From: Francois Romieu <romieu@fr.zoreil.com>
To: jgarzik@pobox.com
Cc: netdev@oss.sgi.com, akpm@osdl.org
Subject: [PATCH 2.6.9-rc3-mm2 1/5] r8169: Tx timeout rework
Date: Mon, 4 Oct 2004 21:48:26 +0200 [thread overview]
Message-ID: <20041004194826.GA18404@electric-eye.fr.zoreil.com> (raw)
Tx timeout rework:
- the ring descriptors of the chipset and the ring index of the driver
are synced during a reset of the device;
- rtl8169_interrupt: rtl8169_hw_reset() replaces the previous stop code.
An implicit reset of the device is added but it makes no noticeable
difference with the former behavior (i.e.: stop the chipset).
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
diff -puN drivers/net/r8169.c~r8169-200 drivers/net/r8169.c
--- linux-2.6.9-rc3/drivers/net/r8169.c~r8169-200 2004-10-04 21:13:45.000000000 +0200
+++ linux-2.6.9-rc3-fr/drivers/net/r8169.c 2004-10-04 21:15:41.000000000 +0200
@@ -400,6 +400,7 @@ struct rtl8169_private {
void (*phy_reset_enable)(void *);
unsigned int (*phy_reset_pending)(void *);
unsigned int (*link_ok)(void *);
+ struct work_struct task;
};
MODULE_AUTHOR("Realtek");
@@ -420,6 +421,8 @@ static int rtl8169_close(struct net_devi
static void rtl8169_set_rx_mode(struct net_device *dev);
static void rtl8169_tx_timeout(struct net_device *dev);
static struct net_device_stats *rtl8169_get_stats(struct net_device *netdev);
+static int rtl8169_rx_interrupt(struct net_device *, struct rtl8169_private *,
+ void *);
#ifdef CONFIG_R8169_NAPI
static int rtl8169_poll(struct net_device *dev, int *budget);
#endif
@@ -1456,6 +1459,8 @@ rtl8169_open(struct net_device *dev)
if (retval < 0)
goto err_free_rx;
+ INIT_WORK(&tp->task, NULL, dev);
+
rtl8169_hw_start(dev);
rtl8169_request_timer(dev);
@@ -1475,6 +1480,18 @@ err_free_irq:
goto out;
}
+static void rtl8169_hw_reset(void *ioaddr)
+{
+ /* Disable interrupts */
+ RTL_W16(IntrMask, 0x0000);
+
+ /* Reset the chipset */
+ RTL_W8(ChipCmd, CmdReset);
+
+ /* PCI commit */
+ RTL_R8(ChipCmd);
+}
+
static void
rtl8169_hw_start(struct net_device *dev)
{
@@ -1518,8 +1535,6 @@ rtl8169_hw_start(struct net_device *dev)
RTL_W16(CPlusCmd, tp->cp_cmd);
}
- tp->cur_rx = 0;
-
RTL_W32(TxDescStartAddrLow, ((u64) tp->TxPhyAddr & DMA_32BIT_MASK));
RTL_W32(TxDescStartAddrHigh, ((u64) tp->TxPhyAddr >> 32));
RTL_W32(RxDescAddrLow, ((u64) tp->RxPhyAddr & DMA_32BIT_MASK));
@@ -1634,12 +1649,16 @@ static inline void rtl8169_mark_as_last_
desc->opts1 |= cpu_to_le32(RingEnd);
}
+static void rtl8169_init_ring_indexes(struct rtl8169_private *tp)
+{
+ tp->dirty_tx = tp->dirty_rx = tp->cur_tx = tp->cur_rx = 0;
+}
+
static int rtl8169_init_ring(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
- tp->cur_rx = tp->dirty_rx = 0;
- tp->cur_tx = tp->dirty_tx = 0;
+ rtl8169_init_ring_indexes(tp);
memset(tp->tx_skb, 0x0, NUM_TX_DESC * sizeof(struct ring_info));
memset(tp->Rx_skbuff, 0x0, NUM_RX_DESC * sizeof(struct sk_buff *));
@@ -1691,31 +1710,53 @@ static void rtl8169_tx_clear(struct rtl8
tp->cur_tx = tp->dirty_tx = 0;
}
-static void
