From: "Krishnakumar. R" <krishnakumar@naturesoft.net>
To: jgarzik@pobox.com
Cc: netdev@oss.sgi.com, linux-net@vger.kernel.org
Subject: [PATCH] 8139too.c Network interface messages
Date: Thu, 9 Oct 2003 12:41:26 +0530 [thread overview]
Message-ID: <200310091241.26027.krishnakumar@naturesoft.net> (raw)
Hi,
This patch enables the network interface message
settings in the Realtek 8139 driver - 8139too.c.
The patch is against 2.6.0-test6 kernel.
It introduces the new variable in the private
structure of the 8139too (msg_enable) and
various debug printks can be activated
and deactivated (using the ethtool)
after the patch is applied.
The following kernel apis for the Network interface logging
has been introduced into the 8139too.c by this patch.
1. netif_msg_link
2. netif_msg_ifdown
3. netif_msg_ifup
4. netif_msg_rx_err
5. netif_msg_tx_err
6. netif_msg_tx_queued
7. netif_msg_intr
8. netif_msg_rx_status
>From this I have tested the 1,2,3,6,7 and 8 with
the ethtool.
Regards
KK
diffstat output:
--------------------
8139too.c | 50 ++++++++++++++++++++++++++++++++------------------
1 files changed, 32 insertions(+), 18 deletions(-)
The patch
---------------
--- linux-2.6.0-test6/drivers/net/8139too.orig.c 2003-09-28 06:20:05.000000000 +0530
+++ linux-2.6.0-test6/drivers/net/8139too.c 2003-10-09 12:12:40.787777240 +0530
@@ -117,6 +117,11 @@
#define RTL8139_DRIVER_NAME DRV_NAME " Fast Ethernet driver " DRV_VERSION
#define PFX DRV_NAME ": "
+/* Default Message level */
+#define RTL8139_DEF_MSG_ENABLE (NETIF_MSG_DRV | \
+ NETIF_MSG_PROBE | \
+ NETIF_MSG_LINK)
+
/* enable PIO instead of MMIO, if CONFIG_8139TOO_PIO is selected */
#ifdef CONFIG_8139TOO_PIO
@@ -557,6 +562,7 @@
int drv_flags;
struct pci_dev *pci_dev;
u32 pci_state[16];
+ u32 msg_enable;
struct net_device_stats stats;
unsigned char *rx_ring;
unsigned int cur_rx; /* Index into the Rx buffer of next Rx pkt. */
@@ -983,6 +989,7 @@
/* note: tp->chipset set in rtl8139_init_board */
tp->drv_flags = board_info[ent->driver_data].hw_flags;
tp->mmio_addr = ioaddr;
+ tp->msg_enable = (debug < 0 ? RTL8139_DEF_MSG_ENABLE : debug);
spin_lock_init (&tp->lock);
init_waitqueue_head (&tp->thr_wait);
init_completion (&tp->thr_exited);
@@ -1285,9 +1292,7 @@
{
struct rtl8139_private *tp = dev->priv;
int retval;
-#ifdef RTL8139_DEBUG
void *ioaddr = tp->mmio_addr;
-#endif
retval = request_irq (dev->irq, rtl8139_interrupt, SA_SHIRQ, dev->name, dev);
if (retval)
@@ -1317,7 +1322,8 @@
rtl8139_init_ring (dev);
rtl8139_hw_start (dev);
- DPRINTK ("%s: rtl8139_open() ioaddr %#lx IRQ %d"
+ if (netif_msg_ifup(tp))
+ printk(KERN_DEBUG "%s: rtl8139_open() ioaddr %#lx IRQ %d"
" GP Pins %2.2x %s-duplex.\n",
dev->name, pci_resource_start (tp->pci_dev, 1),
dev->irq, RTL_R8 (MediaStatus),
@@ -1334,7 +1340,7 @@
struct rtl8139_private *tp = dev->priv;
if (tp->phys[0] >= 0) {
- mii_check_media(&tp->mii, 1, init_media);
+ mii_check_media(&tp->mii, netif_msg_link(tp), init_media);
}
}
@@ -1717,8 +1723,9 @@
netif_stop_queue (dev);
spin_unlock_irq(&tp->lock);
- DPRINTK ("%s: Queued Tx packet size %u to slot %d.\n",
- dev->name, len, entry);
+ if (netif_msg_tx_queued(tp))
+ printk (KERN_DEBUG "%s: Queued Tx packet size %u to slot %d.\n",
+ dev->name, len, entry);
return 0;
}
@@ -1748,8 +1755,9 @@
/* Note: TxCarrierLost is always asserted at 100mbps. */
if (txstatus & (TxOutOfWindow | TxAborted)) {
/* There was an major error, log it. */
- DPRINTK ("%s: Transmit error, Tx status %8.8x.\n",
- dev->name, txstatus);
+ if (netif_msg_tx_err(tp))
+ printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
+ dev->name, txstatus);
tp->stats.tx_errors++;
if (txstatus & TxAborted) {
tp->stats.tx_aborted_errors++;
@@ -1804,8 +1812,9 @@
int tmp_work;
#endif
- DPRINTK ("%s: Ethernet frame had errors, status %8.8x.\n",
- dev->name, rx_status);
+ if (netif_msg_rx_err (tp))
+ printk(KERN_DEBUG "%s: Ethernet frame had errors, status %8.8x.\n",
+ dev->name, rx_status);
tp->stats.rx_errors++;
if (!(rx_status & RxStatusOK)) {
if (rx_status & RxTooLong) {
@@ -1909,8 +1918,9 @@
rx_size = rx_status >> 16;
pkt_size = rx_size - 4;
- DPRINTK ("%s: rtl8139_rx() status %4.4x, size %4.4x,"
- " cur %4.4x.\n", dev->name, rx_status,
+ if (netif_msg_rx_status(tp))
+ printk(KERN_DEBUG "%s: rtl8139_rx() status %4.4x, size %4.4x,"
+ " cur %4.4x.\n", dev->name, rx_status,
rx_size, cur_rx);
#if RTL8139_DEBUG > 2
{
@@ -2071,8 +2081,9 @@
ackstat = status & ~(RxAckBits | TxErr);
RTL_W16 (IntrStatus, ackstat);
- DPRINTK ("%s: interrupt status=%#4.4x ackstat=%#4.4x new intstat=%#4.4x.\n",
- dev->name, status, ackstat, RTL_R16 (IntrStatus));
+ if (netif_msg_intr(tp))
+ printk (KERN_DEBUG "%s: interrupt status=%#4.4x ackstat=%#4.4x new intstat=%#4.4x.\n",
+ dev->name, status, ackstat, RTL_R16 (IntrStatus));
if (netif_running (dev) && (status & RxAckBits))
rtl8139_rx_interrupt (dev, tp, ioaddr);
@@ -2127,8 +2138,9 @@
}
wait_for_completion (&tp->thr_exited);
}
-
- DPRINTK ("%s: Shutting down ethercard, status was 0x%4.4x.\n",
+
+ if (netif_msg_ifdown(tp))
+ printk(KERN_DEBUG "%s: Shutting down ethercard, status was 0x%4.4x.\n",
dev->name, RTL_R16 (IntrStatus));
spin_lock_irqsave (&tp->lock, flags);
@@ -2286,12 +2298,14 @@
static u32 rtl8139_get_msglevel(struct net_device *dev)
{
- return debug;
+ struct rtl8139_private *np = dev->priv;
+ return np->msg_enable;
}
static void rtl8139_set_msglevel(struct net_device *dev, u32 datum)
{
- debug = datum;
+ struct rtl8139_private *np = dev->priv;
+ np->msg_enable = datum;
}
/* TODO: we are too slack to do reg dumping for pio, for now */
reply other threads:[~2003-10-09 7:11 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200310091241.26027.krishnakumar@naturesoft.net \
--to=krishnakumar@naturesoft.net \
--cc=jgarzik@pobox.com \
--cc=linux-net@vger.kernel.org \
--cc=netdev@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).