From: Stephen Hemminger <shemminger@osdl.org>
To: jgarzik@pobox.com
Cc: netdev@oss.sgi.com
Subject: [PATCH] (17/42) wd
Date: Wed, 12 Nov 2003 16:43:08 -0800 [thread overview]
Message-ID: <200311130043.hAD0h8G30660@mail.osdl.org> (raw)
Based on viro NE41-wd
* switched wd to dynamic allocation
* wd: fixed order of freeing bugs
* wd: fixed resource leaks on failure exits
* wd: fixed clobbering on autoprobe
diff -Nru a/drivers/net/Space.c b/drivers/net/Space.c
--- a/drivers/net/Space.c Tue Nov 11 09:36:05 2003
+++ b/drivers/net/Space.c Tue Nov 11 09:36:05 2003
@@ -44,7 +44,7 @@
extern int hp100_probe(struct net_device *dev);
extern int ultra_probe(struct net_device *dev);
extern int ultra32_probe(struct net_device *dev);
-extern int wd_probe(struct net_device *dev);
+extern struct net_device *wd_probe(int unit);
extern struct net_device *el2_probe(int unit);
extern struct net_device *ne_probe(int unit);
extern struct net_device *hp_probe(int unit);
@@ -207,13 +207,13 @@
#ifdef CONFIG_ULTRA
{ultra_probe, 0},
#endif
-#ifdef CONFIG_WD80x3
- {wd_probe, 0},
-#endif
{NULL, 0},
};
static struct devprobe2 isa_probes2[] __initdata = {
+#ifdef CONFIG_WD80x3
+ {wd_probe, 0},
+#endif
#ifdef CONFIG_EL2 /* 3c503 */
{el2_probe, 0},
#endif
diff -Nru a/drivers/net/wd.c b/drivers/net/wd.c
--- a/drivers/net/wd.c Tue Nov 11 09:36:05 2003
+++ b/drivers/net/wd.c Tue Nov 11 09:36:05 2003
@@ -47,7 +47,6 @@
static unsigned int wd_portlist[] __initdata =
{0x300, 0x280, 0x380, 0x240, 0};
-int wd_probe(struct net_device *dev);
static int wd_probe1(struct net_device *dev, int ioaddr);
static int wd_open(struct net_device *dev);
@@ -83,11 +82,14 @@
The wd_probe1() routine initializes the card and fills the
station address field. */
-int __init wd_probe(struct net_device *dev)
+static int __init do_wd_probe(struct net_device *dev)
{
int i;
struct resource *r;
int base_addr = dev->base_addr;
+ int irq = dev->irq;
+ int mem_start = dev->mem_start;
+ int mem_end = dev->mem_end;
SET_MODULE_OWNER(dev);
@@ -115,11 +117,48 @@
return 0;
}
release_region(ioaddr, WD_IO_EXTENT);
+ dev->irq = irq;
+ dev->mem_start = mem_start;
+ dev->mem_end = mem_end;
}
return -ENODEV;
}
+static void cleanup_card(struct net_device *dev)
+{
+ free_irq(dev->irq, dev);
+ release_region(dev->base_addr - WD_NIC_OFFSET, WD_IO_EXTENT);
+ kfree(dev->priv);
+}
+
+struct net_device * __init wd_probe(int unit)
+{
+ struct net_device *dev = alloc_etherdev(0);
+ int err;
+
+ if (!dev)
+ return ERR_PTR(-ENOMEM);
+
+ sprintf(dev->name, "eth%d", unit);
+ netdev_boot_setup_check(dev);
+
+ dev->priv = NULL; /* until all 8390-based use alloc_etherdev() */
+
+ err = do_wd_probe(dev);
+ if (err)
+ goto out;
+ err = register_netdev(dev);
+ if (err)
+ goto out1;
+ return dev;
+out1:
+ cleanup_card(dev);
+out:
+ free_netdev(dev);
+ return ERR_PTR(err);
+}
+
static int __init wd_probe1(struct net_device *dev, int ioaddr)
{
int i;
@@ -446,7 +485,7 @@
\f
#ifdef MODULE
#define MAX_WD_CARDS 4 /* Max number of wd cards per module */
-static struct net_device dev_wd[MAX_WD_CARDS];
+static struct net_device *dev_wd[MAX_WD_CARDS];
static int io[MAX_WD_CARDS];
static int irq[MAX_WD_CARDS];
static int mem[MAX_WD_CARDS];
@@ -468,29 +507,36 @@
int
init_module(void)
{
+ struct net_device *dev;
int this_dev, found = 0;
for (this_dev = 0; this_dev < MAX_WD_CARDS; this_dev++) {
- struct net_device *dev = &dev_wd[this_dev];
- dev->irq = irq[this_dev];
- dev->base_addr = io[this_dev];
- dev->mem_start = mem[this_dev];
- dev->mem_end = mem_end[this_dev];
- dev->init = wd_probe;
if (io[this_dev] == 0) {
if (this_dev != 0) break; /* only autoprobe 1st one */
printk(KERN_NOTICE "wd.c: Presently autoprobing (not recommended) for a single card.\n");
}
- if (register_netdev(dev) != 0) {
- printk(KERN_WARNING "wd.c: No wd80x3 card found (i/o = 0x%x).\n", io[this_dev]);
- if (found != 0) { /* Got at least one. */
- return 0;
+ dev = alloc_etherdev(0);
+ if (!dev)
+ break;
+ dev->priv = NULL;
+ dev->irq = irq[this_dev];
+ dev->base_addr = io[this_dev];
+ dev->mem_start = mem[this_dev];
+ dev->mem_end = mem_end[this_dev];
+ if (do_wd_probe(dev) == 0) {
+ if (register_netdev(dev) == 0) {
+ dev_wd[found++] = dev;
+ continue;
}
- return -ENXIO;
+ cleanup_card(dev);
}
- found++;
+ free_netdev(dev);
+ printk(KERN_WARNING "wd.c: No wd80x3 card found (i/o = 0x%x).\n", io[this_dev]);
+ break;
}
- return 0;
+ if (found)
+ return 0;
+ return -ENXIO;
}
void
@@ -499,14 +545,11 @@
int this_dev;
for (this_dev = 0; this_dev < MAX_WD_CARDS; this_dev++) {
- struct net_device *dev = &dev_wd[this_dev];
- if (dev->priv != NULL) {
- void *priv = dev->priv;
- int ioaddr = dev->base_addr - WD_NIC_OFFSET;
- free_irq(dev->irq, dev);
- release_region(ioaddr, WD_IO_EXTENT);
+ struct net_device *dev = dev_wd[this_dev];
+ if (dev) {
unregister_netdev(dev);
- kfree(priv);
+ cleanup_card(dev);
+ free_netdev(dev);
}
}
}
next reply other threads:[~2003-11-13 0:43 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-13 0:43 Stephen Hemminger [this message]
2003-11-14 12:55 ` [PATCH] (17/42) wd Rask Ingemann Lambertsen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200311130043.hAD0h8G30660@mail.osdl.org \
--to=shemminger@osdl.org \
--cc=jgarzik@pobox.com \
--cc=netdev@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).