[PATCH net-next v2] net: phy: marvell: Fix 88e1510 downshift counter errata

[PATCH net-next v2] net: phy: marvell: Fix 88e1510 downshift counter errata

[Rohan G Thomas via B4 Relay]

From: Rohan G Thomas <rohan.g.thomas@altera.com>

The 88e1510 PHY has an erratum where the phy downshift counter is not
cleared after phy being suspended(BMCR_PDOWN set) and then later
resumed(BMCR_PDOWN cleared). This can cause the gigabit link to
intermittently downshift to a lower speed.

Disabling and re-enabling the downshift feature clears the counter,
allowing the PHY to retry gigabit link negotiation up to the programmed
retry count times before downshifting. This behavior has been observed
on copper links.

Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
Changes in v2:
- Updated commit message and function description.
- Link to v1: https://lore.kernel.org/r/20250902-marvell_fix-v1-1-9fba7a6147dd@altera.com
---
 drivers/net/phy/marvell.c | 39 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 38 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 623292948fa706a2b0d8b98919ead8b609bbd949..0ea366c1217eb3a6ddc26a8333280c211bd9545c 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -1902,6 +1902,43 @@ static int marvell_resume(struct phy_device *phydev)
 	return err;
 }
 
+/* m88e1510_resume
+ *
+ * The 88e1510 PHY has an erratum where the phy downshift counter is not cleared
+ * after phy being suspended(BMCR_PDOWN set) and then later resumed(BMCR_PDOWN
+ * cleared). This can cause the link to intermittently downshift to a lower speed.
+ *
+ * Disabling and re-enabling the downshift feature clears the counter, allowing
+ * the PHY to retry gigabit link negotiation up to the programmed retry count
+ * before downshifting. This behavior has been observed on copper links.
+ */
+static int m88e1510_resume(struct phy_device *phydev)
+{
+	int err;
+	u8 cnt = 0;
+
+	err = marvell_resume(phydev);
+	if (err < 0)
+		return err;
+
+	/* read downshift counter value */
+	err = m88e1011_get_downshift(phydev, &cnt);
+	if (err < 0)
+		return err;
+
+	if (cnt) {
+		/* downshift disabled */
+		err = m88e1011_set_downshift(phydev, 0);
+		if (err < 0)
+			return err;
+
+		/* downshift enabled, with previous counter value */
+		err = m88e1011_set_downshift(phydev, cnt);
+	}
+
+	return err;
+}
+
 static int marvell_aneg_done(struct phy_device *phydev)
 {
 	int retval = phy_read(phydev, MII_M1011_PHY_STATUS);
@@ -3923,7 +3960,7 @@ static struct phy_driver marvell_drivers[] = {
 		.handle_interrupt = marvell_handle_interrupt,
 		.get_wol = m88e1318_get_wol,
 		.set_wol = m88e1318_set_wol,
-		.resume = marvell_resume,
+		.resume = m88e1510_resume,
 		.suspend = marvell_suspend,
 		.read_page = marvell_read_page,
 		.write_page = marvell_write_page,

---
base-commit: 2fd4161d0d2547650d9559d57fc67b4e0a26a9e3
change-id: 20250902-marvell_fix-3f2a3d5e0fca

Best regards,
-- 
Rohan G Thomas <rohan.g.thomas@altera.com>

Re: [PATCH net-next v2] net: phy: marvell: Fix 88e1510 downshift counter errata

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@kernel.org>:

On Sat, 06 Sep 2025 10:33:31 +0800 you wrote:
> From: Rohan G Thomas <rohan.g.thomas@altera.com>
> 
> The 88e1510 PHY has an erratum where the phy downshift counter is not
> cleared after phy being suspended(BMCR_PDOWN set) and then later
> resumed(BMCR_PDOWN cleared). This can cause the gigabit link to
> intermittently downshift to a lower speed.
> 
> [...]

Here is the summary with links:
  - [net-next,v2] net: phy: marvell: Fix 88e1510 downshift counter errata
    https://git.kernel.org/netdev/net-next/c/deb105f49879

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html