From: Ivo van Doorn <ivdoorn@gmail.com>
To: netdev@vger.kernel.org
Cc: rt2x00-devel@lfcorreia.dyndns.org
Subject: [PATCH 32/32] rt2x00: misc fixes
Date: Fri, 28 Apr 2006 00:03:21 +0200 [thread overview]
Message-ID: <200604280003.22207.IvDoorn@gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 6511 bytes --]
From: Ivo van Doorn <IvDoorn@gmail.com>
Misc. small fixes. Add small comments,
remove unwanted whitespaces etc.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
diff -uprN wireless-dev-rt2x00/drivers/net/wireless/d80211/rt2x00/rt2400pci.c wireless-dev-rt2x00-patch/drivers/net/wireless/d80211/rt2x00/rt2400pci.c
--- wireless-dev-rt2x00/drivers/net/wireless/d80211/rt2x00/rt2400pci.c 2006-04-27 22:05:52.000000000 +0200
+++ wireless-dev-rt2x00-patch/drivers/net/wireless/d80211/rt2x00/rt2400pci.c 2006-04-27 22:06:22.000000000 +0200
@@ -1003,7 +1003,7 @@ rt2400pci_txdone(void *data)
int tx_status;
int ack;
- while (!rt2x00_ring_empty(ring)) {
+ while (!rt2x00_ring_empty(ring)) {
entry = rt2x00_get_data_entry_done(ring);
txd = entry->desc_addr;
@@ -1212,7 +1212,7 @@ rt2400pci_free_ring(struct rt2x00_pci *r
ring->data_addr, ring->data_dma);
ring->data_addr = NULL;
- kfree(ring->entry);
+ kfree(ring->entry);
ring->entry = NULL;
}
@@ -1318,6 +1318,9 @@ rt2400pci_init_rings(struct rt2x00_pci *
{
u32 reg;
+ /*
+ * Initialize rings.
+ */
rt2400pci_init_rxdesc(rt2x00pci, &rt2x00pci->ring[RING_RX]);
rt2400pci_init_txdesc(rt2x00pci, &rt2x00pci->ring[RING_TX]);
rt2400pci_init_txdesc(rt2x00pci, &rt2x00pci->ring[RING_ATIM]);
@@ -1847,7 +1850,7 @@ rt2400pci_config_interface(struct net_de
rt2400pci_config_bssid(rt2x00pci, conf->bssid);
return 0;
- }
+}
static void
rt2400pci_set_multicast_list(struct net_device *net_dev,
diff -uprN wireless-dev-rt2x00/drivers/net/wireless/d80211/rt2x00/rt2500pci.c wireless-dev-rt2x00-patch/drivers/net/wireless/d80211/rt2x00/rt2500pci.c
--- wireless-dev-rt2x00/drivers/net/wireless/d80211/rt2x00/rt2500pci.c 2006-04-27 22:05:52.000000000 +0200
+++ wireless-dev-rt2x00-patch/drivers/net/wireless/d80211/rt2x00/rt2500pci.c 2006-04-27 22:06:22.000000000 +0200
@@ -487,7 +487,7 @@ rt2500pci_config_channel(struct rt2x00_p
if (rt2x00_rf(&rt2x00pci->chip, RF5222)) {
if (channel < 14) {
- rf1 = cpu_to_le32(0x00022020);
+ rf1 = cpu_to_le32(0x00022020);
rf4 = cpu_to_le32(0x00000a0b);
} else if (channel == 14) {
rf1 = cpu_to_le32(0x00022010);
@@ -501,7 +501,7 @@ rt2500pci_config_channel(struct rt2x00_p
} else if (channel < 161) {
rf1 = cpu_to_le32(0x00022020);
rf4 = cpu_to_le32(0x00000a07);
- }
+ }
}
INFO("Switching channel. RF1: 0x%08x, RF2: 0x%08x, RF3: 0x%08x, "
@@ -1091,7 +1091,7 @@ rt2500pci_txdone(void *data)
int tx_status;
int ack;
- while (!rt2x00_ring_empty(ring)) {
+ while (!rt2x00_ring_empty(ring)) {
entry = rt2x00_get_data_entry_done(ring);
txd = entry->desc_addr;
@@ -1301,7 +1301,7 @@ rt2500pci_free_ring(struct rt2x00_pci *r
ring->data_addr, ring->data_dma);
ring->data_addr = NULL;
- kfree(ring->entry);
+ kfree(ring->entry);
ring->entry = NULL;
}
@@ -2438,7 +2438,7 @@ rt2500pci_init_hw_channels(struct rt2x00
for (counter = 0; counter < ARRAY_SIZE(vals); counter++)
channels[counter].val =
cpu_to_le32(vals[counter] | rf2_base);
- }
+ }
if (rt2x00_rf(&rt2x00pci->chip, RF5222)) {
static u32 vals[] = {
0x00018896, 0x0001889a, 0x0001889e, 0x000188a2,
@@ -2453,7 +2453,7 @@ rt2500pci_init_hw_channels(struct rt2x00
for (counter = 0; counter < ARRAY_SIZE(vals); counter++)
(chan++)->val = cpu_to_le32(vals[counter]);
- }
+ }
/*
* Set TX power, each EEPROM TXpower entry
@@ -2472,7 +2472,7 @@ rt2500pci_init_hw_channels(struct rt2x00
rt2x00_get_field16(eeprom, EEPROM_TXPOWER_2);
if (channels[(counter * 2) + 1].power_level > 0x20)
channels[(counter * 2) + 1].power_level = 0x18;
- }
+ }
/*
* Set device specific, but channel independent RF values.