-rtl8169_tx_timeout(struct net_device *dev)
+static void rtl8169_schedule_work(struct net_device *dev, void (*task)(void *))
{
struct rtl8169_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
- u8 tmp8;
- printk(KERN_INFO "%s: TX Timeout\n", dev->name);
- /* disable Tx, if not already */
- tmp8 = RTL_R8(ChipCmd);
- if (tmp8 & CmdTxEnb)
- RTL_W8(ChipCmd, tmp8 & ~CmdTxEnb);
+ PREPARE_WORK(&tp->task, task, dev);
+ schedule_delayed_work(&tp->task, 4);
+}
- /* Disable interrupts by clearing the interrupt mask. */
- RTL_W16(IntrMask, 0x0000);
+static void rtl8169_reset_task(void *_data)
+{
+ struct net_device *dev = _data;
+ struct rtl8169_private *tp = netdev_priv(dev);
- /* Stop a shared interrupt from scavenging while we are. */
- spin_lock_irq(&tp->lock);
+ if (!netif_running(dev))
+ return;
+
+ synchronize_irq(dev->irq);
+
+ /* Wait for any pending NAPI task to complete */
+ netif_poll_disable(dev);
+
+ rtl8169_rx_interrupt(dev, tp, tp->mmio_addr);
rtl8169_tx_clear(tp);
- spin_unlock_irq(&tp->lock);
- /* ...and finally, reset everything */
- rtl8169_hw_start(dev);
+ if (tp->dirty_rx == tp->cur_rx) {
+ rtl8169_init_ring_indexes(tp);
+ rtl8169_hw_start(dev);
+ netif_wake_queue(dev);
+ } else {
+ if (net_ratelimit()) {
+ printk(PFX KERN_EMERG "%s: Rx buffers shortage\n",
+ dev->name);
+ }
+ rtl8169_schedule_work(dev, rtl8169_reset_task);
+ }
+}
+
+static void rtl8169_tx_timeout(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ printk(KERN_INFO "%s: TX Timeout\n", dev->name);
- netif_wake_queue(dev);
+ rtl8169_hw_reset(tp->mmio_addr);
+
+ /* Let's wait a bit while any (async) irq lands on */
+ rtl8169_schedule_work(dev, rtl8169_reset_task);
}
static int rtl8169_xmit_frags(struct rtl8169_private *tp, struct sk_buff *skb,
@@ -2057,9 +2098,7 @@ rtl8169_interrupt(int irq, void *dev_ins
if (unlikely(status & SYSErr)) {
printk(KERN_ERR PFX "%s: PCI error (status: 0x%04x)."
" Device disabled.\n", dev->name, status);
- RTL_W8(ChipCmd, 0x00);
- RTL_W16(IntrMask, 0x0000);
- RTL_R16(IntrMask);
+ rtl8169_hw_reset(ioaddr);
break;
}
@@ -2138,6 +2177,8 @@ rtl8169_close(struct net_device *dev)
netif_stop_queue(dev);
+ flush_scheduled_work();
+
rtl8169_delete_timer(dev);
spin_lock_irq(&tp->lock);
_
next reply other threads:[~2004-10-04 19:48 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-10-04 19:48 Francois Romieu [this message]
2004-10-04 19:49 ` [PATCH 2.6.9-rc3-mm2 2/5] r8169: wrong advertisement of VLAN features Francois Romieu
2004-10-04 19:50 ` [PATCH 2.6.9-rc3-mm2 3/5] r8169: automatic pci dac step down Francois Romieu
2004-10-04 19:52 ` [PATCH 2.6.9-rc3-mm2 4/5] r8169: rtl8169_close() races Francois Romieu
2004-10-04 19:53 ` [PATCH 2.6.9-rc3-mm2 5/5] r8169: cleanup Francois Romieu
2004-10-04 20:47 ` [PATCH 2.6.9-rc3-mm2 1/5] r8169: Tx timeout rework Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20041004194826.GA18404@electric-eye.fr.zoreil.com \
--to=romieu@fr.zoreil.com \
--cc=akpm@osdl.org \
--cc=jgarzik@pobox.com \
--cc=netdev@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).