* [PATCH v2] selftests: net: forwarding: fix IPv6 address leak in cleanup
@ 2026-03-05 21:10 Aleksei Oladko
2026-03-06 13:27 ` Ido Schimmel
2026-03-07 1:30 ` patchwork-bot+netdevbpf
0 siblings, 2 replies; 3+ messages in thread
From: Aleksei Oladko @ 2026-03-05 21:10 UTC (permalink / raw)
To: David S . Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Simon Horman, Shuah Khan, Petr Machata, Ido Schimmel, Nir Dotan
Cc: netdev, linux-kselftest, linux-kernel, Aleksei Oladko
Several forwarding tests (e.g., gre_multipath.sh) initialize both IPv4
and IPv6 addresses using simple_if_init, but only clean up IPv4
in simple_if_fini. This leaves stale IPv6 addresses on the interfaces,
which causes subsequent tests to fail when they encounter unexpected
address configuration.
The issue can be reproduced by running tests in sequence:
# run_kselftest.sh -t net/forwarding:ipip_hier_gre.sh
# run_kselftest.sh -t net/forwarding:min_max_mtu.sh
TAP version 13
1..1
# timeout set to 0
# selftests: net/forwarding: min_max_mtu.sh
# TEST: ping [ OK ]
# TEST: ping6 [ OK ]
# TEST: Test maximum MTU configuration [ OK ]
# TEST: Test traffic, packet size is maximum MTU [FAIL]
# Ping6, packet size: 65487 succeeded, but should have failed
# TEST: Test minimum MTU configuration [ OK ]
# TEST: Test traffic, packet size is minimum MTU [ OK ]
not ok 1 selftests: net/forwarding: min_max_mtu.sh # exit=1
Fix this by removing the unused IPv6 argument from simple_if_init in
tests that don't use IPv6 (gre_multipath.sh, ipip_lib.sh), and by
adding the missing IPv6 argument to simple_if_fini in tests that
use IPv6 (gre_multipath_nh.sh, gre_multipath_nh_res.sh).
Fixes: fed926d4f64c ("selftests: forwarding: Add IP tunneling lib")
Fixes: 902280cacc03 ("selftests: forwarding: Add resilient multipath tunneling nexthop test")
Fixes: 54818c4c4b93 ("selftests: forwarding: Test multipath tunneling")
Fixes: e035146d6560 ("selftests: forwarding: Add multipath tunneling nexthop test")
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
---
Changes in v2:
- In gre_multipath.sh and ipip_lib.sh, remove the unused IPv6 address
from simple_if_init instead of adding it to simple_if_fini, since
these tests don't use IPv6
- Link to v1: https://lore.kernel.org/linux-kselftest/20260301124052.GA713428@shredder/T/
---
tools/testing/selftests/net/forwarding/gre_multipath.sh | 2 +-
tools/testing/selftests/net/forwarding/gre_multipath_nh.sh | 2 +-
tools/testing/selftests/net/forwarding/gre_multipath_nh_res.sh | 2 +-
tools/testing/selftests/net/forwarding/ipip_lib.sh | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/gre_multipath.sh b/tools/testing/selftests/net/forwarding/gre_multipath.sh
index 57531c1d884d..ce4ae74843d9 100755
--- a/tools/testing/selftests/net/forwarding/gre_multipath.sh
+++ b/tools/testing/selftests/net/forwarding/gre_multipath.sh
@@ -65,7 +65,7 @@ source lib.sh
h1_create()
{
- simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+ simple_if_init $h1 192.0.2.1/28
ip route add vrf v$h1 192.0.2.16/28 via 192.0.2.2
}
diff --git a/tools/testing/selftests/net/forwarding/gre_multipath_nh.sh b/tools/testing/selftests/net/forwarding/gre_multipath_nh.sh
index 7d5b2b9cc133..c667b81da37f 100755
--- a/tools/testing/selftests/net/forwarding/gre_multipath_nh.sh
+++ b/tools/testing/selftests/net/forwarding/gre_multipath_nh.sh
@@ -80,7 +80,7 @@ h1_destroy()
{
ip route del vrf v$h1 2001:db8:2::/64 via 2001:db8:1::2
ip route del vrf v$h1 192.0.2.16/28 via 192.0.2.2
- simple_if_fini $h1 192.0.2.1/28
+ simple_if_fini $h1 192.0.2.1/28 2001:db8:1::1/64
}
sw1_create()
diff --git a/tools/testing/selftests/net/forwarding/gre_multipath_nh_res.sh b/tools/testing/selftests/net/forwarding/gre_multipath_nh_res.sh
index 370f9925302d..d04bad58a96a 100755
--- a/tools/testing/selftests/net/forwarding/gre_multipath_nh_res.sh
+++ b/tools/testing/selftests/net/forwarding/gre_multipath_nh_res.sh
@@ -80,7 +80,7 @@ h1_destroy()
{
ip route del vrf v$h1 2001:db8:2::/64 via 2001:db8:1::2
ip route del vrf v$h1 192.0.2.16/28 via 192.0.2.2
- simple_if_fini $h1 192.0.2.1/28
+ simple_if_fini $h1 192.0.2.1/28 2001:db8:1::1/64
}
sw1_create()
diff --git a/tools/testing/selftests/net/forwarding/ipip_lib.sh b/tools/testing/selftests/net/forwarding/ipip_lib.sh
index 01e62c4ac94d..b255646b737a 100644
--- a/tools/testing/selftests/net/forwarding/ipip_lib.sh
+++ b/tools/testing/selftests/net/forwarding/ipip_lib.sh
@@ -144,7 +144,7 @@
h1_create()
{
- simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+ simple_if_init $h1 192.0.2.1/28
ip route add vrf v$h1 192.0.2.16/28 via 192.0.2.2
}
--
2.43.0
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH v2] selftests: net: forwarding: fix IPv6 address leak in cleanup
2026-03-05 21:10 [PATCH v2] selftests: net: forwarding: fix IPv6 address leak in cleanup Aleksei Oladko
@ 2026-03-06 13:27 ` Ido Schimmel
2026-03-07 1:30 ` patchwork-bot+netdevbpf
1 sibling, 0 replies; 3+ messages in thread
From: Ido Schimmel @ 2026-03-06 13:27 UTC (permalink / raw)
To: Aleksei Oladko
Cc: David S . Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Simon Horman, Shuah Khan, Petr Machata, Nir Dotan, netdev,
linux-kselftest, linux-kernel
On Thu, Mar 05, 2026 at 09:10:00PM +0000, Aleksei Oladko wrote:
> Several forwarding tests (e.g., gre_multipath.sh) initialize both IPv4
> and IPv6 addresses using simple_if_init, but only clean up IPv4
> in simple_if_fini. This leaves stale IPv6 addresses on the interfaces,
> which causes subsequent tests to fail when they encounter unexpected
> address configuration.
>
> The issue can be reproduced by running tests in sequence:
> # run_kselftest.sh -t net/forwarding:ipip_hier_gre.sh
> # run_kselftest.sh -t net/forwarding:min_max_mtu.sh
> TAP version 13
> 1..1
> # timeout set to 0
> # selftests: net/forwarding: min_max_mtu.sh
> # TEST: ping [ OK ]
> # TEST: ping6 [ OK ]
> # TEST: Test maximum MTU configuration [ OK ]
> # TEST: Test traffic, packet size is maximum MTU [FAIL]
> # Ping6, packet size: 65487 succeeded, but should have failed
> # TEST: Test minimum MTU configuration [ OK ]
> # TEST: Test traffic, packet size is minimum MTU [ OK ]
> not ok 1 selftests: net/forwarding: min_max_mtu.sh # exit=1
>
> Fix this by removing the unused IPv6 argument from simple_if_init in
> tests that don't use IPv6 (gre_multipath.sh, ipip_lib.sh), and by
> adding the missing IPv6 argument to simple_if_fini in tests that
> use IPv6 (gre_multipath_nh.sh, gre_multipath_nh_res.sh).
>
> Fixes: fed926d4f64c ("selftests: forwarding: Add IP tunneling lib")
> Fixes: 902280cacc03 ("selftests: forwarding: Add resilient multipath tunneling nexthop test")
> Fixes: 54818c4c4b93 ("selftests: forwarding: Test multipath tunneling")
> Fixes: e035146d6560 ("selftests: forwarding: Add multipath tunneling nexthop test")
> Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH v2] selftests: net: forwarding: fix IPv6 address leak in cleanup
2026-03-05 21:10 [PATCH v2] selftests: net: forwarding: fix IPv6 address leak in cleanup Aleksei Oladko
2026-03-06 13:27 ` Ido Schimmel
@ 2026-03-07 1:30 ` patchwork-bot+netdevbpf
1 sibling, 0 replies; 3+ messages in thread
From: patchwork-bot+netdevbpf @ 2026-03-07 1:30 UTC (permalink / raw)
To: Aleksei Oladko
Cc: davem, edumazet, kuba, pabeni, horms, shuah, petrm, idosch, nird,
netdev, linux-kselftest, linux-kernel
Hello:
This patch was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@kernel.org>:
On Thu, 5 Mar 2026 21:10:00 +0000 you wrote:
> Several forwarding tests (e.g., gre_multipath.sh) initialize both IPv4
> and IPv6 addresses using simple_if_init, but only clean up IPv4
> in simple_if_fini. This leaves stale IPv6 addresses on the interfaces,
> which causes subsequent tests to fail when they encounter unexpected
> address configuration.
>
> The issue can be reproduced by running tests in sequence:
> # run_kselftest.sh -t net/forwarding:ipip_hier_gre.sh
> # run_kselftest.sh -t net/forwarding:min_max_mtu.sh
> TAP version 13
> 1..1
> # timeout set to 0
> # selftests: net/forwarding: min_max_mtu.sh
> # TEST: ping [ OK ]
> # TEST: ping6 [ OK ]
> # TEST: Test maximum MTU configuration [ OK ]
> # TEST: Test traffic, packet size is maximum MTU [FAIL]
> # Ping6, packet size: 65487 succeeded, but should have failed
> # TEST: Test minimum MTU configuration [ OK ]
> # TEST: Test traffic, packet size is minimum MTU [ OK ]
> not ok 1 selftests: net/forwarding: min_max_mtu.sh # exit=1
>
> [...]
Here is the summary with links:
- [v2] selftests: net: forwarding: fix IPv6 address leak in cleanup
https://git.kernel.org/netdev/net-next/c/21c0dc7cdd07
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-03-07 1:30 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-03-05 21:10 [PATCH v2] selftests: net: forwarding: fix IPv6 address leak in cleanup Aleksei Oladko
2026-03-06 13:27 ` Ido Schimmel
2026-03-07 1:30 ` patchwork-bot+netdevbpf
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox