From: Stephen Hemminger <shemminger@osdl.org>
To: Jeff Garzik <jgarzik@pobox.com>,
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: netdev@oss.sgi.com
Subject: [PATCH] 8139too NAPI for net-drivers-2.5-exp
Date: Tue, 18 Nov 2003 16:17:30 -0800 [thread overview]
Message-ID: <20031118161730.2690cb76.shemminger@osdl.org> (raw)
Here is the 8139too version in net-drivers-2.5-exp modified for NAPI.
Also:
64k receive ring - has to handle wrap for that case;
the NoWrap flag does nothing if using this big ring.
assert() -> BUG_ON()
To deal with the races with tx_timeout, put back in the rx_lock from earlier versions.
diff -Nru a/drivers/net/8139too.c b/drivers/net/8139too.c
--- a/drivers/net/8139too.c Tue Nov 18 16:16:59 2003
+++ b/drivers/net/8139too.c Tue Nov 18 16:16:59 2003
@@ -92,7 +92,7 @@
*/
#define DRV_NAME "8139too"
-#define DRV_VERSION "0.9.26"
+#define DRV_VERSION "0.9.27"
#include <linux/config.h>
@@ -128,9 +128,11 @@
#define USE_IO_OPS 1
#endif
-/* use a 16K rx ring buffer instead of the default 32K */
-#ifdef CONFIG_SH_DREAMCAST
+/* use a 16K rx ring buffer instead of the default 64K */
+#if defined(CONFIG_SH_DREAMCAST) || defined(CONFIG_EMBEDDED)
#define USE_BUF16K 1
+#else
+#define USE_BUF64K 1
#endif
/* define to 1 to enable copious debugging info */
@@ -150,11 +152,7 @@
#ifdef RTL8139_NDEBUG
# define assert(expr) do {} while (0)
#else
-# define assert(expr) \
- if(!(expr)) { \
- printk( "Assertion failed! %s,%s,%s,line=%d\n", \
- #expr,__FILE__,__FUNCTION__,__LINE__); \
- }
+# define assert(expr) BUG_ON((expr) == 0)
#endif
@@ -164,9 +162,6 @@
static int media[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
-/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
-static int max_interrupt_work = 20;
-
/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
The RTL chips use a 64 element hash table based on the Ethernet CRC. */
static int multicast_filter_limit = 32;
@@ -175,15 +170,23 @@
static int debug = -1;
/* Size of the in-memory receive ring. */
+/* 0==8K, 1==16K, 2==32K, 3==64K */
#ifdef USE_BUF16K
-#define RX_BUF_LEN_IDX 1 /* 0==8K, 1==16K, 2==32K, 3==64K */
+#define RX_BUF_LEN_IDX 1
+#elif defined(USE_BUF32K)
+#define RX_BUF_LEN_IDX 2
#else
-#define RX_BUF_LEN_IDX 2 /* 0==8K, 1==16K, 2==32K, 3==64K */
+#define RX_BUF_LEN_IDX 3
#endif
+
#define RX_BUF_LEN (8192 << RX_BUF_LEN_IDX)
#define RX_BUF_PAD 16
#define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */
+#ifdef USE_BUF64K
+#define RX_BUF_TOT_LEN RX_BUF_LEN
+#else
#define RX_BUF_TOT_LEN (RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
+#endif
/* Number of Tx descriptor registers. */
#define NUM_TX_DESC 4
@@ -455,7 +458,7 @@
RxCfgRcv32K = (1 << 12),
RxCfgRcv64K = (1 << 11) | (1 << 12),
- /* Disable packet wrap at end of Rx buffer */
+ /* Disable packet wrap at end of Rx buffer. (not possible with 64k) */
RxNoWrap = (1 << 7),
};
@@ -580,6 +583,7 @@
char twistie, twist_row, twist_col; /* Twister tune state. */
unsigned int default_port:4; /* Last dev->if_port value. */
spinlock_t lock;
+ spinlock_t rx_lock;
chip_t chipset;
pid_t thr_pid;
wait_queue_head_t thr_wait;
@@ -596,13 +600,11 @@
MODULE_LICENSE("GPL");
MODULE_PARM (multicast_filter_limit, "i");
-MODULE_PARM (max_interrupt_work, "i");
MODULE_PARM (media, "1-" __MODULE_STRING(MAX_UNITS) "i");
MODULE_PARM (full_duplex, "1-" __MODULE_STRING(MAX_UNITS) "i");
MODULE_PARM (debug, "i");
MODULE_PARM_DESC (debug, "8139too bitmapped message enable number");
MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered multicast addresses");
-MODULE_PARM_DESC (max_interrupt_work, "8139too maximum events handled per interrupt");
MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps");
MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)");
@@ -616,6 +618,7 @@
static void rtl8139_init_ring (struct net_device *dev);
static int rtl8139_start_xmit (struct sk_buff *skb,
struct net_device *dev);
+static int rtl8139_poll(struct net_device *dev, int *budget);
static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance,
struct pt_regs *regs);
static int rtl8139_close (struct net_device *dev);
@@ -688,16 +691,27 @@
PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver |
TxErr | TxOK | RxErr | RxOK;
+static const u16 rtl8139_norx_intr_mask =
+ PCIErr | PCSTimeout | RxUnderrun |
+ TxErr | TxOK | RxErr ;
+
#ifdef USE_BUF16K
static const unsigned int rtl8139_rx_config =
RxCfgRcv16K | RxNoWrap |
(RX_FIFO_THRESH << RxCfgFIFOShift) |
(RX_DMA_BURST << RxCfgDMAShift);
-#else
+#elif defined(USE_BUF32K)
static const unsigned int rtl8139_rx_config =
RxCfgRcv32K | RxNoWrap |
(RX_FIFO_THRESH << RxCfgFIFOShift) |
(RX_DMA_BURST << RxCfgDMAShift);
+#elif defined(USE_BUF64K)
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv64K |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#else
+#error "Need to define receive buffer window"
#endif
static const unsigned int rtl8139_tx_config =
@@ -874,9 +888,7 @@
match:
DPRINTK ("chipset id (%d) == index %d, '%s'\n",
- tmp,
- tp->chipset,
- rtl_chip_info[tp->chipset].name);
+ version, i, rtl_chip_info[i].name);
if (tp->chipset >= CH_8139B) {
u8 new_tmp8 = tmp8 = RTL_R8 (Config1);
@@ -970,6 +982,8 @@
/* The Rtl8139-specific entries in the device structure. */
dev->open = rtl8139_open;
dev->hard_start_xmit = rtl8139_start_xmit;
+ dev->poll = rtl8139_poll;
+ dev->weight = 64;
dev->stop = rtl8139_close;
dev->get_stats = rtl8139_get_stats;
dev->set_multicast_list = rtl8139_set_rx_mode;
@@ -995,6 +1009,7 @@
tp->msg_enable =
(debug < 0 ? RTL8139_DEF_MSG_ENABLE : ((1 << debug) - 1));
spin_lock_init (&tp->lock);
+ spin_lock_init (&tp->rx_lock);
init_waitqueue_head (&tp->thr_wait);
init_completion (&tp->thr_exited);
tp->mii.dev = dev;
@@ -1638,7 +1653,7 @@
}
}
-static void rtl8139_tx_clear (struct rtl8139_private *tp)
+static inline void rtl8139_tx_clear (struct rtl8139_private *tp)
{
tp->cur_tx = 0;
tp->dirty_tx = 0;
@@ -1668,6 +1683,7 @@
if (tmp8 & CmdTxEnb)
RTL_W8 (ChipCmd, CmdRxEnb);
+ spin_lock(&tp->rx_lock);
/* Disable interrupts by clearing the interrupt mask. */
RTL_W16 (IntrMask, 0x0000);
@@ -1686,9 +1702,12 @@
spin_unlock_irqrestore (&tp->lock, flags);
/* ...and finally, reset everything */
