[PATCH net-next v2 00/14][pull request] Intel Wired LAN Driver Updates 2024-11-05 (ice, ixgbe, igc. igb, igbvf, e1000)

[PATCH net-next v2 00/14][pull request] Intel Wired LAN Driver Updates 2024-11-05 (ice, ixgbe, igc. igb, igbvf, e1000)

[Tony Nguyen]

For ice:

Mateusz refactors and adds additional SerDes configuration values to be
output.

Przemek refactors processing of DDP and adds support for a flag field in
the DDP's signature segment header.

Joe Damato adds support for persistent NAPI config.

Brett adjusts setting of Tx promiscuous based on unicast/multicast
setting.

Jake moves setting of pf->supported_rxdids to occur directly after DDP
load and changes a small struct to use stack memory.

Frederic Weisbecker adds WQ_UNBOUND flag to the workqueue.

For ixgbe:

Diomidis Spinellis removes a circular dependency.

For igc:

Vitaly removes an unneeded autoneg parameter.

For igb:

Johnny Park fixes a couple of typos.

For igbvf:

Wander Lairson Costa removes an unused spinlock.

For e1000:

Joe Damato adds RTNL lock to some calls where it is expected to be held.
---
v1: https://lore.kernel.org/netdev/20241105222351.3320587-1-anthony.l.nguyen@intel.com/
- Drop, previous, patch 1 while it's being discussed
- Move conditional OR operator up a line (now patch 4)

The following are changes since commit 31a1f8752f7df7e3d8122054fbef02a9a8bff38f:
  Merge branch 'phy-mediatek-reorg'
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue 100GbE

Brett Creeley (1):
  ice: only allow Tx promiscuous for multicast

Diomidis Spinellis (1):
  ixgbe: Break include dependency cycle

Frederic Weisbecker (1):
  ice: Unbind the workqueue

Jacob Keller (2):
  ice: initialize pf->supported_rxdids immediately after loading DDP
  ice: use stack variable for virtchnl_supported_rxdids

Joe Damato (2):
  ice: Add support for persistent NAPI config
  e1000: Hold RTNL when e1000_down can be called

Johnny Park (1):
  igb: Fix 2 typos in comments in igb_main.c

Mateusz Polchlopek (2):
  ice: rework of dump serdes equalizer values feature
  ice: extend dump serdes equalizer values feature

Przemek Kitszel (2):
  ice: refactor "last" segment of DDP pkg
  ice: support optional flags in signature segment header

Vitaly Lifshits (1):
  igc: remove autoneg parameter from igc_mac_info

Wander Lairson Costa (1):
  igbvf: remove unused spinlock

 drivers/net/ethernet/intel/e1000/e1000_main.c |  10 +-
 drivers/net/ethernet/intel/ice/ice.h          |   6 +-
 .../net/ethernet/intel/ice/ice_adminq_cmd.h   |  17 +
 drivers/net/ethernet/intel/ice/ice_base.c     |   3 +-
 drivers/net/ethernet/intel/ice/ice_ddp.c      | 302 +++++++++--------
 drivers/net/ethernet/intel/ice/ice_ddp.h      |   5 +-
 drivers/net/ethernet/intel/ice/ice_ethtool.c  | 110 +++---
 drivers/net/ethernet/intel/ice/ice_ethtool.h  |  39 ++-
 drivers/net/ethernet/intel/ice/ice_lib.c      |   6 +-
 drivers/net/ethernet/intel/ice/ice_main.c     |  33 +-
 drivers/net/ethernet/intel/ice/ice_virtchnl.c |  59 ++--
 drivers/net/ethernet/intel/igb/igb_main.c     |   4 +-
 drivers/net/ethernet/intel/igbvf/igbvf.h      |   3 -
 drivers/net/ethernet/intel/igbvf/netdev.c     |   3 -
 drivers/net/ethernet/intel/igc/igc_diag.c     |   3 +-
 drivers/net/ethernet/intel/igc/igc_ethtool.c  |  13 +-
 drivers/net/ethernet/intel/igc/igc_hw.h       |   1 -
 drivers/net/ethernet/intel/igc/igc_mac.c      | 316 +++++++++---------
 drivers/net/ethernet/intel/igc/igc_main.c     |   1 -
 drivers/net/ethernet/intel/igc/igc_phy.c      |  24 +-
 .../net/ethernet/intel/ixgbe/ixgbe_82598.c    |   1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |   1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h  |  16 +-
 .../net/ethernet/intel/ixgbe/ixgbe_sriov.c    |   1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h |  15 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c |   1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c |   1 +
 27 files changed, 513 insertions(+), 481 deletions(-)

-- 
2.42.0

[PATCH net-next v2 01/14] ice: rework of dump serdes equalizer values feature

[Tony Nguyen]

From: Mateusz Polchlopek <mateusz.polchlopek@intel.com>

Refactor function ice_get_tx_rx_equa() to iterate over new table of
params instead of multiple calls to ice_aq_get_phy_equalization().

Subsequent commit will extend that function by add more serdes equalizer
values to dump.

Shorten the fields of struct ice_serdes_equalization_to_ethtool for
readability purposes.

Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_ethtool.c | 93 ++++++--------------
 drivers/net/ethernet/intel/ice/ice_ethtool.h | 22 ++---
 2 files changed, 38 insertions(+), 77 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index 2924ac61300d..19e7a9d93928 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -693,75 +693,36 @@ static int ice_get_port_topology(struct ice_hw *hw, u8 lport,
 static int ice_get_tx_rx_equa(struct ice_hw *hw, u8 serdes_num,
 			      struct ice_serdes_equalization_to_ethtool *ptr)
 {
+	static const int tx = ICE_AQC_OP_CODE_TX_EQU;
+	static const int rx = ICE_AQC_OP_CODE_RX_EQU;
+	struct {
+		int data_in;
+		int opcode;
+		int *out;
+	} aq_params[] = {
+		{ ICE_AQC_TX_EQU_PRE1, tx, &ptr->tx_equ_pre1 },
+		{ ICE_AQC_TX_EQU_PRE3, tx, &ptr->tx_equ_pre3 },
+		{ ICE_AQC_TX_EQU_ATTEN, tx, &ptr->tx_equ_atten },
+		{ ICE_AQC_TX_EQU_POST1, tx, &ptr->tx_equ_post1 },
+		{ ICE_AQC_TX_EQU_PRE2, tx, &ptr->tx_equ_pre2 },
+		{ ICE_AQC_RX_EQU_PRE2, rx, &ptr->rx_equ_pre2 },
+		{ ICE_AQC_RX_EQU_PRE1, rx, &ptr->rx_equ_pre1 },
+		{ ICE_AQC_RX_EQU_POST1, rx, &ptr->rx_equ_post1 },
+		{ ICE_AQC_RX_EQU_BFLF, rx, &ptr->rx_equ_bflf },
+		{ ICE_AQC_RX_EQU_BFHF, rx, &ptr->rx_equ_bfhf },
+		{ ICE_AQC_RX_EQU_DRATE, rx, &ptr->rx_equ_drate },
+	};
 	int err;
 
-	err = ice_aq_get_phy_equalization(hw, ICE_AQC_TX_EQU_PRE1,
-					  ICE_AQC_OP_CODE_TX_EQU, serdes_num,
-					  &ptr->tx_equalization_pre1);
-	if (err)
-		return err;
-
-	err = ice_aq_get_phy_equalization(hw, ICE_AQC_TX_EQU_PRE3,
-					  ICE_AQC_OP_CODE_TX_EQU, serdes_num,
-					  &ptr->tx_equalization_pre3);
-	if (err)
-		return err;
-
-	err = ice_aq_get_phy_equalization(hw, ICE_AQC_TX_EQU_ATTEN,
-					  ICE_AQC_OP_CODE_TX_EQU, serdes_num,
-					  &ptr->tx_equalization_atten);
-	if (err)
-		return err;
-
-	err = ice_aq_get_phy_equalization(hw, ICE_AQC_TX_EQU_POST1,
-					  ICE_AQC_OP_CODE_TX_EQU, serdes_num,
-					  &ptr->tx_equalization_post1);
-	if (err)
-		return err;
-
-	err = ice_aq_get_phy_equalization(hw, ICE_AQC_TX_EQU_PRE2,
-					  ICE_AQC_OP_CODE_TX_EQU, serdes_num,
-					  &ptr->tx_equalization_pre2);
-	if (err)
-		return err;
-
-	err = ice_aq_get_phy_equalization(hw, ICE_AQC_RX_EQU_PRE2,
-					  ICE_AQC_OP_CODE_RX_EQU, serdes_num,
-					  &ptr->rx_equalization_pre2);
-	if (err)
-		return err;
-
-	err = ice_aq_get_phy_equalization(hw, ICE_AQC_RX_EQU_PRE1,
-					  ICE_AQC_OP_CODE_RX_EQU, serdes_num,
-					  &ptr->rx_equalization_pre1);
-	if (err)
-		return err;
-
-	err = ice_aq_get_phy_equalization(hw, ICE_AQC_RX_EQU_POST1,
-					  ICE_AQC_OP_CODE_RX_EQU, serdes_num,
-					  &ptr->rx_equalization_post1);
-	if (err)
-		return err;
-
-	err = ice_aq_get_phy_equalization(hw, ICE_AQC_RX_EQU_BFLF,
-					  ICE_AQC_OP_CODE_RX_EQU, serdes_num,
-					  &ptr->rx_equalization_bflf);
-	if (err)
-		return err;
-
-	err = ice_aq_get_phy_equalization(hw, ICE_AQC_RX_EQU_BFHF,
-					  ICE_AQC_OP_CODE_RX_EQU, serdes_num,
-					  &ptr->rx_equalization_bfhf);
-	if (err)
-		return err;
-
-	err = ice_aq_get_phy_equalization(hw, ICE_AQC_RX_EQU_DRATE,
-					  ICE_AQC_OP_CODE_RX_EQU, serdes_num,
-					  &ptr->rx_equalization_drate);
-	if (err)
-		return err;
+	for (int i = 0; i < ARRAY_SIZE(aq_params); i++) {
+		err = ice_aq_get_phy_equalization(hw, aq_params[i].data_in,
+						  aq_params[i].opcode,
+						  serdes_num, aq_params[i].out);
+		if (err)
+			break;
+	}
 
-	return 0;
+	return err;
 }
 
 /**
diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.h b/drivers/net/ethernet/intel/ice/ice_ethtool.h
index 9acccae38625..98eb9c51d687 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.h
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.h
@@ -10,17 +10,17 @@ struct ice_phy_type_to_ethtool {
 };
 
 struct ice_serdes_equalization_to_ethtool {
-	int rx_equalization_pre2;
-	int rx_equalization_pre1;
-	int rx_equalization_post1;
-	int rx_equalization_bflf;
-	int rx_equalization_bfhf;
-	int rx_equalization_drate;
-	int tx_equalization_pre1;
-	int tx_equalization_pre3;
-	int tx_equalization_atten;
-	int tx_equalization_post1;
-	int tx_equalization_pre2;
+	int rx_equ_pre2;
+	int rx_equ_pre1;
+	int rx_equ_post1;
+	int rx_equ_bflf;
+	int rx_equ_bfhf;
+	int rx_equ_drate;
+	int tx_equ_pre1;
+	int tx_equ_pre3;
+	int tx_equ_atten;
+	int tx_equ_post1;
+	int tx_equ_pre2;
 };
 
 struct ice_regdump_to_ethtool {
-- 
2.42.0

[PATCH net-next v2 02/14] ice: extend dump serdes equalizer values feature

[Tony Nguyen]

From: Mateusz Polchlopek <mateusz.polchlopek@intel.com>

Extend the work done in commit 70838938e89c ("ice: Implement driver
functionality to dump serdes equalizer values") by adding the new set of
Rx registers that can be read using command:
  $ ethtool -d interface_name

Rx equalization parameters are E810 PHY registers used by end user to
gather information about configuration and status to debug link and
connection issues in the field.

Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_adminq_cmd.h | 17 +++++++++++++++++
 drivers/net/ethernet/intel/ice/ice_ethtool.c    | 17 +++++++++++++++++
 drivers/net/ethernet/intel/ice/ice_ethtool.h    | 17 +++++++++++++++++
 3 files changed, 51 insertions(+)

diff --git a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
index 1f01f3501d6b..1489a8ceec51 100644
--- a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
@@ -1492,6 +1492,23 @@ struct ice_aqc_dnl_equa_param {
 #define ICE_AQC_RX_EQU_BFLF (0x13 << ICE_AQC_RX_EQU_SHIFT)
 #define ICE_AQC_RX_EQU_BFHF (0x14 << ICE_AQC_RX_EQU_SHIFT)
 #define ICE_AQC_RX_EQU_DRATE (0x15 << ICE_AQC_RX_EQU_SHIFT)
+#define ICE_AQC_RX_EQU_CTLE_GAINHF (0x20 << ICE_AQC_RX_EQU_SHIFT)
+#define ICE_AQC_RX_EQU_CTLE_GAINLF (0x21 << ICE_AQC_RX_EQU_SHIFT)
+#define ICE_AQC_RX_EQU_CTLE_GAINDC (0x22 << ICE_AQC_RX_EQU_SHIFT)
+#define ICE_AQC_RX_EQU_CTLE_BW (0x23 << ICE_AQC_RX_EQU_SHIFT)
+#define ICE_AQC_RX_EQU_DFE_GAIN (0x30 << ICE_AQC_RX_EQU_SHIFT)
+#define ICE_AQC_RX_EQU_DFE_GAIN2 (0x31 << ICE_AQC_RX_EQU_SHIFT)
+#define ICE_AQC_RX_EQU_DFE_2 (0x32 << ICE_AQC_RX_EQU_SHIFT)
+#define ICE_AQC_RX_EQU_DFE_3 (0x33 << ICE_AQC_RX_EQU_SHIFT)
+#define ICE_AQC_RX_EQU_DFE_4 (0x34 << ICE_AQC_RX_EQU_SHIFT)
+#define ICE_AQC_RX_EQU_DFE_5 (0x35 << ICE_AQC_RX_EQU_SHIFT)
+#define ICE_AQC_RX_EQU_DFE_6 (0x36 << ICE_AQC_RX_EQU_SHIFT)
+#define ICE_AQC_RX_EQU_DFE_7 (0x37 << ICE_AQC_RX_EQU_SHIFT)
+#define ICE_AQC_RX_EQU_DFE_8 (0x38 << ICE_AQC_RX_EQU_SHIFT)
+#define ICE_AQC_RX_EQU_DFE_9 (0x39 << ICE_AQC_RX_EQU_SHIFT)
+#define ICE_AQC_RX_EQU_DFE_10 (0x3A << ICE_AQC_RX_EQU_SHIFT)
+#define ICE_AQC_RX_EQU_DFE_11 (0x3B << ICE_AQC_RX_EQU_SHIFT)
+#define ICE_AQC_RX_EQU_DFE_12 (0x3C << ICE_AQC_RX_EQU_SHIFT)
 #define ICE_AQC_TX_EQU_PRE1 0x0
 #define ICE_AQC_TX_EQU_PRE3 0x3
 #define ICE_AQC_TX_EQU_ATTEN 0x4
diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index 19e7a9d93928..3072634bf049 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -711,6 +711,23 @@ static int ice_get_tx_rx_equa(struct ice_hw *hw, u8 serdes_num,
 		{ ICE_AQC_RX_EQU_BFLF, rx, &ptr->rx_equ_bflf },
 		{ ICE_AQC_RX_EQU_BFHF, rx, &ptr->rx_equ_bfhf },
 		{ ICE_AQC_RX_EQU_DRATE, rx, &ptr->rx_equ_drate },
+		{ ICE_AQC_RX_EQU_CTLE_GAINHF, rx, &ptr->rx_equ_ctle_gainhf },
+		{ ICE_AQC_RX_EQU_CTLE_GAINLF, rx, &ptr->rx_equ_ctle_gainlf },
+		{ ICE_AQC_RX_EQU_CTLE_GAINDC, rx, &ptr->rx_equ_ctle_gaindc },
+		{ ICE_AQC_RX_EQU_CTLE_BW, rx, &ptr->rx_equ_ctle_bw },
+		{ ICE_AQC_RX_EQU_DFE_GAIN, rx, &ptr->rx_equ_dfe_gain },
+		{ ICE_AQC_RX_EQU_DFE_GAIN2, rx, &ptr->rx_equ_dfe_gain_2 },
+		{ ICE_AQC_RX_EQU_DFE_2, rx, &ptr->rx_equ_dfe_2 },
+		{ ICE_AQC_RX_EQU_DFE_3, rx, &ptr->rx_equ_dfe_3 },
+		{ ICE_AQC_RX_EQU_DFE_4, rx, &ptr->rx_equ_dfe_4 },
+		{ ICE_AQC_RX_EQU_DFE_5, rx, &ptr->rx_equ_dfe_5 },
+		{ ICE_AQC_RX_EQU_DFE_6, rx, &ptr->rx_equ_dfe_6 },
+		{ ICE_AQC_RX_EQU_DFE_7, rx, &ptr->rx_equ_dfe_7 },
+		{ ICE_AQC_RX_EQU_DFE_8, rx, &ptr->rx_equ_dfe_8 },
+		{ ICE_AQC_RX_EQU_DFE_9, rx, &ptr->rx_equ_dfe_9 },
+		{ ICE_AQC_RX_EQU_DFE_10, rx, &ptr->rx_equ_dfe_10 },
+		{ ICE_AQC_RX_EQU_DFE_11, rx, &ptr->rx_equ_dfe_11 },
+		{ ICE_AQC_RX_EQU_DFE_12, rx, &ptr->rx_equ_dfe_12 },
 	};
 	int err;
 
diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.h b/drivers/net/ethernet/intel/ice/ice_ethtool.h
index 98eb9c51d687..8f2ad1c172c0 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.h
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.h
@@ -16,6 +16,23 @@ struct ice_serdes_equalization_to_ethtool {
 	int rx_equ_bflf;
 	int rx_equ_bfhf;
 	int rx_equ_drate;
+	int rx_equ_ctle_gainhf;
+	int rx_equ_ctle_gainlf;
+	int rx_equ_ctle_gaindc;
+	int rx_equ_ctle_bw;
+	int rx_equ_dfe_gain;
+	int rx_equ_dfe_gain_2;
+	int rx_equ_dfe_2;
+	int rx_equ_dfe_3;
+	int rx_equ_dfe_4;
+	int rx_equ_dfe_5;
+	int rx_equ_dfe_6;
+	int rx_equ_dfe_7;
+	int rx_equ_dfe_8;
+	int rx_equ_dfe_9;
+	int rx_equ_dfe_10;
+	int rx_equ_dfe_11;
+	int rx_equ_dfe_12;
 	int tx_equ_pre1;
 	int tx_equ_pre3;
 	int tx_equ_atten;
-- 
2.42.0

[PATCH net-next v2 03/14] ice: refactor "last" segment of DDP pkg

[Tony Nguyen]

From: Przemek Kitszel <przemyslaw.kitszel@intel.com>

Add ice_ddp_send_hunk() that buffers "sent FW hunk" calls to AQ in order
to mark the "last" one in more elegant way. Next commit will add even
more complicated "sent FW" flow, so it's better to untangle a bit before.

Note that metadata buffers were not skipped for NOT-@indicate_last
segments, this is fixed now.

Minor:
 + use ice_is_buffer_metadata() instead of open coding it in
   ice_dwnld_cfg_bufs();
 + ice_dwnld_cfg_bufs_no_lock() + dependencies were moved up a bit to have
   better git-diff, as this function was rewritten (in terms of git-blame)

CC: Paul Greenwalt <paul.greenwalt@intel.com>
CC: Dan Nowlin <dan.nowlin@intel.com>
CC: Ahmed Zaki <ahmed.zaki@intel.com>
CC: Simon Horman <horms@kernel.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_ddp.c | 288 ++++++++++++-----------
 1 file changed, 151 insertions(+), 137 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ddp.c b/drivers/net/ethernet/intel/ice/ice_ddp.c
index 272fd823a825..3e1173ef4b5c 100644
--- a/drivers/net/ethernet/intel/ice/ice_ddp.c
+++ b/drivers/net/ethernet/intel/ice/ice_ddp.c
@@ -1210,6 +1210,131 @@ ice_aq_download_pkg(struct ice_hw *hw, struct ice_buf_hdr *pkg_buf,
 	return status;
 }
 
+/**
+ * ice_is_buffer_metadata - determine if package buffer is a metadata buffer
+ * @buf: pointer to buffer header
+ * Return: whether given @buf is a metadata one.
+ */
+static bool ice_is_buffer_metadata(struct ice_buf_hdr *buf)
+{
+	return le32_to_cpu(buf->section_entry[0].type) & ICE_METADATA_BUF;
+}
+
+/**
+ * struct ice_ddp_send_ctx - sending context of current DDP segment
+ * @hw: pointer to the hardware struct
+ *
+ * Keeps current sending state (header, error) for the purpose of proper "last"
+ * bit setting in ice_aq_download_pkg(). Use via calls to ice_ddp_send_hunk().
+ */
+struct ice_ddp_send_ctx {
+	struct ice_hw *hw;
+/* private: only for ice_ddp_send_hunk() */
+	struct ice_buf_hdr *hdr;
+	int err;
+};
+
+static void ice_ddp_send_ctx_set_err(struct ice_ddp_send_ctx *ctx, int err)
+{
+	ctx->err = err;
+}
+
+/**
+ * ice_ddp_send_hunk - send one hunk of data to FW
+ * @ctx: current segment sending context
+ * @hunk: next hunk to send, size is always ICE_PKG_BUF_SIZE
+ *
+ * Send the next hunk of data to FW, retrying if needed.
+ *
+ * Notice: must be called once more with a NULL @hunk to finish up; such call
+ * will set up the "last" bit of an AQ request. After such call @ctx.hdr is
+ * cleared, @hw is still valid.
+ *
+ * Return: %ICE_DDP_PKG_SUCCESS if there were no problems; a sticky @err
+ *         otherwise.
+ */
+static enum ice_ddp_state ice_ddp_send_hunk(struct ice_ddp_send_ctx *ctx,
+					    struct ice_buf_hdr *hunk)
+{
+	struct ice_buf_hdr *prev_hunk = ctx->hdr;
+	struct ice_hw *hw = ctx->hw;
+	bool prev_was_last = !hunk;
+	enum ice_aq_err aq_err;
+	u32 offset, info;
+	int attempt, err;
+
+	if (ctx->err)
+		return ctx->err;
+
+	ctx->hdr = hunk;
+	if (!prev_hunk)
+		return ICE_DDP_PKG_SUCCESS; /* no problem so far */
+
+	for (attempt = 0; attempt < 5; attempt++) {
+		if (attempt)
+			msleep(20);
+
+		err = ice_aq_download_pkg(hw, prev_hunk, ICE_PKG_BUF_SIZE,
+					  prev_was_last, &offset, &info, NULL);
+
+		aq_err = hw->adminq.sq_last_status;
+		if (aq_err != ICE_AQ_RC_ENOSEC && aq_err != ICE_AQ_RC_EBADSIG)
+			break;
+	}
+
+	if (err) {
+		ice_debug(hw, ICE_DBG_PKG, "Pkg download failed: err %d off %d inf %d\n",
+			  err, offset, info);
+		ctx->err = ice_map_aq_err_to_ddp_state(aq_err);
+	} else if (attempt) {
+		dev_dbg(ice_hw_to_dev(hw),
+			"ice_aq_download_pkg number of retries: %d\n", attempt);
+	}
+
+	return ctx->err;
+}
+
+/**
+ * ice_dwnld_cfg_bufs_no_lock
+ * @ctx: context of the current buffers section to send
+ * @bufs: pointer to an array of buffers
+ * @start: buffer index of first buffer to download
+ * @count: the number of buffers to download
+ *
+ * Downloads package configuration buffers to the firmware. Metadata buffers
+ * are skipped, and the first metadata buffer found indicates that the rest
+ * of the buffers are all metadata buffers.
+ */
+static enum ice_ddp_state
+ice_dwnld_cfg_bufs_no_lock(struct ice_ddp_send_ctx *ctx, struct ice_buf *bufs,
+			   u32 start, u32 count)
+{
+	struct ice_buf_hdr *bh;
+	enum ice_ddp_state err;
+
+	if (!bufs || !count) {
+		ice_ddp_send_ctx_set_err(ctx, ICE_DDP_PKG_ERR);
+		return ICE_DDP_PKG_ERR;
+	}
+
+	bufs += start;
+
+	for (int i = 0; i < count; i++, bufs++) {
+		bh = (struct ice_buf_hdr *)bufs;
+		/* Metadata buffers should not be sent to FW,
+		 * their presence means "we are done here".
+		 */
+		if (ice_is_buffer_metadata(bh))
+			break;
+
+		err = ice_ddp_send_hunk(ctx, bh);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
 /**
  * ice_get_pkg_seg_by_idx
  * @pkg_hdr: pointer to the package header to be searched
@@ -1269,137 +1394,21 @@ ice_is_signing_seg_type_at_idx(struct ice_pkg_hdr *pkg_hdr, u32 idx,
 	return false;
 }
 
-/**
- * ice_is_buffer_metadata - determine if package buffer is a metadata buffer
- * @buf: pointer to buffer header
- */
-static bool ice_is_buffer_metadata(struct ice_buf_hdr *buf)
-{
-	if (le32_to_cpu(buf->section_entry[0].type) & ICE_METADATA_BUF)
-		return true;
-
-	return false;
-}
-
-/**
- * ice_is_last_download_buffer
- * @buf: pointer to current buffer header
- * @idx: index of the buffer in the current sequence
- * @count: the buffer count in the current sequence
- *
- * Note: this routine should only be called if the buffer is not the last buffer
- */
-static bool
-ice_is_last_download_buffer(struct ice_buf_hdr *buf, u32 idx, u32 count)
-{
-	struct ice_buf *next_buf;
-
-	if ((idx + 1) == count)
-		return true;
-
-	/* A set metadata flag in the next buffer will signal that the current
-	 * buffer will be the last buffer downloaded
-	 */
-	next_buf = ((struct ice_buf *)buf) + 1;
-
-	return ice_is_buffer_metadata((struct ice_buf_hdr *)next_buf);
-}
-
-/**
- * ice_dwnld_cfg_bufs_no_lock
- * @hw: pointer to the hardware structure
- * @bufs: pointer to an array of buffers
- * @start: buffer index of first buffer to download
- * @count: the number of buffers to download
- * @indicate_last: if true, then set last buffer flag on last buffer download
- *
- * Downloads package configuration buffers to the firmware. Metadata buffers
- * are skipped, and the first metadata buffer found indicates that the rest
- * of the buffers are all metadata buffers.
- */
-static enum ice_ddp_state
-ice_dwnld_cfg_bufs_no_lock(struct ice_hw *hw, struct ice_buf *bufs, u32 start,
-			   u32 count, bool indicate_last)
-{
-	enum ice_ddp_state state = ICE_DDP_PKG_SUCCESS;
-	struct ice_buf_hdr *bh;
-	enum ice_aq_err err;
-	u32 offset, info, i;
-
-	if (!bufs || !count)
-		return ICE_DDP_PKG_ERR;
-
-	/* If the first buffer's first section has its metadata bit set
-	 * then there are no buffers to be downloaded, and the operation is
-	 * considered a success.
-	 */
-	bh = (struct ice_buf_hdr *)(bufs + start);
-	if (le32_to_cpu(bh->section_entry[0].type) & ICE_METADATA_BUF)
-		return ICE_DDP_PKG_SUCCESS;
-
-	for (i = 0; i < count; i++) {
-		bool last = false;
-		int try_cnt = 0;
-		int status;
-
-		bh = (struct ice_buf_hdr *)(bufs + start + i);
-
-		if (indicate_last)
-			last = ice_is_last_download_buffer(bh, i, count);
-
-		while (1) {
-			status = ice_aq_download_pkg(hw, bh, ICE_PKG_BUF_SIZE,
-						     last, &offset, &info,
-						     NULL);
-			if (hw->adminq.sq_last_status != ICE_AQ_RC_ENOSEC &&
-			    hw->adminq.sq_last_status != ICE_AQ_RC_EBADSIG)
-				break;
-
-			try_cnt++;
-
-			if (try_cnt == 5)
-				break;
-
-			msleep(20);
-		}
-
-		if (try_cnt)
-			dev_dbg(ice_hw_to_dev(hw),
-				"ice_aq_download_pkg number of retries: %d\n",
-				try_cnt);
-
-		/* Save AQ status from download package */
-		if (status) {
-			ice_debug(hw, ICE_DBG_PKG, "Pkg download failed: err %d off %d inf %d\n",
-				  status, offset, info);
-			err = hw->adminq.sq_last_status;
-			state = ice_map_aq_err_to_ddp_state(err);
-			break;
-		}
-
-		if (last)
-			break;
-	}
-
-	return state;
-}
-
 /**
  * ice_download_pkg_sig_seg - download a signature segment
- * @hw: pointer to the hardware structure
+ * @ctx: context of the current buffers section to send
  * @seg: pointer to signature segment
  */
 static enum ice_ddp_state
-ice_download_pkg_sig_seg(struct ice_hw *hw, struct ice_sign_seg *seg)
+ice_download_pkg_sig_seg(struct ice_ddp_send_ctx *ctx, struct ice_sign_seg *seg)
 {
-	return  ice_dwnld_cfg_bufs_no_lock(hw, seg->buf_tbl.buf_array, 0,
-					   le32_to_cpu(seg->buf_tbl.buf_count),
-					   false);
+	return ice_dwnld_cfg_bufs_no_lock(ctx, seg->buf_tbl.buf_array, 0,
+					  le32_to_cpu(seg->buf_tbl.buf_count));
 }
 
 /**
  * ice_download_pkg_config_seg - download a config segment
- * @hw: pointer to the hardware structure
+ * @ctx: context of the current buffers section to send
  * @pkg_hdr: pointer to package header
  * @idx: segment index
  * @start: starting buffer
@@ -1408,8 +1417,9 @@ ice_download_pkg_sig_seg(struct ice_hw *hw, struct ice_sign_seg *seg)
  * Note: idx must reference a ICE segment
  */
 static enum ice_ddp_state
-ice_download_pkg_config_seg(struct ice_hw *hw, struct ice_pkg_hdr *pkg_hdr,
-			    u32 idx, u32 start, u32 count)
+ice_download_pkg_config_seg(struct ice_ddp_send_ctx *ctx,
+			    struct ice_pkg_hdr *pkg_hdr, u32 idx, u32 start,
+			    u32 count)
 {
 	struct ice_buf_table *bufs;
 	struct ice_seg *seg;
@@ -1425,21 +1435,20 @@ ice_download_pkg_config_seg(struct ice_hw *hw, struct ice_pkg_hdr *pkg_hdr,
 	if (start >= buf_count || start + count > buf_count)
 		return ICE_DDP_PKG_ERR;
 
-	return  ice_dwnld_cfg_bufs_no_lock(hw, bufs->buf_array, start, count,
-					   true);
+	return ice_dwnld_cfg_bufs_no_lock(ctx, bufs->buf_array, start, count);
 }
 
 /**
  * ice_dwnld_sign_and_cfg_segs - download a signing segment and config segment
- * @hw: pointer to the hardware structure
+ * @ctx: context of the current buffers section to send
  * @pkg_hdr: pointer to package header
  * @idx: segment index (must be a signature segment)
  *
  * Note: idx must reference a signature segment
  */
 static enum ice_ddp_state
-ice_dwnld_sign_and_cfg_segs(struct ice_hw *hw, struct ice_pkg_hdr *pkg_hdr,
-			    u32 idx)
+ice_dwnld_sign_and_cfg_segs(struct ice_ddp_send_ctx *ctx,
+			    struct ice_pkg_hdr *pkg_hdr, u32 idx)
 {
 	enum ice_ddp_state state;
 	struct ice_sign_seg *seg;
@@ -1450,21 +1459,20 @@ ice_dwnld_sign_and_cfg_segs(struct ice_hw *hw, struct ice_pkg_hdr *pkg_hdr,
 	seg = (struct ice_sign_seg *)ice_get_pkg_seg_by_idx(pkg_hdr, idx);
 	if (!seg) {
 		state = ICE_DDP_PKG_ERR;
-		goto exit;
+		ice_ddp_send_ctx_set_err(ctx, state);
+		return state;
 	}
 
 	count = le32_to_cpu(seg->signed_buf_count);
-	state = ice_download_pkg_sig_seg(hw, seg);
+	state = ice_download_pkg_sig_seg(ctx, seg);
 	if (state || !count)
-		goto exit;
+		return state;
 
 	conf_idx = le32_to_cpu(seg->signed_seg_idx);
 	start = le32_to_cpu(seg->signed_buf_start);
 
-	state = ice_download_pkg_config_seg(hw, pkg_hdr, conf_idx, start,
+	state = ice_download_pkg_config_seg(ctx, pkg_hdr, conf_idx, start,
 					    count);
-
-exit:
 	return state;
 }
 
@@ -1519,6 +1527,7 @@ ice_download_pkg_with_sig_seg(struct ice_hw *hw, struct ice_pkg_hdr *pkg_hdr)
 {
 	enum ice_aq_err aq_err = hw->adminq.sq_last_status;
 	enum ice_ddp_state state = ICE_DDP_PKG_ERR;
+	struct ice_ddp_send_ctx ctx = { .hw = hw };
 	int status;
 	u32 i;
 
@@ -1539,7 +1548,9 @@ ice_download_pkg_with_sig_seg(struct ice_hw *hw, struct ice_pkg_hdr *pkg_hdr)
 						    hw->pkg_sign_type))
 			continue;
 
-		state = ice_dwnld_sign_and_cfg_segs(hw, pkg_hdr, i);
+		ice_dwnld_sign_and_cfg_segs(&ctx, pkg_hdr, i);
+		/* finish up by sending last hunk with "last" flag set */
+		state = ice_ddp_send_hunk(&ctx, NULL);
 		if (state)
 			break;
 	}
@@ -1564,6 +1575,7 @@ ice_download_pkg_with_sig_seg(struct ice_hw *hw, struct ice_pkg_hdr *pkg_hdr)
 static enum ice_ddp_state
 ice_dwnld_cfg_bufs(struct ice_hw *hw, struct ice_buf *bufs, u32 count)
 {
+	struct ice_ddp_send_ctx ctx = { .hw = hw };
 	enum ice_ddp_state state;
 	struct ice_buf_hdr *bh;
 	int status;
@@ -1576,7 +1588,7 @@ ice_dwnld_cfg_bufs(struct ice_hw *hw, struct ice_buf *bufs, u32 count)
 	 * considered a success.
 	 */
 	bh = (struct ice_buf_hdr *)bufs;
-	if (le32_to_cpu(bh->section_entry[0].type) & ICE_METADATA_BUF)
+	if (ice_is_buffer_metadata(bh))
 		return ICE_DDP_PKG_SUCCESS;
 
 	status = ice_acquire_global_cfg_lock(hw, ICE_RES_WRITE);
@@ -1586,7 +1598,9 @@ ice_dwnld_cfg_bufs(struct ice_hw *hw, struct ice_buf *bufs, u32 count)
 		return ice_map_aq_err_to_ddp_state(hw->adminq.sq_last_status);
 	}
 
-	state = ice_dwnld_cfg_bufs_no_lock(hw, bufs, 0, count, true);
+	ice_dwnld_cfg_bufs_no_lock(&ctx, bufs, 0, count);
+	/* finish up by sending last hunk with "last" flag set */
+	state = ice_ddp_send_hunk(&ctx, NULL);
 	if (!state)
 		state = ice_post_dwnld_pkg_actions(hw);
 
-- 
2.42.0

[PATCH net-next v2 04/14] ice: support optional flags in signature segment header

[Tony Nguyen]

From: Przemek Kitszel <przemyslaw.kitszel@intel.com>

An optional flag field has been added to the signature segment header.
The field contains two flags, a "valid" bit, and a "last segment" bit
that indicates whether the segment is the last segment that will be
sent to firmware.

If the flag field's valid bit is NOT set, then as was done before,
assume that this is the last segment being downloaded.

However, if the flag field's valid bit IS set, then use the last segment
flag to determine if this segment is the last segment to download.

Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Co-developed-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_ddp.c | 22 ++++++++++++++++------
 drivers/net/ethernet/intel/ice/ice_ddp.h |  5 ++++-
 2 files changed, 20 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ddp.c b/drivers/net/ethernet/intel/ice/ice_ddp.c
index 3e1173ef4b5c..03988be03729 100644
--- a/drivers/net/ethernet/intel/ice/ice_ddp.c
+++ b/drivers/net/ethernet/intel/ice/ice_ddp.c
@@ -1438,6 +1438,12 @@ ice_download_pkg_config_seg(struct ice_ddp_send_ctx *ctx,
 	return ice_dwnld_cfg_bufs_no_lock(ctx, bufs->buf_array, start, count);
 }
 
+static bool ice_is_last_sign_seg(u32 flags)
+{
+	return !(flags & ICE_SIGN_SEG_FLAGS_VALID) || /* behavior prior to valid */
+	       (flags & ICE_SIGN_SEG_FLAGS_LAST);
+}
+
 /**
  * ice_dwnld_sign_and_cfg_segs - download a signing segment and config segment
  * @ctx: context of the current buffers section to send
@@ -1450,11 +1456,9 @@ static enum ice_ddp_state
 ice_dwnld_sign_and_cfg_segs(struct ice_ddp_send_ctx *ctx,
 			    struct ice_pkg_hdr *pkg_hdr, u32 idx)
 {
+	u32 conf_idx, start, count, flags;
 	enum ice_ddp_state state;
 	struct ice_sign_seg *seg;
-	u32 conf_idx;
-	u32 start;
-	u32 count;
 
 	seg = (struct ice_sign_seg *)ice_get_pkg_seg_by_idx(pkg_hdr, idx);
 	if (!seg) {
@@ -1473,6 +1477,14 @@ ice_dwnld_sign_and_cfg_segs(struct ice_ddp_send_ctx *ctx,
 
 	state = ice_download_pkg_config_seg(ctx, pkg_hdr, conf_idx, start,
 					    count);
+
+	/* finish up by sending last hunk with "last" flag set if requested by
+	 * DDP content
+	 */
+	flags = le32_to_cpu(seg->flags);
+	if (ice_is_last_sign_seg(flags))
+		state = ice_ddp_send_hunk(ctx, NULL);
+
 	return state;
 }
 
@@ -1548,9 +1560,7 @@ ice_download_pkg_with_sig_seg(struct ice_hw *hw, struct ice_pkg_hdr *pkg_hdr)
 						    hw->pkg_sign_type))
 			continue;
 
-		ice_dwnld_sign_and_cfg_segs(&ctx, pkg_hdr, i);
-		/* finish up by sending last hunk with "last" flag set */
-		state = ice_ddp_send_hunk(&ctx, NULL);
+		state = ice_dwnld_sign_and_cfg_segs(&ctx, pkg_hdr, i);
 		if (state)
 			break;
 	}
diff --git a/drivers/net/ethernet/intel/ice/ice_ddp.h b/drivers/net/ethernet/intel/ice/ice_ddp.h
index 79551da2a4b0..8a2d57fc5dae 100644
--- a/drivers/net/ethernet/intel/ice/ice_ddp.h
+++ b/drivers/net/ethernet/intel/ice/ice_ddp.h
@@ -181,7 +181,10 @@ struct ice_sign_seg {
 	__le32 signed_seg_idx;
 	__le32 signed_buf_start;
 	__le32 signed_buf_count;
-#define ICE_SIGN_SEG_RESERVED_COUNT	44
+#define ICE_SIGN_SEG_FLAGS_VALID	0x80000000
+#define ICE_SIGN_SEG_FLAGS_LAST		0x00000001
+	__le32 flags;
+#define ICE_SIGN_SEG_RESERVED_COUNT	40
 	u8 reserved[ICE_SIGN_SEG_RESERVED_COUNT];
 	struct ice_buf_table buf_tbl;
 };
-- 
2.42.0

[PATCH net-next v2 05/14] ice: Add support for persistent NAPI config

[Tony Nguyen]

From: Joe Damato <jdamato@fastly.com>

Use netif_napi_add_config to assign persistent per-NAPI config when
initializing NAPIs. This preserves NAPI config settings when queue
counts are adjusted.

Tested with an E810-2CQDA2 NIC.

Begin by setting the queue count to 4:

$ sudo ethtool -L eth4 combined 4

Check the queue settings:

$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
                         --dump napi-get --json='{"ifindex": 4}'
[{'defer-hard-irqs': 0,
  'gro-flush-timeout': 0,
  'id': 8452,
  'ifindex': 4,
  'irq': 2782},
 {'defer-hard-irqs': 0,
  'gro-flush-timeout': 0,
  'id': 8451,
  'ifindex': 4,
  'irq': 2781},
 {'defer-hard-irqs': 0,
  'gro-flush-timeout': 0,
  'id': 8450,
  'ifindex': 4,
  'irq': 2780},
 {'defer-hard-irqs': 0,
  'gro-flush-timeout': 0,
  'id': 8449,
  'ifindex': 4,
  'irq': 2779}]

Now, set the queue with NAPI ID 8451 to have a gro-flush-timeout of
1111:

$ sudo ./tools/net/ynl/cli.py \
            --spec Documentation/netlink/specs/netdev.yaml \
            --do napi-set --json='{"id": 8451, "gro-flush-timeout": 1111}'
None

Check that worked:

$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
                         --dump napi-get --json='{"ifindex": 4}'
[{'defer-hard-irqs': 0,
  'gro-flush-timeout': 0,
  'id': 8452,
  'ifindex': 4,
  'irq': 2782},
 {'defer-hard-irqs': 0,
  'gro-flush-timeout': 1111,
  'id': 8451,
  'ifindex': 4,
  'irq': 2781},
 {'defer-hard-irqs': 0,
  'gro-flush-timeout': 0,
  'id': 8450,
  'ifindex': 4,
  'irq': 2780},
 {'defer-hard-irqs': 0,
  'gro-flush-timeout': 0,
  'id': 8449,
  'ifindex': 4,
  'irq': 2779}]

Now reduce the queue count to 2, which would destroy the queue with NAPI
ID 8451:

$ sudo ethtool -L eth4 combined 2

Check the queue settings, noting that NAPI ID 8451 is gone:

$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
                         --dump napi-get --json='{"ifindex": 4}'
[{'defer-hard-irqs': 0,
  'gro-flush-timeout': 0,
  'id': 8450,
  'ifindex': 4,
  'irq': 2780},
 {'defer-hard-irqs': 0,
  'gro-flush-timeout': 0,
  'id': 8449,
  'ifindex': 4,
  'irq': 2779}]

Now, increase the number of queues back to 4:

$ sudo ethtool -L eth4 combined 4

Dump the settings, expecting to see the same NAPI IDs as above and for
NAPI ID 8451 to have its gro-flush-timeout set to 1111:

$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
                         --dump napi-get --json='{"ifindex": 4}'
[{'defer-hard-irqs': 0,
  'gro-flush-timeout': 0,
  'id': 8452,
  'ifindex': 4,
  'irq': 2782},
 {'defer-hard-irqs': 0,
  'gro-flush-timeout': 1111,
  'id': 8451,
  'ifindex': 4,
  'irq': 2781},
 {'defer-hard-irqs': 0,
  'gro-flush-timeout': 0,
  'id': 8450,
  'ifindex': 4,
  'irq': 2780},
 {'defer-hard-irqs': 0,
  'gro-flush-timeout': 0,
  'id': 8449,
  'ifindex': 4,
  'irq': 2779}]

Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_base.c | 3 ++-
 drivers/net/ethernet/intel/ice/ice_lib.c  | 6 ++++--
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_base.c b/drivers/net/ethernet/intel/ice/ice_base.c
index 3a8e156d7d86..82a9cd4ec7ae 100644
--- a/drivers/net/ethernet/intel/ice/ice_base.c
+++ b/drivers/net/ethernet/intel/ice/ice_base.c
@@ -156,7 +156,8 @@ static int ice_vsi_alloc_q_vector(struct ice_vsi *vsi, u16 v_idx)
 	 * handler here (i.e. resume, reset/rebuild, etc.)
 	 */
 	if (vsi->netdev)
-		netif_napi_add(vsi->netdev, &q_vector->napi, ice_napi_poll);
+		netif_napi_add_config(vsi->netdev, &q_vector->napi,
+				      ice_napi_poll, v_idx);
 
 out:
 	/* tie q_vector and VSI together */
diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c
index d4e74f96a8ad..a7d45a8ce7ac 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_lib.c
@@ -2777,8 +2777,10 @@ void ice_napi_add(struct ice_vsi *vsi)
 		return;
 
 	ice_for_each_q_vector(vsi, v_idx)
-		netif_napi_add(vsi->netdev, &vsi->q_vectors[v_idx]->napi,
-			       ice_napi_poll);
+		netif_napi_add_config(vsi->netdev,
+				      &vsi->q_vectors[v_idx]->napi,
+				      ice_napi_poll,
+				      v_idx);
 }
 
 /**
-- 
2.42.0

[PATCH net-next v2 06/14] ice: only allow Tx promiscuous for multicast

[Tony Nguyen]

From: Brett Creeley <brett.creeley@intel.com>

Currently when any VF is trusted and true promiscuous mode is enabled on
the PF, the VF will receive all unicast traffic directed to the device's
internal switch. This includes traffic external to the NIC and also from
other VSI (i.e. VFs). This does not match the expected behavior as
unicast traffic should only be visible from external sources in this
case. Disable the Tx promiscuous mode bits for unicast promiscuous mode.

Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice.h          |  6 ++---
 drivers/net/ethernet/intel/ice/ice_virtchnl.c | 23 ++++++++++++++-----
 2 files changed, 19 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
index 680a81961ba1..2f5d6f974185 100644
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@ -181,11 +181,9 @@
 #define ice_for_each_chnl_tc(i)	\
 	for ((i) = ICE_CHNL_START_TC; (i) < ICE_CHNL_MAX_TC; (i)++)
 
-#define ICE_UCAST_PROMISC_BITS (ICE_PROMISC_UCAST_TX | ICE_PROMISC_UCAST_RX)
+#define ICE_UCAST_PROMISC_BITS ICE_PROMISC_UCAST_RX
 
-#define ICE_UCAST_VLAN_PROMISC_BITS (ICE_PROMISC_UCAST_TX | \
-				     ICE_PROMISC_UCAST_RX | \
-				     ICE_PROMISC_VLAN_TX  | \
+#define ICE_UCAST_VLAN_PROMISC_BITS (ICE_PROMISC_UCAST_RX | \
 				     ICE_PROMISC_VLAN_RX)
 
 #define ICE_MCAST_PROMISC_BITS (ICE_PROMISC_MCAST_TX | ICE_PROMISC_MCAST_RX)
diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl.c b/drivers/net/ethernet/intel/ice/ice_virtchnl.c
index aa2080747714..cc070c467fdd 100644
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl.c
@@ -2554,17 +2554,27 @@ static bool ice_is_vlan_promisc_allowed(struct ice_vf *vf)
 
 /**
  * ice_vf_ena_vlan_promisc - Enable Tx/Rx VLAN promiscuous for the VLAN
+ * @vf: VF to enable VLAN promisc on
  * @vsi: VF's VSI used to enable VLAN promiscuous mode
  * @vlan: VLAN used to enable VLAN promiscuous
  *
  * This function should only be called if VLAN promiscuous mode is allowed,
  * which can be determined via ice_is_vlan_promisc_allowed().
  */
-static int ice_vf_ena_vlan_promisc(struct ice_vsi *vsi, struct ice_vlan *vlan)
+static int ice_vf_ena_vlan_promisc(struct ice_vf *vf, struct ice_vsi *vsi,
+				   struct ice_vlan *vlan)
 {
-	u8 promisc_m = ICE_PROMISC_VLAN_TX | ICE_PROMISC_VLAN_RX;
+	u8 promisc_m = 0;
 	int status;
 
