[PATCH net 00/13][pull request] Intel Wired LAN Driver Updates 2026-01-06 (idpf)

[PATCH net 00/13][pull request] Intel Wired LAN Driver Updates 2026-01-06 (idpf)

[Tony Nguyen]

This series contains updates to idpf driver only.

Emil fixes issues related to resets; among them timeouts, NULL pointer
dereferences, and memory leaks.

Sreedevi resolves issues around RSS; mainly involving operations when
the interface is down and resets. She also addresses some incomplete
cleanups for ntuple filters and interrupts.

Erik fixes incomplete output of ntuple filters.

Josh sets restriction of Rx buffer size to follow hardware restrictions.

Larysa adds check to prevent NULL pointer dereference when RDMA is not
enabled.
---
Note: Patch 3 may be flagged by AI review may as a possible NULL pointer
dereference on the netdev, however, with patch 1 and 5 the netdevs are not
passed to the service task as NULL [1].

[1] https://lore.kernel.org/intel-wired-lan/3e9dc8fd-9052-4c53-ba40-5904306d09fb@intel.com/

The following are changes since commit 238e03d0466239410b72294b79494e43d4fabe77:
  net: fix memory leak in skb_segment_list for GRO packets
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue 200GbE

Emil Tantilov (5):
  idpf: keep the netdev when a reset fails
  idpf: detach and close netdevs while handling a reset
  idpf: fix memory leak in idpf_vport_rel()
  idpf: fix memory leak in idpf_vc_core_deinit()
  idpf: fix error handling in the init_task on load

Erik Gabriel Carrillo (1):
  idpf: fix issue with ethtool -n command display

Joshua Hay (1):
  idpf: cap maximum Rx buffer size

Larysa Zaremba (1):
  idpf: fix aux device unplugging when rdma is not supported by vport

Sreedevi Joshi (5):
  idpf: fix memory leak of flow steer list on rmmod
  idpf: Fix RSS LUT NULL pointer crash on early ethtool operations
  idpf: Fix RSS LUT configuration on down interfaces
  idpf: Fix RSS LUT NULL ptr issue after soft reset
  idpf: Fix error handling in idpf_vport_open()

 drivers/net/ethernet/intel/idpf/idpf.h        |   7 +-
 .../net/ethernet/intel/idpf/idpf_ethtool.c    |  92 ++++--
 drivers/net/ethernet/intel/idpf/idpf_idc.c    |   2 +-
 drivers/net/ethernet/intel/idpf/idpf_lib.c    | 274 ++++++++++--------
 drivers/net/ethernet/intel/idpf/idpf_txrx.c   |  46 ++-
 drivers/net/ethernet/intel/idpf/idpf_txrx.h   |   6 +-
 .../net/ethernet/intel/idpf/idpf_virtchnl.c   |  13 +-
 7 files changed, 256 insertions(+), 184 deletions(-)

-- 
2.47.1

[PATCH net 01/13] idpf: keep the netdev when a reset fails

[Tony Nguyen]

From: Emil Tantilov <emil.s.tantilov@intel.com>

During a successful reset the driver would re-allocate vport resources
while keeping the netdevs intact. However, in case of an error in the
init task, the netdev of the failing vport will be unregistered,
effectively removing the network interface:

[  121.211076] idpf 0000:83:00.0: enabling device (0100 -> 0102)
[  121.221976] idpf 0000:83:00.0: Device HW Reset initiated
[  124.161229] idpf 0000:83:00.0 ens801f0: renamed from eth0
[  124.163364] idpf 0000:83:00.0 ens801f0d1: renamed from eth1
[  125.934656] idpf 0000:83:00.0 ens801f0d2: renamed from eth2
[  128.218429] idpf 0000:83:00.0 ens801f0d3: renamed from eth3

ip -br a
ens801f0         UP
ens801f0d1       UP
ens801f0d2       UP
ens801f0d3       UP
echo 1 > /sys/class/net/ens801f0/device/reset

[  145.885537] idpf 0000:83:00.0: resetting
[  145.990280] idpf 0000:83:00.0: reset done
[  146.284766] idpf 0000:83:00.0: HW reset detected
[  146.296610] idpf 0000:83:00.0: Device HW Reset initiated
[  211.556719] idpf 0000:83:00.0: Transaction timed-out (op:526 cookie:7700 vc_op:526 salt:77 timeout:60000ms)
[  272.996705] idpf 0000:83:00.0: Transaction timed-out (op:502 cookie:7800 vc_op:502 salt:78 timeout:60000ms)

ip -br a
ens801f0d1       DOWN
ens801f0d2       DOWN
ens801f0d3       DOWN

Re-shuffle the logic in the error path of the init task to make sure the
netdevs remain intact. This will allow the driver to attempt recovery via
subsequent resets, provided the FW is still functional.

The main change is to make sure that idpf_decfg_netdev() is not called
should the init task fail during a reset. The error handling is
consolidated under unwind_vports, as the removed labels had the same
cleanup logic split depending on the point of failure.

Fixes: ce1b75d0635c ("idpf: add ptypes and MAC filter support")
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/idpf/idpf_lib.c | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/intel/idpf/idpf_lib.c b/drivers/net/ethernet/intel/idpf/idpf_lib.c
index 7ce4eb71a433..313803c08847 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_lib.c
+++ b/drivers/net/ethernet/intel/idpf/idpf_lib.c
@@ -1579,6 +1579,10 @@ void idpf_init_task(struct work_struct *work)
 		goto unwind_vports;
 	}
 
+	err = idpf_send_get_rx_ptype_msg(vport);
+	if (err)
+		goto unwind_vports;
+
 	index = vport->idx;
 	vport_config = adapter->vport_config[index];
 
@@ -1590,15 +1594,11 @@ void idpf_init_task(struct work_struct *work)
 	err = idpf_check_supported_desc_ids(vport);
 	if (err) {
 		dev_err(&pdev->dev, "failed to get required descriptor ids\n");
-		goto cfg_netdev_err;
+		goto unwind_vports;
 	}
 
 	if (idpf_cfg_netdev(vport))
-		goto cfg_netdev_err;
-
-	err = idpf_send_get_rx_ptype_msg(vport);
-	if (err)
-		goto handle_err;
+		goto unwind_vports;
 
 	/* Once state is put into DOWN, driver is ready for dev_open */
 	np = netdev_priv(vport->netdev);
@@ -1645,11 +1645,6 @@ void idpf_init_task(struct work_struct *work)
 
 	return;
 
-handle_err:
-	idpf_decfg_netdev(vport);
-cfg_netdev_err:
-	idpf_vport_rel(vport);
-	adapter->vports[index] = NULL;
 unwind_vports:
 	if (default_vport) {
 		for (index = 0; index < adapter->max_vports; index++) {
-- 
2.47.1

[PATCH net 02/13] idpf: detach and close netdevs while handling a reset

[Tony Nguyen]

From: Emil Tantilov <emil.s.tantilov@intel.com>

Protect the reset path from callbacks by setting the netdevs to detached
state and close any netdevs in UP state until the reset handling has
completed. During a reset, the driver will de-allocate resources for the
vport, and there is no guarantee that those will recover, which is why the
existing vport_ctrl_lock does not provide sufficient protection.

idpf_detach_and_close() is called right before reset handling. If the
reset handling succeeds, the netdevs state is recovered via call to
idpf_attach_and_open(). If the reset handling fails the netdevs remain
down. The detach/down calls are protected with RTNL lock to avoid racing
with callbacks. On the recovery side the attach can be done without
holding the RTNL lock as there are no callbacks expected at that point,
due to detach/close always being done first in that flow.

The previous logic restoring the netdevs state based on the
IDPF_VPORT_UP_REQUESTED flag in the init task is not needed anymore, hence
the removal of idpf_set_vport_state(). The IDPF_VPORT_UP_REQUESTED is
still being used to restore the state of the netdevs following the reset,
but has no use outside of the reset handling flow.

idpf_init_hard_reset() is converted to void, since it was used as such and
there is no error handling being done based on its return value.

Before this change, invoking hard and soft resets simultaneously will
cause the driver to lose the vport state:
ip -br a
<inf>	UP
echo 1 > /sys/class/net/ens801f0/device/reset& \
ethtool -L ens801f0 combined 8
ip -br a
<inf>	DOWN
ip link set <inf> up
ip -br a
<inf>	DOWN

Also in case of a failure in the reset path, the netdev is left
exposed to external callbacks, while vport resources are not
initialized, leading to a crash on subsequent ifup/down:
[408471.398966] idpf 0000:83:00.0: HW reset detected
[408471.411744] idpf 0000:83:00.0: Device HW Reset initiated
[408472.277901] idpf 0000:83:00.0: The driver was unable to contact the device's firmware. Check that the FW is running. Driver state= 0x2
[408508.125551] BUG: kernel NULL pointer dereference, address: 0000000000000078
[408508.126112] #PF: supervisor read access in kernel mode
[408508.126687] #PF: error_code(0x0000) - not-present page
[408508.127256] PGD 2aae2f067 P4D 0
[408508.127824] Oops: Oops: 0000 [#1] SMP NOPTI
...
[408508.130871] RIP: 0010:idpf_stop+0x39/0x70 [idpf]
...
[408508.139193] Call Trace:
[408508.139637]  <TASK>
[408508.140077]  __dev_close_many+0xbb/0x260
[408508.140533]  __dev_change_flags+0x1cf/0x280
[408508.140987]  netif_change_flags+0x26/0x70
[408508.141434]  dev_change_flags+0x3d/0xb0
[408508.141878]  devinet_ioctl+0x460/0x890
[408508.142321]  inet_ioctl+0x18e/0x1d0
[408508.142762]  ? _copy_to_user+0x22/0x70
[408508.143207]  sock_do_ioctl+0x3d/0xe0
[408508.143652]  sock_ioctl+0x10e/0x330
[408508.144091]  ? find_held_lock+0x2b/0x80
[408508.144537]  __x64_sys_ioctl+0x96/0xe0
[408508.144979]  do_syscall_64+0x79/0x3d0
[408508.145415]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[408508.145860] RIP: 0033:0x7f3e0bb4caff

Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration")
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/idpf/idpf_lib.c | 121 ++++++++++++---------
 1 file changed, 72 insertions(+), 49 deletions(-)

diff --git a/drivers/net/ethernet/intel/idpf/idpf_lib.c b/drivers/net/ethernet/intel/idpf/idpf_lib.c
index 313803c08847..a964e0f5891e 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_lib.c
+++ b/drivers/net/ethernet/intel/idpf/idpf_lib.c
@@ -729,6 +729,65 @@ static int idpf_init_mac_addr(struct idpf_vport *vport,
 	return 0;
 }
 
+static void idpf_detach_and_close(struct idpf_adapter *adapter)
+{
+	int max_vports = adapter->max_vports;
+
+	for (int i = 0; i < max_vports; i++) {
+		struct net_device *netdev = adapter->netdevs[i];
+
+		/* If the interface is in detached state, that means the
+		 * previous reset was not handled successfully for this
+		 * vport.
+		 */
+		if (!netif_device_present(netdev))
+			continue;
+
+		/* Hold RTNL to protect racing with callbacks */
+		rtnl_lock();
+		netif_device_detach(netdev);
+		if (netif_running(netdev)) {
+			set_bit(IDPF_VPORT_UP_REQUESTED,
+				adapter->vport_config[i]->flags);
+			dev_close(netdev);
+		}
+		rtnl_unlock();
+	}
+}
+
+static void idpf_attach_and_open(struct idpf_adapter *adapter)
+{
+	int max_vports = adapter->max_vports;
+
+	for (int i = 0; i < max_vports; i++) {
+		struct idpf_vport *vport = adapter->vports[i];
+		struct idpf_vport_config *vport_config;
+		struct net_device *netdev;
+
+		/* In case of a critical error in the init task, the vport
+		 * will be freed. Only continue to restore the netdevs
+		 * if the vport is allocated.
+		 */
+		if (!vport)
+			continue;
+
+		/* No need for RTNL on attach as this function is called
+		 * following detach and dev_close(). We do take RTNL for
+		 * dev_open() below as it can race with external callbacks
+		 * following the call to netif_device_attach().
+		 */
+		netdev = adapter->netdevs[i];
+		netif_device_attach(netdev);
+		vport_config = adapter->vport_config[vport->idx];
+		if (test_and_clear_bit(IDPF_VPORT_UP_REQUESTED,
+				       vport_config->flags)) {
+			rtnl_lock();
+			dev_open(netdev, NULL);
+			rtnl_unlock();
+		}
+	}
+}
+
 /**
  * idpf_cfg_netdev - Allocate, configure and register a netdev
  * @vport: main vport structure
@@ -1041,10 +1100,11 @@ static void idpf_vport_dealloc(struct idpf_vport *vport)
 	idpf_idc_deinit_vport_aux_device(vport->vdev_info);
 
 	idpf_deinit_mac_addr(vport);
-	idpf_vport_stop(vport, true);
 
-	if (!test_bit(IDPF_HR_RESET_IN_PROG, adapter->flags))
+	if (!test_bit(IDPF_HR_RESET_IN_PROG, adapter->flags)) {
+		idpf_vport_stop(vport, true);
 		idpf_decfg_netdev(vport);
+	}
 	if (test_bit(IDPF_REMOVE_IN_PROG, adapter->flags))
 		idpf_del_all_mac_filters(vport);
 
@@ -1544,7 +1604,6 @@ void idpf_init_task(struct work_struct *work)
 	struct idpf_vport_config *vport_config;
 	struct idpf_vport_max_q max_q;
 	struct idpf_adapter *adapter;
-	struct idpf_netdev_priv *np;
 	struct idpf_vport *vport;
 	u16 num_default_vports;
 	struct pci_dev *pdev;
@@ -1600,12 +1659,6 @@ void idpf_init_task(struct work_struct *work)
 	if (idpf_cfg_netdev(vport))
 		goto unwind_vports;
 
-	/* Once state is put into DOWN, driver is ready for dev_open */
-	np = netdev_priv(vport->netdev);
-	clear_bit(IDPF_VPORT_UP, np->state);
-	if (test_and_clear_bit(IDPF_VPORT_UP_REQUESTED, vport_config->flags))
-		idpf_vport_open(vport, true);
-
 	/* Spawn and return 'idpf_init_task' work queue until all the
 	 * default vports are created
 	 */
@@ -1781,27 +1834,6 @@ static int idpf_check_reset_complete(struct idpf_hw *hw,
 	return -EBUSY;
 }
 
-/**
- * idpf_set_vport_state - Set the vport state to be after the reset
- * @adapter: Driver specific private structure
- */
-static void idpf_set_vport_state(struct idpf_adapter *adapter)
-{
-	u16 i;
-
-	for (i = 0; i < adapter->max_vports; i++) {
-		struct idpf_netdev_priv *np;
-
-		if (!adapter->netdevs[i])
-			continue;
-
-		np = netdev_priv(adapter->netdevs[i]);
-		if (test_bit(IDPF_VPORT_UP, np->state))
-			set_bit(IDPF_VPORT_UP_REQUESTED,
-				adapter->vport_config[i]->flags);
-	}
-}
-
 /**
  * idpf_init_hard_reset - Initiate a hardware reset
  * @adapter: Driver specific private structure
@@ -1810,28 +1842,17 @@ static void idpf_set_vport_state(struct idpf_adapter *adapter)
  * reallocate. Also reinitialize the mailbox. Return 0 on success,
  * negative on failure.
  */
-static int idpf_init_hard_reset(struct idpf_adapter *adapter)
+static void idpf_init_hard_reset(struct idpf_adapter *adapter)
 {
 	struct idpf_reg_ops *reg_ops = &adapter->dev_ops.reg_ops;
 	struct device *dev = &adapter->pdev->dev;
-	struct net_device *netdev;
 	int err;
-	u16 i;
 
+	idpf_detach_and_close(adapter);
 	mutex_lock(&adapter->vport_ctrl_lock);
 
 	dev_info(dev, "Device HW Reset initiated\n");
 
-	/* Avoid TX hangs on reset */
-	for (i = 0; i < adapter->max_vports; i++) {
-		netdev = adapter->netdevs[i];
-		if (!netdev)
-			continue;
-
-		netif_carrier_off(netdev);
-		netif_tx_disable(netdev);
-	}
-
 	/* Prepare for reset */
 	if (test_and_clear_bit(IDPF_HR_DRV_LOAD, adapter->flags)) {
 		reg_ops->trigger_reset(adapter, IDPF_HR_DRV_LOAD);
@@ -1840,7 +1861,6 @@ static int idpf_init_hard_reset(struct idpf_adapter *adapter)
 
 		idpf_idc_issue_reset_event(adapter->cdev_info);
 
-		idpf_set_vport_state(adapter);
 		idpf_vc_core_deinit(adapter);
 		if (!is_reset)
 			reg_ops->trigger_reset(adapter, IDPF_HR_FUNC_RESET);
@@ -1887,11 +1907,14 @@ static int idpf_init_hard_reset(struct idpf_adapter *adapter)
 unlock_mutex:
 	mutex_unlock(&adapter->vport_ctrl_lock);
 
-	/* Wait until all vports are created to init RDMA CORE AUX */
-	if (!err)
-		err = idpf_idc_init(adapter);
-
-	return err;
+	/* Attempt to restore netdevs and initialize RDMA CORE AUX device,
+	 * provided vc_core_init succeeded. It is still possible that
+	 * vports are not allocated at this point if the init task failed.
+	 */
+	if (!err) {
+		idpf_attach_and_open(adapter);
+		idpf_idc_init(adapter);
+	}
 }
 
 /**
-- 
2.47.1

[PATCH net 03/13] idpf: fix memory leak in idpf_vport_rel()

[Tony Nguyen]

From: Emil Tantilov <emil.s.tantilov@intel.com>

Free vport->rx_ptype_lkup in idpf_vport_rel() to avoid leaking memory
during a reset. Reported by kmemleak:

unreferenced object 0xff450acac838a000 (size 4096):
  comm "kworker/u258:5", pid 7732, jiffies 4296830044
  hex dump (first 32 bytes):
    00 00 00 00 00 10 00 00 00 10 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00  ................
  backtrace (crc 3da81902):
    __kmalloc_cache_noprof+0x469/0x7a0
    idpf_send_get_rx_ptype_msg+0x90/0x570 [idpf]
    idpf_init_task+0x1ec/0x8d0 [idpf]
    process_one_work+0x226/0x6d0
    worker_thread+0x19e/0x340
    kthread+0x10f/0x250
    ret_from_fork+0x251/0x2b0
    ret_from_fork_asm+0x1a/0x30

Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration")
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/idpf/idpf_lib.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/intel/idpf/idpf_lib.c b/drivers/net/ethernet/intel/idpf/idpf_lib.c
index a964e0f5891e..04af10cfaa8c 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_lib.c
+++ b/drivers/net/ethernet/intel/idpf/idpf_lib.c
@@ -1082,6 +1082,8 @@ static void idpf_vport_rel(struct idpf_vport *vport)
 		kfree(adapter->vport_config[idx]->req_qs_chunks);
 		adapter->vport_config[idx]->req_qs_chunks = NULL;
 	}
+	kfree(vport->rx_ptype_lkup);
+	vport->rx_ptype_lkup = NULL;
 	kfree(vport);
 	adapter->num_alloc_vports--;
 }
-- 
2.47.1

[PATCH net 04/13] idpf: fix memory leak in idpf_vc_core_deinit()

[Tony Nguyen]

From: Emil Tantilov <emil.s.tantilov@intel.com>

Make sure to free hw->lan_regs. Reported by kmemleak during reset:

unreferenced object 0xff1b913d02a936c0 (size 96):
  comm "kworker/u258:14", pid 2174, jiffies 4294958305
  hex dump (first 32 bytes):
    00 00 00 c0 a8 ba 2d ff 00 00 00 00 00 00 00 00  ......-.........
    00 00 40 08 00 00 00 00 00 00 25 b3 a8 ba 2d ff  ..@.......%...-.
  backtrace (crc 36063c4f):
    __kmalloc_noprof+0x48f/0x890
    idpf_vc_core_init+0x6ce/0x9b0 [idpf]
    idpf_vc_event_task+0x1fb/0x350 [idpf]
    process_one_work+0x226/0x6d0
    worker_thread+0x19e/0x340
    kthread+0x10f/0x250
    ret_from_fork+0x251/0x2b0
    ret_from_fork_asm+0x1a/0x30

Fixes: 6aa53e861c1a ("idpf: implement get LAN MMIO memory regions")
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Joshua Hay <joshua.a.hay@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/idpf/idpf_virtchnl.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c b/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c
index 5bbe7d9294c1..01bbd12a642a 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c
+++ b/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c
@@ -3570,6 +3570,7 @@ int idpf_vc_core_init(struct idpf_adapter *adapter)
  */
 void idpf_vc_core_deinit(struct idpf_adapter *adapter)
 {
+	struct idpf_hw *hw = &adapter->hw;
 	bool remove_in_prog;
 
 	if (!test_bit(IDPF_VC_CORE_INIT, adapter->flags))
@@ -3593,6 +3594,9 @@ void idpf_vc_core_deinit(struct idpf_adapter *adapter)
 
 	idpf_vport_params_buf_rel(adapter);
 
+	kfree(hw->lan_regs);
+	hw->lan_regs = NULL;
+
 	kfree(adapter->vports);
 	adapter->vports = NULL;
 
-- 
2.47.1

[PATCH net 05/13] idpf: fix error handling in the init_task on load

[Tony Nguyen]

From: Emil Tantilov <emil.s.tantilov@intel.com>

If the init_task fails during a driver load, we end up without vports and
netdevs, effectively failing the entire process. In that state a
subsequent reset will result in a crash as the service task attempts to
access uninitialized resources. Following trace is from an error in the
init_task where the CREATE_VPORT (op 501) is rejected by the FW:

[40922.763136] idpf 0000:83:00.0: Device HW Reset initiated
[40924.449797] idpf 0000:83:00.0: Transaction failed (op 501)
[40958.148190] idpf 0000:83:00.0: HW reset detected
[40958.161202] BUG: kernel NULL pointer dereference, address: 00000000000000a8
...
[40958.168094] Workqueue: idpf-0000:83:00.0-vc_event idpf_vc_event_task [idpf]
[40958.168865] RIP: 0010:idpf_vc_event_task+0x9b/0x350 [idpf]
...
[40958.177932] Call Trace:
[40958.178491]  <TASK>
[40958.179040]  process_one_work+0x226/0x6d0
[40958.179609]  worker_thread+0x19e/0x340
[40958.180158]  ? __pfx_worker_thread+0x10/0x10
[40958.180702]  kthread+0x10f/0x250
[40958.181238]  ? __pfx_kthread+0x10/0x10
[40958.181774]  ret_from_fork+0x251/0x2b0
[40958.182307]  ? __pfx_kthread+0x10/0x10
[40958.182834]  ret_from_fork_asm+0x1a/0x30
[40958.183370]  </TASK>

Fix the error handling in the init_task to make sure the service and
mailbox tasks are disabled if the error happens during load. These are
started in idpf_vc_core_init(), which spawns the init_task and has no way
of knowing if it failed. If the error happens on reset, following
successful driver load, the tasks can still run, as that will allow the
netdevs to attempt recovery through another reset. Stop the PTP callbacks
either way as those will be restarted by the call to idpf_vc_core_init()
during a successful reset.

Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration")
Reported-by: Vivek Kumar <iamvivekkumar@google.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/idpf/idpf_lib.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/idpf/idpf_lib.c b/drivers/net/ethernet/intel/idpf/idpf_lib.c
index 04af10cfaa8c..e2ee8b137421 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_lib.c
+++ b/drivers/net/ethernet/intel/idpf/idpf_lib.c
@@ -1690,10 +1690,9 @@ void idpf_init_task(struct work_struct *work)
 		set_bit(IDPF_VPORT_REG_NETDEV, vport_config->flags);
 	}
 
-	/* As all the required vports are created, clear the reset flag
-	 * unconditionally here in case we were in reset and the link was down.
-	 */
+	/* Clear the reset and load bits as all vports are created */
 	clear_bit(IDPF_HR_RESET_IN_PROG, adapter->flags);
+	clear_bit(IDPF_HR_DRV_LOAD, adapter->flags);
 	/* Start the statistics task now */
 	queue_delayed_work(adapter->stats_wq, &adapter->stats_task,
 			   msecs_to_jiffies(10 * (pdev->devfn & 0x07)));
@@ -1707,6 +1706,15 @@ void idpf_init_task(struct work_struct *work)
 				idpf_vport_dealloc(adapter->vports[index]);
 		}
 	}
+	/* Cleanup after vc_core_init, which has no way of knowing the
+	 * init task failed on driver load.
+	 */
+	if (test_and_clear_bit(IDPF_HR_DRV_LOAD, adapter->flags)) {
+		cancel_delayed_work_sync(&adapter->serv_task);
+		cancel_delayed_work_sync(&adapter->mbx_task);
+	}
+	idpf_ptp_release(adapter);
+
 	clear_bit(IDPF_HR_RESET_IN_PROG, adapter->flags);
 }
 
@@ -1856,7 +1864,7 @@ static void idpf_init_hard_reset(struct idpf_adapter *adapter)
 	dev_info(dev, "Device HW Reset initiated\n");
 
 	/* Prepare for reset */
-	if (test_and_clear_bit(IDPF_HR_DRV_LOAD, adapter->flags)) {
+	if (test_bit(IDPF_HR_DRV_LOAD, adapter->flags)) {
 		reg_ops->trigger_reset(adapter, IDPF_HR_DRV_LOAD);
 	} else if (test_and_clear_bit(IDPF_HR_FUNC_RESET, adapter->flags)) {
 		bool is_reset = idpf_is_reset_detected(adapter);
-- 
2.47.1

[PATCH net 06/13] idpf: fix memory leak of flow steer list on rmmod

[Tony Nguyen]

From: Sreedevi Joshi <sreedevi.joshi@intel.com>

The flow steering list maintains entries that are added and removed as
ethtool creates and deletes flow steering rules. Module removal with active
entries causes memory leak as the list is not properly cleaned up.

Prevent this by iterating through the remaining entries in the list and
freeing the associated memory during module removal. Add a spinlock
(flow_steer_list_lock) to protect the list access from multiple threads.

Fixes: ada3e24b84a0 ("idpf: add flow steering support")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/idpf/idpf.h        |  2 ++
 .../net/ethernet/intel/idpf/idpf_ethtool.c    | 15 ++++++++--
 drivers/net/ethernet/intel/idpf/idpf_lib.c    | 28 ++++++++++++++++++-
 3 files changed, 42 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/idpf/idpf.h b/drivers/net/ethernet/intel/idpf/idpf.h
index 8cfc68cbfa06..a61821333f5d 100644
--- a/drivers/net/ethernet/intel/idpf/idpf.h
+++ b/drivers/net/ethernet/intel/idpf/idpf.h
@@ -558,6 +558,7 @@ struct idpf_vector_lifo {
  * @max_q: Maximum possible queues
  * @req_qs_chunks: Queue chunk data for requested queues
  * @mac_filter_list_lock: Lock to protect mac filters
+ * @flow_steer_list_lock: Lock to protect fsteer filters
  * @flags: See enum idpf_vport_config_flags
  */
 struct idpf_vport_config {
@@ -565,6 +566,7 @@ struct idpf_vport_config {
 	struct idpf_vport_max_q max_q;
 	struct virtchnl2_add_queues *req_qs_chunks;
 	spinlock_t mac_filter_list_lock;
+	spinlock_t flow_steer_list_lock;
 	DECLARE_BITMAP(flags, IDPF_VPORT_CONFIG_FLAGS_NBITS);
 };
 
diff --git a/drivers/net/ethernet/intel/idpf/idpf_ethtool.c b/drivers/net/ethernet/intel/idpf/idpf_ethtool.c
index 2589e124e41c..00481fec8179 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_ethtool.c
+++ b/drivers/net/ethernet/intel/idpf/idpf_ethtool.c
@@ -37,6 +37,7 @@ static int idpf_get_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd,
 {
 	struct idpf_netdev_priv *np = netdev_priv(netdev);
 	struct idpf_vport_user_config_data *user_config;
+	struct idpf_vport_config *vport_config;
 	struct idpf_fsteer_fltr *f;
 	struct idpf_vport *vport;
 	unsigned int cnt = 0;
@@ -44,7 +45,8 @@ static int idpf_get_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd,
 
 	idpf_vport_ctrl_lock(netdev);
 	vport = idpf_netdev_to_vport(netdev);
-	user_config = &np->adapter->vport_config[np->vport_idx]->user_config;
+	vport_config = np->adapter->vport_config[np->vport_idx];
+	user_config = &vport_config->user_config;
 
 	switch (cmd->cmd) {
 	case ETHTOOL_GRXCLSRLCNT:
@@ -53,15 +55,18 @@ static int idpf_get_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd,
 		break;
 	case ETHTOOL_GRXCLSRULE:
 		err = -EINVAL;
+		spin_lock_bh(&vport_config->flow_steer_list_lock);
 		list_for_each_entry(f, &user_config->flow_steer_list, list)
 			if (f->loc == cmd->fs.location) {
 				cmd->fs.ring_cookie = f->q_index;
 				err = 0;
 				break;
 			}
+		spin_unlock_bh(&vport_config->flow_steer_list_lock);
 		break;
 	case ETHTOOL_GRXCLSRLALL:
 		cmd->data = idpf_fsteer_max_rules(vport);
+		spin_lock_bh(&vport_config->flow_steer_list_lock);
 		list_for_each_entry(f, &user_config->flow_steer_list, list) {
 			if (cnt == cmd->rule_cnt) {
 				err = -EMSGSIZE;
@@ -72,6 +77,7 @@ static int idpf_get_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd,
 		}
 		if (!err)
 			cmd->rule_cnt = user_config->num_fsteer_fltrs;
+		spin_unlock_bh(&vport_config->flow_steer_list_lock);
 		break;
 	default:
 		break;
@@ -240,6 +246,7 @@ static int idpf_add_flow_steer(struct net_device *netdev,
 
 	fltr->loc = fsp->location;
 	fltr->q_index = q_index;
+	spin_lock_bh(&vport_config->flow_steer_list_lock);
 	list_for_each_entry(f, &user_config->flow_steer_list, list) {
 		if (f->loc >= fltr->loc)
 			break;
@@ -250,6 +257,7 @@ static int idpf_add_flow_steer(struct net_device *netdev,
 		 list_add(&fltr->list, &user_config->flow_steer_list);
 
 	user_config->num_fsteer_fltrs++;
+	spin_unlock_bh(&vport_config->flow_steer_list_lock);
 
 out:
 	kfree(rule);
@@ -302,17 +310,20 @@ static int idpf_del_flow_steer(struct net_device *netdev,
 		goto out;
 	}
 
+	spin_lock_bh(&vport_config->flow_steer_list_lock);
 	list_for_each_entry_safe(f, iter,
 				 &user_config->flow_steer_list, list) {
 		if (f->loc == fsp->location) {
 			list_del(&f->list);
 			kfree(f);
 			user_config->num_fsteer_fltrs--;
-			goto out;
+			goto out_unlock;
 		}
 	}
 	err = -EINVAL;
 
+out_unlock:
+	spin_unlock_bh(&vport_config->flow_steer_list_lock);
 out:
 	kfree(rule);
 	return err;
diff --git a/drivers/net/ethernet/intel/idpf/idpf_lib.c b/drivers/net/ethernet/intel/idpf/idpf_lib.c
index e2ee8b137421..d56366e676cf 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_lib.c
+++ b/drivers/net/ethernet/intel/idpf/idpf_lib.c
@@ -442,6 +442,29 @@ int idpf_intr_req(struct idpf_adapter *adapter)
 	return err;
 }
 
+/**
+ * idpf_del_all_flow_steer_filters - Delete all flow steer filters in list
+ * @vport: main vport struct
+ *
+ * Takes flow_steer_list_lock spinlock.  Deletes all filters
+ */
+static void idpf_del_all_flow_steer_filters(struct idpf_vport *vport)
+{
+	struct idpf_vport_config *vport_config;
+	struct idpf_fsteer_fltr *f, *ftmp;
+
+	vport_config = vport->adapter->vport_config[vport->idx];
+
+	spin_lock_bh(&vport_config->flow_steer_list_lock);
+	list_for_each_entry_safe(f, ftmp, &vport_config->user_config.flow_steer_list,
+				 list) {
+		list_del(&f->list);
+		kfree(f);
+	}
+	vport_config->user_config.num_fsteer_fltrs = 0;
+	spin_unlock_bh(&vport_config->flow_steer_list_lock);
+}
+
 /**
  * idpf_find_mac_filter - Search filter list for specific mac filter
  * @vconfig: Vport config structure
@@ -1107,8 +1130,10 @@ static void idpf_vport_dealloc(struct idpf_vport *vport)
 		idpf_vport_stop(vport, true);
 		idpf_decfg_netdev(vport);
 	}
-	if (test_bit(IDPF_REMOVE_IN_PROG, adapter->flags))
+	if (test_bit(IDPF_REMOVE_IN_PROG, adapter->flags)) {
 		idpf_del_all_mac_filters(vport);
+		idpf_del_all_flow_steer_filters(vport);
+	}
 
 	if (adapter->netdevs[i]) {
 		struct idpf_netdev_priv *np = netdev_priv(adapter->netdevs[i]);
@@ -1648,6 +1673,7 @@ void idpf_init_task(struct work_struct *work)
 	vport_config = adapter->vport_config[index];
 
 	spin_lock_init(&vport_config->mac_filter_list_lock);
+	spin_lock_init(&vport_config->flow_steer_list_lock);
 
 	INIT_LIST_HEAD(&vport_config->user_config.mac_filter_list);
 	INIT_LIST_HEAD(&vport_config->user_config.flow_steer_list);
-- 
2.47.1

[PATCH net 07/13] idpf: fix issue with ethtool -n command display

[Tony Nguyen]

From: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>

When ethtool -n is executed on an interface to display the flow steering
rules, "rxclass: Unknown flow type" error is generated.

The flow steering list maintained in the driver currently stores only the
location and q_index but other fields of the ethtool_rx_flow_spec are not
stored. This may be enough for the virtchnl command to delete the entry.
However, when the ethtool -n command is used to query the flow steering
rules, the ethtool_rx_flow_spec returned is not complete causing the
error below.

Resolve this by storing the flow spec (fsp) when rules are added and
returning the complete flow spec when rules are queried.

Also, change the return value from EINVAL to ENOENT when flow steering
entry is not found during query by location or when deleting an entry.

Add logic to detect and reject duplicate filter entries at the same
location and change logic to perform upfront validation of all error
conditions before adding flow rules through virtchnl. This avoids the
need for additional virtchnl delete messages when subsequent operations
fail, which was missing in the original upstream code.

Example:
Before the fix:
ethtool -n eth1
2 RX rings available
Total 2 rules

rxclass: Unknown flow type
rxclass: Unknown flow type

After the fix:
ethtool -n eth1
2 RX rings available
Total 2 rules

Filter: 0
        Rule Type: TCP over IPv4
        Src IP addr: 10.0.0.1 mask: 0.0.0.0
        Dest IP addr: 0.0.0.0 mask: 255.255.255.255
        TOS: 0x0 mask: 0xff
        Src port: 0 mask: 0xffff
        Dest port: 0 mask: 0xffff
        Action: Direct to queue 0

Filter: 1
        Rule Type: UDP over IPv4
        Src IP addr: 10.0.0.1 mask: 0.0.0.0
        Dest IP addr: 0.0.0.0 mask: 255.255.255.255
        TOS: 0x0 mask: 0xff
        Src port: 0 mask: 0xffff
        Dest port: 0 mask: 0xffff
        Action: Direct to queue 0

Fixes: ada3e24b84a0 ("idpf: add flow steering support")
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Co-developed-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/idpf/idpf.h        |  3 +-
 .../net/ethernet/intel/idpf/idpf_ethtool.c    | 59 ++++++++++++-------
 2 files changed, 40 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ethernet/intel/idpf/idpf.h b/drivers/net/ethernet/intel/idpf/idpf.h
index a61821333f5d..dab36c0c3cdc 100644
--- a/drivers/net/ethernet/intel/idpf/idpf.h
+++ b/drivers/net/ethernet/intel/idpf/idpf.h
@@ -284,8 +284,7 @@ struct idpf_port_stats {
 
 struct idpf_fsteer_fltr {
 	struct list_head list;
-	u32 loc;
-	u32 q_index;
+	struct ethtool_rx_flow_spec fs;
 };
 
 /**
diff --git a/drivers/net/ethernet/intel/idpf/idpf_ethtool.c b/drivers/net/ethernet/intel/idpf/idpf_ethtool.c
index 00481fec8179..7000f6283a33 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_ethtool.c
+++ b/drivers/net/ethernet/intel/idpf/idpf_ethtool.c
@@ -54,11 +54,15 @@ static int idpf_get_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd,
 		cmd->data = idpf_fsteer_max_rules(vport);
 		break;
 	case ETHTOOL_GRXCLSRULE:
-		err = -EINVAL;
+		err = -ENOENT;
 		spin_lock_bh(&vport_config->flow_steer_list_lock);
 		list_for_each_entry(f, &user_config->flow_steer_list, list)
-			if (f->loc == cmd->fs.location) {
-				cmd->fs.ring_cookie = f->q_index;
+			if (f->fs.location == cmd->fs.location) {
+				/* Avoid infoleak from padding: zero first,
+				 * then assign fields
+				 */
+				memset(&cmd->fs, 0, sizeof(cmd->fs));
+				cmd->fs = f->fs;
 				err = 0;
 				break;
 			}
@@ -72,7 +76,7 @@ static int idpf_get_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd,
 				err = -EMSGSIZE;
 				break;
 			}
-			rule_locs[cnt] = f->loc;
+			rule_locs[cnt] = f->fs.location;
 			cnt++;
 		}
 		if (!err)
@@ -174,7 +178,7 @@ static int idpf_add_flow_steer(struct net_device *netdev,
 	struct idpf_vport *vport;
 	u32 flow_type, q_index;
 	u16 num_rxq;
-	int err;
+	int err = 0;
 
 	vport = idpf_netdev_to_vport(netdev);
 	vport_config = vport->adapter->vport_config[np->vport_idx];
@@ -200,6 +204,29 @@ static int idpf_add_flow_steer(struct net_device *netdev,
 	if (!rule)
 		return -ENOMEM;
 
+	fltr = kzalloc(sizeof(*fltr), GFP_KERNEL);
+	if (!fltr) {
+		err = -ENOMEM;
+		goto out_free_rule;
+	}
+
+	/* detect duplicate entry and reject before adding rules */
+	spin_lock_bh(&vport_config->flow_steer_list_lock);
+	list_for_each_entry(f, &user_config->flow_steer_list, list) {
+		if (f->fs.location == fsp->location) {
+			err = -EEXIST;
+			break;
+		}
+
+		if (f->fs.location > fsp->location)
+			break;
+		parent = f;
+	}
+	spin_unlock_bh(&vport_config->flow_steer_list_lock);
+
+	if (err)
+		goto out;
+
 	rule->vport_id = cpu_to_le32(vport->vport_id);
 	rule->count = cpu_to_le32(1);
 	info = &rule->rule_info[0];
@@ -238,28 +265,20 @@ static int idpf_add_flow_steer(struct net_device *netdev,
 		goto out;
 	}
 
-	fltr = kzalloc(sizeof(*fltr), GFP_KERNEL);
-	if (!fltr) {
-		err = -ENOMEM;
-		goto out;
-	}
+	/* Save a copy of the user's flow spec so ethtool can later retrieve it */
+	fltr->fs = *fsp;
 
-	fltr->loc = fsp->location;
-	fltr->q_index = q_index;
 	spin_lock_bh(&vport_config->flow_steer_list_lock);
-	list_for_each_entry(f, &user_config->flow_steer_list, list) {
-		if (f->loc >= fltr->loc)
-			break;
-		parent = f;
-	}
-
 	parent ? list_add(&fltr->list, &parent->list) :
 		 list_add(&fltr->list, &user_config->flow_steer_list);
 
 	user_config->num_fsteer_fltrs++;
 	spin_unlock_bh(&vport_config->flow_steer_list_lock);
+	goto out_free_rule;
 
 out:
+	kfree(fltr);
+out_free_rule:
 	kfree(rule);
 	return err;
 }
@@ -313,14 +332,14 @@ static int idpf_del_flow_steer(struct net_device *netdev,
 	spin_lock_bh(&vport_config->flow_steer_list_lock);
 	list_for_each_entry_safe(f, iter,
 				 &user_config->flow_steer_list, list) {
-		if (f->loc == fsp->location) {
+		if (f->fs.location == fsp->location) {
 			list_del(&f->list);
 			kfree(f);
 			user_config->num_fsteer_fltrs--;
 			goto out_unlock;
 		}
 	}
-	err = -EINVAL;
+	err = -ENOENT;
 
 out_unlock:
 	spin_unlock_bh(&vport_config->flow_steer_list_lock);
-- 
2.47.1

[PATCH net 08/13] idpf: Fix RSS LUT NULL pointer crash on early ethtool operations

[Tony Nguyen]

From: Sreedevi Joshi <sreedevi.joshi@intel.com>

The RSS LUT is not initialized until the interface comes up, causing
the following NULL pointer crash when ethtool operations like rxhash on/off
are performed before the interface is brought up for the first time.

Move RSS LUT initialization from ndo_open to vport creation to ensure LUT
is always available. This enables RSS configuration via ethtool before
bringing the interface up. Simplify LUT management by maintaining all
changes in the driver's soft copy and programming zeros to the indirection
table when rxhash is disabled. Defer HW programming until the interface
comes up if it is down during rxhash and LUT configuration changes.

Steps to reproduce:
** Load idpf driver; interfaces will be created
	modprobe idpf
** Before bringing the interfaces up, turn rxhash off
	ethtool -K eth2 rxhash off

[89408.371875] BUG: kernel NULL pointer dereference, address: 0000000000000000
[89408.371908] #PF: supervisor read access in kernel mode
[89408.371924] #PF: error_code(0x0000) - not-present page
[89408.371940] PGD 0 P4D 0
[89408.371953] Oops: Oops: 0000 [#1] SMP NOPTI
<snip>
[89408.372052] RIP: 0010:memcpy_orig+0x16/0x130
[89408.372310] Call Trace:
[89408.372317]  <TASK>
[89408.372326]  ? idpf_set_features+0xfc/0x180 [idpf]
[89408.372363]  __netdev_update_features+0x295/0xde0
[89408.372384]  ethnl_set_features+0x15e/0x460
[89408.372406]  genl_family_rcv_msg_doit+0x11f/0x180
[89408.372429]  genl_rcv_msg+0x1ad/0x2b0
[89408.372446]  ? __pfx_ethnl_set_features+0x10/0x10
[89408.372465]  ? __pfx_genl_rcv_msg+0x10/0x10
[89408.372482]  netlink_rcv_skb+0x58/0x100
[89408.372502]  genl_rcv+0x2c/0x50
[89408.372516]  netlink_unicast+0x289/0x3e0
[89408.372533]  netlink_sendmsg+0x215/0x440
[89408.372551]  __sys_sendto+0x234/0x240
[89408.372571]  __x64_sys_sendto+0x28/0x30
[89408.372585]  x64_sys_call+0x1909/0x1da0
[89408.372604]  do_syscall_64+0x7a/0xfa0
[89408.373140]  ? clear_bhb_loop+0x60/0xb0
[89408.373647]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[89408.378887]  </TASK>
<snip>

Fixes: a251eee62133 ("idpf: add SRIOV support and other ndo_ops")
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/idpf/idpf.h        |  2 -
 drivers/net/ethernet/intel/idpf/idpf_lib.c    | 94 +++++++++----------
 drivers/net/ethernet/intel/idpf/idpf_txrx.c   | 36 +++----
 drivers/net/ethernet/intel/idpf/idpf_txrx.h   |  4 +-
 .../net/ethernet/intel/idpf/idpf_virtchnl.c   |  9 +-
 5 files changed, 66 insertions(+), 79 deletions(-)

diff --git a/drivers/net/ethernet/intel/idpf/idpf.h b/drivers/net/ethernet/intel/idpf/idpf.h
index dab36c0c3cdc..1bf7934d4e28 100644
--- a/drivers/net/ethernet/intel/idpf/idpf.h
+++ b/drivers/net/ethernet/intel/idpf/idpf.h
@@ -423,14 +423,12 @@ enum idpf_user_flags {
  * @rss_key: RSS hash key
  * @rss_lut_size: Size of RSS lookup table
  * @rss_lut: RSS lookup table
- * @cached_lut: Used to restore previously init RSS lut
  */
 struct idpf_rss_data {
 	u16 rss_key_size;
 	u8 *rss_key;
 	u16 rss_lut_size;
 	u32 *rss_lut;
-	u32 *cached_lut;
 };
 
 /**
diff --git a/drivers/net/ethernet/intel/idpf/idpf_lib.c b/drivers/net/ethernet/intel/idpf/idpf_lib.c
index d56366e676cf..51716e5a84ef 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_lib.c
+++ b/drivers/net/ethernet/intel/idpf/idpf_lib.c
@@ -1073,7 +1073,7 @@ static void idpf_vport_rel(struct idpf_vport *vport)
 	u16 idx = vport->idx;
 
 	vport_config = adapter->vport_config[vport->idx];
-	idpf_deinit_rss(vport);
+	idpf_deinit_rss_lut(vport);
 	rss_data = &vport_config->user_config.rss_data;
 	kfree(rss_data->rss_key);
 	rss_data->rss_key = NULL;
@@ -1226,6 +1226,7 @@ static struct idpf_vport *idpf_vport_alloc(struct idpf_adapter *adapter,
 	u16 idx = adapter->next_vport;
 	struct idpf_vport *vport;
 	u16 num_max_q;
+	int err;
 
 	if (idx == IDPF_NO_FREE_SLOT)
 		return NULL;
@@ -1276,10 +1277,11 @@ static struct idpf_vport *idpf_vport_alloc(struct idpf_adapter *adapter,
 
 	idpf_vport_init(vport, max_q);
 
-	/* This alloc is done separate from the LUT because it's not strictly
-	 * dependent on how many queues we have. If we change number of queues
-	 * and soft reset we'll need a new LUT but the key can remain the same
-	 * for as long as the vport exists.
+	/* LUT and key are both initialized here. Key is not strictly dependent
+	 * on how many queues we have. If we change number of queues and soft
+	 * reset is initiated, LUT will be freed and a new LUT will be allocated
+	 * as per the updated number of queues during vport bringup. However,
+	 * the key remains the same for as long as the vport exists.
 	 */
 	rss_data = &adapter->vport_config[idx]->user_config.rss_data;
 	rss_data->rss_key = kzalloc(rss_data->rss_key_size, GFP_KERNEL);
@@ -1289,6 +1291,11 @@ static struct idpf_vport *idpf_vport_alloc(struct idpf_adapter *adapter,
 	/* Initialize default rss key */
 	netdev_rss_key_fill((void *)rss_data->rss_key, rss_data->rss_key_size);
 
+	/* Initialize default rss LUT */
+	err = idpf_init_rss_lut(vport);
+	if (err)
+		goto free_rss_key;
+
 	/* fill vport slot in the adapter struct */
 	adapter->vports[idx] = vport;
 	adapter->vport_ids[idx] = idpf_get_vport_id(vport);
@@ -1299,6 +1306,8 @@ static struct idpf_vport *idpf_vport_alloc(struct idpf_adapter *adapter,
 
 	return vport;
 
+free_rss_key:
+	kfree(rss_data->rss_key);
 free_vector_idxs:
 	kfree(vport->q_vector_idxs);
 free_vport:
@@ -1476,6 +1485,7 @@ static int idpf_vport_open(struct idpf_vport *vport, bool rtnl)
 	struct idpf_netdev_priv *np = netdev_priv(vport->netdev);
 	struct idpf_adapter *adapter = vport->adapter;
 	struct idpf_vport_config *vport_config;
+	struct idpf_rss_data *rss_data;
 	int err;
 
 	if (test_bit(IDPF_VPORT_UP, np->state))
@@ -1570,12 +1580,21 @@ static int idpf_vport_open(struct idpf_vport *vport, bool rtnl)
 	idpf_restore_features(vport);
 
 	vport_config = adapter->vport_config[vport->idx];
-	if (vport_config->user_config.rss_data.rss_lut)
-		err = idpf_config_rss(vport);
-	else
-		err = idpf_init_rss(vport);
+	rss_data = &vport_config->user_config.rss_data;
+
+	if (!rss_data->rss_lut) {
+		err = idpf_init_rss_lut(vport);
+		if (err) {
+			dev_err(&adapter->pdev->dev,
+				"Failed to initialize RSS LUT for vport %u: %d\n",
+				vport->vport_id, err);
+			goto disable_vport;
+		}
+	}
+
+	err = idpf_config_rss(vport);
 	if (err) {
-		dev_err(&adapter->pdev->dev, "Failed to initialize RSS for vport %u: %d\n",
+		dev_err(&adapter->pdev->dev, "Failed to configure RSS for vport %u: %d\n",
 			vport->vport_id, err);
 		goto disable_vport;
 	}
@@ -1584,7 +1603,7 @@ static int idpf_vport_open(struct idpf_vport *vport, bool rtnl)
 	if (err) {
 		dev_err(&adapter->pdev->dev, "Failed to complete interface up for vport %u: %d\n",
 			vport->vport_id, err);
-		goto deinit_rss;
+		goto disable_vport;
 	}
 
 	if (rtnl)
@@ -1592,8 +1611,6 @@ static int idpf_vport_open(struct idpf_vport *vport, bool rtnl)
 
 	return 0;
 
-deinit_rss:
-	idpf_deinit_rss(vport);
 disable_vport:
 	idpf_send_disable_vport_msg(vport);
 disable_queues:
@@ -2051,7 +2068,7 @@ int idpf_initiate_soft_reset(struct idpf_vport *vport,
 		idpf_vport_stop(vport, false);
 	}
 
-	idpf_deinit_rss(vport);
+	idpf_deinit_rss_lut(vport);
 	/* We're passing in vport here because we need its wait_queue
 	 * to send a message and it should be getting all the vport
 	 * config data out of the adapter but we need to be careful not
@@ -2219,40 +2236,6 @@ static void idpf_set_rx_mode(struct net_device *netdev)
 		dev_err(dev, "Failed to set promiscuous mode: %d\n", err);
 }
 
-/**
- * idpf_vport_manage_rss_lut - disable/enable RSS
- * @vport: the vport being changed
- *
- * In the event of disable request for RSS, this function will zero out RSS
- * LUT, while in the event of enable request for RSS, it will reconfigure RSS
- * LUT with the default LUT configuration.
- */
-static int idpf_vport_manage_rss_lut(struct idpf_vport *vport)
-{
-	bool ena = idpf_is_feature_ena(vport, NETIF_F_RXHASH);
-	struct idpf_rss_data *rss_data;
-	u16 idx = vport->idx;
-	int lut_size;
-
-	rss_data = &vport->adapter->vport_config[idx]->user_config.rss_data;
-	lut_size = rss_data->rss_lut_size * sizeof(u32);
-
-	if (ena) {
-		/* This will contain the default or user configured LUT */
-		memcpy(rss_data->rss_lut, rss_data->cached_lut, lut_size);
-	} else {
-		/* Save a copy of the current LUT to be restored later if
-		 * requested.
-		 */
-		memcpy(rss_data->cached_lut, rss_data->rss_lut, lut_size);
-
-		/* Zero out the current LUT to disable */
-		memset(rss_data->rss_lut, 0, lut_size);
-	}
-
-	return idpf_config_rss(vport);
-}
-
 /**
  * idpf_set_features - set the netdev feature flags
  * @netdev: ptr to the netdev being adjusted
@@ -2278,10 +2261,19 @@ static int idpf_set_features(struct net_device *netdev,
 	}
 
 	if (changed & NETIF_F_RXHASH) {
+		struct idpf_netdev_priv *np = netdev_priv(netdev);
+
 		netdev->features ^= NETIF_F_RXHASH;
-		err = idpf_vport_manage_rss_lut(vport);
-		if (err)
-			goto unlock_mutex;
+
+		/* If the interface is not up when changing the rxhash, update
+		 * to the HW is skipped. The updated LUT will be committed to
+		 * the HW when the interface is brought up.
+		 */
+		if (test_bit(IDPF_VPORT_UP, np->state)) {
+			err = idpf_config_rss(vport);
+			if (err)
+				goto unlock_mutex;
+		}
 	}
 
 	if (changed & NETIF_F_GRO_HW) {
diff --git a/drivers/net/ethernet/intel/idpf/idpf_txrx.c b/drivers/net/ethernet/intel/idpf/idpf_txrx.c
index 1d91c56f7469..8991a891a440 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_txrx.c
+++ b/drivers/net/ethernet/intel/idpf/idpf_txrx.c
@@ -4650,57 +4650,47 @@ static void idpf_fill_dflt_rss_lut(struct idpf_vport *vport)
 
 	rss_data = &adapter->vport_config[vport->idx]->user_config.rss_data;
 
-	for (i = 0; i < rss_data->rss_lut_size; i++) {
+	for (i = 0; i < rss_data->rss_lut_size; i++)
 		rss_data->rss_lut[i] = i % num_active_rxq;
-		rss_data->cached_lut[i] = rss_data->rss_lut[i];
-	}
 }
 
 /**
- * idpf_init_rss - Allocate and initialize RSS resources
+ * idpf_init_rss_lut - Allocate and initialize RSS LUT
  * @vport: virtual port
  *
- * Return 0 on success, negative on failure
+ * Return: 0 on success, negative on failure
  */
-int idpf_init_rss(struct idpf_vport *vport)
+int idpf_init_rss_lut(struct idpf_vport *vport)
 {
 	struct idpf_adapter *adapter = vport->adapter;
 	struct idpf_rss_data *rss_data;
-	u32 lut_size;
 
 	rss_data = &adapter->vport_config[vport->idx]->user_config.rss_data;
+	if (!rss_data->rss_lut) {
+		u32 lut_size;
 
-	lut_size = rss_data->rss_lut_size * sizeof(u32);
-	rss_data->rss_lut = kzalloc(lut_size, GFP_KERNEL);
-	if (!rss_data->rss_lut)
-		return -ENOMEM;
-
-	rss_data->cached_lut = kzalloc(lut_size, GFP_KERNEL);
-	if (!rss_data->cached_lut) {
-		kfree(rss_data->rss_lut);
-		rss_data->rss_lut = NULL;
-
-		return -ENOMEM;
+		lut_size = rss_data->rss_lut_size * sizeof(u32);
+		rss_data->rss_lut = kzalloc(lut_size, GFP_KERNEL);
+		if (!rss_data->rss_lut)
+			return -ENOMEM;
 	}
 
 	/* Fill the default RSS lut values */
 	idpf_fill_dflt_rss_lut(vport);
 
-	return idpf_config_rss(vport);
+	return 0;
 }
 
 /**
- * idpf_deinit_rss - Release RSS resources
+ * idpf_deinit_rss_lut - Release RSS LUT
  * @vport: virtual port
  */
-void idpf_deinit_rss(struct idpf_vport *vport)
+void idpf_deinit_rss_lut(struct idpf_vport *vport)
 {
 	struct idpf_adapter *adapter = vport->adapter;
 	struct idpf_rss_data *rss_data;
 
 	rss_data = &adapter->vport_config[vport->idx]->user_config.rss_data;
-	kfree(rss_data->cached_lut);
-	rss_data->cached_lut = NULL;
 	kfree(rss_data->rss_lut);
 	rss_data->rss_lut = NULL;
 }
diff --git a/drivers/net/ethernet/intel/idpf/idpf_txrx.h b/drivers/net/ethernet/intel/idpf/idpf_txrx.h
index 75b977094741..7d20593bd877 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_txrx.h
+++ b/drivers/net/ethernet/intel/idpf/idpf_txrx.h
@@ -1086,8 +1086,8 @@ void idpf_vport_intr_deinit(struct idpf_vport *vport);
 int idpf_vport_intr_init(struct idpf_vport *vport);
 void idpf_vport_intr_ena(struct idpf_vport *vport);
 int idpf_config_rss(struct idpf_vport *vport);
-int idpf_init_rss(struct idpf_vport *vport);
-void idpf_deinit_rss(struct idpf_vport *vport);
+int idpf_init_rss_lut(struct idpf_vport *vport);
+void idpf_deinit_rss_lut(struct idpf_vport *vport);
 int idpf_rx_bufs_init_all(struct idpf_vport *vport);
 
 struct idpf_q_vector *idpf_find_rxq_vec(const struct idpf_vport *vport,
diff --git a/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c b/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c
index 01bbd12a642a..cb702eac86c8 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c
+++ b/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c
@@ -2804,6 +2804,10 @@ int idpf_send_get_stats_msg(struct idpf_vport *vport)
  * @vport: virtual port data structure
  * @get: flag to set or get rss look up table
  *
+ * When rxhash is disabled, RSS LUT will be configured with zeros.  If rxhash
+ * is enabled, the LUT values stored in driver's soft copy will be used to setup
+ * the HW.
+ *
  * Returns 0 on success, negative on failure.
  */
 int idpf_send_get_set_rss_lut_msg(struct idpf_vport *vport, bool get)
@@ -2814,10 +2818,12 @@ int idpf_send_get_set_rss_lut_msg(struct idpf_vport *vport, bool get)
 	struct idpf_rss_data *rss_data;
 	int buf_size, lut_buf_size;
 	ssize_t reply_sz;
+	bool rxhash_ena;
 	int i;
 
 	rss_data =
 		&vport->adapter->vport_config[vport->idx]->user_config.rss_data;
+	rxhash_ena = idpf_is_feature_ena(vport, NETIF_F_RXHASH);
 	buf_size = struct_size(rl, lut, rss_data->rss_lut_size);
 	rl = kzalloc(buf_size, GFP_KERNEL);
 	if (!rl)
@@ -2839,7 +2845,8 @@ int idpf_send_get_set_rss_lut_msg(struct idpf_vport *vport, bool get)
 	} else {
 		rl->lut_entries = cpu_to_le16(rss_data->rss_lut_size);
 		for (i = 0; i < rss_data->rss_lut_size; i++)
-			rl->lut[i] = cpu_to_le32(rss_data->rss_lut[i]);
+			rl->lut[i] = rxhash_ena ?
+				cpu_to_le32(rss_data->rss_lut[i]) : 0;
 
 		xn_params.vc_op = VIRTCHNL2_OP_SET_RSS_LUT;
 	}
-- 
2.47.1

[PATCH net 09/13] idpf: Fix RSS LUT configuration on down interfaces

[Tony Nguyen]

From: Sreedevi Joshi <sreedevi.joshi@intel.com>

RSS LUT provisioning and queries on a down interface currently return
silently without effect. Users should be able to configure RSS settings
even when the interface is down.

