* Re: Debian #240812 - tg3 problems with NFS
[not found] <20040819161933.GA27114@lst.de>
@ 2004-08-19 17:06 ` Christoph Hellwig
2004-08-19 17:29 ` David S. Miller
0 siblings, 1 reply; 3+ messages in thread
From: Christoph Hellwig @ 2004-08-19 17:06 UTC (permalink / raw)
To: davem; +Cc: netdev, stigge
Sorry, should have Cc'ed netdev and the submitter
On Thu, Aug 19, 2004 at 06:19:33PM +0200, Christoph Hellwig wrote:
> Hi Dave,
>
> I got the following report from Roland Stigge. He later mentioned 2.6.7
> still has this issue. There's also a full trail of the Debian bug at
> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=240812, but because
> some zealots abused it as flameware about firmware inside drivers that
> one is pretty much useless.
>
> ----------------------------------------------------------------------------
> Hi,
>
> I always needed to use the separate driver from the bcm5700-source
> package for my NIC. tg3 from the current 2.6.4 kernel only works to a
> certain extent. I can browse the web (-> HTTP, DNS), ping etc. But NFS
> doesn't work. When I mount something, I get the following syslog lines:
>
> =============================================================================
> Mar 29 13:23:13 atari kernel: nfs warning: mount version older than kernel
> Mar 29 13:24:30 atari kernel: nfs: server sbo not responding, still trying
> =============================================================================
>
> Please note that I get the first line also with bcm5700. The second
> line doesn't appear before the volume is already mounted and I cd'd to a
> directory inside it. An "ls" makes the second line appear after some
> seconds, and the terminal with the "ls" hangs without printing anything
> further.
>
> The attachments in this mail show the kern.log for the bcm5700 and tg3
> case.
>
> "lspci -vv" says the following:
> =============================================================================
> [...]
> 0000:02:05.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702 Gigabit Ethernet (rev 02)
> Subsystem: Asustek Computer, Inc.: Unknown device 80a9
> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (16000ns min), Cache Line
> Size: 0x10 (64 bytes)
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at ed800000 (64-bit, non-prefetchable)
> [disabled] [size=f1e70000]
> Expansion ROM at 00010000 [disabled]
> Capabilities: [40] PCI-X non-bridge device.
> Command: DPERE- ERO- RBC=0 OST=0
> Status: Bus=255 Dev=31 Func=1 64bit+ 133MHz+ SCD- USC-, DC=simple, DMMRBC=2, DMOST=0, DMCRS=1, RSCEM-
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
> Capabilities: [50] Vital Product Data
> Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
> Address: dfffffbfedfffcfc Data: fdff
> [...]
> =============================================================================
>
> bootlog for the bcm5700 driver is at:
> http://bugs.debian.org/cgi-bin/bugreport.cgi/kern.log.bcm5700?bug=240812&msg=6&att=1
>
> bootlog for tg3 is at:
> http://bugs.debian.org/cgi-bin/bugreport.cgi/kern.log.tg3?bug=240812&msg=6&att=2
>
---end quoted text---
^ permalink raw reply [flat|nested] 3+ messages in thread