- rtl8139_hw_start (dev);
-
- netif_wake_queue (dev);
+ if (netif_running(dev)) {
+ rtl8139_hw_start (dev);
+ netif_wake_queue (dev);
+ }
+ spin_unlock(&tp->rx_lock);
+
}
@@ -1702,6 +1721,7 @@
/* Calculate the next Tx descriptor entry. */
entry = tp->cur_tx % NUM_TX_DESC;
+ /* Note: the chip doesn't have auto-pad! */
if (likely(len < TX_BUF_SIZE)) {
if (len < ETH_ZLEN)
memset(tp->tx_buf[entry], 0, ETH_ZLEN);
@@ -1713,7 +1733,6 @@
return 0;
}
- /* Note: the chip doesn't have auto-pad! */
spin_lock_irq(&tp->lock);
RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
@@ -1801,8 +1820,7 @@
if (tp->dirty_tx != dirty_tx) {
tp->dirty_tx = dirty_tx;
mb();
- if (netif_queue_stopped (dev))
- netif_wake_queue (dev);
+ netif_wake_queue (dev);
}
}
@@ -1890,30 +1908,41 @@
#endif
}
-static void rtl8139_rx_interrupt (struct net_device *dev,
- struct rtl8139_private *tp, void *ioaddr)
+static __inline__ void wrap_copy(struct sk_buff *skb, const unsigned char *ring,
+ u32 offset, unsigned int size)
{
- unsigned char *rx_ring;
- u16 cur_rx;
+#ifdef USE_BUF64K
+ u32 left = RX_BUF_LEN - offset;
- assert (dev != NULL);
- assert (tp != NULL);
- assert (ioaddr != NULL);
+ if (size > left) {
+ memcpy(skb->data, ring + offset, left);
+ memcpy(skb->data+left, ring, size - left);
+ } else
+#endif
+ memcpy(skb->data, ring + offset, size);
+}
- rx_ring = tp->rx_ring;
- cur_rx = tp->cur_rx;
+static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
+ int budget)
+{
+ void *ioaddr = tp->mmio_addr;
+ int received = 0;
+ const unsigned char *rx_ring = tp->rx_ring;
+ unsigned int cur_rx = tp->cur_rx;
DPRINTK ("%s: In rtl8139_rx(), current %4.4x BufAddr %4.4x,"
" free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx,
RTL_R16 (RxBufAddr),
RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
- while ((RTL_R8 (ChipCmd) & RxBufEmpty) == 0) {
- int ring_offset = cur_rx % RX_BUF_LEN;
+ while (netif_running(dev) && received < budget
+ && (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) {
+ u32 ring_offset = cur_rx % RX_BUF_LEN;
u32 rx_status;
unsigned int rx_size;
unsigned int pkt_size;
struct sk_buff *skb;
+ u16 status;
rmb();
@@ -1941,9 +1970,9 @@
* Theoretically, this should never happen
* since EarlyRx is disabled.
*/
- if (rx_size == 0xfff0) {
+ if (unlikely(rx_size == 0xfff0)) {
tp->xstats.early_rx++;
- break;
+ goto done;
}
/* If Rx err or invalid rx_size/rx_status received
@@ -1951,55 +1980,66 @@
* Rx process gets reset, so we abort any further
* Rx processing.
*/
- if ((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
- (rx_size < 8) ||
- (!(rx_status & RxStatusOK))) {
+ if (unlikely((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
+ (rx_size < 8) ||
+ (!(rx_status & RxStatusOK)))) {
rtl8139_rx_err (rx_status, dev, tp, ioaddr);
- return;
+ return -1;
}
/* Malloc up new buffer, compatible with net-2e. */
/* Omit the four octet CRC from the length. */
- /* TODO: consider allocating skb's outside of
- * interrupt context, both to speed interrupt processing,
- * and also to reduce the chances of having to
- * drop packets here under memory pressure.
