From: Tariq Toukan <tariqt@nvidia.com>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Eric Dumazet <edumazet@google.com>,
"Andrew Lunn" <andrew+netdev@lunn.ch>
Cc: Gal Pressman <gal@nvidia.com>,
Leon Romanovsky <leonro@nvidia.com>,
"Saeed Mahameed" <saeedm@nvidia.com>,
Leon Romanovsky <leon@kernel.org>,
Tariq Toukan <tariqt@nvidia.com>, <netdev@vger.kernel.org>,
<linux-rdma@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Moshe Shemesh <moshe@nvidia.com>, Mark Bloch <mbloch@nvidia.com>
Subject: [PATCH net 2/2] net/mlx5: Start health poll after enable hca
Date: Tue, 18 Mar 2025 22:51:17 +0200 [thread overview]
Message-ID: <1742331077-102038-3-git-send-email-tariqt@nvidia.com> (raw)
In-Reply-To: <1742331077-102038-1-git-send-email-tariqt@nvidia.com>
From: Moshe Shemesh <moshe@nvidia.com>
The health poll mechanism performs periodic checks to detect firmware
errors. One of the checks verifies the function is still enabled on
firmware side, but the function is enabled only after enable_hca command
completed. Start health poll after enable_hca command to avoid a race
between function enabled and first health polling.
Fixes: 9b98d395b85d ("net/mlx5: Start health poll at earlier stage of driver load")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
---
drivers/net/ethernet/mellanox/mlx5/core/main.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index ec956c4bcebd..7c3312d6aed9 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -1205,24 +1205,24 @@ static int mlx5_function_enable(struct mlx5_core_dev *dev, bool boot, u64 timeou
dev->caps.embedded_cpu = mlx5_read_embedded_cpu(dev);
mlx5_cmd_set_state(dev, MLX5_CMDIF_STATE_UP);
- mlx5_start_health_poll(dev);
-
err = mlx5_core_enable_hca(dev, 0);
if (err) {
mlx5_core_err(dev, "enable hca failed\n");
- goto stop_health_poll;
+ goto err_cmd_cleanup;
}
+ mlx5_start_health_poll(dev);
+
err = mlx5_core_set_issi(dev);
if (err) {
mlx5_core_err(dev, "failed to set issi\n");
- goto err_disable_hca;
+ goto stop_health_poll;
}
err = mlx5_satisfy_startup_pages(dev, 1);
if (err) {
mlx5_core_err(dev, "failed to allocate boot pages\n");
- goto err_disable_hca;
+ goto stop_health_poll;
}
err = mlx5_tout_query_dtor(dev);
@@ -1235,10 +1235,9 @@ static int mlx5_function_enable(struct mlx5_core_dev *dev, bool boot, u64 timeou
reclaim_boot_pages:
mlx5_reclaim_startup_pages(dev);
-err_disable_hca:
- mlx5_core_disable_hca(dev, 0);
stop_health_poll:
mlx5_stop_health_poll(dev, boot);
+ mlx5_core_disable_hca(dev, 0);
err_cmd_cleanup:
mlx5_cmd_set_state(dev, MLX5_CMDIF_STATE_DOWN);
mlx5_cmd_disable(dev);
@@ -1249,8 +1248,8 @@ static int mlx5_function_enable(struct mlx5_core_dev *dev, bool boot, u64 timeou
static void mlx5_function_disable(struct mlx5_core_dev *dev, bool boot)
{
mlx5_reclaim_startup_pages(dev);
- mlx5_core_disable_hca(dev, 0);
mlx5_stop_health_poll(dev, boot);
+ mlx5_core_disable_hca(dev, 0);
mlx5_cmd_set_state(dev, MLX5_CMDIF_STATE_DOWN);
mlx5_cmd_disable(dev);
}
--
2.31.1
next prev parent reply other threads:[~2025-03-18 20:52 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-18 20:51 [PATCH net 0/2] mlx5 misc fixes 2025-03-18 Tariq Toukan
2025-03-18 20:51 ` [PATCH net 1/2] net/mlx5: LAG, reload representors on LAG creation failure Tariq Toukan
2025-03-19 7:13 ` Michal Swiatkowski
2025-03-19 11:36 ` Kalesh Anakkur Purayil
2025-03-18 20:51 ` Tariq Toukan [this message]
2025-03-19 9:36 ` [PATCH net 2/2] net/mlx5: Start health poll after enable hca Michal Swiatkowski
2025-03-19 11:35 ` Kalesh Anakkur Purayil
2025-03-24 22:30 ` [PATCH net 0/2] mlx5 misc fixes 2025-03-18 patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1742331077-102038-3-git-send-email-tariqt@nvidia.com \
--to=tariqt@nvidia.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=gal@nvidia.com \
--cc=kuba@kernel.org \
--cc=leon@kernel.org \
--cc=leonro@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=mbloch@nvidia.com \
--cc=moshe@nvidia.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=saeedm@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).