PATCH: netpoll with xircom_cb

PATCH: netpoll with xircom_cb

[Petr Konecny]

Hi,

I have a headless computer with xircom pcmcia card and needed netconsole
on it. After looking around in other drivers I concocted this patch.  It
survived light testing. I have no documentation for the hw, so it maybe
totally bogus. What do you think ?

                                                        Petr

lspci -v of the card is:
0000:02:00.1 Serial controller: Xircom Cardbus Ethernet + 56k Modem (rev 03) (prog-if 02 [16550])
        Subsystem: Xircom CBEM56G-100 Ethernet + 56k Modem
        Flags: medium devsel, IRQ 11
        I/O ports at 4080 [size=8]
        Memory at 10801000 (32-bit, non-prefetchable) [size=2K]
        Memory at 10801800 (32-bit, non-prefetchable) [size=2K]
        Expansion ROM at 10404000 [disabled] [size=16K]
        Capabilities: [dc] Power Management version 1

--- linux-2.6.8.1/drivers/net/tulip/xircom_cb.c	2004-08-13 22:37:38.000000000 -0700
+++ work/drivers/net/tulip/xircom_cb.c	2004-10-13 18:54:34.000000000 -0700
@@ -117,6 +117,9 @@
 static int xircom_close(struct net_device *dev);
 static void xircom_up(struct xircom_private *card);
 static struct net_device_stats *xircom_get_stats(struct net_device *dev);
+#if CONFIG_NET_POLL_CONTROLLER
+static void xircom_poll_controller(struct net_device *dev);
+#endif
 
 static void investigate_read_descriptor(struct net_device *dev,struct xircom_private *card, int descnr, unsigned int bufferoffset);
 static void investigate_write_descriptor(struct net_device *dev, struct xircom_private *card, int descnr, unsigned int bufferoffset);
@@ -269,6 +272,9 @@
 	dev->stop = &xircom_close;
 	dev->get_stats = &xircom_get_stats;
 	dev->priv = private;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	dev->poll_controller = &xircom_poll_controller;
+#endif
 	SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
 	pci_set_drvdata(pdev, dev);
 
@@ -500,6 +506,14 @@
 } 
                                                  
 
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void xircom_poll_controller(struct net_device *dev)
+{
+	disable_irq(dev->irq);
+	xircom_interrupt(dev->irq, dev, NULL);
+	enable_irq(dev->irq);
+}
+#endif
 
 
 static void initialize_card(struct xircom_private *card)

Re: PATCH: netpoll with xircom_cb

[Petr Konecny]

 Arjan> On Thu, Oct 14, 2004 at 03:52:46AM +0200, Petr Konecny wrote:
 >> Hi,
 >> 
 >> I have a headless computer with xircom pcmcia card and needed netconsole
 >> on it. After looking around in other drivers I concocted this patch.  It
 >> survived light testing. I have no documentation for the hw, so it maybe
 >> totally bogus. What do you think ?

 Arjan> looks correct to me,however I have one remark

 >> +#ifdef CONFIG_NET_POLL_CONTROLLER
 >> +static void xircom_poll_controller(struct net_device *dev)
 >> +{
 >> +	disable_irq(dev->irq);
 >> +	xircom_interrupt(dev->irq, dev, NULL);
 >> +	enable_irq(dev->irq);
 >> +}
 >> +#endif
AFAICS all other drivers call the interrupt routine. They differ only in
disabling interrupts: some use local_irq_disable, some don't disable it
at all, because of a spinlock taken in the interrupt routine. Perhaps
the latter would work with xircom_cb.

 Arjan> I think you want to call investigate_read_descriptor() and
 Arjan> investigate_read_descriptor() instead of this.
But this works too, at least with netconsole. Patch on top of the last
one.

                                             Petr

--- 2.6old/drivers/net/tulip/xircom_cb.c	2004-10-13 18:49:59.000000000 -0700
+++ 2.6/drivers/net/tulip/xircom_cb.c	2004-10-14 07:55:08.000000000 -0700
@@ -509,9 +509,17 @@
 #ifdef CONFIG_NET_POLL_CONTROLLER
 static void xircom_poll_controller(struct net_device *dev)
 {
-	disable_irq(dev->irq);
-	xircom_interrupt(dev->irq, dev, NULL);
-	enable_irq(dev->irq);
+	struct xircom_private *card = netdev_priv(dev);
+	int i;
+
+	enter("xircom_poll");
+	spin_lock(&card->lock);
+	for (i=0;i<NUMDESCRIPTORS;i++) 
+		investigate_write_descriptor(dev,card,i,bufferoffsets[i]);
+	for (i=0;i<NUMDESCRIPTORS;i++) 
+		investigate_read_descriptor(dev,card,i,bufferoffsets[i]);
+	spin_unlock(&card->lock);
+	leave("xircom_poll");
 }
 #endif
 

Re: PATCH: netpoll with xircom_cb

[Matt Mackall]

On Thu, Oct 14, 2004 at 04:41:10AM +0200, Petr Konecny wrote:
> Hi,
> 
> I have a headless computer with xircom pcmcia card and needed netconsole
> on it. After looking around in other drivers I concocted this patch.  It
> survived light testing. I have no documentation for the hw, so it maybe
> totally bogus. What do you think ?

Looks good to me.

In general, this generic approach is fine. We can sometimes avoid the
heavyweight IRQ manipulation by using internal driver locking, but
this is generally not a performance-critical path. 

Jeff, did you take this one?

-- 
Mathematics is the supreme nostalgia of our time.

Re: PATCH: netpoll with xircom_cb

[Jeff Garzik]

Matt Mackall wrote:
> On Thu, Oct 14, 2004 at 04:41:10AM +0200, Petr Konecny wrote:
> 
>>Hi,
>>
>>I have a headless computer with xircom pcmcia card and needed netconsole
>>on it. After looking around in other drivers I concocted this patch.  It
>>survived light testing. I have no documentation for the hw, so it maybe
>>totally bogus. What do you think ?
> 
> 
> Looks good to me.
> 
> In general, this generic approach is fine. We can sometimes avoid the
> heavyweight IRQ manipulation by using internal driver locking, but
> this is generally not a performance-critical path. 
> 
> Jeff, did you take this one?


yes