From: "Dale Farnsworth" <dale@farnsworth.org>
To: Netdev <netdev@oss.sgi.com>, Jeff Garzik <jgarzik@pobox.com>
Cc: Ralf Baechle <ralf@linux-mips.org>,
Manish Lachwani <mlachwani@mvista.com>,
Brian Waite <brian@waitefamily.us>,
"Steven J. Hill" <sjhill@realitydiluted.com>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
James Chapman <jchapman@katalix.com>
Subject: mv643xx(5/20): update ppc7d platform for new mv643xx_eth platform data
Date: Mon, 28 Mar 2005 16:45:44 -0700 [thread overview]
Message-ID: <20050328234544.GE29098@xyzzy> (raw)
In-Reply-To: <20050328233807.GA28423@xyzzy>
This patch updates the ethernet device platform data of Radstone
PPC7D.
Signed-off-by: James Chapman <jchapman@katalix.com>
Acked-by: Dale Farnsworth <dale@farnsworth.org>
Index: linux-2.6/arch/ppc/platforms/radstone_ppc7d.c
===================================================================
--- linux-2.6.orig/arch/ppc/platforms/radstone_ppc7d.c 2005-03-27 15:09:33.000000000 +0100
+++ linux-2.6/arch/ppc/platforms/radstone_ppc7d.c 2005-03-27 15:29:58.000000000 +0100
@@ -41,6 +41,7 @@
#include <linux/serial_core.h>
#include <linux/mv643xx.h>
#include <linux/netdevice.h>
+#include <linux/ethtool.h>
#include <asm/system.h>
#include <asm/pgtable.h>
@@ -638,21 +639,30 @@
#endif
#if defined(CONFIG_MV643XX_ETH)
+static struct ethtool_cmd ppc7d_ethtool_cmd[] = {
+ [0] = {
+ .phy_address = PPC7D_ETH0_PHY_ADDR,
+ .autoneg = AUTONEG_ENABLE,
+ },
+ [1] = {
+ .phy_address = PPC7D_ETH1_PHY_ADDR,
+ .autoneg = AUTONEG_ENABLE,
+ },
+ [2] = {
+ .phy_address = PPC7D_ETH2_PHY_ADDR,
+ .autoneg = AUTONEG_ENABLE,
+ }
+};
+
static void __init ppc7d_fixup_eth_pdata(struct platform_device *pdev)
{
struct mv643xx_eth_platform_data *eth_pd;
- static u16 phy_addr[] = {
- PPC7D_ETH0_PHY_ADDR,
- PPC7D_ETH1_PHY_ADDR,
- PPC7D_ETH2_PHY_ADDR,
- };
int i;
eth_pd = pdev->dev.platform_data;
- eth_pd->force_phy_addr = 1;
- eth_pd->phy_addr = phy_addr[pdev->id];
eth_pd->tx_queue_size = PPC7D_ETH_TX_QUEUE_SIZE;
eth_pd->rx_queue_size = PPC7D_ETH_RX_QUEUE_SIZE;
+ eth_pd->ethtool_cmd = &ppc7d_ethtool_cmd[pdev->id];
/* Adjust IRQ by mv64360_irq_base */
for (i = 0; i < pdev->num_resources; i++) {
@@ -665,7 +675,6 @@
(int)r->start);
}
}
-
}
#endif
next prev parent reply other threads:[~2005-03-28 23:45 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-28 23:38 [PATCH: 2.6.12-rc1] mv643xx: ethernet driver updates Dale Farnsworth
2005-03-28 23:40 ` mv643xx(1/20): Add mv643xx_enet support for PPC Pegasos platform Dale Farnsworth
2005-03-28 23:42 ` mv643xx(2/20): use MII library for PHY management Dale Farnsworth
2005-08-24 0:34 ` Mark Huth
2005-08-24 0:33 ` Benjamin Herrenschmidt
2005-03-28 23:43 ` mv643xx(3/20): use MII library for ethtool functions Dale Farnsworth
2005-03-28 23:44 ` mv643xx(4/20): Update the Artesyn katana mv643xx ethernet platform data Dale Farnsworth
2005-03-28 23:45 ` Dale Farnsworth [this message]
2005-03-28 23:46 ` mv643xx(6/20): use netif_msg_xxx() to control log messages where appropriate Dale Farnsworth
2005-03-28 23:47 ` mv643xx(7/20): move static prototypes from header file into driver C file Dale Farnsworth
2005-03-28 23:48 ` mv643xx(8/20): remove ETH_FUNC_RET_STATUS and unused ETH_TARGET enums Dale Farnsworth
2005-03-28 23:49 ` mv643xx(9/20): make internal functions take device pointer param consistently Dale Farnsworth
2005-03-28 23:49 ` mv643xx(10/20): compile fix for non-NAPI case Dale Farnsworth
2005-03-28 23:51 ` mv643xx(11/20): rename all functions to have a common mv643xx_eth prefix Dale Farnsworth
2005-03-28 23:55 ` mv643xx(12/20): reorder code to avoid prototype function declarations Dale Farnsworth
2005-03-28 23:55 ` mv643xx(13/20): remove useless function header block comments Dale Farnsworth
2005-03-28 23:56 ` mv643xx(14/20): whitespace and indentation cleanup Dale Farnsworth
2005-03-28 23:57 ` mv643xx(15/20): Add James Chapman to copyright statement and author list Dale Farnsworth
2005-03-28 23:57 ` mv643xx(16/20): Limit MTU to 1500 bytes unless connected at GigE speed Dale Farnsworth
2005-03-30 20:09 ` Jeff Garzik
2005-03-30 21:46 ` Dale Farnsworth
2005-03-28 23:58 ` mv643xx(17/20): Reset the PHY only at driver open time Dale Farnsworth
2005-03-28 23:59 ` mv643xx(18/20): Isolate the PHY at device close Dale Farnsworth
2005-03-29 0:00 ` mv643xx(19/20): Ensure NAPI poll routine only clears IRQs it handles Dale Farnsworth
2005-03-29 0:01 ` mv643xx(20/20): Fix promiscuous mode handling Dale Farnsworth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050328234544.GE29098@xyzzy \
--to=dale@farnsworth.org \
--cc=benh@kernel.crashing.org \
--cc=brian@waitefamily.us \
--cc=jchapman@katalix.com \
--cc=jgarzik@pobox.com \
--cc=mlachwani@mvista.com \
--cc=netdev@oss.sgi.com \
--cc=ralf@linux-mips.org \
--cc=sjhill@realitydiluted.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).