From: Adrian Bunk <bunk@stusta.de>
To: jgarzik@pobox.com
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [2.6 patch] drivers/net/s2io.c: make functions static
Date: Sun, 6 Nov 2005 01:46:47 +0100 [thread overview]
Message-ID: <20051106004647.GD3668@stusta.de> (raw)
This patch makes needlessly global functions static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
drivers/net/s2io.c | 43 +++++++++++++++++++++++--------------------
1 file changed, 23 insertions(+), 20 deletions(-)
--- linux-2.6.14-rc5-mm1-full/drivers/net/s2io.c.old 2005-11-06 00:19:48.000000000 +0100
+++ linux-2.6.14-rc5-mm1-full/drivers/net/s2io.c 2005-11-06 00:25:39.000000000 +0100
@@ -1515,7 +1515,7 @@
#define LINK_UP_DOWN_INTERRUPT 1
#define MAC_RMAC_ERR_TIMER 2
-int s2io_link_fault_indication(nic_t *nic)
+static int s2io_link_fault_indication(nic_t *nic)
{
if (nic->intr_type != INTA)
return MAC_RMAC_ERR_TIMER;
@@ -1847,7 +1847,7 @@
*
*/
-void fix_mac_address(nic_t * sp)
+static void fix_mac_address(nic_t * sp)
{
XENA_dev_config_t __iomem *bar0 = sp->bar0;
u64 val64;
@@ -2111,7 +2111,7 @@
* SUCCESS on success or an appropriate -ve value on failure.
*/
-int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
+static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
{
struct net_device *dev = nic->dev;
struct sk_buff *skb;
@@ -2796,7 +2796,7 @@
* SUCCESS on success and FAILURE on failure.
*/
-int wait_for_cmd_complete(nic_t * sp)
+static int wait_for_cmd_complete(nic_t * sp)
{
XENA_dev_config_t __iomem *bar0 = sp->bar0;
int ret = FAILURE, cnt = 0;
@@ -3042,7 +3042,7 @@
return SUCCESS;
}
-int wait_for_msix_trans(nic_t *nic, int i)
+static int wait_for_msix_trans(nic_t *nic, int i)
{
XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
u64 val64;
@@ -3081,7 +3081,7 @@
}
}
-void store_xmsi_data(nic_t *nic)
+static void store_xmsi_data(nic_t *nic)
{
XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
u64 val64, addr, data;
@@ -3253,7 +3253,7 @@
* file on failure.
*/
-int s2io_open(struct net_device *dev)
+static int s2io_open(struct net_device *dev)
{
nic_t *sp = dev->priv;
int err = 0;
@@ -3383,7 +3383,7 @@
* file on failure.
*/
-int s2io_close(struct net_device *dev)
+static int s2io_close(struct net_device *dev)
{
nic_t *sp = dev->priv;
int i;
@@ -3432,7 +3432,7 @@
* 0 on success & 1 on failure.
*/
-int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
+static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
{
nic_t *sp = dev->priv;
u16 frg_cnt, frg_len, i, queue, queue_len, put_off, get_off;
@@ -3878,7 +3878,7 @@
* pointer to the updated net_device_stats structure.
*/
-struct net_device_stats *s2io_get_stats(struct net_device *dev)
+static struct net_device_stats *s2io_get_stats(struct net_device *dev)
{
nic_t *sp = dev->priv;
mac_info_t *mac_control;
@@ -5071,19 +5071,20 @@
tmp_stats[i++] = stat_info->sw_stat.double_ecc_errs;
}
-int s2io_ethtool_get_regs_len(struct net_device *dev)
+static int s2io_ethtool_get_regs_len(struct net_device *dev)
{
return (XENA_REG_SPACE);
}
-u32 s2io_ethtool_get_rx_csum(struct net_device * dev)
+static u32 s2io_ethtool_get_rx_csum(struct net_device * dev)
{
nic_t *sp = dev->priv;
return (sp->rx_csum);
}
-int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
+
+static int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
{
nic_t *sp = dev->priv;
@@ -5094,17 +5095,19 @@
return 0;
}
-int s2io_get_eeprom_len(struct net_device *dev)
+
+static int s2io_get_eeprom_len(struct net_device *dev)
{
return (XENA_EEPROM_SPACE);
}
-int s2io_ethtool_self_test_count(struct net_device *dev)
+static int s2io_ethtool_self_test_count(struct net_device *dev)
{
return (S2IO_TEST_LEN);
}
-void s2io_ethtool_get_strings(struct net_device *dev,
- u32 stringset, u8 * data)
+
+static void s2io_ethtool_get_strings(struct net_device *dev,
+ u32 stringset, u8 * data)
{
switch (stringset) {
case ETH_SS_TEST:
@@ -5120,7 +5123,7 @@
return (S2IO_STAT_LEN);
}
-int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
+static int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
{
if (data)
dev->features |= NETIF_F_IP_CSUM;
@@ -5173,7 +5176,7 @@
* function always return EOPNOTSUPPORTED
*/
-int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+static int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
return -EOPNOTSUPP;
}
@@ -5189,7 +5192,7 @@
* file on failure.
*/
-int s2io_change_mtu(struct net_device *dev, int new_mtu)
+static int s2io_change_mtu(struct net_device *dev, int new_mtu)
{
nic_t *sp = dev->priv;
reply other threads:[~2005-11-06 0:46 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20051106004647.GD3668@stusta.de \
--to=bunk@stusta.de \
--cc=jgarzik@pobox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).