+	if (test_bit(ICE_VF_STATE_UC_PROMISC, vf->vf_states))
+		promisc_m |= ICE_UCAST_VLAN_PROMISC_BITS;
+	if (test_bit(ICE_VF_STATE_MC_PROMISC, vf->vf_states))
+		promisc_m |= ICE_MCAST_VLAN_PROMISC_BITS;
+
+	if (!promisc_m)
+		return 0;
+
 	status = ice_fltr_set_vsi_promisc(&vsi->back->hw, vsi->idx, promisc_m,
 					  vlan->vid);
 	if (status && status != -EEXIST)
@@ -2583,7 +2593,7 @@ static int ice_vf_ena_vlan_promisc(struct ice_vsi *vsi, struct ice_vlan *vlan)
  */
 static int ice_vf_dis_vlan_promisc(struct ice_vsi *vsi, struct ice_vlan *vlan)
 {
-	u8 promisc_m = ICE_PROMISC_VLAN_TX | ICE_PROMISC_VLAN_RX;
+	u8 promisc_m = ICE_UCAST_VLAN_PROMISC_BITS | ICE_MCAST_VLAN_PROMISC_BITS;
 	int status;
 
 	status = ice_fltr_clear_vsi_promisc(&vsi->back->hw, vsi->idx, promisc_m,
@@ -2738,7 +2748,7 @@ static int ice_vc_process_vlan_msg(struct ice_vf *vf, u8 *msg, bool add_v)
 					goto error_param;
 				}
 			} else if (vlan_promisc) {
-				status = ice_vf_ena_vlan_promisc(vsi, &vlan);
+				status = ice_vf_ena_vlan_promisc(vf, vsi, &vlan);
 				if (status) {
 					v_ret = VIRTCHNL_STATUS_ERR_PARAM;
 					dev_err(dev, "Enable Unicast/multicast promiscuous mode on VLAN ID:%d failed error-%d\n",
@@ -3575,7 +3585,7 @@ ice_vc_add_vlans(struct ice_vf *vf, struct ice_vsi *vsi,
 				return err;
 
 			if (vlan_promisc) {
-				err = ice_vf_ena_vlan_promisc(vsi, &vlan);
+				err = ice_vf_ena_vlan_promisc(vf, vsi, &vlan);
 				if (err)
 					return err;
 			}
@@ -3603,7 +3613,8 @@ ice_vc_add_vlans(struct ice_vf *vf, struct ice_vsi *vsi,
 			 */
 			if (!ice_is_dvm_ena(&vsi->back->hw)) {
 				if (vlan_promisc) {
-					err = ice_vf_ena_vlan_promisc(vsi, &vlan);
+					err = ice_vf_ena_vlan_promisc(vf, vsi,
+								      &vlan);
 					if (err)
 						return err;
 				}
-- 
2.42.0

[PATCH net-next v2 07/14] ice: initialize pf->supported_rxdids immediately after loading DDP

[Tony Nguyen]

From: Jacob Keller <jacob.e.keller@intel.com>

The pf->supported_rxdids field is used to populate the list of valid RXDIDs
that a VF may use when negotiating VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC.

The set of supported RXDIDs is dependent on the DDP, and can be read from
the GLXFLXP_RXDID_FLAGS register. The PF needs to send this list to the
VF upon receiving the VIRTCHNL_OP_GET_SUPPORTED_RXDIDs. It also needs to
use this list to validate the requested descriptor ID from the VF when
programming the Rx queues.

A future update to support VF live migration will also want to validate
that the target VF can support the same descriptor ID when migrating.

Currently, pf->supported_rxdids is initialized inside the
ice_vc_query_rxdid() function. This means that it is only ever initialized
if at least one VF actually tries to negotiate
VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC. It is also unnecessarily re-initialized
every time the VF loads and requests the descriptor list. This worked
before because the PF only checks pf->suppported_rxdids when programming
the Rx queue if the VF actually negotiates the
VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC feature.

This will be problematic for VF live migration. We need the list of
supported Rx descriptor IDs when migrating. It is possible that no VF on
the target PF has ever actually issued a VIRTCHNL_OP_GET_SUPPORTED_RXDIDs.

Refactor the driver to initialize pf->supported_rxdids during driver
initialization after the DDP is loaded. This is simpler, avoids unnecessary
duplicate work, and avoids issues with the live migration process.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_main.c     | 31 +++++++++++++++++++
 drivers/net/ethernet/intel/ice/ice_virtchnl.c | 20 ++----------
 2 files changed, 33 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index a6f586f9bfd1..f9301493e92d 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -4554,6 +4554,34 @@ ice_init_tx_topology(struct ice_hw *hw, const struct firmware *firmware)
 	return 0;
 }
 
+/**
+ * ice_init_supported_rxdids - Initialize supported Rx descriptor IDs
+ * @hw: pointer to the hardware structure
+ * @pf: pointer to pf structure
+ *
+ * The pf->supported_rxdids bitmap is used to indicate to VFs which descriptor
+ * formats the PF hardware supports. The exact list of supported RXDIDs
+ * depends on the loaded DDP package. The IDs can be determined by reading the
+ * GLFLXP_RXDID_FLAGS register after the DDP package is loaded.
+ *
+ * Note that the legacy 32-byte RXDID 0 is always supported but is not listed
+ * in the DDP package. The 16-byte legacy descriptor is never supported by
+ * VFs.
+ */
+static void ice_init_supported_rxdids(struct ice_hw *hw, struct ice_pf *pf)
+{
+	pf->supported_rxdids = BIT(ICE_RXDID_LEGACY_1);
+
+	for (int i = ICE_RXDID_FLEX_NIC; i < ICE_FLEX_DESC_RXDID_MAX_NUM; i++) {
+		u32 regval;
+
+		regval = rd32(hw, GLFLXP_RXDID_FLAGS(i, 0));
+		if ((regval >> GLFLXP_RXDID_FLAGS_FLEXIFLAG_4N_S)
+			& GLFLXP_RXDID_FLAGS_FLEXIFLAG_4N_M)
+			pf->supported_rxdids |= BIT(i);
+	}
+}
+
 /**
  * ice_init_ddp_config - DDP related configuration
  * @hw: pointer to the hardware structure
@@ -4588,6 +4616,9 @@ static int ice_init_ddp_config(struct ice_hw *hw, struct ice_pf *pf)
 	ice_load_pkg(firmware, pf);
 	release_firmware(firmware);
 
+	/* Initialize the supported Rx descriptor IDs after loading DDP */
+	ice_init_supported_rxdids(hw, pf);
+
 	return 0;
 }
 
diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl.c b/drivers/net/ethernet/intel/ice/ice_virtchnl.c
index cc070c467fdd..bc9fadaccad0 100644
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl.c
@@ -3032,11 +3032,9 @@ static int ice_vc_query_rxdid(struct ice_vf *vf)
 {
 	enum virtchnl_status_code v_ret = VIRTCHNL_STATUS_SUCCESS;
 	struct virtchnl_supported_rxdids *rxdid = NULL;
-	struct ice_hw *hw = &vf->pf->hw;
 	struct ice_pf *pf = vf->pf;
 	int len = 0;
-	int ret, i;
-	u32 regval;
+	int ret;
 
 	if (!test_bit(ICE_VF_STATE_ACTIVE, vf->vf_states)) {
 		v_ret = VIRTCHNL_STATUS_ERR_PARAM;
@@ -3056,21 +3054,7 @@ static int ice_vc_query_rxdid(struct ice_vf *vf)
 		goto err;
 	}
 
-	/* RXDIDs supported by DDP package can be read from the register
-	 * to get the supported RXDID bitmap. But the legacy 32byte RXDID
-	 * is not listed in DDP package, add it in the bitmap manually.
-	 * Legacy 16byte descriptor is not supported.
-	 */
-	rxdid->supported_rxdids |= BIT(ICE_RXDID_LEGACY_1);
-
-	for (i = ICE_RXDID_FLEX_NIC; i < ICE_FLEX_DESC_RXDID_MAX_NUM; i++) {
-		regval = rd32(hw, GLFLXP_RXDID_FLAGS(i, 0));
-		if ((regval >> GLFLXP_RXDID_FLAGS_FLEXIFLAG_4N_S)
-			& GLFLXP_RXDID_FLAGS_FLEXIFLAG_4N_M)
-			rxdid->supported_rxdids |= BIT(i);
-	}
-
-	pf->supported_rxdids = rxdid->supported_rxdids;
+	rxdid->supported_rxdids = pf->supported_rxdids;
 
 err:
 	ret = ice_vc_send_msg_to_vf(vf, VIRTCHNL_OP_GET_SUPPORTED_RXDIDS,
-- 
2.42.0

[PATCH net-next v2 08/14] ice: use stack variable for virtchnl_supported_rxdids

[Tony Nguyen]

From: Jacob Keller <jacob.e.keller@intel.com>

The ice_vc_query_rxdid() function allocates memory to store the
virtchnl_supported_rxdids structure used to communicate the bitmap of
supported RXDIDs to a VF.

This structure is only 8 bytes in size. The function must hold the
allocated length on the stack as well as the pointer to the structure which
itself is 8 bytes. Allocating this storage on the heap adds unnecessary
overhead including a potential error path that must be handled in case
kzalloc fails. Because this structure is so small, we're not saving stack
space. Additionally, because we must ensure that we free the allocated
memory, the return value from ice_vc_send_msg_to_vf() must also be saved in
the stack ret variable. Depending on compiler optimization, this means
allocating the 8-byte structure is requiring up to 16-bytes of stack
memory!

Simplify this function to keep the rxdid variable on the stack, saving
memory and removing a potential failure exit path from this function.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_virtchnl.c | 20 ++++---------------
 1 file changed, 4 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl.c b/drivers/net/ethernet/intel/ice/ice_virtchnl.c
index bc9fadaccad0..f445e33b2028 100644
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl.c
@@ -3031,10 +3031,8 @@ static int ice_vc_set_rss_hena(struct ice_vf *vf, u8 *msg)
 static int ice_vc_query_rxdid(struct ice_vf *vf)
 {
 	enum virtchnl_status_code v_ret = VIRTCHNL_STATUS_SUCCESS;
-	struct virtchnl_supported_rxdids *rxdid = NULL;
+	struct virtchnl_supported_rxdids rxdid = {};
 	struct ice_pf *pf = vf->pf;
-	int len = 0;
-	int ret;
 
 	if (!test_bit(ICE_VF_STATE_ACTIVE, vf->vf_states)) {
 		v_ret = VIRTCHNL_STATUS_ERR_PARAM;
@@ -3046,21 +3044,11 @@ static int ice_vc_query_rxdid(struct ice_vf *vf)
 		goto err;
 	}
 
-	len = sizeof(struct virtchnl_supported_rxdids);
-	rxdid = kzalloc(len, GFP_KERNEL);
-	if (!rxdid) {
-		v_ret = VIRTCHNL_STATUS_ERR_NO_MEMORY;
-		len = 0;
-		goto err;
-	}
-
-	rxdid->supported_rxdids = pf->supported_rxdids;
+	rxdid.supported_rxdids = pf->supported_rxdids;
 
 err:
-	ret = ice_vc_send_msg_to_vf(vf, VIRTCHNL_OP_GET_SUPPORTED_RXDIDS,
-				    v_ret, (u8 *)rxdid, len);
-	kfree(rxdid);
-	return ret;
+	return ice_vc_send_msg_to_vf(vf, VIRTCHNL_OP_GET_SUPPORTED_RXDIDS,
+				     v_ret, (u8 *)&rxdid, sizeof(rxdid));
 }
 
 /**
-- 
2.42.0

[PATCH net-next v2 09/14] ice: Unbind the workqueue

[Tony Nguyen]

From: Frederic Weisbecker <frederic@kernel.org>

The ice workqueue doesn't seem to rely on any CPU locality and should
therefore be able to run on any CPU. In practice this is already
happening through the unbound ice_service_timer that may fire anywhere
and queue the workqueue accordingly to any CPU.

Make this official so that the ice workqueue is only ever queued to
housekeeping CPUs on nohz_full.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index f9301493e92d..cc8d2d6e2b4d 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -5931,7 +5931,7 @@ static int __init ice_module_init(void)
 
 	ice_adv_lnk_speed_maps_init();
 
-	ice_wq = alloc_workqueue("%s", 0, 0, KBUILD_MODNAME);
+	ice_wq = alloc_workqueue("%s", WQ_UNBOUND, 0, KBUILD_MODNAME);
 	if (!ice_wq) {
 		pr_err("Failed to create workqueue\n");
 		return status;
-- 
2.42.0

[PATCH net-next v2 10/14] ixgbe: Break include dependency cycle

[Tony Nguyen]

From: Diomidis Spinellis <dds@aueb.gr>

Header ixgbe_type.h includes ixgbe_mbx.h.  Also, header
ixgbe_mbx.h included ixgbe_type.h, thus introducing a circular
dependency.

- Remove ixgbe_mbx.h inclusion from ixgbe_type.h.

- ixgbe_mbx.h requires the definition of struct ixgbe_mbx_operations
  so move its definition there. While at it, add missing argument
  identifier names.

- Add required forward structure declarations.

- Include ixgbe_mbx.h in the .c files that need it, for the
  following reasons:

  ixgbe_sriov.c uses ixgbe_check_for_msg
  ixgbe_main.c uses ixgbe_init_mbx_params_pf
  ixgbe_82599.c uses mbx_ops_generic
  ixgbe_x540.c uses mbx_ops_generic
  ixgbe_x550.c uses mbx_ops_generic

Signed-off-by: Diomidis Spinellis <dds@aueb.gr>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c |  1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c  |  1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h   | 16 +++++++++++++++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c |  1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h  | 15 ++-------------
 drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c  |  1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c  |  1 +
 7 files changed, 22 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index 283a23150a4d..4aaaea3b5f8f 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -6,6 +6,7 @@
 #include <linux/sched.h>
 
 #include "ixgbe.h"
+#include "ixgbe_mbx.h"
 #include "ixgbe_phy.h"
 
 #define IXGBE_82598_MAX_TX_QUEUES 32
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 8b8404d8c946..c229a26fbbb7 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -43,6 +43,7 @@
 #include "ixgbe.h"
 #include "ixgbe_common.h"
 #include "ixgbe_dcb_82599.h"
+#include "ixgbe_mbx.h"
 #include "ixgbe_phy.h"
 #include "ixgbe_sriov.h"
 #include "ixgbe_model.h"
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h
index bd205306934b..bf65e82b4c61 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h
@@ -4,7 +4,7 @@
 #ifndef _IXGBE_MBX_H_
 #define _IXGBE_MBX_H_
 
-#include "ixgbe_type.h"
+#include <linux/types.h>
 
 #define IXGBE_VFMAILBOX_SIZE        16 /* 16 32 bit words - 64 bytes */
 
@@ -96,6 +96,8 @@ enum ixgbe_pfvf_api_rev {
 #define IXGBE_VF_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */
 #define IXGBE_VF_MBX_INIT_DELAY   500  /* microseconds between retries */
 
+struct ixgbe_hw;
+
 int ixgbe_read_mbx(struct ixgbe_hw *, u32 *, u16, u16);
 int ixgbe_write_mbx(struct ixgbe_hw *, u32 *, u16, u16);
 int ixgbe_check_for_msg(struct ixgbe_hw *, u16);
@@ -105,6 +107,18 @@ int ixgbe_check_for_rst(struct ixgbe_hw *, u16);
 void ixgbe_init_mbx_params_pf(struct ixgbe_hw *);
 #endif /* CONFIG_PCI_IOV */
 
+struct ixgbe_mbx_operations {
+	int (*init_params)(struct ixgbe_hw *hw);
+	int (*read)(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 vf_number);
+	int (*write)(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 vf_number);
+	int (*read_posted)(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id);
+	int (*write_posted)(struct ixgbe_hw *hw, u32 *msg, u16 size,
+			    u16 mbx_id);
+	int (*check_for_msg)(struct ixgbe_hw *hw, u16 vf_number);
+	int (*check_for_ack)(struct ixgbe_hw *hw, u16 vf_number);
+	int (*check_for_rst)(struct ixgbe_hw *hw, u16 vf_number);
+};
+
 extern const struct ixgbe_mbx_operations mbx_ops_generic;
 
 #endif /* _IXGBE_MBX_H_ */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
index e71715f5da22..9631559a5aea 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -18,6 +18,7 @@
 
 #include "ixgbe.h"
 #include "ixgbe_type.h"
+#include "ixgbe_mbx.h"
 #include "ixgbe_sriov.h"
 
 #ifdef CONFIG_PCI_IOV
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 346e3d9114a8..9baccacd02a1 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -3601,19 +3601,6 @@ struct ixgbe_phy_info {
 	u32				nw_mng_if_sel;
 };
 
-#include "ixgbe_mbx.h"
-
-struct ixgbe_mbx_operations {
-	int (*init_params)(struct ixgbe_hw *hw);
-	int (*read)(struct ixgbe_hw *, u32 *, u16,  u16);
-	int (*write)(struct ixgbe_hw *, u32 *, u16, u16);
-	int (*read_posted)(struct ixgbe_hw *, u32 *, u16,  u16);
-	int (*write_posted)(struct ixgbe_hw *, u32 *, u16, u16);
-	int (*check_for_msg)(struct ixgbe_hw *, u16);
-	int (*check_for_ack)(struct ixgbe_hw *, u16);
-	int (*check_for_rst)(struct ixgbe_hw *, u16);
-};
-
 struct ixgbe_mbx_stats {
 	u32 msgs_tx;
 	u32 msgs_rx;
@@ -3623,6 +3610,8 @@ struct ixgbe_mbx_stats {
 	u32 rsts;
 };
 
+struct ixgbe_mbx_operations;
+
 struct ixgbe_mbx_info {
 	const struct ixgbe_mbx_operations *ops;
 	struct ixgbe_mbx_stats stats;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
index f1ffa398f6df..81e1df83f136 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
@@ -6,6 +6,7 @@
 #include <linux/sched.h>
 
 #include "ixgbe.h"
+#include "ixgbe_mbx.h"
 #include "ixgbe_phy.h"
 #include "ixgbe_x540.h"
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index a5f644934445..d9a8cf018d3b 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -4,6 +4,7 @@
 #include "ixgbe_x540.h"
 #include "ixgbe_type.h"
 #include "ixgbe_common.h"
+#include "ixgbe_mbx.h"
 #include "ixgbe_phy.h"
 
 static int ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *, ixgbe_link_speed);
-- 
2.42.0

[PATCH net-next v2 11/14] igc: remove autoneg parameter from igc_mac_info

[Tony Nguyen]

From: Vitaly Lifshits <vitaly.lifshits@intel.com>

Since the igc driver doesn't support forced speed configuration and
its current related hardware doesn't support it either, there is no
use of the mac.autoneg parameter. Moreover, in one case this usage
might result in a NULL pointer dereference due to an uninitialized
function pointer, phy.ops.force_speed_duplex.

Therefore, remove this parameter from the igc code.

Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/igc/igc_diag.c    |   3 +-
 drivers/net/ethernet/intel/igc/igc_ethtool.c |  13 +-
 drivers/net/ethernet/intel/igc/igc_hw.h      |   1 -
 drivers/net/ethernet/intel/igc/igc_mac.c     | 316 +++++++++----------
 drivers/net/ethernet/intel/igc/igc_main.c    |   1 -
 drivers/net/ethernet/intel/igc/igc_phy.c     |  24 +-
 6 files changed, 163 insertions(+), 195 deletions(-)

diff --git a/drivers/net/ethernet/intel/igc/igc_diag.c b/drivers/net/ethernet/intel/igc/igc_diag.c
index cc621970c0cd..a43d7244ee70 100644
--- a/drivers/net/ethernet/intel/igc/igc_diag.c
+++ b/drivers/net/ethernet/intel/igc/igc_diag.c
@@ -173,8 +173,7 @@ bool igc_link_test(struct igc_adapter *adapter, u64 *data)
 	*data = 0;
 
 	/* add delay to give enough time for autonegotioation to finish */
-	if (adapter->hw.mac.autoneg)
-		ssleep(5);
+	ssleep(5);
 
 	link_up = igc_has_link(adapter);
 	if (!link_up) {
diff --git a/drivers/net/ethernet/intel/igc/igc_ethtool.c b/drivers/net/ethernet/intel/igc/igc_ethtool.c
index 5b0c6f433767..817838677817 100644
--- a/drivers/net/ethernet/intel/igc/igc_ethtool.c
+++ b/drivers/net/ethernet/intel/igc/igc_ethtool.c
@@ -1821,11 +1821,8 @@ static int igc_ethtool_get_link_ksettings(struct net_device *netdev,
 		ethtool_link_ksettings_add_link_mode(cmd, advertising, 2500baseT_Full);
 
 	/* set autoneg settings */
-	if (hw->mac.autoneg == 1) {
-		ethtool_link_ksettings_add_link_mode(cmd, supported, Autoneg);
-		ethtool_link_ksettings_add_link_mode(cmd, advertising,
-						     Autoneg);
-	}
+	ethtool_link_ksettings_add_link_mode(cmd, supported, Autoneg);
+	ethtool_link_ksettings_add_link_mode(cmd, advertising, Autoneg);
 
 	/* Set pause flow control settings */
 	ethtool_link_ksettings_add_link_mode(cmd, supported, Pause);
@@ -1878,10 +1875,7 @@ static int igc_ethtool_get_link_ksettings(struct net_device *netdev,
 		cmd->base.duplex = DUPLEX_UNKNOWN;
 	}
 	cmd->base.speed = speed;
-	if (hw->mac.autoneg)
-		cmd->base.autoneg = AUTONEG_ENABLE;
-	else
-		cmd->base.autoneg = AUTONEG_DISABLE;
+	cmd->base.autoneg = AUTONEG_ENABLE;
 
 	/* MDI-X => 2; MDI =>1; Invalid =>0 */
 	if (hw->phy.media_type == igc_media_type_copper)
@@ -1955,7 +1949,6 @@ igc_ethtool_set_link_ksettings(struct net_device *netdev,
 		advertised |= ADVERTISE_10_HALF;
 
 	if (cmd->base.autoneg == AUTONEG_ENABLE) {
-		hw->mac.autoneg = 1;
 		hw->phy.autoneg_advertised = advertised;
 		if (adapter->fc_autoneg)
 			hw->fc.requested_mode = igc_fc_default;
diff --git a/drivers/net/ethernet/intel/igc/igc_hw.h b/drivers/net/ethernet/intel/igc/igc_hw.h
index e1c572e0d4ef..d9d1a1a11daf 100644
--- a/drivers/net/ethernet/intel/igc/igc_hw.h
+++ b/drivers/net/ethernet/intel/igc/igc_hw.h
@@ -92,7 +92,6 @@ struct igc_mac_info {
 	bool asf_firmware_present;
 	bool arc_subsystem_valid;
 
-	bool autoneg;
 	bool autoneg_failed;
 	bool get_link_status;
 };
diff --git a/drivers/net/ethernet/intel/igc/igc_mac.c b/drivers/net/ethernet/intel/igc/igc_mac.c
index a5c4b19d71a2..d344e0a1cd5e 100644
--- a/drivers/net/ethernet/intel/igc/igc_mac.c
+++ b/drivers/net/ethernet/intel/igc/igc_mac.c
@@ -386,14 +386,6 @@ s32 igc_check_for_copper_link(struct igc_hw *hw)
 	 */
 	igc_check_downshift(hw);
 
-	/* If we are forcing speed/duplex, then we simply return since
-	 * we have already determined whether we have link or not.
-	 */
-	if (!mac->autoneg) {
-		ret_val = -IGC_ERR_CONFIG;
-		goto out;
-	}
-
 	/* Auto-Neg is enabled.  Auto Speed Detection takes care
 	 * of MAC speed/duplex configuration.  So we only need to
 	 * configure Collision Distance in the MAC.
@@ -468,173 +460,171 @@ s32 igc_config_fc_after_link_up(struct igc_hw *hw)
 		goto out;
 	}
 
-	/* Check for the case where we have copper media and auto-neg is
-	 * enabled.  In this case, we need to check and see if Auto-Neg
-	 * has completed, and if so, how the PHY and link partner has
-	 * flow control configured.
+	/* In auto-neg, we need to check and see if Auto-Neg has completed,
+	 * and if so, how the PHY and link partner has flow control
+	 * configured.
 	 */
-	if (mac->autoneg) {
-		/* Read the MII Status Register and check to see if AutoNeg
-		 * has completed.  We read this twice because this reg has
-		 * some "sticky" (latched) bits.
-		 */
-		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS,
-					       &mii_status_reg);
-		if (ret_val)
-			goto out;
-		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS,
-					       &mii_status_reg);
-		if (ret_val)
-			goto out;
 
-		if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) {
-			hw_dbg("Copper PHY and Auto Neg has not completed.\n");
-			goto out;
-		}
+	/* Read the MII Status Register and check to see if AutoNeg
+	 * has completed.  We read this twice because this reg has
+	 * some "sticky" (latched) bits.
+	 */
+	ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS,
+				       &mii_status_reg);
+	if (ret_val)
+		goto out;
+	ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS,
+				       &mii_status_reg);
+	if (ret_val)
+		goto out;
 
-		/* The AutoNeg process has completed, so we now need to
-		 * read both the Auto Negotiation Advertisement
-		 * Register (Address 4) and the Auto_Negotiation Base
-		 * Page Ability Register (Address 5) to determine how
-		 * flow control was negotiated.
-		 */
-		ret_val = hw->phy.ops.read_reg(hw, PHY_AUTONEG_ADV,
-					       &mii_nway_adv_reg);
-		if (ret_val)
-			goto out;
-		ret_val = hw->phy.ops.read_reg(hw, PHY_LP_ABILITY,
-					       &mii_nway_lp_ability_reg);
-		if (ret_val)
-			goto out;
-		/* Two bits in the Auto Negotiation Advertisement Register
-		 * (Address 4) and two bits in the Auto Negotiation Base
-		 * Page Ability Register (Address 5) determine flow control
-		 * for both the PHY and the link partner.  The following
-		 * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
-		 * 1999, describes these PAUSE resolution bits and how flow
-		 * control is determined based upon these settings.
-		 * NOTE:  DC = Don't Care
-		 *
-		 *   LOCAL DEVICE  |   LINK PARTNER
-		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
-		 *-------|---------|-------|---------|--------------------
-		 *   0   |    0    |  DC   |   DC    | igc_fc_none
-		 *   0   |    1    |   0   |   DC    | igc_fc_none
-		 *   0   |    1    |   1   |    0    | igc_fc_none
-		 *   0   |    1    |   1   |    1    | igc_fc_tx_pause
-		 *   1   |    0    |   0   |   DC    | igc_fc_none
-		 *   1   |   DC    |   1   |   DC    | igc_fc_full
-		 *   1   |    1    |   0   |    0    | igc_fc_none
-		 *   1   |    1    |   0   |    1    | igc_fc_rx_pause
-		 *
-		 * Are both PAUSE bits set to 1?  If so, this implies
-		 * Symmetric Flow Control is enabled at both ends.  The
-		 * ASM_DIR bits are irrelevant per the spec.
-		 *
-		 * For Symmetric Flow Control:
-		 *
-		 *   LOCAL DEVICE  |   LINK PARTNER
-		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
-		 *-------|---------|-------|---------|--------------------
-		 *   1   |   DC    |   1   |   DC    | IGC_fc_full
-		 *
-		 */
-		if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
-		    (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
-			/* Now we need to check if the user selected RX ONLY
-			 * of pause frames.  In this case, we had to advertise
-			 * FULL flow control because we could not advertise RX
-			 * ONLY. Hence, we must now check to see if we need to
-			 * turn OFF  the TRANSMISSION of PAUSE frames.
-			 */
-			if (hw->fc.requested_mode == igc_fc_full) {
-				hw->fc.current_mode = igc_fc_full;
-				hw_dbg("Flow Control = FULL.\n");
-			} else {
-				hw->fc.current_mode = igc_fc_rx_pause;
-				hw_dbg("Flow Control = RX PAUSE frames only.\n");
-			}
-		}
+	if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) {
+		hw_dbg("Copper PHY and Auto Neg has not completed.\n");
+		goto out;
+	}
 
-		/* For receiving PAUSE frames ONLY.
-		 *
-		 *   LOCAL DEVICE  |   LINK PARTNER
-		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
-		 *-------|---------|-------|---------|--------------------
-		 *   0   |    1    |   1   |    1    | igc_fc_tx_pause
-		 */
-		else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
-			 (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
-			 (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
-			 (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
-			hw->fc.current_mode = igc_fc_tx_pause;
-			hw_dbg("Flow Control = TX PAUSE frames only.\n");
-		}
-		/* For transmitting PAUSE frames ONLY.
-		 *
-		 *   LOCAL DEVICE  |   LINK PARTNER
-		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
-		 *-------|---------|-------|---------|--------------------
-		 *   1   |    1    |   0   |    1    | igc_fc_rx_pause
-		 */
-		else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
-			 (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
-			 !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
-			 (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
-			hw->fc.current_mode = igc_fc_rx_pause;
-			hw_dbg("Flow Control = RX PAUSE frames only.\n");
-		}
-		/* Per the IEEE spec, at this point flow control should be
-		 * disabled.  However, we want to consider that we could
-		 * be connected to a legacy switch that doesn't advertise
-		 * desired flow control, but can be forced on the link
-		 * partner.  So if we advertised no flow control, that is
-		 * what we will resolve to.  If we advertised some kind of
-		 * receive capability (Rx Pause Only or Full Flow Control)
-		 * and the link partner advertised none, we will configure
-		 * ourselves to enable Rx Flow Control only.  We can do
-		 * this safely for two reasons:  If the link partner really
-		 * didn't want flow control enabled, and we enable Rx, no
-		 * harm done since we won't be receiving any PAUSE frames
-		 * anyway.  If the intent on the link partner was to have
-		 * flow control enabled, then by us enabling RX only, we
-		 * can at least receive pause frames and process them.
-		 * This is a good idea because in most cases, since we are
-		 * predominantly a server NIC, more times than not we will
-		 * be asked to delay transmission of packets than asking
-		 * our link partner to pause transmission of frames.
+	/* The AutoNeg process has completed, so we now need to
+	 * read both the Auto Negotiation Advertisement
+	 * Register (Address 4) and the Auto_Negotiation Base
+	 * Page Ability Register (Address 5) to determine how
+	 * flow control was negotiated.
+	 */
+	ret_val = hw->phy.ops.read_reg(hw, PHY_AUTONEG_ADV,
+				       &mii_nway_adv_reg);
+	if (ret_val)
+		goto out;
+	ret_val = hw->phy.ops.read_reg(hw, PHY_LP_ABILITY,
+				       &mii_nway_lp_ability_reg);
+	if (ret_val)
+		goto out;
+	/* Two bits in the Auto Negotiation Advertisement Register
+	 * (Address 4) and two bits in the Auto Negotiation Base
+	 * Page Ability Register (Address 5) determine flow control
+	 * for both the PHY and the link partner.  The following
+	 * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
+	 * 1999, describes these PAUSE resolution bits and how flow
+	 * control is determined based upon these settings.
+	 * NOTE:  DC = Don't Care
+	 *
+	 *   LOCAL DEVICE  |   LINK PARTNER
+	 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
+	 *-------|---------|-------|---------|--------------------
+	 *   0   |    0    |  DC   |   DC    | igc_fc_none
+	 *   0   |    1    |   0   |   DC    | igc_fc_none
+	 *   0   |    1    |   1   |    0    | igc_fc_none
+	 *   0   |    1    |   1   |    1    | igc_fc_tx_pause
+	 *   1   |    0    |   0   |   DC    | igc_fc_none
+	 *   1   |   DC    |   1   |   DC    | igc_fc_full
+	 *   1   |    1    |   0   |    0    | igc_fc_none
+	 *   1   |    1    |   0   |    1    | igc_fc_rx_pause
+	 *
+	 * Are both PAUSE bits set to 1?  If so, this implies
+	 * Symmetric Flow Control is enabled at both ends.  The
+	 * ASM_DIR bits are irrelevant per the spec.
+	 *
+	 * For Symmetric Flow Control:
+	 *
+	 *   LOCAL DEVICE  |   LINK PARTNER
+	 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+	 *-------|---------|-------|---------|--------------------
+	 *   1   |   DC    |   1   |   DC    | IGC_fc_full
+	 *
+	 */
+	if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+	    (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
+		/* Now we need to check if the user selected RX ONLY
+		 * of pause frames.  In this case, we had to advertise
+		 * FULL flow control because we could not advertise RX
+		 * ONLY. Hence, we must now check to see if we need to
+		 * turn OFF  the TRANSMISSION of PAUSE frames.
 		 */
-		else if ((hw->fc.requested_mode == igc_fc_none) ||
-			 (hw->fc.requested_mode == igc_fc_tx_pause) ||
-			 (hw->fc.strict_ieee)) {
-			hw->fc.current_mode = igc_fc_none;
-			hw_dbg("Flow Control = NONE.\n");
+		if (hw->fc.requested_mode == igc_fc_full) {
+			hw->fc.current_mode = igc_fc_full;
+			hw_dbg("Flow Control = FULL.\n");
 		} else {
 			hw->fc.current_mode = igc_fc_rx_pause;
 			hw_dbg("Flow Control = RX PAUSE frames only.\n");
 		}
+	}
 
-		/* Now we need to do one last check...  If we auto-
-		 * negotiated to HALF DUPLEX, flow control should not be
-		 * enabled per IEEE 802.3 spec.
-		 */
-		ret_val = hw->mac.ops.get_speed_and_duplex(hw, &speed, &duplex);
-		if (ret_val) {
-			hw_dbg("Error getting link speed and duplex\n");
-			goto out;
-		}
+	/* For receiving PAUSE frames ONLY.
+	 *
+	 *   LOCAL DEVICE  |   LINK PARTNER
+	 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+	 *-------|---------|-------|---------|--------------------
+	 *   0   |    1    |   1   |    1    | igc_fc_tx_pause
+	 */
+	else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+		 (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+		 (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+		 (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+		hw->fc.current_mode = igc_fc_tx_pause;
+		hw_dbg("Flow Control = TX PAUSE frames only.\n");
+	}
+	/* For transmitting PAUSE frames ONLY.
+	 *
+	 *   LOCAL DEVICE  |   LINK PARTNER
+	 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+	 *-------|---------|-------|---------|--------------------
+	 *   1   |    1    |   0   |    1    | igc_fc_rx_pause
+	 */
+	else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+		 (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+		 !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+		 (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+		hw->fc.current_mode = igc_fc_rx_pause;
+		hw_dbg("Flow Control = RX PAUSE frames only.\n");
+	}
+	/* Per the IEEE spec, at this point flow control should be
+	 * disabled.  However, we want to consider that we could
+	 * be connected to a legacy switch that doesn't advertise
+	 * desired flow control, but can be forced on the link
+	 * partner.  So if we advertised no flow control, that is
+	 * what we will resolve to.  If we advertised some kind of
+	 * receive capability (Rx Pause Only or Full Flow Control)
+	 * and the link partner advertised none, we will configure
+	 * ourselves to enable Rx Flow Control only.  We can do
+	 * this safely for two reasons:  If the link partner really
+	 * didn't want flow control enabled, and we enable Rx, no
+	 * harm done since we won't be receiving any PAUSE frames
+	 * anyway.  If the intent on the link partner was to have
+	 * flow control enabled, then by us enabling RX only, we
+	 * can at least receive pause frames and process them.
+	 * This is a good idea because in most cases, since we are
+	 * predominantly a server NIC, more times than not we will
+	 * be asked to delay transmission of packets than asking
+	 * our link partner to pause transmission of frames.
+	 */
+	else if ((hw->fc.requested_mode == igc_fc_none) ||
+		 (hw->fc.requested_mode == igc_fc_tx_pause) ||
+		 (hw->fc.strict_ieee)) {
+		hw->fc.current_mode = igc_fc_none;
+		hw_dbg("Flow Control = NONE.\n");
+	} else {
+		hw->fc.current_mode = igc_fc_rx_pause;
+		hw_dbg("Flow Control = RX PAUSE frames only.\n");
+	}
 
-		if (duplex == HALF_DUPLEX)
-			hw->fc.current_mode = igc_fc_none;
+	/* Now we need to do one last check...  If we auto-
+	 * negotiated to HALF DUPLEX, flow control should not be
+	 * enabled per IEEE 802.3 spec.
+	 */
+	ret_val = hw->mac.ops.get_speed_and_duplex(hw, &speed, &duplex);
+	if (ret_val) {
+		hw_dbg("Error getting link speed and duplex\n");
+		goto out;
+	}
 
-		/* Now we call a subroutine to actually force the MAC
-		 * controller to use the correct flow control settings.
-		 */
-		ret_val = igc_force_mac_fc(hw);
-		if (ret_val) {
-			hw_dbg("Error forcing flow control settings\n");
-			goto out;
-		}
+	if (duplex == HALF_DUPLEX)
+		hw->fc.current_mode = igc_fc_none;
+
+	/* Now we call a subroutine to actually force the MAC
+	 * controller to use the correct flow control settings.
+	 */
+	ret_val = igc_force_mac_fc(hw);
+	if (ret_val) {
+		hw_dbg("Error forcing flow control settings\n");
+		goto out;
 	}
 
 out:
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 6e70bca15db1..27872bdea9bd 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -7108,7 +7108,6 @@ static int igc_probe(struct pci_dev *pdev,
 
