Re: [PATCH v5 net-next 03/13] dt-bindings: net: add bindings for NETC blocks control

["Rob Herring (Arm)" <robh@kernel.org>]

On Thu, 24 Oct 2024 14:53:18 +0800, Wei Fang wrote:
> Add bindings for NXP NETC blocks control. Usually, NETC has 2 blocks of
> 64KB registers, integrated endpoint register block (IERB) and privileged
> register block (PRB). IERB is used for pre-boot initialization for all
> NETC devices, such as ENETC, Timer, EMDIO and so on. And PRB controls
> global reset and global error handling for NETC. Moreover, for the i.MX
> platform, there is also a NETCMIX block for link configuration, such as
> MII protocol, PCS protocol, etc.
> 
> Signed-off-by: Wei Fang <wei.fang@nxp.com>
> ---
> v2 changes:
> 1. Rephrase the commit message.
> 2. Change unevaluatedProperties to additionalProperties.
> 3. Remove the useless lables from examples.
> v3 changes:
> 1. Remove the items from clocks and clock-names, add maxItems to clocks
> and rename the clock.
> v4 changes:
> 1. Reorder the required properties.
> 2. Add assigned-clocks, assigned-clock-parents and assigned-clock-rates.
> v5 changes:
> 1. Remove assigned-clocks, assigned-clock-parents and assigned-clock-rates
> 2. Remove minItems from reg and reg-names
> 3. Rename the node in the examples to be more general
> ---
>  .../bindings/net/nxp,netc-blk-ctrl.yaml       | 104 ++++++++++++++++++
>  1 file changed, 104 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml
> 

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>