netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Abeni <pabeni@redhat.com>
To: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>,
	Stephen Hemminger <stephen@networkplumber.org>,
	Pravin Shelar <pshelar@nicira.com>,
	Jesse Gross <jesse@kernel.org>, Flavio Leitner <fbl@sysclose.org>,
	Hannes Frederic Sowa <hannes@stressinduktion.org>
Subject: [PATCH net-next 5/5] veth: implement ndo_set_rx_headroom
Date: Tue, 23 Feb 2016 13:53:50 +0100	[thread overview]
Message-ID: <193cf433bb4b8dac52ca1a76477b651c47e01ed3.1456163137.git.pabeni@redhat.com> (raw)
In-Reply-To: <cover.1456163137.git.pabeni@redhat.com>

The rx headroom for veth dev is the peer device needed_headroom.
Avoid ping-pong updates setting the private flag IFF_PHONY_HEADROOM.

This avoids skb head reallocation when forwarding from a veth dev
towards a device adding some kind of encapsulation.

When forwarding frames below the MTU size towards a vxlan device,
this gives about 10% performance speed-up when OVS is used to connect
the veth and the vxlan device and a little more when using a
plain Linux bridge.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
---
 drivers/net/veth.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index ba21d07..4f30a6a 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -35,6 +35,7 @@ struct pcpu_vstats {
 struct veth_priv {
 	struct net_device __rcu	*peer;
 	atomic64_t		dropped;
+	unsigned		requested_headroom;
 };
 
 /*
@@ -271,6 +272,29 @@ static int veth_get_iflink(const struct net_device *dev)
 	return iflink;
 }
 
+static void veth_set_rx_headroom(struct net_device *dev, int new_hr)
+{
+	struct veth_priv *peer_priv, *priv = netdev_priv(dev);
+	struct net_device *peer;
+
+	if (new_hr < 0)
+		new_hr = 0;
+
+	rcu_read_lock();
+	peer = rcu_dereference(priv->peer);
+	if (unlikely(!peer))
+		goto out;
+
+	peer_priv = netdev_priv(peer);
+	priv->requested_headroom = new_hr;
+	new_hr = max(priv->requested_headroom, peer_priv->requested_headroom);
+	dev->needed_headroom = new_hr;
+	peer->needed_headroom = new_hr;
+
+out:
+	rcu_read_unlock();
+}
+
 static const struct net_device_ops veth_netdev_ops = {
 	.ndo_init            = veth_dev_init,
 	.ndo_open            = veth_open,
@@ -285,6 +309,7 @@ static const struct net_device_ops veth_netdev_ops = {
 #endif
 	.ndo_get_iflink		= veth_get_iflink,
 	.ndo_features_check	= passthru_features_check,
+	.ndo_set_rx_headroom	= veth_set_rx_headroom,
 };
 
 #define VETH_FEATURES (NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_ALL_TSO |    \
@@ -301,6 +326,7 @@ static void veth_setup(struct net_device *dev)
 	dev->priv_flags &= ~IFF_TX_SKB_SHARING;
 	dev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
 	dev->priv_flags |= IFF_NO_QUEUE;
+	dev->priv_flags |= IFF_PHONY_HEADROOM;
 
 	dev->netdev_ops = &veth_netdev_ops;
 	dev->ethtool_ops = &veth_ethtool_ops;
-- 
1.8.3.1

  parent reply	other threads:[~2016-02-23 12:54 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-23 12:53 [PATCH net-next 0/5] bridge/ovs: avoid skb head copy on frame forwarding Paolo Abeni
2016-02-23 12:53 ` [PATCH net-next 1/5] netdev: introduce ndo_set_rx_headroom Paolo Abeni
2016-02-23 19:20   ` pravin shelar
2016-02-24  8:37     ` Paolo Abeni
2016-02-23 12:53 ` [PATCH net-next 2/5] bridge: notify ensabled devices of headroom changes Paolo Abeni
2016-02-23 19:20   ` pravin shelar
2016-02-24  8:43     ` Paolo Abeni
2016-02-23 12:53 ` [PATCH net-next 3/5] ovs: propagate per dp max headroom to all vports Paolo Abeni
2016-02-23 19:20   ` pravin shelar
2016-02-24  8:59     ` Paolo Abeni
2016-02-23 12:53 ` [PATCH net-next 4/5] net/tun: implement ndo_set_rx_headroom Paolo Abeni
2016-02-25 10:49   ` Paolo Abeni
2016-02-23 12:53 ` Paolo Abeni [this message]
2016-02-23 19:21   ` [PATCH net-next 5/5] veth: " pravin shelar
2016-02-24  9:17     ` Paolo Abeni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=193cf433bb4b8dac52ca1a76477b651c47e01ed3.1456163137.git.pabeni@redhat.com \
    --to=pabeni@redhat.com \
    --cc=davem@davemloft.net \
    --cc=fbl@sysclose.org \
    --cc=hannes@stressinduktion.org \
    --cc=jesse@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pshelar@nicira.com \
    --cc=stephen@networkplumber.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).