[net-next] Octeontx2-af: RPM: Register driver with PCI subsys IDs

[net-next] Octeontx2-af: RPM: Register driver with PCI subsys IDs

[Hariprasad Kelam]

Although the PCI device ID and Vendor ID for the RPM (MAC) block
have remained the same across Octeon CN10K and the next-generation
CN20K silicon, Hardware architecture has changed (NIX mapped RPMs
and RFOE Mapped RPMs).

Add PCI Subsystem IDs to the device table to ensure that this driver
can be probed from NIX mapped RPM devices only.

Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
---
 drivers/net/ethernet/marvell/octeontx2/af/cgx.c | 14 ++++++++++++--
 drivers/net/ethernet/marvell/octeontx2/af/rvu.h |  2 ++
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
index 8216f843a7cd..0b27a695008b 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
@@ -66,8 +66,18 @@ static int cgx_fwi_link_change(struct cgx *cgx, int lmac_id, bool en);
 /* Supported devices */
 static const struct pci_device_id cgx_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_OCTEONTX2_CGX) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_CN10K_RPM) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_CN10KB_RPM) },
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_CN10K_RPM,
+	  PCI_ANY_ID, PCI_SUBSYS_DEVID_CN10K_A) },
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_CN10K_RPM,
+	  PCI_ANY_ID, PCI_SUBSYS_DEVID_CNF10K_A) },
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_CN10K_RPM,
+	  PCI_ANY_ID, PCI_SUBSYS_DEVID_CNF10K_B) },
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_CN10KB_RPM,
+	  PCI_ANY_ID, PCI_SUBSYS_DEVID_CN10K_B) },
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_CN10KB_RPM,
+	  PCI_ANY_ID, PCI_SUBSYS_DEVID_CN20KA) },
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_CN10KB_RPM,
+	  PCI_ANY_ID, PCI_SUBSYS_DEVID_CNF20KA) },
 	{ 0, }  /* end of table */
 };
 
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
index a383b5ef5b2d..60f085b00a8c 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
@@ -30,6 +30,8 @@
 #define PCI_SUBSYS_DEVID_CNF10K_A	       0xBA00
 #define PCI_SUBSYS_DEVID_CNF10K_B              0xBC00
 #define PCI_SUBSYS_DEVID_CN10K_B               0xBD00
+#define PCI_SUBSYS_DEVID_CN20KA                0xC220
+#define PCI_SUBSYS_DEVID_CNF20KA               0xC320
 
 /* PCI BAR nos */
 #define	PCI_AF_REG_BAR_NUM			0
-- 
2.43.0

Re: [net-next] Octeontx2-af: RPM: Register driver with PCI subsys IDs

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@kernel.org>:

On Mon, 24 Feb 2025 09:26:03 +0530 you wrote:
> Although the PCI device ID and Vendor ID for the RPM (MAC) block
> have remained the same across Octeon CN10K and the next-generation
> CN20K silicon, Hardware architecture has changed (NIX mapped RPMs
> and RFOE Mapped RPMs).
> 
> Add PCI Subsystem IDs to the device table to ensure that this driver
> can be probed from NIX mapped RPM devices only.
> 
> [...]

Here is the summary with links:
  - [net-next] Octeontx2-af: RPM: Register driver with PCI subsys IDs
    https://git.kernel.org/netdev/net-next/c/fc9167192f29

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html