[PATCH net-next v2 0/7] net: dsa: b53: mmap: Add bcm63xx EPHY power control

[PATCH net-next v2 0/7] net: dsa: b53: mmap: Add bcm63xx EPHY power control

[Kyle Hendry]

The gpio controller on some bcm63xx SoCs has a register for
controlling functionality of the internal fast ethernet phys.
These patches allow the b53 driver to enable/disable phy
power.

The register also contains reset bits which will be set by
a reset driver in another patch series:
https://lore.kernel.org/all/20250715234605.36216-1-kylehendrydev@gmail.com/

v2 changes:
- Add more description to dt binding
- Squash commit adding syscon lookup into where the result is checked

v1: https://lore.kernel.org/netdev/20250716002922.230807-1-kylehendrydev@gmail.com/

Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>

Kyle Hendry (7):
  net: dsa: b53: Add phy_enable(), phy_disable() methods
  dt-bindings: net: dsa: b53: Document brcm,gpio-ctrl property
  net: dsa: b53: Define chip IDs for more bcm63xx SoCs
  net: dsa: b53: mmap: Add syscon reference and register layout for
    bcm63268
  net: dsa: b53: mmap: Add register layout for bcm6318
  net: dsa: b53: mmap: Add register layout for bcm6368
  net: dsa: b53: mmap: Implement bcm63xx ephy power control

 .../devicetree/bindings/net/dsa/brcm,b53.yaml |   6 +
 drivers/net/dsa/b53/b53_common.c              |  27 ++---
 drivers/net/dsa/b53/b53_mmap.c                | 107 +++++++++++++++++-
 drivers/net/dsa/b53/b53_priv.h                |  15 ++-
 4 files changed, 134 insertions(+), 21 deletions(-)

-- 
2.43.0

[PATCH net-next v2 1/7] net: dsa: b53: Add phy_enable(), phy_disable() methods

[Kyle Hendry]

Add phy enable/disable to b53 ops to be called when
enabling/disabling ports.

Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
 drivers/net/dsa/b53/b53_common.c | 6 ++++++
 drivers/net/dsa/b53/b53_priv.h   | 2 ++
 2 files changed, 8 insertions(+)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 46978757c972..77acc7b8abfb 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -689,6 +689,9 @@ int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
 
 	cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
 
+	if (dev->ops->phy_enable)
+		dev->ops->phy_enable(dev, port);
+
 	if (dev->ops->irq_enable)
 		ret = dev->ops->irq_enable(dev, port);
 	if (ret)
@@ -727,6 +730,9 @@ void b53_disable_port(struct dsa_switch *ds, int port)
 	reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE;
 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
 
+	if (dev->ops->phy_disable)
+		dev->ops->phy_disable(dev, port);
+
 	if (dev->ops->irq_disable)
 		dev->ops->irq_disable(dev, port);
 }
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index b1b9e8882ba4..f1124f5e50da 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -45,6 +45,8 @@ struct b53_io_ops {
 	int (*phy_write16)(struct b53_device *dev, int addr, int reg, u16 value);
 	int (*irq_enable)(struct b53_device *dev, int port);
 	void (*irq_disable)(struct b53_device *dev, int port);
+	void (*phy_enable)(struct b53_device *dev, int port);
+	void (*phy_disable)(struct b53_device *dev, int port);
 	void (*phylink_get_caps)(struct b53_device *dev, int port,
 				 struct phylink_config *config);
 	struct phylink_pcs *(*phylink_mac_select_pcs)(struct b53_device *dev,
-- 
2.43.0

[PATCH net-next v2 2/7] dt-bindings: net: dsa: b53: Document brcm,gpio-ctrl property

[Kyle Hendry]

Add description for bcm63xx gpio-ctrl phandle which allows
access to registers that control phy functionality.

Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
---
 Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
index d6c957a33b48..fbab3a1a8d3e 100644
--- a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
@@ -66,6 +66,12 @@ properties:
               - brcm,bcm63268-switch
           - const: brcm,bcm63xx-switch
 
+  brcm,gpio-ctrl:
+    description:
+      A phandle to the syscon node of the bcm63xx gpio controller
+      which contains phy control registers
+    $ref: /schemas/types.yaml#/definitions/phandle
+
 required:
   - compatible
   - reg
-- 
2.43.0

[PATCH net-next v2 3/7] net: dsa: b53: Define chip IDs for more bcm63xx SoCs

[Kyle Hendry]

Add defines for bcm6318, bcm6328, bcm6362, bcm6368 chip IDs,
update tables and switch init.

Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
 drivers/net/dsa/b53/b53_common.c | 21 ++++++---------------
 drivers/net/dsa/b53/b53_mmap.c   |  8 ++++----
 drivers/net/dsa/b53/b53_priv.h   | 13 +++++++++++--
 3 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 77acc7b8abfb..9942fb6f7f4b 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1410,7 +1410,7 @@ static void b53_adjust_63xx_rgmii(struct dsa_switch *ds, int port,
 	b53_read8(dev, B53_CTRL_PAGE, B53_RGMII_CTRL_P(port), &rgmii_ctrl);
 	rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC);
 
-	if (is63268(dev))
+	if (is6318_268(dev))
 		rgmii_ctrl |= RGMII_CTRL_MII_OVERRIDE;
 
 	rgmii_ctrl |= RGMII_CTRL_ENABLE_GMII;
@@ -2774,19 +2774,6 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX,
 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX,
 	},
-	{
-		.chip_id = BCM63268_DEVICE_ID,
-		.dev_name = "BCM63268",
-		.vlans = 4096,
-		.enabled_ports = 0, /* pdata must provide them */
-		.arl_bins = 4,
-		.arl_buckets = 1024,
-		.imp_port = 8,
-		.vta_regs = B53_VTA_REGS_63XX,
-		.duplex_reg = B53_DUPLEX_STAT_63XX,
-		.jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX,
-		.jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX,
-	},
 	{
 		.chip_id = BCM53010_DEVICE_ID,
 		.dev_name = "BCM53010",
@@ -2936,13 +2923,17 @@ static const struct b53_chip_data b53_switch_chips[] = {
 
 static int b53_switch_init(struct b53_device *dev)
 {
+	u32 chip_id = dev->chip_id;
 	unsigned int i;
 	int ret;
 
+	if (is63xx(dev))
+		chip_id = BCM63XX_DEVICE_ID;
+
 	for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) {
 		const struct b53_chip_data *chip = &b53_switch_chips[i];
 