Fix by maintaining RSS configuration changes in the driver's soft copy and
deferring HW programming until the interface comes up.

Fixes: 02cbfba1add5 ("idpf: add ethtool callbacks")
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/idpf/idpf_ethtool.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/intel/idpf/idpf_ethtool.c b/drivers/net/ethernet/intel/idpf/idpf_ethtool.c
index 7000f6283a33..2efa3c08aba5 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_ethtool.c
+++ b/drivers/net/ethernet/intel/idpf/idpf_ethtool.c
@@ -411,7 +411,10 @@ static u32 idpf_get_rxfh_indir_size(struct net_device *netdev)
  * @netdev: network interface device structure
  * @rxfh: pointer to param struct (indir, key, hfunc)
  *
- * Reads the indirection table directly from the hardware. Always returns 0.
+ * RSS LUT and Key information are read from driver's cached
+ * copy. When rxhash is off, rss lut will be displayed as zeros.
+ *
+ * Return: 0 on success, -errno otherwise.
  */
 static int idpf_get_rxfh(struct net_device *netdev,
 			 struct ethtool_rxfh_param *rxfh)
@@ -419,10 +422,13 @@ static int idpf_get_rxfh(struct net_device *netdev,
 	struct idpf_netdev_priv *np = netdev_priv(netdev);
 	struct idpf_rss_data *rss_data;
 	struct idpf_adapter *adapter;
+	struct idpf_vport *vport;
+	bool rxhash_ena;
 	int err = 0;
 	u16 i;
 
 	idpf_vport_ctrl_lock(netdev);
+	vport = idpf_netdev_to_vport(netdev);
 
 	adapter = np->adapter;
 
@@ -432,9 +438,8 @@ static int idpf_get_rxfh(struct net_device *netdev,
 	}
 
 	rss_data = &adapter->vport_config[np->vport_idx]->user_config.rss_data;
-	if (!test_bit(IDPF_VPORT_UP, np->state))
-		goto unlock_mutex;
 
+	rxhash_ena = idpf_is_feature_ena(vport, NETIF_F_RXHASH);
 	rxfh->hfunc = ETH_RSS_HASH_TOP;
 
 	if (rxfh->key)
@@ -442,7 +447,7 @@ static int idpf_get_rxfh(struct net_device *netdev,
 
 	if (rxfh->indir) {
 		for (i = 0; i < rss_data->rss_lut_size; i++)
-			rxfh->indir[i] = rss_data->rss_lut[i];
+			rxfh->indir[i] = rxhash_ena ? rss_data->rss_lut[i] : 0;
 	}
 
 unlock_mutex:
@@ -482,8 +487,6 @@ static int idpf_set_rxfh(struct net_device *netdev,
 	}
 
 	rss_data = &adapter->vport_config[vport->idx]->user_config.rss_data;
-	if (!test_bit(IDPF_VPORT_UP, np->state))
-		goto unlock_mutex;
 
 	if (rxfh->hfunc != ETH_RSS_HASH_NO_CHANGE &&
 	    rxfh->hfunc != ETH_RSS_HASH_TOP) {
@@ -499,7 +502,8 @@ static int idpf_set_rxfh(struct net_device *netdev,
 			rss_data->rss_lut[lut] = rxfh->indir[lut];
 	}
 
-	err = idpf_config_rss(vport);
+	if (test_bit(IDPF_VPORT_UP, np->state))
+		err = idpf_config_rss(vport);
 
 unlock_mutex:
 	idpf_vport_ctrl_unlock(netdev);
-- 
2.47.1

[PATCH net 10/13] idpf: Fix RSS LUT NULL ptr issue after soft reset

[Tony Nguyen]

From: Sreedevi Joshi <sreedevi.joshi@intel.com>

During soft reset, the RSS LUT is freed and not restored unless the
interface is up. If an ethtool command that accesses the rss lut is
attempted immediately after reset, it will result in NULL ptr
dereference. Also, there is no need to reset the rss lut if the soft reset
does not involve queue count change.

After soft reset, set the RSS LUT to default values based on the updated
queue count only if the reset was a result of a queue count change and
the LUT was not configured by the user. In all other cases, don't touch
the LUT.

Steps to reproduce:

** Bring the interface down (if up)
ifconfig eth1 down

** update the queue count (eg., 27->20)
ethtool -L eth1 combined 20

** display the RSS LUT
ethtool -x eth1

[82375.558338] BUG: kernel NULL pointer dereference, address: 0000000000000000
[82375.558373] #PF: supervisor read access in kernel mode
[82375.558391] #PF: error_code(0x0000) - not-present page
[82375.558408] PGD 0 P4D 0
[82375.558421] Oops: Oops: 0000 [#1] SMP NOPTI
<snip>
[82375.558516] RIP: 0010:idpf_get_rxfh+0x108/0x150 [idpf]
[82375.558786] Call Trace:
[82375.558793]  <TASK>
[82375.558804]  rss_prepare.isra.0+0x187/0x2a0
[82375.558827]  rss_prepare_data+0x3a/0x50
[82375.558845]  ethnl_default_doit+0x13d/0x3e0
[82375.558863]  genl_family_rcv_msg_doit+0x11f/0x180
[82375.558886]  genl_rcv_msg+0x1ad/0x2b0
[82375.558902]  ? __pfx_ethnl_default_doit+0x10/0x10
[82375.558920]  ? __pfx_genl_rcv_msg+0x10/0x10
[82375.558937]  netlink_rcv_skb+0x58/0x100
[82375.558957]  genl_rcv+0x2c/0x50
[82375.558971]  netlink_unicast+0x289/0x3e0
[82375.558988]  netlink_sendmsg+0x215/0x440
[82375.559005]  __sys_sendto+0x234/0x240
[82375.559555]  __x64_sys_sendto+0x28/0x30
[82375.560068]  x64_sys_call+0x1909/0x1da0
[82375.560576]  do_syscall_64+0x7a/0xfa0
[82375.561076]  ? clear_bhb_loop+0x60/0xb0
[82375.561567]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
<snip>

Fixes: 02cbfba1add5 ("idpf: add ethtool callbacks")
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/idpf/idpf_lib.c  | 20 ++++----------------
 drivers/net/ethernet/intel/idpf/idpf_txrx.c |  2 +-
 drivers/net/ethernet/intel/idpf/idpf_txrx.h |  1 +
 3 files changed, 6 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/intel/idpf/idpf_lib.c b/drivers/net/ethernet/intel/idpf/idpf_lib.c
index 51716e5a84ef..003bab3ce5ae 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_lib.c
+++ b/drivers/net/ethernet/intel/idpf/idpf_lib.c
@@ -1484,8 +1484,6 @@ static int idpf_vport_open(struct idpf_vport *vport, bool rtnl)
 {
 	struct idpf_netdev_priv *np = netdev_priv(vport->netdev);
 	struct idpf_adapter *adapter = vport->adapter;
-	struct idpf_vport_config *vport_config;
-	struct idpf_rss_data *rss_data;
 	int err;
 
 	if (test_bit(IDPF_VPORT_UP, np->state))
@@ -1579,19 +1577,6 @@ static int idpf_vport_open(struct idpf_vport *vport, bool rtnl)
 
 	idpf_restore_features(vport);
 
-	vport_config = adapter->vport_config[vport->idx];
-	rss_data = &vport_config->user_config.rss_data;
-
-	if (!rss_data->rss_lut) {
-		err = idpf_init_rss_lut(vport);
-		if (err) {
-			dev_err(&adapter->pdev->dev,
-				"Failed to initialize RSS LUT for vport %u: %d\n",
-				vport->vport_id, err);
-			goto disable_vport;
-		}
-	}
-
 	err = idpf_config_rss(vport);
 	if (err) {
 		dev_err(&adapter->pdev->dev, "Failed to configure RSS for vport %u: %d\n",
@@ -2068,7 +2053,6 @@ int idpf_initiate_soft_reset(struct idpf_vport *vport,
 		idpf_vport_stop(vport, false);
 	}
 
-	idpf_deinit_rss_lut(vport);
 	/* We're passing in vport here because we need its wait_queue
 	 * to send a message and it should be getting all the vport
 	 * config data out of the adapter but we need to be careful not
@@ -2094,6 +2078,10 @@ int idpf_initiate_soft_reset(struct idpf_vport *vport,
 	if (err)
 		goto err_open;
 
+	if (reset_cause == IDPF_SR_Q_CHANGE &&
+	    !netif_is_rxfh_configured(vport->netdev))
+		idpf_fill_dflt_rss_lut(vport);
+
 	if (vport_is_up)
 		err = idpf_vport_open(vport, false);
 
diff --git a/drivers/net/ethernet/intel/idpf/idpf_txrx.c b/drivers/net/ethernet/intel/idpf/idpf_txrx.c
index 8991a891a440..f51d52297e1e 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_txrx.c
+++ b/drivers/net/ethernet/intel/idpf/idpf_txrx.c
@@ -4641,7 +4641,7 @@ int idpf_config_rss(struct idpf_vport *vport)
  * idpf_fill_dflt_rss_lut - Fill the indirection table with the default values
  * @vport: virtual port structure
  */
-static void idpf_fill_dflt_rss_lut(struct idpf_vport *vport)
+void idpf_fill_dflt_rss_lut(struct idpf_vport *vport)
 {
 	struct idpf_adapter *adapter = vport->adapter;
 	u16 num_active_rxq = vport->num_rxq;
diff --git a/drivers/net/ethernet/intel/idpf/idpf_txrx.h b/drivers/net/ethernet/intel/idpf/idpf_txrx.h
index 7d20593bd877..0472698ca192 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_txrx.h
+++ b/drivers/net/ethernet/intel/idpf/idpf_txrx.h
@@ -1085,6 +1085,7 @@ void idpf_vport_intr_update_itr_ena_irq(struct idpf_q_vector *q_vector);
 void idpf_vport_intr_deinit(struct idpf_vport *vport);
 int idpf_vport_intr_init(struct idpf_vport *vport);
 void idpf_vport_intr_ena(struct idpf_vport *vport);
+void idpf_fill_dflt_rss_lut(struct idpf_vport *vport);
 int idpf_config_rss(struct idpf_vport *vport);
 int idpf_init_rss_lut(struct idpf_vport *vport);
 void idpf_deinit_rss_lut(struct idpf_vport *vport);
-- 
2.47.1

[PATCH net 11/13] idpf: Fix error handling in idpf_vport_open()

[Tony Nguyen]

From: Sreedevi Joshi <sreedevi.joshi@intel.com>

Fix error handling to properly cleanup interrupts when
idpf_vport_queue_ids_init() or idpf_rx_bufs_init_all() fail. Jump to
'intr_deinit' instead of 'queues_rel' to ensure interrupts are cleaned up
before releasing other resources.

Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport")
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/idpf/idpf_lib.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/idpf/idpf_lib.c b/drivers/net/ethernet/intel/idpf/idpf_lib.c
index 003bab3ce5ae..131a8121839b 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_lib.c
+++ b/drivers/net/ethernet/intel/idpf/idpf_lib.c
@@ -1524,14 +1524,14 @@ static int idpf_vport_open(struct idpf_vport *vport, bool rtnl)
 	if (err) {
 		dev_err(&adapter->pdev->dev, "Failed to initialize queue registers for vport %u: %d\n",
 			vport->vport_id, err);
-		goto queues_rel;
+		goto intr_deinit;
 	}
 
 	err = idpf_rx_bufs_init_all(vport);
 	if (err) {
 		dev_err(&adapter->pdev->dev, "Failed to initialize RX buffers for vport %u: %d\n",
 			vport->vport_id, err);
-		goto queues_rel;
+		goto intr_deinit;
 	}
 
 	idpf_rx_init_buf_tail(vport);
-- 
2.47.1

[PATCH net 12/13] idpf: cap maximum Rx buffer size

[Tony Nguyen]

From: Joshua Hay <joshua.a.hay@intel.com>

The HW only supports a maximum Rx buffer size of 16K-128. On systems
using large pages, the libeth logic can configure the buffer size to be
larger than this. The upper bound is PAGE_SIZE while the lower bound is
MTU rounded up to the nearest power of 2. For example, ARM systems with
a 64K page size and an mtu of 9000 will set the Rx buffer size to 16K,
which will cause the config Rx queues message to fail.

Initialize the bufq/fill queue buf_len field to the maximum supported
size. This will trigger the libeth logic to cap the maximum Rx buffer
size by reducing the upper bound.

Fixes: 74d1412ac8f37 ("idpf: use libeth Rx buffer management for payload buffer")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: David Decotigny <ddecotig@google.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/idpf/idpf_txrx.c | 8 +++++---
 drivers/net/ethernet/intel/idpf/idpf_txrx.h | 1 +
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/idpf/idpf_txrx.c b/drivers/net/ethernet/intel/idpf/idpf_txrx.c
index f51d52297e1e..7f3933ca9edc 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_txrx.c
+++ b/drivers/net/ethernet/intel/idpf/idpf_txrx.c
@@ -695,9 +695,10 @@ static int idpf_rx_buf_alloc_singleq(struct idpf_rx_queue *rxq)
 static int idpf_rx_bufs_init_singleq(struct idpf_rx_queue *rxq)
 {
 	struct libeth_fq fq = {
-		.count	= rxq->desc_count,
-		.type	= LIBETH_FQE_MTU,
-		.nid	= idpf_q_vector_to_mem(rxq->q_vector),
+		.count		= rxq->desc_count,
+		.type		= LIBETH_FQE_MTU,
+		.buf_len	= IDPF_RX_MAX_BUF_SZ,
+		.nid		= idpf_q_vector_to_mem(rxq->q_vector),
 	};
 	int ret;
 
@@ -754,6 +755,7 @@ static int idpf_rx_bufs_init(struct idpf_buf_queue *bufq,
 		.truesize	= bufq->truesize,
 		.count		= bufq->desc_count,
 		.type		= type,
+		.buf_len	= IDPF_RX_MAX_BUF_SZ,
 		.hsplit		= idpf_queue_has(HSPLIT_EN, bufq),
 		.xdp		= idpf_xdp_enabled(bufq->q_vector->vport),
 		.nid		= idpf_q_vector_to_mem(bufq->q_vector),
diff --git a/drivers/net/ethernet/intel/idpf/idpf_txrx.h b/drivers/net/ethernet/intel/idpf/idpf_txrx.h
index 0472698ca192..423cc9486dce 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_txrx.h
+++ b/drivers/net/ethernet/intel/idpf/idpf_txrx.h
@@ -101,6 +101,7 @@ do {								\
 		idx = 0;					\
 } while (0)
 
+#define IDPF_RX_MAX_BUF_SZ			(16384 - 128)
 #define IDPF_RX_BUF_STRIDE			32
 #define IDPF_RX_BUF_POST_STRIDE			16
 #define IDPF_LOW_WATERMARK			64
-- 
2.47.1

[PATCH net 13/13] idpf: fix aux device unplugging when rdma is not supported by vport

[Tony Nguyen]

From: Larysa Zaremba <larysa.zaremba@intel.com>

If vport flags do not contain VIRTCHNL2_VPORT_ENABLE_RDMA, driver does not
allocate vdev_info for this vport. This leads to kernel NULL pointer
dereference in idpf_idc_vport_dev_down(), which references vdev_info for
every vport regardless.

Check, if vdev_info was ever allocated before unplugging aux device.

Fixes: be91128c579c ("idpf: implement RDMA vport auxiliary dev create, init, and destroy")
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/idpf/idpf_idc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/idpf/idpf_idc.c b/drivers/net/ethernet/intel/idpf/idpf_idc.c
index 7e20a07e98e5..6dad0593f7f2 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_idc.c
+++ b/drivers/net/ethernet/intel/idpf/idpf_idc.c
@@ -322,7 +322,7 @@ static void idpf_idc_vport_dev_down(struct idpf_adapter *adapter)
 	for (i = 0; i < adapter->num_alloc_vports; i++) {
 		struct idpf_vport *vport = adapter->vports[i];
 
-		if (!vport)
+		if (!vport || !vport->vdev_info)
 			continue;
 
 		idpf_unplug_aux_dev(vport->vdev_info->adev);
-- 
2.47.1

Re: [PATCH net 00/13][pull request] Intel Wired LAN Driver Updates 2026-01-06 (idpf)

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net.git (main)
by Tony Nguyen <anthony.l.nguyen@intel.com>:

On Tue,  6 Jan 2026 16:06:32 -0800 you wrote:
> This series contains updates to idpf driver only.
> 
> Emil fixes issues related to resets; among them timeouts, NULL pointer
> dereferences, and memory leaks.
> 
> Sreedevi resolves issues around RSS; mainly involving operations when
> the interface is down and resets. She also addresses some incomplete
> cleanups for ntuple filters and interrupts.
> 
> [...]

Here is the summary with links:
  - [net,01/13] idpf: keep the netdev when a reset fails
    https://git.kernel.org/netdev/net/c/083029bd8b44
  - [net,02/13] idpf: detach and close netdevs while handling a reset
    https://git.kernel.org/netdev/net/c/2e281e1155fc
  - [net,03/13] idpf: fix memory leak in idpf_vport_rel()
    https://git.kernel.org/netdev/net/c/f6242b354605
  - [net,04/13] idpf: fix memory leak in idpf_vc_core_deinit()
    https://git.kernel.org/netdev/net/c/e111cbc4adf9
  - [net,05/13] idpf: fix error handling in the init_task on load
    https://git.kernel.org/netdev/net/c/4d792219fe6f
  - [net,06/13] idpf: fix memory leak of flow steer list on rmmod
    https://git.kernel.org/netdev/net/c/f9841bd28b60
  - [net,07/13] idpf: fix issue with ethtool -n command display
    https://git.kernel.org/netdev/net/c/36aae2ea6bd7
  - [net,08/13] idpf: Fix RSS LUT NULL pointer crash on early ethtool operations
    https://git.kernel.org/netdev/net/c/83f38f210b85
  - [net,09/13] idpf: Fix RSS LUT configuration on down interfaces
    https://git.kernel.org/netdev/net/c/445b49d13787
  - [net,10/13] idpf: Fix RSS LUT NULL ptr issue after soft reset
    https://git.kernel.org/netdev/net/c/ebecca5b0938
  - [net,11/13] idpf: Fix error handling in idpf_vport_open()
    https://git.kernel.org/netdev/net/c/87b8ee64685b
  - [net,12/13] idpf: cap maximum Rx buffer size
    https://git.kernel.org/netdev/net/c/086efe0a1ecc
  - [net,13/13] idpf: fix aux device unplugging when rdma is not supported by vport
    https://git.kernel.org/netdev/net/c/4648fb2f2e72

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html