diff -uprN wireless-dev-rt2x00/drivers/net/wireless/d80211/rt2x00/rt2500usb.c wireless-dev-rt2x00-patch/drivers/net/wireless/d80211/rt2x00/rt2500usb.c
--- wireless-dev-rt2x00/drivers/net/wireless/d80211/rt2x00/rt2500usb.c 2006-04-27 22:05:52.000000000 +0200
+++ wireless-dev-rt2x00-patch/drivers/net/wireless/d80211/rt2x00/rt2500usb.c 2006-04-27 22:08:38.000000000 +0200
@@ -335,7 +335,7 @@ rt2500usb_config_channel(struct rt2x00_u
|| rt2x00_rf(&rt2x00usb->chip, RF2524)
|| rt2x00_rf(&rt2x00usb->chip, RF2525))
&& channel == 14)
- rf4 &= ~0x00000018;
+ rf4 &= ~0x00000018;
if (rt2x00_rf(&rt2x00usb->chip, RF2525E)) {
if (channel & 0x01)
@@ -951,7 +951,7 @@ rt2500usb_txdone(void *data)
* Check if we have received an
* ACK response when ACK was requested and status
* was succesfull.
- */
+ */
entry->tx_status.ack = 0;
if (ack && (entry->urb->status == TX_SUCCESS))
entry->tx_status.ack = 1;
@@ -1636,7 +1636,7 @@ rt2500usb_config_interface(struct net_de
return 0;
rt2500usb_config_bssid(rt2x00usb, conf->bssid);
-
+
return 0;
}
@@ -2071,12 +2071,12 @@ rt2500usb_init_hw_channels(struct rt2x00
for (counter = 0; counter < ARRAY_SIZE(vals); counter++)
channels[counter].val = vals[counter];
- }
+ }
/*
* Set TX power, each EEPROM TXpower entry
* contains the TXpower value for 2 channels.
- */
+ */
for (counter = 0; counter < EEPROM_TXPOWER_SIZE; counter++) {
rt2x00_eeprom_read(rt2x00usb,
EEPROM_TXPOWER_START + counter, &eeprom);
@@ -2090,7 +2090,7 @@ rt2500usb_init_hw_channels(struct rt2x00
rt2x00_get_field16(eeprom, EEPROM_TXPOWER_2);
if (channels[(counter * 2) + 1].power_level > 0x20)
channels[(counter * 2) + 1].power_level = 0x18;
- }
+ }
/*
* Set device specific, but channel independent RF values.
@@ -2302,7 +2302,6 @@ rt2500usb_init_hw(struct rt2x00_usb *rt2
hw->modes[0].num_channels = 14;
hw->modes[0].num_rates = 12;
-
/*
* Intitialize 802.11b
* Rates: CCK.
diff -uprN wireless-dev-rt2x00/drivers/net/wireless/d80211/rt2x00/rt2x00.h wireless-dev-rt2x00-patch/drivers/net/wireless/d80211/rt2x00/rt2x00.h
--- wireless-dev-rt2x00/drivers/net/wireless/d80211/rt2x00/rt2x00.h 2006-04-27 21:57:18.000000000 +0200
+++ wireless-dev-rt2x00-patch/drivers/net/wireless/d80211/rt2x00/rt2x00.h 2006-04-27 22:07:42.000000000 +0200
@@ -44,6 +44,9 @@
* and should be switched on using the module parameter.
*/
#ifdef CONFIG_RT2X00_DEBUG
+/*
+ * Module parameter.
+ */
static int rt2x00_debug_level = 0;
#define DEBUG_PRINTK(__message...) \
do { if (rt2x00_debug_level) printk(__message); } while (0)
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
reply other threads:[~2006-04-27 22:02 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200604280003.22207.IvDoorn@gmail.com \
--to=ivdoorn@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=rt2x00-devel@lfcorreia.dyndns.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).