From: Kyuwon Cho <kyuwoncho18@gmail.com>
To: Aaron Conole <aconole@redhat.com>,
Eelco Chaudron <echaudro@redhat.com>,
Ilya Maximets <i.maximets@ovn.org>
Cc: "David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Simon Horman <horms@kernel.org>,
netdev@vger.kernel.org, dev@openvswitch.org,
linux-kernel@vger.kernel.org
Subject: [BUG] net: openvswitch: WARN_ONCE in ovs_fragment() reachable with a user-supplied MRU on a non-IP packet
Date: Tue, 17 Nov 2026 07:12:32 -0800 (PST) [thread overview]
Message-ID: <179492834266.3639154.14679778183890331729@gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 2481 bytes --]
Hi Aaron, Eelco, Ilya,
While testing v7.4-rc3 with an LLM-guided test generator that we are
developing as a research prototype, we found that OVS_PACKET_CMD_EXECUTE
can trigger the WARN_ONCE() at the end of ovs_fragment(). An unprivileged
user can do this from its own user and network namespace:
Failed fragment ->ovs0: eth=8847, MRU=500, MTU=1500.
WARNING: net/openvswitch/actions.c:831 at ovs_fragment+0x239/0x840, CPU#1: test/106
CPU: 1 UID: 65534 PID: 106 Comm: test Not tainted 7.4.0-rc3 #1 PREEMPT(lazy)
RIP: 0010:ovs_fragment+0x24e/0x840
Call Trace:
<TASK>
do_execute_actions+0x580e/0x7380
ovs_execute_actions+0xd3/0x3e0
ovs_packet_cmd_execute+0xc21/0x13c0
genl_family_rcv_msg_doit+0x1e0/0x2c0
genl_rcv_msg+0x42d/0x6f0
netlink_rcv_skb+0x11f/0x350
genl_rcv+0x23/0x30
netlink_unicast+0x518/0x870
netlink_sendmsg+0x849/0xe20
__sys_sendto+0x36a/0x3c0
OVS_PACKET_ATTR_MRU is taken from the request as is. In do_output(), a
packet longer than mru + hard_header_len goes to ovs_fragment() when mru
is not larger than the port's MTU. ovs_fragment() only handles IPv4 and
IPv6, and treats any other ethertype as a case that should not happen:
} else {
WARN_ONCE(1, "Failed fragment ->%s: eth=%04x, MRU=%d, MTU=%d.",
ovs_vport_name(vport), ntohs(key->eth.type), mru,
vport->dev->mtu);
reason = OVS_DROP_FRAG_INVALID_PROTO;
goto err;
}
With an MRU in the request, any ethertype reaches it; we used MPLS
(0x8847). The packet is dropped either way, so the effect is the
warning, which panics a machine with panic_on_warn.
Dropping the packet with a rate-limited message instead of the WARN, as
fd954cc1919e ("openvswitch: switch from WARN to pr_warn") did for
ovs_dp_reset_user_features(), or checking the ethertype in do_output()
before calling ovs_fragment(), should avoid it. We have not tested either
change.
The reproducer runs as an unprivileged user (uid 65534) that creates a
user and network namespace, creates a datapath with an internal port,
and executes one 1434-byte Ethernet frame with ethertype 0x8847,
OVS_PACKET_ATTR_MRU 500 and an output action to that port. On an x86_64
QEMU guest with 2 vCPUs and KASAN (gcc 13.3, config attached), it warns
in every run (7 of 7).
Checked against v7.4-rc3 (aebb72744764); actions.c is the same in
net-next (6ff4c5942a30). We found no earlier report on syzbot or in a
web search.
The reproducer (repro.c) and the kernel config are attached.
Thanks,
Kyuwon Cho
[-- Attachment #2: repro.c --]
[-- Type: text/plain, Size: 4522 bytes --]
// WARNING in ovs_fragment: an unprivileged user executes an MPLS frame larger
// than the MRU it supplies, with output to an internal port of its own datapath.
#define _GNU_SOURCE
#include <arpa/inet.h>
#include <fcntl.h>
#include <linux/genetlink.h>
#include <linux/if_ether.h>
#include <linux/netlink.h>
#include <linux/openvswitch.h>
#include <net/if.h>
#include <sched.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#include <unistd.h>
static int fd;
static void put(char *buf, size_t *len, uint16_t type, const void *data, size_t dlen)
{
struct nlattr *a = (struct nlattr *)(buf + *len);
a->nla_type = type;
a->nla_len = NLA_HDRLEN + dlen;
memcpy((char *)a + NLA_HDRLEN, data, dlen);
*len += NLA_ALIGN(a->nla_len);
}
/* Send one generic netlink request; return the reply in rb and the error. */
static int req(uint16_t fam, uint8_t cmd, uint32_t dp, const char *attrs, size_t alen, char *rb)
{
char msg[8192] = {0};
struct nlmsghdr *nh = (struct nlmsghdr *)msg;
struct genlmsghdr *gh = (struct genlmsghdr *)NLMSG_DATA(nh);
size_t off = NLMSG_HDRLEN + GENL_HDRLEN;
gh->cmd = cmd;
gh->version = 1;
if (fam != GENL_ID_CTRL) {
((struct ovs_header *)(msg + off))->dp_ifindex = dp;
off += sizeof(struct ovs_header);
}
memcpy(msg + off, attrs, alen);
nh->nlmsg_len = off + alen;
nh->nlmsg_type = fam;
nh->nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK;
if (send(fd, msg, nh->nlmsg_len, 0) < 0)
return -1;
/* A reply, if any, comes before the ACK that NLM_F_ACK asks for. */
for (;;) {
if (recv(fd, msg, sizeof(msg), 0) < 0)
return -1;
if (nh->nlmsg_type == NLMSG_ERROR)
return ((struct nlmsgerr *)NLMSG_DATA(nh))->error;
memcpy(rb, msg, sizeof(msg));
}
}
static uint16_t family(const char *name)
{
char a[64], rb[8192];
size_t al = 0;
struct nlattr *na;
put(a, &al, CTRL_ATTR_FAMILY_NAME, name, strlen(name) + 1);
if (req(GENL_ID_CTRL, CTRL_CMD_GETFAMILY, 0, a, al, rb))
exit(1);
for (na = (struct nlattr *)(rb + NLMSG_HDRLEN + GENL_HDRLEN); na->nla_type != CTRL_ATTR_FAMILY_ID;
na = (struct nlattr *)((char *)na + NLA_ALIGN(na->nla_len)))
;
return *(uint16_t *)((char *)na + NLA_HDRLEN);
}
static void write_file(const char *path, const char *s)
{
int f = open(path, O_WRONLY);
if (f < 0 || write(f, s, strlen(s)) < 0)
exit(1);
close(f);
}
int main(void)
{
char a[4096], key[256], act[64], rb[8192];
uint8_t frame[1434] = {0};
size_t al = 0, kl = 0, cl = 0;
uint32_t pid = 0, type = OVS_VPORT_TYPE_INTERNAL, port = 1, dp;
uint16_t fam_dp, fam_vport, fam_packet, et = htons(ETH_P_MPLS_UC), mru = 500;
struct ovs_key_ethernet eth = {{0}};
struct ifreq ifr = {0};
char map[32];
snprintf(map, sizeof(map), "0 %d 1", getuid());
if (unshare(CLONE_NEWUSER | CLONE_NEWNET))
return 1;
write_file("/proc/self/setgroups", "deny");
write_file("/proc/self/uid_map", map);
snprintf(map, sizeof(map), "0 %d 1", getgid());
write_file("/proc/self/gid_map", map);
fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_GENERIC);
fam_dp = family(OVS_DATAPATH_FAMILY);
fam_vport = family(OVS_VPORT_FAMILY);
fam_packet = family(OVS_PACKET_FAMILY);
put(a, &al, OVS_DP_ATTR_NAME, "dp0", 4);
put(a, &al, OVS_DP_ATTR_UPCALL_PID, &pid, 4);
printf("datapath: %d\n", req(fam_dp, OVS_DP_CMD_NEW, 0, a, al, rb));
dp = if_nametoindex("dp0");
al = 0;
put(a, &al, OVS_VPORT_ATTR_NAME, "ovs0", 5);
put(a, &al, OVS_VPORT_ATTR_TYPE, &type, 4);
put(a, &al, OVS_VPORT_ATTR_PORT_NO, &port, 4);
put(a, &al, OVS_VPORT_ATTR_UPCALL_PID, &pid, 4);
printf("vport: %d\n", req(fam_vport, OVS_VPORT_CMD_NEW, dp, a, al, rb));
strcpy(ifr.ifr_name, "ovs0");
ifr.ifr_flags = IFF_UP;
ioctl(socket(AF_INET, SOCK_DGRAM, 0), SIOCSIFFLAGS, &ifr);
/* An Ethernet frame with an MPLS ethertype, longer than the MRU below. */
frame[0] = 0x02;
frame[11] = 0x02;
memcpy(frame + 12, &et, 2);
memset(frame + 14, 0x41, sizeof(frame) - 14);
memcpy(eth.eth_dst, frame, 6);
memcpy(eth.eth_src, frame + 6, 6);
put(key, &kl, OVS_KEY_ATTR_ETHERNET, ð, sizeof(eth));
put(key, &kl, OVS_KEY_ATTR_ETHERTYPE, &et, 2);
put(key, &kl, OVS_KEY_ATTR_IN_PORT, &pid, 4);
put(act, &cl, OVS_ACTION_ATTR_OUTPUT, &port, 4);
al = 0;
put(a, &al, OVS_PACKET_ATTR_PACKET, frame, sizeof(frame));
put(a, &al, OVS_PACKET_ATTR_KEY, key, kl);
put(a, &al, OVS_PACKET_ATTR_ACTIONS, act, cl);
put(a, &al, OVS_PACKET_ATTR_MRU, &mru, 2);
printf("execute: %d\n", req(fam_packet, OVS_PACKET_CMD_EXECUTE, dp, a, al, rb));
return 0;
}
[-- Attachment #3: config.gz --]
[-- Type: application/gzip, Size: 37687 bytes --]
reply other threads:[~2026-11-17 15:12 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=179492834266.3639154.14679778183890331729@gmail.com \
--to=kyuwoncho18@gmail.com \
--cc=aconole@redhat.com \
--cc=davem@davemloft.net \
--cc=dev@openvswitch.org \
--cc=echaudro@redhat.com \
--cc=edumazet@kernel.org \
--cc=horms@kernel.org \
--cc=i.maximets@ovn.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox