From: Ivo van Doorn <ivdoorn@gmail.com>
To: netdev@vger.kernel.org
Cc: rt2x00-devel@lfcorreia.dyndns.org
Subject: [PATCH 3/6] rt2x00 update: Use static const for the vals arrays
Date: Fri, 28 Apr 2006 16:52:27 +0200 [thread overview]
Message-ID: <200604281652.27841.IvDoorn@gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 5247 bytes --]
From: Ivo van Doorn <IvDoorn@gmail.com>
Make the vals arrays static const.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
diff -uprN wireless-dev-rt2x00/drivers/net/wireless/d80211/rt2x00/rt2400pci.c wireless-dev-rt2x00-patch/drivers/net/wireless/d80211/rt2x00/rt2400pci.c
--- wireless-dev-rt2x00/drivers/net/wireless/d80211/rt2x00/rt2400pci.c 2006-04-28 15:16:23.000000000 +0200
+++ wireless-dev-rt2x00-patch/drivers/net/wireless/d80211/rt2x00/rt2400pci.c 2006-04-28 15:32:12.000000000 +0200
@@ -2229,7 +2229,7 @@ rt2400pci_init_hw_channels(struct rt2x00
{
int counter;
u16 eeprom;
- static u32 vals[] = {
+ static const u32 vals[] = {
0x000c1fda, 0x000c1fee, 0x000c2002, 0x000c2016,
0x000c202a, 0x000c203e, 0x000c2052, 0x000c2066,
0x000c207a, 0x000c208e, 0x000c20a2, 0x000c20b6,
diff -uprN wireless-dev-rt2x00/drivers/net/wireless/d80211/rt2x00/rt2500pci.c wireless-dev-rt2x00-patch/drivers/net/wireless/d80211/rt2x00/rt2500pci.c
--- wireless-dev-rt2x00/drivers/net/wireless/d80211/rt2x00/rt2500pci.c 2006-04-28 15:16:23.000000000 +0200
+++ wireless-dev-rt2x00-patch/drivers/net/wireless/d80211/rt2x00/rt2500pci.c 2006-04-28 15:32:31.000000000 +0200
@@ -2347,7 +2347,7 @@ rt2500pci_init_hw_channels(struct rt2x00
int counter;
u32 rf2_base;
u16 eeprom;
- static struct {
+ static const struct {
unsigned int chip;
u32 val[3];
} rf[] = {
@@ -2404,7 +2404,7 @@ rt2500pci_init_hw_channels(struct rt2x00
rf2_base = 0x00080000;
if (rt2x00_rf(&rt2x00pci->chip, RF2522)) {
- static u32 vals[] = {
+ static const u32 vals[] = {
0x000c1fda, 0x000c1fee, 0x000c2002, 0x000c2016,
0x000c202a, 0x000c203e, 0x000c2052, 0x000c2066,
0x000c207a, 0x000c208e, 0x000c20a2, 0x000c20b6,
@@ -2416,7 +2416,7 @@ rt2500pci_init_hw_channels(struct rt2x00
} else if (rt2x00_rf(&rt2x00pci->chip, RF2523)
|| rt2x00_rf(&rt2x00pci->chip, RF2524)
|| rt2x00_rf(&rt2x00pci->chip, RF2525)) {
- static u32 vals[] = {
+ static const u32 vals[] = {
0x00000c9e, 0x00000ca2, 0x00000ca6, 0x00000caa,
0x00000cae, 0x00000cb2, 0x00000cb6, 0x00000cba,
0x00000cbe, 0x00000d02, 0x00000d06, 0x00000d0a,
@@ -2428,7 +2428,7 @@ rt2500pci_init_hw_channels(struct rt2x00
cpu_to_le32(vals[counter] | rf2_base);
} else if (rt2x00_rf(&rt2x00pci->chip, RF2525E)
|| rt2x00_rf(&rt2x00pci->chip, RF5222)) {
- static u32 vals[] = {
+ static const u32 vals[] = {
0x00001136, 0x0000113a, 0x0000113e, 0x00001182,
0x00001186, 0x0000118a, 0x0000118e, 0x00001192,
0x00001196, 0x0000119a, 0x0000119e, 0x000011a2,
@@ -2440,7 +2440,7 @@ rt2500pci_init_hw_channels(struct rt2x00
cpu_to_le32(vals[counter] | rf2_base);
}
if (rt2x00_rf(&rt2x00pci->chip, RF5222)) {
- static u32 vals[] = {
+ static const u32 vals[] = {
0x00018896, 0x0001889a, 0x0001889e, 0x000188a2,
0x000188a6, 0x000188aa, 0x000188ae, 0x000188b2,
0x00008802, 0x00008806, 0x0000880a, 0x0000880e,
diff -uprN wireless-dev-rt2x00/drivers/net/wireless/d80211/rt2x00/rt2500usb.c wireless-dev-rt2x00-patch/drivers/net/wireless/d80211/rt2x00/rt2500usb.c
--- wireless-dev-rt2x00/drivers/net/wireless/d80211/rt2x00/rt2500usb.c 2006-04-28 15:16:22.000000000 +0200
+++ wireless-dev-rt2x00-patch/drivers/net/wireless/d80211/rt2x00/rt2500usb.c 2006-04-28 15:32:06.000000000 +0200
@@ -1968,7 +1968,7 @@ rt2500usb_init_hw_channels(struct rt2x00
int counter;
u32 rf2_base;
u16 eeprom;
- static struct {
+ static const struct {
unsigned int chip;
u32 val[3];
} rf[] = {
@@ -2024,7 +2024,7 @@ rt2500usb_init_hw_channels(struct rt2x00
rf2_base = 0x00080000;
if (rt2x00_rf(&rt2x00usb->chip, RF2522)) {
- static u32 vals[] = {
+ static const u32 vals[] = {
0x000c1fda, 0x000c1fee, 0x000c2002, 0x000c2016,
0x000c202a, 0x000c203e, 0x000c2052, 0x000c2066,
0x000c207a, 0x000c208e, 0x000c20a2, 0x000c20b6,
@@ -2036,7 +2036,7 @@ rt2500usb_init_hw_channels(struct rt2x00
} else if (rt2x00_rf(&rt2x00usb->chip, RF2523)
|| rt2x00_rf(&rt2x00usb->chip, RF2524)
|| rt2x00_rf(&rt2x00usb->chip, RF2525)) {
- static u32 vals[] = {
+ static const u32 vals[] = {
0x00000c9e, 0x00000ca2, 0x00000ca6, 0x00000caa,
0x00000cae, 0x00000cb2, 0x00000cb6, 0x00000cba,
0x00000cbe, 0x00000d02, 0x00000d06, 0x00000d0a,
@@ -2046,7 +2046,7 @@ rt2500usb_init_hw_channels(struct rt2x00
for (counter = 0; counter < ARRAY_SIZE(vals); counter++)
channels[counter].val = vals[counter] | rf2_base;
} else if (rt2x00_rf(&rt2x00usb->chip, RF2525E)) {
- static u32 vals[] = {
+ static const u32 vals[] = {
0x0000089a, 0x0000089e, 0x0000089e, 0x000008a2,
0x000008a2, 0x000008a6, 0x000008a6, 0x000008aa,
0x000008aa, 0x000008ae, 0x000008ae, 0x000008b2,
@@ -2056,7 +2056,7 @@ rt2500usb_init_hw_channels(struct rt2x00
for (counter = 0; counter < ARRAY_SIZE(vals); counter++)
channels[counter].val = vals[counter];
} else if (rt2x00_rf(&rt2x00usb->chip, RF5222)) {
- static u32 vals[] = {
+ static const u32 vals[] = {
0x00001136, 0x0000113a, 0x0000113e, 0x00001182,
0x00001186, 0x0000118a, 0x0000118e, 0x00001192,
0x00001196, 0x0000119a, 0x0000119e, 0x000011a2,
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
reply other threads:[~2006-04-28 14:51 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200604281652.27841.IvDoorn@gmail.com \
--to=ivdoorn@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=rt2x00-devel@lfcorreia.dyndns.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).