From: Jouni Malinen <jkmaline@cc.hut.fi>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: netdev@oss.sgi.com
Subject: [PATCH wireless-2.6 10/12] Host AP: Use void * instead of unsigned long with {read,write}{b,w}
Date: Sun, 7 Nov 2004 23:16:30 -0800 [thread overview]
Message-ID: <20041108071630.GK1076@jm.kir.nu> (raw)
In-Reply-To: <20041108070156.GA1076@jm.kir.nu>
Start using void * instead of unsigned long with {read,write}{b,w} to
silence compiler warning with Linux 2.6.9-rc2.
Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi>
diff -Nru a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c
--- a/drivers/net/wireless/hostap/hostap_pci.c 2004-11-07 22:39:06 -08:00
+++ b/drivers/net/wireless/hostap/hostap_pci.c 2004-11-07 22:39:06 -08:00
@@ -56,7 +56,7 @@
spin_lock_irqsave(&local->lock, flags);
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v);
- writeb(v, dev->mem_start + a);
+ writeb(v, (void *) dev->mem_start + a);
spin_unlock_irqrestore(&local->lock, flags);
}
@@ -68,7 +68,7 @@
u8 v;
spin_lock_irqsave(&local->lock, flags);
- v = readb(dev->mem_start + a);
+ v = readb((void *) dev->mem_start + a);
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INB, a, v);
spin_unlock_irqrestore(&local->lock, flags);
return v;
@@ -82,7 +82,7 @@
spin_lock_irqsave(&local->lock, flags);
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v);
- writew(v, dev->mem_start + a);
+ writew(v, (void *) dev->mem_start + a);
spin_unlock_irqrestore(&local->lock, flags);
}
@@ -94,7 +94,7 @@
u16 v;
spin_lock_irqsave(&local->lock, flags);
- v = readw(dev->mem_start + a);
+ v = readw((void *) dev->mem_start + a);
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INW, a, v);
spin_unlock_irqrestore(&local->lock, flags);
return v;
@@ -109,12 +109,14 @@
#else /* PRISM2_IO_DEBUG */
-#define HFA384X_OUTB(v,a) writeb((v), dev->mem_start + (a))
-#define HFA384X_INB(a) (u8) readb(dev->mem_start + (a))
-#define HFA384X_OUTW(v,a) writew((v), dev->mem_start + (a))
-#define HFA384X_INW(a) (u16) readw(dev->mem_start + (a))
-#define HFA384X_OUTW_DATA(v,a) writew(cpu_to_le16(v), dev->mem_start + (a))
-#define HFA384X_INW_DATA(a) (u16) le16_to_cpu(readw(dev->mem_start + (a)))
+#define HFA384X_OUTB(v,a) writeb((v), (void *) dev->mem_start + (a))
+#define HFA384X_INB(a) (u8) readb((void *) dev->mem_start + (a))
+#define HFA384X_OUTW(v,a) writew((v), (void *) dev->mem_start + (a))
+#define HFA384X_INW(a) (u16) readw((void *) dev->mem_start + (a))
+#define HFA384X_OUTW_DATA(v,a) \
+ writew(cpu_to_le16(v), (void *) dev->mem_start + (a))
+#define HFA384X_INW_DATA(a) (u16) \
+ le16_to_cpu(readw((void *) dev->mem_start + (a)))
#endif /* PRISM2_IO_DEBUG */
diff -Nru a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c
--- a/drivers/net/wireless/hostap/hostap_plx.c 2004-11-07 22:39:06 -08:00
+++ b/drivers/net/wireless/hostap/hostap_plx.c 2004-11-07 22:39:06 -08:00
@@ -247,7 +247,7 @@
/* Set sreset bit of COR and clear it after hold time */
- if (local->attr_mem == 0) {
+ if (local->attr_mem == NULL) {
/* TMD7160 - COR at card's first I/O addr */
corsave = inb(local->cor_offset);
outb(corsave | COR_SRESET, local->cor_offset);
@@ -271,7 +271,7 @@
{
unsigned char corsave;
- if (local->attr_mem == 0) {
+ if (local->attr_mem == NULL) {
/* TMD7160 - COR at card's first I/O addr */
corsave = inb(local->cor_offset);
outb(corsave | COR_SRESET, local->cor_offset);
@@ -306,7 +306,7 @@
};
-static int prism2_plx_check_cis(unsigned long attr_mem, int attr_len,
+static int prism2_plx_check_cis(void *attr_mem, int attr_len,
unsigned int *cor_offset,
unsigned int *cor_index)
{
@@ -401,7 +401,7 @@
unsigned int pccard_ioaddr, plx_ioaddr;
unsigned long pccard_attr_mem;
unsigned int pccard_attr_len;
- unsigned long attr_mem = 0;
+ void *attr_mem = NULL;
unsigned int cor_offset, cor_index;
u32 reg;
local_info_t *local = NULL;
@@ -422,7 +422,7 @@
if (tmd7160) {
/* TMD7160 */
- attr_mem = 0; /* no access to PC Card attribute memory */
+ attr_mem = NULL; /* no access to PC Card attribute memory */
printk(KERN_INFO "TMD7160 PCI/PCMCIA adapter: io=0x%x, "
"irq=%d, pccard_io=0x%x\n",
@@ -448,9 +448,8 @@
goto fail;
- attr_mem = (unsigned long) ioremap(pccard_attr_mem,
- pccard_attr_len);
- if (!attr_mem) {
+ attr_mem = ioremap(pccard_attr_mem, pccard_attr_len);
+ if (attr_mem == NULL) {
printk(KERN_ERR "%s: cannot remap attr_mem\n",
dev_info);
goto fail;
@@ -532,7 +531,7 @@
free_irq(dev->irq, dev);
if (attr_mem)
- iounmap((void *) attr_mem);
+ iounmap(attr_mem);
pci_disable_device(pdev);
@@ -550,7 +549,7 @@
hfa384x_disable_interrupts(dev);
if (iface->local->attr_mem)
- iounmap((void *) iface->local->attr_mem);
+ iounmap(iface->local->attr_mem);
if (dev->irq)
free_irq(dev->irq, dev);
diff -Nru a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h
--- a/drivers/net/wireless/hostap/hostap_wlan.h 2004-11-07 22:39:06 -08:00
+++ b/drivers/net/wireless/hostap/hostap_wlan.h 2004-11-07 22:39:06 -08:00
@@ -895,7 +895,7 @@
#endif /* PRISM2_PCCARD */
#ifdef PRISM2_PLX
- unsigned long attr_mem;
+ void *attr_mem;
unsigned int cor_offset;
#endif /* PRISM2_PLX */
--
Jouni Malinen PGP id EFC895FA
next prev parent reply other threads:[~2004-11-08 7:16 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-11-08 7:01 [PATCH wireless-2.6 0/12] Host AP update Jouni Malinen
2004-11-08 7:10 ` [PATCH wireless-2.6 1/12] Host AP: Disable EAPOL TX/RX debug messages Jouni Malinen
2004-11-09 7:40 ` Jeff Garzik
2004-11-08 7:11 ` [PATCH wireless-2.6 2/12] Host AP: Fix interface packet counters Jouni Malinen
2004-11-08 7:12 ` [PATCH wireless-2.6 3/12] Host AP: Ignore (Re)AssocResp messages silently Jouni Malinen
2004-11-08 7:12 ` [PATCH wireless-2.6 4/12] Host AP: Remove ioctl debug messages Jouni Malinen
2004-11-08 7:13 ` [PATCH wireless-2.6 5/12] Host AP: Fix hw address changing for wifi# interface Jouni Malinen
2004-11-08 7:13 ` [PATCH wireless-2.6 6/12] Host AP: Prevent STAs from associating using AP address Jouni Malinen
2004-11-08 7:14 ` [PATCH wireless-2.6 7/12] Host AP: Fix compilation with PRISM2_NO_STATION_MODES defined Jouni Malinen
2004-11-08 7:14 ` [PATCH wireless-2.6 8/12] Host AP: Do not bridge packets to unauthorized ports Jouni Malinen
2004-11-08 7:15 ` [PATCH wireless-2.6 9/12] Host AP: Fix card enabling after firmware download Jouni Malinen
2004-11-08 7:16 ` Jouni Malinen [this message]
2004-11-09 7:29 ` [PATCH wireless-2.6 10/12] Host AP: Use void * instead of unsigned long with {read,write}{b,w} Jeff Garzik
2004-11-14 5:18 ` [PATCH wireless-2.6 10/16] Host AP: Use void __iomem * " Jouni Malinen
2004-11-14 23:49 ` Jeff Garzik
2004-11-08 7:17 ` [PATCH wireless-2.6 11/12] Host AP: Fix PRISM2_IO_DEBUG Jouni Malinen
2004-11-09 7:29 ` Jeff Garzik
2004-11-14 5:20 ` [PATCH wireless-2.6 11/16] " Jouni Malinen
2004-11-08 7:17 ` [PATCH wireless-2.6 12/12] Host AP: Fix netif_carrier_off() in non-client modes Jouni Malinen
2004-11-09 8:04 ` [PATCH wireless-2.6 0/12] Host AP update Jeff Garzik
2004-11-09 9:09 ` Michael Renzmann
2004-11-09 15:26 ` Jeff Garzik
2004-11-09 21:32 ` Vladimir Kondratiev
2004-11-14 5:15 ` Jouni Malinen
2004-11-14 5:21 ` [PATCH wireless-2.6 12/16] Host AP: Fix netif_carrier_off() in non-client modes Jouni Malinen
2004-11-14 5:22 ` [PATCH wireless-2.6 13/16] Host AP: pci_register_driver() return value changes Jouni Malinen
2004-11-14 5:23 ` [PATCH wireless-2.6 14/16] Host AP: Updated to use Linux wireless extensions v17 Jouni Malinen
2004-11-14 5:24 ` [PATCH wireless-2.6 15/16] Host AP: Replaced direct dev->priv references with netdev_priv(dev) Jouni Malinen
2004-11-14 5:25 ` [PATCH wireless-2.6 16/16] Host AP: Replaced MODULE_PARM with module_param* Jouni Malinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20041108071630.GK1076@jm.kir.nu \
--to=jkmaline@cc.hut.fi \
--cc=jgarzik@pobox.com \
--cc=netdev@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).