-		if (chip->chip_id == dev->chip_id) {
+		if (chip->chip_id == chip_id) {
 			if (!dev->enabled_ports)
 				dev->enabled_ports = chip->enabled_ports;
 			dev->name = chip->dev_name;
diff --git a/drivers/net/dsa/b53/b53_mmap.c b/drivers/net/dsa/b53/b53_mmap.c
index c687360a5b7f..f97556c6ca2a 100644
--- a/drivers/net/dsa/b53/b53_mmap.c
+++ b/drivers/net/dsa/b53/b53_mmap.c
@@ -348,16 +348,16 @@ static const struct of_device_id b53_mmap_of_table[] = {
 		.data = (void *)BCM63XX_DEVICE_ID,
 	}, {
 		.compatible = "brcm,bcm6318-switch",
-		.data = (void *)BCM63268_DEVICE_ID,
+		.data = (void *)BCM6318_DEVICE_ID,
 	}, {
 		.compatible = "brcm,bcm6328-switch",
-		.data = (void *)BCM63XX_DEVICE_ID,
+		.data = (void *)BCM6328_DEVICE_ID,
 	}, {
 		.compatible = "brcm,bcm6362-switch",
-		.data = (void *)BCM63XX_DEVICE_ID,
+		.data = (void *)BCM6362_DEVICE_ID,
 	}, {
 		.compatible = "brcm,bcm6368-switch",
-		.data = (void *)BCM63XX_DEVICE_ID,
+		.data = (void *)BCM6368_DEVICE_ID,
 	}, {
 		.compatible = "brcm,bcm63268-switch",
 		.data = (void *)BCM63268_DEVICE_ID,
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index f1124f5e50da..458775f95164 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -73,6 +73,10 @@ enum {
 	BCM53125_DEVICE_ID = 0x53125,
 	BCM53128_DEVICE_ID = 0x53128,
 	BCM63XX_DEVICE_ID = 0x6300,
+	BCM6318_DEVICE_ID = 0x6318,
+	BCM6328_DEVICE_ID = 0x6328,
+	BCM6362_DEVICE_ID = 0x6362,
+	BCM6368_DEVICE_ID = 0x6368,
 	BCM63268_DEVICE_ID = 0x63268,
 	BCM53010_DEVICE_ID = 0x53010,
 	BCM53011_DEVICE_ID = 0x53011,
@@ -220,12 +224,17 @@ static inline int is531x5(struct b53_device *dev)
 static inline int is63xx(struct b53_device *dev)
 {
 	return dev->chip_id == BCM63XX_DEVICE_ID ||
+		dev->chip_id == BCM6318_DEVICE_ID ||
+		dev->chip_id == BCM6328_DEVICE_ID ||
+		dev->chip_id == BCM6362_DEVICE_ID ||
+		dev->chip_id == BCM6368_DEVICE_ID ||
 		dev->chip_id == BCM63268_DEVICE_ID;
 }
 
-static inline int is63268(struct b53_device *dev)
+static inline int is6318_268(struct b53_device *dev)
 {
-	return dev->chip_id == BCM63268_DEVICE_ID;
+	return dev->chip_id == BCM6318_DEVICE_ID ||
+		dev->chip_id == BCM63268_DEVICE_ID;
 }
 
 static inline int is5301x(struct b53_device *dev)
-- 
2.43.0

[PATCH net-next v2 4/7] net: dsa: b53: mmap: Add syscon reference and register layout for bcm63268

[Kyle Hendry]

On bcm63xx SoCs there are registers that control the PHYs in
the GPIO controller. Allow the b53 driver to access them
by passing in the syscon through the device tree.

Add a structure to describe the ephy control register
and add register info for bcm63268.

Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
---
 drivers/net/dsa/b53/b53_mmap.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/net/dsa/b53/b53_mmap.c b/drivers/net/dsa/b53/b53_mmap.c
index f97556c6ca2a..35bf39ab2771 100644
--- a/drivers/net/dsa/b53/b53_mmap.c
+++ b/drivers/net/dsa/b53/b53_mmap.c
@@ -21,13 +21,32 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/io.h>
+#include <linux/mfd/syscon.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/b53.h>
 
 #include "b53_priv.h"
 
+struct b53_phy_info {
+	u32 ephy_enable_mask;
+	u32 ephy_port_mask;
+	u32 ephy_bias_bit;
+	const u32 *ephy_offset;
+};
+
 struct b53_mmap_priv {
 	void __iomem *regs;
+	struct regmap *gpio_ctrl;
+	const struct b53_phy_info *phy_info;
+};
+
+static const u32 bcm63268_ephy_offsets[] = {4, 9, 14};
+
+static const struct b53_phy_info bcm63268_ephy_info = {
+	.ephy_enable_mask = GENMASK(4, 0),
+	.ephy_port_mask = GENMASK((ARRAY_SIZE(bcm63268_ephy_offsets) - 1), 0),
+	.ephy_bias_bit = 24,
+	.ephy_offset = bcm63268_ephy_offsets,
 };
 
 static int b53_mmap_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
@@ -313,6 +332,12 @@ static int b53_mmap_probe(struct platform_device *pdev)
 
 	priv->regs = pdata->regs;
 
+	priv->gpio_ctrl = syscon_regmap_lookup_by_phandle(np, "brcm,gpio-ctrl");
+	if (!IS_ERR(priv->gpio_ctrl)) {
+		if (pdata->chip_id == BCM63268_DEVICE_ID)
+			priv->phy_info = &bcm63268_ephy_info;
+	}
+
 	dev = b53_switch_alloc(&pdev->dev, &b53_mmap_ops, priv);
 	if (!dev)
 		return -ENOMEM;
-- 
2.43.0

[PATCH net-next v2 5/7] net: dsa: b53: mmap: Add register layout for bcm6318

[Kyle Hendry]

Add ephy register info for bcm6318, which also applies to
bcm6328 and bcm6362.

Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
---
 drivers/net/dsa/b53/b53_mmap.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/b53/b53_mmap.c b/drivers/net/dsa/b53/b53_mmap.c
index 35bf39ab2771..51303f075a1f 100644
--- a/drivers/net/dsa/b53/b53_mmap.c
+++ b/drivers/net/dsa/b53/b53_mmap.c
@@ -40,6 +40,15 @@ struct b53_mmap_priv {
 	const struct b53_phy_info *phy_info;
 };
 
+static const u32 bcm6318_ephy_offsets[] = {4, 5, 6, 7};
+
+static const struct b53_phy_info bcm6318_ephy_info = {
+	.ephy_enable_mask = BIT(0) | BIT(4) | BIT(8) | BIT(12) | BIT(16),
+	.ephy_port_mask = GENMASK((ARRAY_SIZE(bcm6318_ephy_offsets) - 1), 0),
+	.ephy_bias_bit = 24,
+	.ephy_offset = bcm6318_ephy_offsets,
+};
+
 static const u32 bcm63268_ephy_offsets[] = {4, 9, 14};
 
 static const struct b53_phy_info bcm63268_ephy_info = {
@@ -334,7 +343,11 @@ static int b53_mmap_probe(struct platform_device *pdev)
 
 	priv->gpio_ctrl = syscon_regmap_lookup_by_phandle(np, "brcm,gpio-ctrl");
 	if (!IS_ERR(priv->gpio_ctrl)) {
-		if (pdata->chip_id == BCM63268_DEVICE_ID)
+		if (pdata->chip_id == BCM6318_DEVICE_ID ||
+		    pdata->chip_id == BCM6328_DEVICE_ID ||
+		    pdata->chip_id == BCM6362_DEVICE_ID)
+			priv->phy_info = &bcm6318_ephy_info;
+		else if (pdata->chip_id == BCM63268_DEVICE_ID)
 			priv->phy_info = &bcm63268_ephy_info;
 	}
 
-- 
2.43.0

[PATCH net-next v2 6/7] net: dsa: b53: mmap: Add register layout for bcm6368

[Kyle Hendry]

Add ephy register info for bcm6368.

Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
---
 drivers/net/dsa/b53/b53_mmap.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/net/dsa/b53/b53_mmap.c b/drivers/net/dsa/b53/b53_mmap.c
index 51303f075a1f..8f5914e2a790 100644
--- a/drivers/net/dsa/b53/b53_mmap.c
+++ b/drivers/net/dsa/b53/b53_mmap.c
@@ -49,6 +49,15 @@ static const struct b53_phy_info bcm6318_ephy_info = {
 	.ephy_offset = bcm6318_ephy_offsets,
 };
 
+static const u32 bcm6368_ephy_offsets[] = {2, 3, 4, 5};
+
+static const struct b53_phy_info bcm6368_ephy_info = {
+	.ephy_enable_mask = BIT(0),
+	.ephy_port_mask = GENMASK((ARRAY_SIZE(bcm6368_ephy_offsets) - 1), 0),
+	.ephy_bias_bit = 0,
+	.ephy_offset = bcm6368_ephy_offsets,
+};
+
 static const u32 bcm63268_ephy_offsets[] = {4, 9, 14};
 
 static const struct b53_phy_info bcm63268_ephy_info = {
@@ -347,6 +356,8 @@ static int b53_mmap_probe(struct platform_device *pdev)
 		    pdata->chip_id == BCM6328_DEVICE_ID ||
 		    pdata->chip_id == BCM6362_DEVICE_ID)
 			priv->phy_info = &bcm6318_ephy_info;
+		else if (pdata->chip_id == BCM6368_DEVICE_ID)
+			priv->phy_info = &bcm6368_ephy_info;
 		else if (pdata->chip_id == BCM63268_DEVICE_ID)
 			priv->phy_info = &bcm63268_ephy_info;
 	}
-- 
2.43.0

[PATCH net-next v2 7/7] net: dsa: b53: mmap: Implement bcm63xx ephy power control

[Kyle Hendry]

Implement the phy enable/disable calls for b53 mmap, and
set the power down registers in the ephy control register
appropriately.

Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
---
 drivers/net/dsa/b53/b53_mmap.c | 50 ++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/drivers/net/dsa/b53/b53_mmap.c b/drivers/net/dsa/b53/b53_mmap.c
index 8f5914e2a790..f06c3e0cc42a 100644
--- a/drivers/net/dsa/b53/b53_mmap.c
+++ b/drivers/net/dsa/b53/b53_mmap.c
@@ -24,9 +24,12 @@
 #include <linux/mfd/syscon.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/b53.h>
+#include <linux/regmap.h>
 
 #include "b53_priv.h"
 
+#define BCM63XX_EPHY_REG 0x3C
+
 struct b53_phy_info {
 	u32 ephy_enable_mask;
 	u32 ephy_port_mask;
@@ -38,6 +41,7 @@ struct b53_mmap_priv {
 	void __iomem *regs;
 	struct regmap *gpio_ctrl;
 	const struct b53_phy_info *phy_info;
+	u32 phys_enabled;
 };
 
 static const u32 bcm6318_ephy_offsets[] = {4, 5, 6, 7};
@@ -266,6 +270,50 @@ static int b53_mmap_phy_write16(struct b53_device *dev, int addr, int reg,
 	return -EIO;
 }
 
+static int bcm63xx_ephy_set(struct b53_device *dev, int port, bool enable)
+{
+	struct b53_mmap_priv *priv = dev->priv;
+	const struct b53_phy_info *info = priv->phy_info;
+	struct regmap *gpio_ctrl = priv->gpio_ctrl;
+	u32 mask, val;
+
+	if (enable) {
+		mask = (info->ephy_enable_mask << info->ephy_offset[port])
+				| BIT(info->ephy_bias_bit);
+		val = 0;
+	} else {
+		mask = (info->ephy_enable_mask << info->ephy_offset[port]);
+		if (!((priv->phys_enabled & ~BIT(port)) & info->ephy_port_mask))
+			mask |= BIT(info->ephy_bias_bit);
+		val = mask;
+	}
+	return regmap_update_bits(gpio_ctrl, BCM63XX_EPHY_REG, mask, val);
+}
+
+static void b53_mmap_phy_enable(struct b53_device *dev, int port)
+{
+	struct b53_mmap_priv *priv = dev->priv;
+	int ret = 0;
+
+	if (priv->phy_info && (BIT(port) & priv->phy_info->ephy_port_mask))
+		ret = bcm63xx_ephy_set(dev, port, true);
+
+	if (!ret)
+		priv->phys_enabled |= BIT(port);
+}
+
+static void b53_mmap_phy_disable(struct b53_device *dev, int port)
+{
+	struct b53_mmap_priv *priv = dev->priv;
+	int ret = 0;
+
+	if (priv->phy_info && (BIT(port) & priv->phy_info->ephy_port_mask))
+		ret = bcm63xx_ephy_set(dev, port, false);
+
+	if (!ret)
+		priv->phys_enabled &= ~BIT(port);
+}
+
 static const struct b53_io_ops b53_mmap_ops = {
 	.read8 = b53_mmap_read8,
 	.read16 = b53_mmap_read16,
@@ -279,6 +327,8 @@ static const struct b53_io_ops b53_mmap_ops = {
 	.write64 = b53_mmap_write64,
 	.phy_read16 = b53_mmap_phy_read16,
 	.phy_write16 = b53_mmap_phy_write16,
+	.phy_enable = b53_mmap_phy_enable,
+	.phy_disable = b53_mmap_phy_disable,
 };
 
 static int b53_mmap_probe_of(struct platform_device *pdev,
-- 
2.43.0

Re: [PATCH net-next v2 2/7] dt-bindings: net: dsa: b53: Document brcm,gpio-ctrl property

[Rob Herring (Arm)]

On Wed, 23 Jul 2025 20:52:41 -0700, Kyle Hendry wrote:
> Add description for bcm63xx gpio-ctrl phandle which allows
> access to registers that control phy functionality.
> 
> Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
> ---
>  Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)
> 

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

Re: [PATCH net-next v2 4/7] net: dsa: b53: mmap: Add syscon reference and register layout for bcm63268

[Florian Fainelli]

On 7/23/25 20:52, Kyle Hendry wrote:
> On bcm63xx SoCs there are registers that control the PHYs in
> the GPIO controller. Allow the b53 driver to access them
> by passing in the syscon through the device tree.
> 
> Add a structure to describe the ephy control register
> and add register info for bcm63268.
> 
> Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH net-next v2 5/7] net: dsa: b53: mmap: Add register layout for bcm6318

[Florian Fainelli]

On 7/23/25 20:52, Kyle Hendry wrote:
> Add ephy register info for bcm6318, which also applies to
> bcm6328 and bcm6362.
> 
> Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH net-next v2 6/7] net: dsa: b53: mmap: Add register layout for bcm6368

[Florian Fainelli]

On 7/23/25 20:52, Kyle Hendry wrote:
> Add ephy register info for bcm6368.
> 
> Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH net-next v2 7/7] net: dsa: b53: mmap: Implement bcm63xx ephy power control

[Florian Fainelli]

On 7/23/25 20:52, Kyle Hendry wrote:
> Implement the phy enable/disable calls for b53 mmap, and
> set the power down registers in the ephy control register
> appropriately.
> 
> Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH net-next v2 0/7] net: dsa: b53: mmap: Add bcm63xx EPHY power control

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@kernel.org>:

On Wed, 23 Jul 2025 20:52:39 -0700 you wrote:
> The gpio controller on some bcm63xx SoCs has a register for
> controlling functionality of the internal fast ethernet phys.
> These patches allow the b53 driver to enable/disable phy
> power.
> 
> The register also contains reset bits which will be set by
> a reset driver in another patch series:
> https://lore.kernel.org/all/20250715234605.36216-1-kylehendrydev@gmail.com/
> 
> [...]

Here is the summary with links:
  - [net-next,v2,1/7] net: dsa: b53: Add phy_enable(), phy_disable() methods
    https://git.kernel.org/netdev/net-next/c/be7a79145d85
  - [net-next,v2,2/7] dt-bindings: net: dsa: b53: Document brcm,gpio-ctrl property
    https://git.kernel.org/netdev/net-next/c/cce3563875c7
  - [net-next,v2,3/7] net: dsa: b53: Define chip IDs for more bcm63xx SoCs
    https://git.kernel.org/netdev/net-next/c/fcf02a462fab
  - [net-next,v2,4/7] net: dsa: b53: mmap: Add syscon reference and register layout for bcm63268
    https://git.kernel.org/netdev/net-next/c/aed2aaa3c963
  - [net-next,v2,5/7] net: dsa: b53: mmap: Add register layout for bcm6318
    https://git.kernel.org/netdev/net-next/c/c251304ab021
  - [net-next,v2,6/7] net: dsa: b53: mmap: Add register layout for bcm6368
    https://git.kernel.org/netdev/net-next/c/e8e13073dff7
  - [net-next,v2,7/7] net: dsa: b53: mmap: Implement bcm63xx ephy power control
    https://git.kernel.org/netdev/net-next/c/5ac00023852d

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html