- */
-
skb = dev_alloc_skb (pkt_size + 2);
- if (skb) {
+ if (likely(skb)) {
skb->dev = dev;
skb_reserve (skb, 2); /* 16 byte align the IP fields. */
+ wrap_copy(skb, rx_ring, ring_offset+4, pkt_size);
- eth_copy_and_sum (skb, &rx_ring[ring_offset + 4], pkt_size, 0);
skb_put (skb, pkt_size);
skb->protocol = eth_type_trans (skb, dev);
- netif_rx (skb);
+
dev->last_rx = jiffies;
tp->stats.rx_bytes += pkt_size;
tp->stats.rx_packets++;
+
+ netif_receive_skb (skb);
} else {
- printk (KERN_WARNING
- "%s: Memory squeeze, dropping packet.\n",
- dev->name);
+ if (net_ratelimit())
+ printk (KERN_WARNING
+ "%s: Memory squeeze, dropping packet.\n",
+ dev->name);
tp->stats.rx_dropped++;
}
+ received++;
cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
- RTL_W16 (RxBufPtr, cur_rx - 16);
+ RTL_W16 (RxBufPtr, (u16) (cur_rx - 16));
- if (RTL_R16 (IntrStatus) & RxAckBits)
+ /* Clear out errors and receive interrupts */
+ status = RTL_R16 (IntrStatus) & RxAckBits;
+ if (likely(status != 0)) {
+ if (unlikely(status & (RxFIFOOver | RxOverflow))) {
+ tp->stats.rx_errors++;
+ if (status & RxFIFOOver)
+ tp->stats.rx_fifo_errors++;
+ }
RTL_W16_F (IntrStatus, RxAckBits);
+ }
}
+ done:
+
+#if RTL8139_DEBUG > 1
DPRINTK ("%s: Done rtl8139_rx(), current %4.4x BufAddr %4.4x,"
" free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx,
RTL_R16 (RxBufAddr),
RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
+#endif
tp->cur_rx = cur_rx;
+ return received;
}
@@ -2025,14 +2065,12 @@
status &= ~RxUnderrun;
}
- /* XXX along with rtl8139_rx_err, are we double-counting errors? */
- if (status &
- (RxUnderrun | RxOverflow | RxErr | RxFIFOOver))
+ if (status & (RxUnderrun | RxErr))
tp->stats.rx_errors++;
if (status & PCSTimeout)
tp->stats.rx_length_errors++;
- if (status & (RxUnderrun | RxFIFOOver))
+ if (status & RxUnderrun)
tp->stats.rx_fifo_errors++;
if (status & PCIErr) {
u16 pci_cmd_status;
@@ -2044,6 +2082,39 @@
}
}
+static int rtl8139_poll(struct net_device *dev, int *budget)
+{
+ struct rtl8139_private *tp = dev->priv;
+ void *ioaddr = tp->mmio_addr;
+ int orig_budget = min(*budget, dev->quota);
+ int done = 1;
+
+ spin_lock(&tp->rx_lock);
+ if (likely(RTL_R16(IntrStatus) & RxAckBits)) {
+ int work_done;
+
+ work_done = rtl8139_rx(dev, tp, orig_budget);
+ if (likely(work_done > 0)) {
+ *budget -= work_done;
+ dev->quota -= work_done;
+ done = (work_done < orig_budget);
+ }
+ }
+
+ if (done) {
+ /*
+ * Order is important since data can get interrupted
+ * again when we think we are done.
