* [PATCH net-next] net: stmmac: remove stmmac_dwmac4_get_mac_addr()
@ 2026-03-07 10:55 Russell King (Oracle)
2026-03-10 3:00 ` patchwork-bot+netdevbpf
0 siblings, 1 reply; 2+ messages in thread
From: Russell King (Oracle) @ 2026-03-07 10:55 UTC (permalink / raw)
To: Andrew Lunn
Cc: Alexandre Torgue, Andrew Lunn, David S. Miller, Eric Dumazet,
Jakub Kicinski, linux-arm-kernel, linux-stm32, netdev,
Paolo Abeni
stmmac_dwmac4_get_mac_addr() is identical to stmmac_get_mac_addr().
Remove stmmac_dwmac4_get_mac_addr() to avoid this code duplication.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
.../net/ethernet/stmicro/stmmac/dwmac4_core.c | 4 ++--
.../net/ethernet/stmicro/stmmac/dwmac4_lib.c | 18 ------------------
2 files changed, 2 insertions(+), 20 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index 602771e19d0f..e6bcb77b22a2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -373,8 +373,8 @@ static void dwmac4_get_umac_addr(struct mac_device_info *hw,
{
void __iomem *ioaddr = hw->pcsr;
- stmmac_dwmac4_get_mac_addr(ioaddr, addr, GMAC_ADDR_HIGH(reg_n),
- GMAC_ADDR_LOW(reg_n));
+ stmmac_get_mac_addr(ioaddr, addr, GMAC_ADDR_HIGH(reg_n),
+ GMAC_ADDR_LOW(reg_n));
}
static int dwmac4_set_lpi_mode(struct mac_device_info *hw,
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
index 8c87a20880c4..a0249715fafa 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
@@ -226,21 +226,3 @@ void stmmac_dwmac4_set_mac(void __iomem *ioaddr, bool enable)
if (value != old_val)
writel(value, ioaddr + GMAC_CONFIG);
}
-
-void stmmac_dwmac4_get_mac_addr(void __iomem *ioaddr, unsigned char *addr,
- unsigned int high, unsigned int low)
-{
- unsigned int hi_addr, lo_addr;
-
- /* Read the MAC address from the hardware */
- hi_addr = readl(ioaddr + high);
- lo_addr = readl(ioaddr + low);
-
- /* Extract the MAC address from the high and low words */
- addr[0] = lo_addr & 0xff;
- addr[1] = (lo_addr >> 8) & 0xff;
- addr[2] = (lo_addr >> 16) & 0xff;
- addr[3] = (lo_addr >> 24) & 0xff;
- addr[4] = hi_addr & 0xff;
- addr[5] = (hi_addr >> 8) & 0xff;
-}
--
2.47.3
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH net-next] net: stmmac: remove stmmac_dwmac4_get_mac_addr()
2026-03-07 10:55 [PATCH net-next] net: stmmac: remove stmmac_dwmac4_get_mac_addr() Russell King (Oracle)
@ 2026-03-10 3:00 ` patchwork-bot+netdevbpf
0 siblings, 0 replies; 2+ messages in thread
From: patchwork-bot+netdevbpf @ 2026-03-10 3:00 UTC (permalink / raw)
To: Russell King
Cc: andrew, alexandre.torgue, andrew+netdev, davem, edumazet, kuba,
linux-arm-kernel, linux-stm32, netdev, pabeni
Hello:
This patch was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@kernel.org>:
On Sat, 07 Mar 2026 10:55:08 +0000 you wrote:
> stmmac_dwmac4_get_mac_addr() is identical to stmmac_get_mac_addr().
> Remove stmmac_dwmac4_get_mac_addr() to avoid this code duplication.
>
> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
> ---
> .../net/ethernet/stmicro/stmmac/dwmac4_core.c | 4 ++--
> .../net/ethernet/stmicro/stmmac/dwmac4_lib.c | 18 ------------------
> 2 files changed, 2 insertions(+), 20 deletions(-)
Here is the summary with links:
- [net-next] net: stmmac: remove stmmac_dwmac4_get_mac_addr()
https://git.kernel.org/netdev/net-next/c/c127d4087930
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-03-10 3:00 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-03-07 10:55 [PATCH net-next] net: stmmac: remove stmmac_dwmac4_get_mac_addr() Russell King (Oracle)
2026-03-10 3:00 ` patchwork-bot+netdevbpf
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox