From: Roland Dreier <roland@topspin.com>
To: linux-kernel@vger.kernel.org
Cc: netdev@oss.sgi.com, openib-general@openib.org
Subject: [PATCH][RFC/v1][7/12] IPoIB IPv6 support
Date: Mon, 22 Nov 2004 07:13:59 -0800 [thread overview]
Message-ID: <20041122713.FnSlYodJYum7s82D@topspin.com> (raw)
In-Reply-To: <20041122713.Md0y3UqVvYcRT3Zf@topspin.com>
Add ipv6_ib_mc_map() to convert IPv6 multicast addresses to IPoIB
hardware addresses, and add support for autoconfiguration for devices
with type ARPHRD_INFINIBAND.
The mapping for multicast addresses is described in
http://www.ietf.org/internet-drafts/draft-ietf-ipoib-ip-over-infiniband-07.txt
Signed-off-by: Nitin Hande <Nitin.Hande@Sun.Com>
Signed-off-by: Roland Dreier <roland@topspin.com>
Index: linux-bk/include/net/if_inet6.h
===================================================================
--- linux-bk.orig/include/net/if_inet6.h 2004-11-21 21:07:35.126269616 -0800
+++ linux-bk/include/net/if_inet6.h 2004-11-21 21:25:56.386835692 -0800
@@ -266,5 +266,20 @@
{
buf[0] = 0x00;
}
+
+static inline void ipv6_ib_mc_map(struct in6_addr *addr, char *buf)
+{
+ buf[0] = 0; /* Reserved */
+ buf[1] = 0xff; /* Multicast QPN */
+ buf[2] = 0xff;
+ buf[3] = 0xff;
+ buf[4] = 0xff;
+ buf[5] = 0x12; /* link local scope */
+ buf[6] = 0x60; /* IPv6 signature */
+ buf[7] = 0x1b;
+ buf[8] = 0; /* P_Key */
+ buf[9] = 0;
+ memcpy(buf + 10, addr->s6_addr + 6, 10);
+}
#endif
#endif
Index: linux-bk/net/ipv6/addrconf.c
===================================================================
--- linux-bk.orig/net/ipv6/addrconf.c 2004-11-21 21:07:29.222146392 -0800
+++ linux-bk/net/ipv6/addrconf.c 2004-11-21 21:25:56.387835544 -0800
@@ -48,6 +48,7 @@
#include <linux/netdevice.h>
#include <linux/if_arp.h>
#include <linux/if_arcnet.h>
+#include <linux/if_infiniband.h>
#include <linux/route.h>
#include <linux/inetdevice.h>
#include <linux/init.h>
@@ -1098,6 +1099,12 @@
memset(eui, 0, 7);
eui[7] = *(u8*)dev->dev_addr;
return 0;
+ case ARPHRD_INFINIBAND:
+ if (dev->addr_len != INFINIBAND_ALEN)
+ return -1;
+ memcpy(eui, dev->dev_addr + 12, 8);
+ eui[0] |= 2;
+ return 0;
}
return -1;
}
@@ -1797,6 +1804,7 @@
if ((dev->type != ARPHRD_ETHER) &&
(dev->type != ARPHRD_FDDI) &&
(dev->type != ARPHRD_IEEE802_TR) &&
+ (dev->type != ARPHRD_INFINIBAND) &&
(dev->type != ARPHRD_ARCNET)) {
/* Alas, we support only Ethernet autoconfiguration. */
return;
Index: linux-bk/net/ipv6/ndisc.c
===================================================================
--- linux-bk.orig/net/ipv6/ndisc.c 2004-11-21 21:07:06.642499599 -0800
+++ linux-bk/net/ipv6/ndisc.c 2004-11-21 21:25:56.388835395 -0800
@@ -260,6 +260,9 @@
case ARPHRD_ARCNET:
ipv6_arcnet_mc_map(addr, buf);
return 0;
+ case ARPHRD_INFINIBAND:
+ ipv6_ib_mc_map(addr, buf);
+ return 0;
default:
if (dir) {
memcpy(buf, dev->broadcast, dev->addr_len);
next prev parent reply other threads:[~2004-11-22 15:13 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20041122713.cSeT4UFKGqJDdZ8T@topspin.com>
2004-11-22 15:13 ` [PATCH][RFC/v1][6/12] IPoIB IPv4 multicast Roland Dreier
2004-11-22 15:13 ` Roland Dreier [this message]
2004-11-22 15:14 ` *****SPAM***** [PATCH][RFC/v1][8/12] Add IPoIB (IP-over-InfiniBand) driver Roland Dreier
2004-11-22 19:40 ` Sam Ravnborg
2004-11-22 22:34 ` Greg KH
2004-11-22 23:18 ` Roland Dreier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20041122713.FnSlYodJYum7s82D@topspin.com \
--to=roland@topspin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@oss.sgi.com \
--cc=openib-general@openib.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).