+ */
+ local_irq_disable();
+ netif_rx_complete(dev);
+ RTL_W16_F(IntrMask, rtl8139_intr_mask);
+ local_irq_enable();
+ }
+ spin_unlock(&tp->rx_lock);
+
+ return !done;
+}
/* The interrupt handler does all of the Rx thread work and cleans up
after the Tx thread. */
@@ -2052,69 +2123,59 @@
{
struct net_device *dev = (struct net_device *) dev_instance;
struct rtl8139_private *tp = dev->priv;
- int boguscnt = max_interrupt_work;
void *ioaddr = tp->mmio_addr;
- int ackstat, status;
+ u16 status, ackstat;
int link_changed = 0; /* avoid bogus "uninit" warning */
int handled = 0;
spin_lock (&tp->lock);
+ status = RTL_R16 (IntrStatus);
- do {
- status = RTL_R16 (IntrStatus);
+ /* shared irq? */
+ if (unlikely((status & rtl8139_intr_mask) == 0))
+ goto out;
- /* h/w no longer present (hotplug?) or major error, bail */
- if (status == 0xFFFF)
- break;
+ handled = 1;
- if ((status &
- (PCIErr | PCSTimeout | RxUnderrun | RxOverflow |
- RxFIFOOver | TxErr | TxOK | RxErr | RxOK)) == 0)
- break;
+ /* h/w no longer present (hotplug?) or major error, bail */
+ if (unlikely(status == 0xFFFF))
+ goto out;
- handled = 1;
+ /* close possible race's with dev_close */
+ if (unlikely(!netif_running(dev))) {
+ RTL_W16 (IntrMask, 0);
+ goto out;
+ }
- /* Acknowledge all of the current interrupt sources ASAP, but
- an first get an additional status bit from CSCR. */
- if (status & RxUnderrun)
- link_changed = RTL_R16 (CSCR) & CSCR_LinkChangeBit;
+ /* Acknowledge all of the current interrupt sources ASAP, but
+ an first get an additional status bit from CSCR. */
+ if (unlikely(status & RxUnderrun))
+ link_changed = RTL_R16 (CSCR) & CSCR_LinkChangeBit;
- /* The chip takes special action when we clear RxAckBits,
- * so we clear them later in rtl8139_rx_interrupt
- */
- ackstat = status & ~(RxAckBits | TxErr);
+ ackstat = status & ~(RxAckBits | TxErr);
+ if (ackstat)
RTL_W16 (IntrStatus, ackstat);
- if (netif_msg_intr(tp))
- printk (KERN_DEBUG "%s: interrupt status=%#4.4x ackstat=%#4.4x new intstat=%#4.4x.\n",
- dev->name, status, ackstat, RTL_R16 (IntrStatus));
-
- if (netif_running (dev) && (status & RxAckBits))
- rtl8139_rx_interrupt (dev, tp, ioaddr);
-
- /* Check uncommon events with one test. */
- if (status & (PCIErr | PCSTimeout | RxUnderrun | RxOverflow |
- RxFIFOOver | RxErr))
- rtl8139_weird_interrupt (dev, tp, ioaddr,
- status, link_changed);
-
- if (netif_running (dev) && (status & (TxOK | TxErr))) {
- rtl8139_tx_interrupt (dev, tp, ioaddr);
- if (status & TxErr)
- RTL_W16 (IntrStatus, TxErr);
+ /* Receive packets are processed by poll routine.
+ If not running start it now. */
+ if (status & RxAckBits){
+ if (netif_rx_schedule_prep(dev)) {
+ RTL_W16_F (IntrMask, rtl8139_norx_intr_mask);
+ __netif_rx_schedule (dev);
}
-
- boguscnt--;
- } while (boguscnt > 0);
-
- if (boguscnt <= 0) {
- printk (KERN_WARNING "%s: Too much work at interrupt, "
- "IntrStatus=0x%4.4x.\n", dev->name, status);
-
- /* Clear all interrupt sources. */
- RTL_W16 (IntrStatus, 0xffff);
}
+ /* Check uncommon events with one test. */
+ if (unlikely(status & (PCIErr | PCSTimeout | RxUnderrun | RxErr)))
+ rtl8139_weird_interrupt (dev, tp, ioaddr,
+ status, link_changed);
+
+ if (status & (TxOK | TxErr)) {
+ rtl8139_tx_interrupt (dev, tp, ioaddr);
+ if (status & TxErr)
+ RTL_W16 (IntrStatus, TxErr);
+ }
+ out:
spin_unlock (&tp->lock);
DPRINTK ("%s: exiting interrupt, intr_status=%#4.4x.\n",
next reply other threads:[~2003-11-19 0:17 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-19 0:17 Stephen Hemminger [this message]
2003-11-19 17:16 ` [PATCH] 8139too NAPI for net-drivers-2.5-exp Jeff Garzik
2003-11-19 19:02 ` OGAWA Hirofumi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20031118161730.2690cb76.shemminger@osdl.org \
--to=shemminger@osdl.org \
--cc=hirofumi@mail.parknet.co.jp \
--cc=jgarzik@pobox.com \
--cc=netdev@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).