port_pre_bridge_flags() and .port_bridge_flags(),
which are required for properly treating the BR_LEARNING flag. Also,
.port_stp_state_set() is tweaked and now disables learning for standalone
ports.

Disabling learning for standalone ports is required to avoid situations
where one port sees traffic originating from another, which could cause
packet drops.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
---
v4-v1:
  - resend only
---
Before patch series split:
https://patchwork.kernel.org/project/netdevbpf/list/?series=841034&state=%2A&archive=both
v8:
  - resend only
v7:
  - added 'Acked-by' and 'Reviewed-by' and improve  commit message
v6:
  - fix arranging local variables in reverse xmas tree order
v5:
  - introduce patch
---
 drivers/net/dsa/vitesse-vsc73xx-core.c | 41 ++++++++++++++++++++++----
 1 file changed, 35 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c
index d0e501bbd57d..d9d3e30fd47a 100644
--- a/drivers/net/dsa/vitesse-vsc73xx-core.c
+++ b/drivers/net/dsa/vitesse-vsc73xx-core.c
@@ -1622,6 +1622,31 @@ static int vsc73xx_tag_8021q_vlan_del(struct dsa_switch *ds, int port, u16 vid)
 	return vsc73xx_update_vlan_table(vsc, port, vid, false);
 }
 
+static int vsc73xx_port_pre_bridge_flags(struct dsa_switch *ds, int port,
+					 struct switchdev_brport_flags flags,
+					 struct netlink_ext_ack *extack)
+{
+	if (flags.mask & ~BR_LEARNING)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int vsc73xx_port_bridge_flags(struct dsa_switch *ds, int port,
+				     struct switchdev_brport_flags flags,
+				     struct netlink_ext_ack *extack)
+{
+	if (flags.mask & BR_LEARNING) {
+		u32 val = flags.val & BR_LEARNING ? BIT(port) : 0;
+		struct vsc73xx *vsc = ds->priv;
+
+		return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+					   VSC73XX_LEARNMASK, BIT(port), val);
+	}
+
+	return 0;
+}
+
 static void vsc73xx_refresh_fwd_map(struct dsa_switch *ds, int port, u8 state)
 {
 	struct dsa_port *other_dp, *dp = dsa_to_port(ds, port);
@@ -1682,19 +1707,21 @@ static void vsc73xx_refresh_fwd_map(struct dsa_switch *ds, int port, u8 state)
 static void vsc73xx_port_stp_state_set(struct dsa_switch *ds, int port,
 				       u8 state)
 {
+	struct dsa_port *dp = dsa_to_port(ds, port);
 	struct vsc73xx *vsc = ds->priv;
-	u32 val;
+	u32 val = 0;
+
+	if (state == BR_STATE_LEARNING || state == BR_STATE_FORWARDING)
+		val = dp->learning ? BIT(port) : 0;
+
+	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+			    VSC73XX_LEARNMASK, BIT(port), val);
 
 	val = (state == BR_STATE_BLOCKING || state == BR_STATE_DISABLED) ?
 	      0 : BIT(port);
 	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
 			    VSC73XX_RECVMASK, BIT(port), val);
 
-	val = (state == BR_STATE_LEARNING || state == BR_STATE_FORWARDING) ?
-	      BIT(port) : 0;
-	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
-			    VSC73XX_LEARNMASK, BIT(port), val);
-
 	/* CPU Port should always forward packets when user ports are forwarding
 	 * so let's configure it from other ports only.
 	 */
@@ -1719,6 +1746,8 @@ static const struct dsa_switch_ops vsc73xx_ds_ops = {
 	.get_sset_count = vsc73xx_get_sset_count,
 	.port_enable = vsc73xx_port_enable,
 	.port_disable = vsc73xx_port_disable,
+	.port_pre_bridge_flags = vsc73xx_port_pre_bridge_flags,
+	.port_bridge_flags = vsc73xx_port_bridge_flags,
 	.port_bridge_join = dsa_tag_8021q_bridge_join,
 	.port_bridge_leave = dsa_tag_8021q_bridge_leave,
 	.port_change_mtu = vsc73xx_change_mtu,
-- 
2.34.1

Re: [PATCH net-next v4 02/12] net: dsa: vsc73xx: Add vlan filtering

[Vladimir Oltean]

On Sat, Jul 13, 2024 at 11:16:08PM +0200, Pawel Dembicki wrote:
> This patch implements VLAN filtering for the vsc73xx driver.
> 
> After starting VLAN filtering, the switch is reconfigured from QinQ to
> a simple VLAN aware mode. This is required because VSC73XX chips do not
> support inner VLAN tag filtering.
> 
> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
> ---

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>

Re: [PATCH net-next v4 08/12] net: dsa: vsc73xx: Implement the tag_8021q VLAN operations

[Vladimir Oltean]

On Sat, Jul 13, 2024 at 11:16:14PM +0200, Pawel Dembicki wrote:
> This patch is a simple implementation of 802.1q tagging in the vsc73xx
> driver. Currently, devices with DSA_TAG_PROTO_NONE are not functional.
> The VSC73XX family doesn't provide any tag support for external Ethernet
> ports.
> 
> The only option available is VLAN-based tagging, which requires constant
> hardware VLAN filtering. While the VSC73XX family supports provider
> bridging, it only supports QinQ without full implementation of 802.1AD.
> This means it only allows the doubled 0x8100 TPID.
> 
> In the simple port mode, QinQ is enabled to preserve forwarding of
> VLAN-tagged frames.
> 
> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
> ---

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>

Re: [PATCH net-next v4 00/12] net: dsa: vsc73xx: Implement VLAN operations

[Vladimir Oltean]

On Sat, Jul 13, 2024 at 11:16:06PM +0200, Pawel Dembicki wrote:
> This patch series is a result of splitting a larger patch series [0],
> where some parts was merged before.

It is a good day for this driver. Thanks for your perseverence with this.

Re: [PATCH net-next v4 00/12] net: dsa: vsc73xx: Implement VLAN operations

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@kernel.org>:

On Sat, 13 Jul 2024 23:16:06 +0200 you wrote:
> This patch series is a result of splitting a larger patch series [0],
> where some parts was merged before.
> 
> The first patch implements port state configuration, which is required
> for bridge functionality. STP frames are not forwarded at this moment.
> BPDU frames are only forwarded from/to the PI/SI interface.
> For more information, see chapter 2.7.1 (CPU Forwarding) in the
> datasheet.
> 
> [...]

Here is the summary with links:
  - [net-next,v4,01/12] net: dsa: vsc73xx: add port_stp_state_set function
    https://git.kernel.org/netdev/net-next/c/1e5b23e50ffb
  - [net-next,v4,02/12] net: dsa: vsc73xx: Add vlan filtering
    https://git.kernel.org/netdev/net-next/c/6b783ded364a
  - [net-next,v4,03/12] net: dsa: tag_sja1105: absorb logic for not overwriting precise info into dsa_8021q_rcv()
    https://git.kernel.org/netdev/net-next/c/dcfe7673787b
  - [net-next,v4,04/12] net: dsa: tag_sja1105: absorb entire sja1105_vlan_rcv() into dsa_8021q_rcv()
    https://git.kernel.org/netdev/net-next/c/0064b863abdc
  - [net-next,v4,05/12] net: dsa: tag_sja1105: prefer precise source port info on SJA1110 too
    https://git.kernel.org/netdev/net-next/c/823e5cc141c6
  - [net-next,v4,06/12] net: dsa: tag_sja1105: refactor skb->dev assignment to dsa_tag_8021q_find_user()
    https://git.kernel.org/netdev/net-next/c/d124cf54df6f
  - [net-next,v4,07/12] net: dsa: vsc73xx: introduce tag 8021q for vsc73xx
    https://git.kernel.org/netdev/net-next/c/6c87e1a47928
  - [net-next,v4,08/12] net: dsa: vsc73xx: Implement the tag_8021q VLAN operations
    https://git.kernel.org/netdev/net-next/c/e3386ec4ec90
  - [net-next,v4,09/12] net: dsa: Define max num of bridges in tag8021q implementation
    https://git.kernel.org/netdev/net-next/c/ce20fdd670ac
  - [net-next,v4,10/12] net: dsa: prepare 'dsa_tag_8021q_bridge_join' for standalone use
    https://git.kernel.org/netdev/net-next/c/85aabd1fe9d6
  - [net-next,v4,11/12] net: dsa: vsc73xx: Add bridge support
    https://git.kernel.org/netdev/net-next/c/6dfaaa276337
  - [net-next,v4,12/12] net: dsa: vsc73xx: start treating the BR_LEARNING flag
    https://git.kernel.org/netdev/net-next/c/259a7061c2f1

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Re: [PATCH net-next v4 00/12] net: dsa: vsc73xx: Implement VLAN operations

[Paweł Dembicki]

niedz., 14 lip 2024 o 00:36 Vladimir Oltean <olteanv@gmail.com> napisał(a):
>
> On Sat, Jul 13, 2024 at 11:16:06PM +0200, Pawel Dembicki wrote:
> > This patch series is a result of splitting a larger patch series [0],
> > where some parts was merged before.
>
> It is a good day for this driver. Thanks for your perseverence with this.

It's a small step for the kernel but a big one for me. I'm glad that
we managed to finalize this series of patches. I want to thank
everyone for their help and the many valuable lessons. Especially you,
Vladimir, for your immense patience and willingness to help.