 	/* Initialize link properties that are user-changeable */
 	adapter->fc_autoneg = true;
-	hw->mac.autoneg = true;
 	hw->phy.autoneg_advertised = 0xaf;
 
 	hw->fc.requested_mode = igc_fc_default;
diff --git a/drivers/net/ethernet/intel/igc/igc_phy.c b/drivers/net/ethernet/intel/igc/igc_phy.c
index 2801e5f24df9..6c4d204aecfa 100644
--- a/drivers/net/ethernet/intel/igc/igc_phy.c
+++ b/drivers/net/ethernet/intel/igc/igc_phy.c
@@ -494,24 +494,12 @@ s32 igc_setup_copper_link(struct igc_hw *hw)
 	s32 ret_val = 0;
 	bool link;
 
-	if (hw->mac.autoneg) {
-		/* Setup autoneg and flow control advertisement and perform
-		 * autonegotiation.
-		 */
-		ret_val = igc_copper_link_autoneg(hw);
-		if (ret_val)
-			goto out;
-	} else {
-		/* PHY will be set to 10H, 10F, 100H or 100F
-		 * depending on user settings.
-		 */
-		hw_dbg("Forcing Speed and Duplex\n");
-		ret_val = hw->phy.ops.force_speed_duplex(hw);
-		if (ret_val) {
-			hw_dbg("Error Forcing Speed and Duplex\n");
-			goto out;
-		}
-	}
+	/* Setup autoneg and flow control advertisement and perform
+	 * autonegotiation.
+	 */
+	ret_val = igc_copper_link_autoneg(hw);
+	if (ret_val)
+		goto out;
 
 	/* Check link status. Wait up to 100 microseconds for link to become
 	 * valid.
-- 
2.42.0

[PATCH net-next v2 12/14] igb: Fix 2 typos in comments in igb_main.c

[Tony Nguyen]

From: Johnny Park <pjohnny0508@gmail.com>

Fix 2 spelling mistakes in comments in `igb_main.c`.

Signed-off-by: Johnny Park <pjohnny0508@gmail.com>
Acked-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index b83df5f94b1f..37b674f8cbcd 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1204,7 +1204,7 @@ static int igb_alloc_q_vector(struct igb_adapter *adapter,
 	/* initialize pointer to rings */
 	ring = q_vector->ring;
 
-	/* intialize ITR */
+	/* initialize ITR */
 	if (rxr_count) {
 		/* rx or rx/tx vector */
 		if (!adapter->rx_itr_setting || adapter->rx_itr_setting > 3)
@@ -3906,7 +3906,7 @@ static void igb_remove(struct pci_dev *pdev)
  *
  *  This function initializes the vf specific data storage and then attempts to
  *  allocate the VFs.  The reason for ordering it this way is because it is much
- *  mor expensive time wise to disable SR-IOV than it is to allocate and free
+ *  more expensive time wise to disable SR-IOV than it is to allocate and free
  *  the memory for the VFs.
  **/
 static void igb_probe_vfs(struct igb_adapter *adapter)
-- 
2.42.0

[PATCH net-next v2 13/14] igbvf: remove unused spinlock

[Tony Nguyen]

From: Wander Lairson Costa <wander@redhat.com>

tx_queue_lock and stats_lock are declared and initialized, but never
used. Remove them.

Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/igbvf/igbvf.h  | 3 ---
 drivers/net/ethernet/intel/igbvf/netdev.c | 3 ---
 2 files changed, 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/igbvf/igbvf.h b/drivers/net/ethernet/intel/igbvf/igbvf.h
index 6ad35a00a287..ca6e44245a7b 100644
--- a/drivers/net/ethernet/intel/igbvf/igbvf.h
+++ b/drivers/net/ethernet/intel/igbvf/igbvf.h
@@ -169,8 +169,6 @@ struct igbvf_adapter {
 	u16 link_speed;
 	u16 link_duplex;
 
-	spinlock_t tx_queue_lock; /* prevent concurrent tail updates */
-
 	/* track device up/down/testing state */
 	unsigned long state;
 
@@ -220,7 +218,6 @@ struct igbvf_adapter {
 	/* OS defined structs */
 	struct net_device *netdev;
 	struct pci_dev *pdev;
-	spinlock_t stats_lock; /* prevent concurrent stats updates */
 
 	/* structs defined in e1000_hw.h */
 	struct e1000_hw hw;
diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c
index 925d7286a8ee..02044aa2181b 100644
--- a/drivers/net/ethernet/intel/igbvf/netdev.c
+++ b/drivers/net/ethernet/intel/igbvf/netdev.c
@@ -1656,12 +1656,9 @@ static int igbvf_sw_init(struct igbvf_adapter *adapter)
 	if (igbvf_alloc_queues(adapter))
 		return -ENOMEM;
 
-	spin_lock_init(&adapter->tx_queue_lock);
-
 	/* Explicitly disable IRQ since the NIC can be in any state. */
 	igbvf_irq_disable(adapter);
 
-	spin_lock_init(&adapter->stats_lock);
 	spin_lock_init(&adapter->hw.mbx_lock);
 
 	set_bit(__IGBVF_DOWN, &adapter->state);
-- 
2.42.0

[PATCH net-next v2 14/14] e1000: Hold RTNL when e1000_down can be called

[Tony Nguyen]

From: Joe Damato <jdamato@fastly.com>

e1000_down calls netif_queue_set_napi, which assumes that RTNL is held.

There are a few paths for e1000_down to be called in e1000 where RTNL is
not currently being held:
  - e1000_shutdown (pci shutdown)
  - e1000_suspend (power management)
  - e1000_reinit_locked (via e1000_reset_task delayed work)
  - e1000_io_error_detected (via pci error handler)

Hold RTNL in three places to fix this issue:
  - e1000_reset_task: igc, igb, and e100e all hold rtnl in this path.
  - e1000_io_error_detected (pci error handler): e1000e and ixgbe hold
    rtnl in this path. A patch has been posted for igc to do the same
    [1].
  - __e1000_shutdown (which is called from both e1000_shutdown and
    e1000_suspend): igb, ixgbe, and e1000e all hold rtnl in the same
    path.

The other paths which call e1000_down seemingly hold RTNL and are OK:
  - e1000_close (ndo_stop)
  - e1000_change_mtu (ndo_change_mtu)

Based on the above analysis and mailing list discussion [2], I believe
adding rtnl in the three places mentioned above is correct.

Fixes: 8f7ff18a5ec7 ("e1000: Link NAPI instances to queues and IRQs")
Reported-by: Dmitry Antipov <dmantipov@yandex.ru>
Closes: https://lore.kernel.org/netdev/8cf62307-1965-46a0-a411-ff0080090ff9@yandex.ru/
Link: https://lore.kernel.org/netdev/20241022215246.307821-3-jdamato@fastly.com/ [1]
Link: https://lore.kernel.org/netdev/ZxgVRX7Ne-lTjwiJ@LQ3V64L9R2/ [2]
Signed-off-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/e1000/e1000_main.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index 4de9b156b2be..3f089c3d47b2 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -3509,7 +3509,9 @@ static void e1000_reset_task(struct work_struct *work)
 		container_of(work, struct e1000_adapter, reset_task);
 
 	e_err(drv, "Reset adapter\n");
+	rtnl_lock();
 	e1000_reinit_locked(adapter);
+	rtnl_unlock();
 }
 
 /**
@@ -5074,7 +5076,9 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
 			usleep_range(10000, 20000);
 
 		WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
+		rtnl_lock();
 		e1000_down(adapter);
+		rtnl_unlock();
 	}
 
 	status = er32(STATUS);
@@ -5235,16 +5239,20 @@ static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 
+	rtnl_lock();
 	netif_device_detach(netdev);
 
-	if (state == pci_channel_io_perm_failure)
+	if (state == pci_channel_io_perm_failure) {
+		rtnl_unlock();
 		return PCI_ERS_RESULT_DISCONNECT;
+	}
 
 	if (netif_running(netdev))
 		e1000_down(adapter);
 
 	if (!test_and_set_bit(__E1000_DISABLED, &adapter->flags))
 		pci_disable_device(pdev);
+	rtnl_unlock();
 
 	/* Request a slot reset. */
 	return PCI_ERS_RESULT_NEED_RESET;
-- 
2.42.0

Re: [PATCH net-next v2 13/14] igbvf: remove unused spinlock

[Paul Menzel]

Dear Wander, dear Linux folks,


Thank you for your patch.


Am 13.11.24 um 19:54 schrieb Tony Nguyen:
> From: Wander Lairson Costa <wander@redhat.com>
> 
> tx_queue_lock and stats_lock are declared and initialized, but never
> used. Remove them.
> 
> Signed-off-by: Wander Lairson Costa <wander@redhat.com>
> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Would a Fixes: tag be handy?


Kind regards,

Paul

Re: [PATCH net-next v2 13/14] igbvf: remove unused spinlock

[Wander Lairson Costa]

On Thu, Nov 14, 2024 at 5:04 AM Paul Menzel <pmenzel@molgen.mpg.de> wrote:
>
> Dear Wander, dear Linux folks,
>
>
> Thank you for your patch.
>
>
> Am 13.11.24 um 19:54 schrieb Tony Nguyen:
> > From: Wander Lairson Costa <wander@redhat.com>
> >
> > tx_queue_lock and stats_lock are declared and initialized, but never
> > used. Remove them.
> >
> > Signed-off-by: Wander Lairson Costa <wander@redhat.com>
> > Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
> > Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
>
> Would a Fixes: tag be handy?
>

Hrm, this is not fixing anything, actually. It is just a cleanup.

>
> Kind regards,
>
> Paul
>

Re: [PATCH net-next v2 00/14][pull request] Intel Wired LAN Driver Updates 2024-11-05 (ice, ixgbe, igc. igb, igbvf, e1000)

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (main)
by Tony Nguyen <anthony.l.nguyen@intel.com>:

On Wed, 13 Nov 2024 10:54:15 -0800 you wrote:
> For ice:
> 
> Mateusz refactors and adds additional SerDes configuration values to be
> output.
> 
> Przemek refactors processing of DDP and adds support for a flag field in
> the DDP's signature segment header.
> 
> [...]

Here is the summary with links:
  - [net-next,v2,01/14] ice: rework of dump serdes equalizer values feature
    https://git.kernel.org/netdev/net-next/c/8ea085937dad
  - [net-next,v2,02/14] ice: extend dump serdes equalizer values feature
    https://git.kernel.org/netdev/net-next/c/99dbcab0cdd6
  - [net-next,v2,03/14] ice: refactor "last" segment of DDP pkg
    https://git.kernel.org/netdev/net-next/c/d6920900398a
  - [net-next,v2,04/14] ice: support optional flags in signature segment header
    https://git.kernel.org/netdev/net-next/c/09ec79d42e42
  - [net-next,v2,05/14] ice: Add support for persistent NAPI config
    https://git.kernel.org/netdev/net-next/c/492a044508ad
  - [net-next,v2,06/14] ice: only allow Tx promiscuous for multicast
    https://git.kernel.org/netdev/net-next/c/2a52984c53f3
  - [net-next,v2,07/14] ice: initialize pf->supported_rxdids immediately after loading DDP
    https://git.kernel.org/netdev/net-next/c/8cca16be5efc
  - [net-next,v2,08/14] ice: use stack variable for virtchnl_supported_rxdids
    https://git.kernel.org/netdev/net-next/c/eaa3e9876bbc
  - [net-next,v2,09/14] ice: Unbind the workqueue
    https://git.kernel.org/netdev/net-next/c/fcc17a3ba0ce
  - [net-next,v2,10/14] ixgbe: Break include dependency cycle
    https://git.kernel.org/netdev/net-next/c/4b2c75ffeaad
  - [net-next,v2,11/14] igc: remove autoneg parameter from igc_mac_info
    https://git.kernel.org/netdev/net-next/c/ade6fded7957
  - [net-next,v2,12/14] igb: Fix 2 typos in comments in igb_main.c
    https://git.kernel.org/netdev/net-next/c/f40b0acad688
  - [net-next,v2,13/14] igbvf: remove unused spinlock
    https://git.kernel.org/netdev/net-next/c/4d26b6eccdc2
  - [net-next,v2,14/14] e1000: Hold RTNL when e1000_down can be called
    https://git.kernel.org/netdev/net-next/c/e400c7444d84

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html