netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jay Vosburgh <jay.vosburgh@canonical.com>
To: Nikolay Aleksandrov <razor@blackwall.org>
Cc: netdev@vger.kernel.org, monis@voltaire.com,
	gospo@cumulusnetworks.com, vfalico@gmail.com,
	davem@davemloft.net,
	Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Subject: Re: [PATCH net] bonding: fix bond dev flags after convert to arphrd_ether
Date: Wed, 15 Jul 2015 13:32:33 -0700	[thread overview]
Message-ID: <1817.1436992353@famine> (raw)
In-Reply-To: <1436990983-1406-1-git-send-email-razor@blackwall.org>

Nikolay Aleksandrov <razor@blackwall.org> wrote:

>From: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
>
>If a bonding device enslaves devices != arphrd_ether it'll change types
>and if later these devices are released, it can enslave an arphrd_ether
>device and switch back calling ether_setup() which resets dev->flags to
>IFF_BROADCAST|IFF_MULTICAST and clears IFF_MASTER which then could lead
>to many different bugs. This bug seems to have been there since the
>introduction of ether_setup() in bond_enslave().

	I thought the hack-around for the non-ethernet device problem
was that, for non-ARPHRD_ETHER devices, the bonding master device is
automatically destroyed when the last slave is released.

	This (well, this sort of thing) originally came up with IPoIB
devices needing different ops that would disappear if the ipoib module
was unloaded, so the bond master was deliberately unregistered when the
last slave was released.

	Looking at the code, at first glance this appears to still be
the case: bond_slave_netdev_event calls bond_release_and_destroy for !=
ARPHRD_ETHER, which in turn should unregister the bond itself if there
are no slaves left.  Is this no longer working as intended?

	-J


>Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
>Fixes: e36b9d16c6a6 ("bonding: clean muticast addresses when device changes type")
>---
> drivers/net/bonding/bond_main.c | 1 +
> 1 file changed, 1 insertion(+)
>
>diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
>index 317a49480475..8ba119896e55 100644
>--- a/drivers/net/bonding/bond_main.c
>+++ b/drivers/net/bonding/bond_main.c
>@@ -1368,6 +1368,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
> 				bond_setup_by_slave(bond_dev, slave_dev);
> 			else {
> 				ether_setup(bond_dev);
>+				bond_dev->flags |= IFF_MASTER;
> 				bond_dev->priv_flags &= ~IFF_TX_SKB_SHARING;
> 			}
> 
>-- 
>1.9.3
>

---
	-Jay Vosburgh, jay.vosburgh@canonical.com

  reply	other threads:[~2015-07-15 20:32 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-15 20:09 [PATCH net] bonding: fix bond dev flags after convert to arphrd_ether Nikolay Aleksandrov
2015-07-15 20:32 ` Jay Vosburgh [this message]
2015-07-15 20:34   ` Nikolay Aleksandrov
2015-08-28  2:07   ` Nikolay Aleksandrov
2015-08-28  3:39     ` Jay Vosburgh
2015-08-28 17:38       ` Nikolay Aleksandrov
2015-07-15 20:55 ` Nikolay Aleksandrov
2015-07-20 20:01   ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1817.1436992353@famine \
    --to=jay.vosburgh@canonical.com \
    --cc=davem@davemloft.net \
    --cc=gospo@cumulusnetworks.com \
    --cc=monis@voltaire.com \
    --cc=netdev@vger.kernel.org \
    --cc=nikolay@cumulusnetworks.com \
    --cc=razor@blackwall.org \
    --cc=vfalico@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).