Netdev List
 help / color / mirror / Atom feed
From: Daniele Venzano <webvenza@libero.it>
To: netdev@oss.sgi.com, jgarzik@pobox.com
Subject: [PATCH 1/2] More ethtool support for sis900 and warning fix
Date: Sat, 12 Mar 2005 11:39:40 +0100 (CET)	[thread overview]
Message-ID: <20050312103939.27851.24067@localhost.localdomain> (raw)

[-- Attachment #1: Type: text/plain, Size: 236 bytes --]


Add support to sis900 for the following ethtool ops:
	- get_link
	- get_settings
	- set_settings
	- nway_reset

Rediff against Linus' 2.6.11-bk7 of the patches sent some days ago.


Signed-off-by: Daniele Venzano <webvenza@libero.it>


[-- Attachment #2: Type: text/plain, Size: 3590 bytes --]

Index: sis900.c
===================================================================
--- a/drivers/net/sis900.c	(revision 101)
+++ b/drivers/net/sis900.c	(revision 102)
@@ -162,6 +162,7 @@ struct sis900_private {
 	struct mii_phy * mii;
 	struct mii_phy * first_mii; /* record the first mii structure */
 	unsigned int cur_phy;
+	struct mii_if_info mii_info;
 
 	struct timer_list timer; /* Link status detection timer. */
 	u8 autong_complete; /* 1: auto-negotiate complete  */
@@ -201,7 +202,7 @@ static int sis900_open(struct net_device
 static int sis900_mii_probe (struct net_device * net_dev);
 static void sis900_init_rxfilter (struct net_device * net_dev);
 static u16 read_eeprom(long ioaddr, int location);
-static u16 mdio_read(struct net_device *net_dev, int phy_id, int location);
+static int mdio_read(struct net_device *net_dev, int phy_id, int location);
 static void mdio_write(struct net_device *net_dev, int phy_id, int location, int val);
 static void sis900_timer(unsigned long data);
 static void sis900_check_mode (struct net_device *net_dev, struct mii_phy *mii_phy);
@@ -476,7 +477,13 @@ static int __devinit sis900_probe(struct
 		sis_priv->msg_enable = sis900_debug;
 	else
 		sis_priv->msg_enable = SIS900_DEF_MSG;
-		
+
+	sis_priv->mii_info.dev = net_dev;
+	sis_priv->mii_info.mdio_read = mdio_read;
+	sis_priv->mii_info.mdio_write = mdio_write;
+	sis_priv->mii_info.phy_id_mask = 0x1f;
+	sis_priv->mii_info.reg_num_mask = 0x1f;
+
 	/* Get Mac address according to the chip revision */
 	pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &(sis_priv->chipset_rev));
 	if(netif_msg_probe(sis_priv))
@@ -723,6 +730,8 @@ static u16 sis900_default_phy(struct net
 		       pci_name(sis_priv->pci_dev), sis_priv->cur_phy);
 	}
 	
+	sis_priv->mii_info.phy_id = sis_priv->cur_phy;
+
 	status = mdio_read(net_dev, sis_priv->cur_phy, MII_CONTROL);
 	status &= (~MII_CNTL_ISOLATE);
 
@@ -850,7 +859,7 @@ static void mdio_reset(long mdio_addr)
  *	Please see SiS7014 or ICS spec
  */
 
-static u16 mdio_read(struct net_device *net_dev, int phy_id, int location)
+static int mdio_read(struct net_device *net_dev, int phy_id, int location)
 {
 	long mdio_addr = net_dev->base_addr + mear;
 	int mii_cmd = MIIread|(phy_id<<MIIpmdShift)|(location<<MIIregShift);
@@ -1964,10 +1973,47 @@ static void sis900_set_msglevel(struct n
 	sis_priv->msg_enable = value;
 }
 
+static u32 sis900_get_link(struct net_device *net_dev)
+{
+	struct sis900_private *sis_priv = net_dev->priv;
+	return mii_link_ok(&sis_priv->mii_info);
+}
+
+static int sis900_get_settings(struct net_device *net_dev,
+				struct ethtool_cmd *cmd)
+{
+	struct sis900_private *sis_priv = net_dev->priv;
+	spin_lock_irq(&sis_priv->lock);
+	mii_ethtool_gset(&sis_priv->mii_info, cmd);
+	spin_unlock_irq(&sis_priv->lock);
+	return 0;
+}
+
+static int sis900_set_settings(struct net_device *net_dev,
+				struct ethtool_cmd *cmd)
+{
+	struct sis900_private *sis_priv = net_dev->priv;
+	int rt;
+	spin_lock_irq(&sis_priv->lock);
+	rt = mii_ethtool_sset(&sis_priv->mii_info, cmd);
+	spin_unlock_irq(&sis_priv->lock);
+	return rt;
+}
+
+static int sis900_nway_reset(struct net_device *net_dev)
+{
+	struct sis900_private *sis_priv = net_dev->priv;
+	return mii_nway_restart(&sis_priv->mii_info);
+}
+
 static struct ethtool_ops sis900_ethtool_ops = {
 	.get_drvinfo 	= sis900_get_drvinfo,
 	.get_msglevel	= sis900_get_msglevel,
 	.set_msglevel	= sis900_set_msglevel,
+	.get_link	= sis900_get_link,
+	.get_settings	= sis900_get_settings,
+	.set_settings	= sis900_set_settings,
+	.nway_reset	= sis900_nway_reset,
 };
 
 /**

             reply	other threads:[~2005-03-12 10:39 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-03-12 10:39 Daniele Venzano [this message]
2005-03-12 10:39 ` [PATCH 2/2] More ethtool support for sis900 and warning fix Daniele Venzano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20050312103939.27851.24067@localhost.localdomain \
    --to=webvenza@libero.it \
    --cc=jgarzik@pobox.com \
    --cc=netdev@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox