From mboxrd@z Thu Jan 1 00:00:00 1970 From: Adrian Bunk Subject: [2.6 patch] wrong firmware location in IPW2100 Kconfig entry Date: Tue, 31 Jan 2006 17:11:24 +0100 Message-ID: <20060131161124.GA3986@stusta.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: netdev@vger.kernel.org, Jesper Juhl , linux-kernel@vger.kernel.org, yi.zhu@intel.com, jketreno@linux.intel.com Return-path: To: linville@tuxdriver.com Content-Disposition: inline Sender: linux-kernel-owner@vger.kernel.org List-Id: netdev.vger.kernel.org From: Jesper Juhl Firmware should go into /lib/firmware, not /etc/firmware. Found by Alejandro Bonilla. Signed-off-by: Jesper Juhl Signed-off-by: Adrian Bunk --- This patch was sent by Jesper Juhl on: - 6 Sep 2005 --- linux-2.6.13-mm1-orig/drivers/net/wireless/Kconfig 2005-09-02 23:59:51.000000000 +0200 +++ linux-2.6.13-mm1/drivers/net/wireless/Kconfig 2005-09-06 20:39:45.000000000 +0200 @@ -152,7 +152,7 @@ In order to use this driver, you will need a firmware image for it. You can obtain the firmware from . Once you have the firmware image, you - will need to place it in /etc/firmware. + will need to place it in /lib/firmware. You will also very likely need the Wireless Tools in order to configure your card: