[3/14] Orinoco driver updates - use mdelay()/ssleep() more

[David Gibson <hermes-xT8FGy+AXnRB3Ne2BGzF6laj5H9X9Tb+@public.gmane.org>]

Use mdelay() or ssleep() instead of various silly more complicated
ways of delaying in the orinoco driver.

Signed-off-by: David Gibson <hermes-xT8FGy+AXnRB3Ne2BGzF6laj5H9X9Tb+@public.gmane.org>

Index: working-2.6/drivers/net/wireless/orinoco_pci.c
===================================================================
--- working-2.6.orig/drivers/net/wireless/orinoco_pci.c	2005-01-12 15:13:18.819073992 +1100
+++ working-2.6/drivers/net/wireless/orinoco_pci.c	2005-01-12 15:15:33.137654464 +1100
@@ -151,19 +151,11 @@
 
 	/* Assert the reset until the card notice */
 	hermes_write_regn(hw, PCI_COR, HERMES_PCI_COR_MASK);
-	timeout = jiffies + (HERMES_PCI_COR_ONT * HZ / 1000);
-	while(time_before(jiffies, timeout)) {
-		mdelay(1);
-	}
-	//mdelay(HERMES_PCI_COR_ONT);
+	mdelay(HERMES_PCI_COR_ONT);
 
 	/* Give time for the card to recover from this hard effort */
 	hermes_write_regn(hw, PCI_COR, 0x0000);
-	timeout = jiffies + (HERMES_PCI_COR_OFFT * HZ / 1000);
-	while(time_before(jiffies, timeout)) {
-		mdelay(1);
-	}
-	//mdelay(HERMES_PCI_COR_OFFT);
+	mdelay(HERMES_PCI_COR_OFFT);
 
 	/* The card is ready when it's no longer busy */
 	timeout = jiffies + (HERMES_PCI_COR_BUSYT * HZ / 1000);
Index: working-2.6/drivers/net/wireless/orinoco_plx.c
===================================================================
--- working-2.6.orig/drivers/net/wireless/orinoco_plx.c	2005-01-12 15:13:18.821073688 +1100
+++ working-2.6/drivers/net/wireless/orinoco_plx.c	2005-01-12 15:15:33.138654312 +1100
@@ -356,8 +356,7 @@
 static void __exit orinoco_plx_exit(void)
 {
 	pci_unregister_driver(&orinoco_plx_driver);
-	current->state = TASK_UNINTERRUPTIBLE;
-	schedule_timeout(HZ);
+	ssleep(1);
 }
 
 module_init(orinoco_plx_init);
Index: working-2.6/drivers/net/wireless/orinoco_tmd.c
===================================================================
--- working-2.6.orig/drivers/net/wireless/orinoco_tmd.c	2005-01-12 15:13:18.820073840 +1100
+++ working-2.6/drivers/net/wireless/orinoco_tmd.c	2005-01-12 15:16:05.897674184 +1100
@@ -225,8 +225,7 @@
 static void __exit orinoco_tmd_exit(void)
 {
 	pci_unregister_driver(&orinoco_tmd_driver);
-	current->state = TASK_UNINTERRUPTIBLE;
-	schedule_timeout(HZ);
+	ssleep(1);
 }
 
 module_init(orinoco_tmd_init);


-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist.  NOT _the_ _other_ _way_
				| _around_!
http://www.ozlabs.org/people/dgibson


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click