* [PATCH] bcm43xx: make PIO mode usable
@ 2006-04-23 11:23 Michael Buesch
0 siblings, 0 replies; only message in thread
From: Michael Buesch @ 2006-04-23 11:23 UTC (permalink / raw)
To: John W. Linville; +Cc: Andrew Morton, netdev, bcm43xx-dev
[-- Attachment #1: Type: text/plain, Size: 10100 bytes --]
Please apply this to 2.6.17, because it can be used
as a tempoary workaround for people with the >1G problem.
--
This patch fixes PIO mode on the softmac bcm43xx
driver. (A dscape patch will follow).
It mainly fixes endianess issues.
This patch is tested on PowerPC32 and i386.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Index: wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_dma.h
===================================================================
--- wireless-2.6.orig/drivers/net/wireless/bcm43xx/bcm43xx_dma.h 2006-04-11 06:26:46.000000000 +0200
+++ wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_dma.h 2006-04-22 16:47:51.000000000 +0200
@@ -213,6 +213,14 @@
void bcm43xx_dma_rx(struct bcm43xx_dmaring *ring)
{
}
+static inline
+void bcm43xx_dma_tx_suspend(struct bcm43xx_dmaring *ring)
+{
+}
+static inline
+void bcm43xx_dma_tx_resume(struct bcm43xx_dmaring *ring)
+{
+}
#endif /* CONFIG_BCM43XX_DMA */
#endif /* BCM43xx_DMA_H_ */
Index: wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_pio.c
===================================================================
--- wireless-2.6.orig/drivers/net/wireless/bcm43xx/bcm43xx_pio.c 2006-04-11 06:26:46.000000000 +0200
+++ wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_pio.c 2006-04-23 13:10:02.000000000 +0200
@@ -27,6 +27,7 @@
#include "bcm43xx_pio.h"
#include "bcm43xx_main.h"
#include "bcm43xx_xmit.h"
+#include "bcm43xx_power.h"
#include <linux/delay.h>
@@ -44,10 +45,10 @@
bcm43xx_pio_write(queue, BCM43xx_PIO_TXDATA,
octet);
bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL,
- BCM43xx_PIO_TXCTL_WRITEHI);
+ BCM43xx_PIO_TXCTL_WRITELO);
} else {
bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL,
- BCM43xx_PIO_TXCTL_WRITEHI);
+ BCM43xx_PIO_TXCTL_WRITELO);
bcm43xx_pio_write(queue, BCM43xx_PIO_TXDATA,
octet);
}
@@ -103,7 +104,7 @@
bcm43xx_pio_write(queue, BCM43xx_PIO_TXDATA,
skb->data[skb->len - 1]);
bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL,
- BCM43xx_PIO_TXCTL_WRITEHI |
+ BCM43xx_PIO_TXCTL_WRITELO |
BCM43xx_PIO_TXCTL_COMPLETE);
} else {
bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL,
@@ -112,9 +113,10 @@
}
static u16 generate_cookie(struct bcm43xx_pioqueue *queue,
- int packetindex)
+ struct bcm43xx_pio_txpacket *packet)
{
u16 cookie = 0x0000;
+ int packetindex;
/* We use the upper 4 bits for the PIO
* controller ID and the lower 12 bits
@@ -135,6 +137,7 @@
default:
assert(0);
}
+ packetindex = pio_txpacket_getindex(packet);
assert(((u16)packetindex & 0xF000) == 0x0000);
cookie |= (u16)packetindex;
@@ -184,7 +187,7 @@
bcm43xx_generate_txhdr(queue->bcm,
&txhdr, skb->data, skb->len,
(packet->xmitted_frags == 0),
- generate_cookie(queue, pio_txpacket_getindex(packet)));
+ generate_cookie(queue, packet));
tx_start(queue);
octets = skb->len + sizeof(txhdr);
@@ -241,7 +244,7 @@
queue->tx_devq_packets++;
queue->tx_devq_used += octets;
- assert(packet->xmitted_frags <= packet->txb->nr_frags);
+ assert(packet->xmitted_frags < packet->txb->nr_frags);
packet->xmitted_frags++;
packet->xmitted_octets += octets;
}
@@ -257,8 +260,14 @@
unsigned long flags;
struct bcm43xx_pio_txpacket *packet, *tmp_packet;
int err;
+ u16 txctl;
bcm43xx_lock_mmio(bcm, flags);
+
+ txctl = bcm43xx_pio_read(queue, BCM43xx_PIO_TXCTL);
+ if (txctl & BCM43xx_PIO_TXCTL_SUSPEND)
+ goto out_unlock;
+
list_for_each_entry_safe(packet, tmp_packet, &queue->txqueue, list) {
assert(packet->xmitted_frags < packet->txb->nr_frags);
if (packet->xmitted_frags == 0) {
@@ -288,6 +297,7 @@
next_packet:
continue;
}
+out_unlock:
bcm43xx_unlock_mmio(bcm, flags);
}
@@ -330,12 +340,19 @@
(unsigned long)queue);
value = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD);
- value |= BCM43xx_SBF_XFER_REG_BYTESWAP;
+ value &= ~BCM43xx_SBF_XFER_REG_BYTESWAP;
bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, value);
qsize = bcm43xx_read16(bcm, queue->mmio_base + BCM43xx_PIO_TXQBUFSIZE);
+ if (qsize == 0) {
+ printk(KERN_ERR PFX "ERROR: This card does not support PIO "
+ "operation mode. Please use DMA mode "
+ "(module parameter pio=0).\n");
+ goto err_freequeue;
+ }
if (qsize <= BCM43xx_PIO_TXQADJUST) {
- printk(KERN_ERR PFX "PIO tx device-queue too small (%u)\n", qsize);
+ printk(KERN_ERR PFX "PIO tx device-queue too small (%u)\n",
+ qsize);
goto err_freequeue;
}
qsize -= BCM43xx_PIO_TXQADJUST;
@@ -444,15 +461,10 @@
{
struct bcm43xx_pioqueue *queue = bcm43xx_current_pio(bcm)->queue1;
struct bcm43xx_pio_txpacket *packet;
- u16 tmp;
assert(!queue->tx_suspended);
assert(!list_empty(&queue->txfree));
- tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_TXCTL);
- if (tmp & BCM43xx_PIO_TXCTL_SUSPEND)
- return -EBUSY;
-
packet = list_entry(queue->txfree.next, struct bcm43xx_pio_txpacket, list);
packet->txb = txb;
packet->xmitted_frags = 0;
@@ -462,7 +474,7 @@
assert(queue->nr_txfree < BCM43xx_PIO_MAXTXPACKETS);
/* Suspend TX, if we are out of packets in the "free" queue. */
- if (unlikely(list_empty(&queue->txfree))) {
+ if (list_empty(&queue->txfree)) {
netif_stop_queue(queue->bcm->net_dev);
queue->tx_suspended = 1;
}
@@ -480,15 +492,15 @@
queue = parse_cookie(bcm, status->cookie, &packet);
assert(queue);
-//TODO
-if (!queue)
-return;
+
free_txpacket(packet, 1);
- if (unlikely(queue->tx_suspended)) {
+ if (queue->tx_suspended) {
queue->tx_suspended = 0;
netif_wake_queue(queue->bcm->net_dev);
}
- /* If there are packets on the txqueue, poke the tasklet. */
+ /* If there are packets on the txqueue, poke the tasklet
+ * to transmit them.
+ */
if (!list_empty(&queue->txqueue))
tasklet_schedule(&queue->txtask);
}
@@ -519,12 +531,9 @@
int i, preamble_readwords;
struct sk_buff *skb;
-return;
tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_RXCTL);
- if (!(tmp & BCM43xx_PIO_RXCTL_DATAAVAILABLE)) {
- dprintkl(KERN_ERR PFX "PIO RX: No data available\n");//TODO: remove this printk.
+ if (!(tmp & BCM43xx_PIO_RXCTL_DATAAVAILABLE))
return;
- }
bcm43xx_pio_write(queue, BCM43xx_PIO_RXCTL,
BCM43xx_PIO_RXCTL_DATAAVAILABLE);
@@ -538,8 +547,7 @@
return;
data_ready:
-//FIXME: endianess in this function.
- len = le16_to_cpu(bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA));
+ len = bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA);
if (unlikely(len > 0x700)) {
pio_rx_error(queue, 0, "len > 0x700");
return;
@@ -555,7 +563,7 @@
preamble_readwords = 18 / sizeof(u16);
for (i = 0; i < preamble_readwords; i++) {
tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA);
- preamble[i + 1] = cpu_to_be16(tmp);//FIXME?
+ preamble[i + 1] = cpu_to_le16(tmp);
}
rxhdr = (struct bcm43xx_rxhdr *)preamble;
rxflags2 = le16_to_cpu(rxhdr->flags2);
@@ -591,16 +599,40 @@
}
skb_put(skb, len);
for (i = 0; i < len - 1; i += 2) {
- tmp = cpu_to_be16(bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA));
- *((u16 *)(skb->data + i)) = tmp;
+ tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA);
+ *((u16 *)(skb->data + i)) = cpu_to_le16(tmp);
}
if (len % 2) {
tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA);
skb->data[len - 1] = (tmp & 0x00FF);
+/* The specs say the following is required, but
+ * it is wrong and corrupts the PLCP. If we don't do
+ * this, the PLCP seems to be correct. So ifdef it out for now.
+ */
+#if 0
if (rxflags2 & BCM43xx_RXHDR_FLAGS2_TYPE2FRAME)
- skb->data[0x20] = (tmp & 0xFF00) >> 8;
+ skb->data[2] = (tmp & 0xFF00) >> 8;
else
- skb->data[0x1E] = (tmp & 0xFF00) >> 8;
+ skb->data[0] = (tmp & 0xFF00) >> 8;
+#endif
}
+ skb_trim(skb, len - IEEE80211_FCS_LEN);
bcm43xx_rx(queue->bcm, skb, rxhdr);
}
+
+void bcm43xx_pio_tx_suspend(struct bcm43xx_pioqueue *queue)
+{
+ bcm43xx_power_saving_ctl_bits(queue->bcm, -1, 1);
+ bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL,
+ bcm43xx_pio_read(queue, BCM43xx_PIO_TXCTL)
+ | BCM43xx_PIO_TXCTL_SUSPEND);
+}
+
+void bcm43xx_pio_tx_resume(struct bcm43xx_pioqueue *queue)
+{
+ bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL,
+ bcm43xx_pio_read(queue, BCM43xx_PIO_TXCTL)
+ & ~BCM43xx_PIO_TXCTL_SUSPEND);
+ bcm43xx_power_saving_ctl_bits(queue->bcm, -1, -1);
+ tasklet_schedule(&queue->txtask);
+}
Index: wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_pio.h
===================================================================
--- wireless-2.6.orig/drivers/net/wireless/bcm43xx/bcm43xx_pio.h 2006-04-11 06:26:46.000000000 +0200
+++ wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_pio.h 2006-04-22 16:47:17.000000000 +0200
@@ -14,8 +14,8 @@
#define BCM43xx_PIO_RXCTL 0x08
#define BCM43xx_PIO_RXDATA 0x0A
-#define BCM43xx_PIO_TXCTL_WRITEHI (1 << 0)
-#define BCM43xx_PIO_TXCTL_WRITELO (1 << 1)
+#define BCM43xx_PIO_TXCTL_WRITELO (1 << 0)
+#define BCM43xx_PIO_TXCTL_WRITEHI (1 << 1)
#define BCM43xx_PIO_TXCTL_COMPLETE (1 << 2)
#define BCM43xx_PIO_TXCTL_INIT (1 << 3)
#define BCM43xx_PIO_TXCTL_SUSPEND (1 << 7)
@@ -95,6 +95,7 @@
u16 offset, u16 value)
{
bcm43xx_write16(queue->bcm, queue->mmio_base + offset, value);
+ mmiowb();
}
@@ -107,6 +108,9 @@
struct bcm43xx_xmitstatus *status);
void bcm43xx_pio_rx(struct bcm43xx_pioqueue *queue);
+void bcm43xx_pio_tx_suspend(struct bcm43xx_pioqueue *queue);
+void bcm43xx_pio_tx_resume(struct bcm43xx_pioqueue *queue);
+
#else /* CONFIG_BCM43XX_PIO */
static inline
@@ -133,6 +137,14 @@
void bcm43xx_pio_rx(struct bcm43xx_pioqueue *queue)
{
}
+static inline
+void bcm43xx_pio_tx_suspend(struct bcm43xx_pioqueue *queue)
+{
+}
+static inline
+void bcm43xx_pio_tx_resume(struct bcm43xx_pioqueue *queue)
+{
+}
#endif /* CONFIG_BCM43XX_PIO */
#endif /* BCM43xx_PIO_H_ */
--
Greetings Michael.
[-- Attachment #2: Type: application/pgp-signature, Size: 191 bytes --]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-04-23 11:20 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-04-23 11:23 [PATCH] bcm43xx: make PIO mode usable Michael Buesch
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).