From: "John W. Linville" <linville@tuxdriver.com>
To: netdev@vger.kernel.org
Subject: wireless-dev updated
Date: Fri, 19 May 2006 15:15:54 -0400 [thread overview]
Message-ID: <20060519191549.GF30177@tuxdriver.com> (raw)
I have updated the wireless-dev tree w/ some patches posted over the
last couple of weeks. Please update your repositories!
John
---
The following changes since commit b3783fbd3cc23106a21995b1bebde396047b2759:
John W. Linville:
Merge branch 'from-linus'
are found in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-dev.git
Jiri Benc:
d80211: switching management interface on/off
d80211: use alloc_netdev
d80211: fix is_ieee80211_device
John W. Linville:
bcm43xx-d80211: remove out-dated docs and script
Michael Buesch:
bcm43xx-d80211: rewrite interface handling
bcm43xx-d80211: measure the channel change time
bcm43xx-d80211: Fix access to non-existent PHY registers
Stefano Brivio:
bcm43xx-d80211: check for valid MAC address in SPROM
bcm43xx-d80211: add PCI ID for bcm4319
Documentation/networking/bcm43xx-d80211-HOWTO.txt | 67 -----
Documentation/networking/bcm43xx-d80211.txt | 31 ---
drivers/net/wireless/d80211/bcm43xx/bcm43xx.h | 42 +++
drivers/net/wireless/d80211/bcm43xx/bcm43xx_leds.c | 2
drivers/net/wireless/d80211/bcm43xx/bcm43xx_main.c | 245 +++++++++++++-------
drivers/net/wireless/d80211/bcm43xx/bcm43xx_phy.c | 6
net/d80211/hostapd_ioctl.h | 1
net/d80211/ieee80211.c | 149 ++++++------
net/d80211/ieee80211_i.h | 9 -
net/d80211/ieee80211_iface.c | 82 +++++--
net/d80211/ieee80211_ioctl.c | 16 +
scripts/bcm43xx-d80211-sta_up.sh | 80 -------
12 files changed, 355 insertions(+), 375 deletions(-)
delete mode 100644 Documentation/networking/bcm43xx-d80211-HOWTO.txt
delete mode 100644 Documentation/networking/bcm43xx-d80211.txt
delete mode 100755 scripts/bcm43xx-d80211-sta_up.sh
diff --git a/Documentation/networking/bcm43xx-d80211-HOWTO.txt b/Documentation/networking/bcm43xx-d80211-HOWTO.txt
deleted file mode 100644
index 90e4ddf..0000000
--- a/Documentation/networking/bcm43xx-d80211-HOWTO.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-**** ****
-**** HOWTO get bcm43xx-dscape running ****
-**** ****
-
-This is a port of the bcm43xx driver for the devicescape ieee802.11
-stack. The devicescape ieee802.11 stack is an advanced out-of-mainline
-802.11 protocol module.
-I will call the "devicescape ieee802.11 stack" simply "dscape" in the
-following text.
-
-
-*** Setting up the bcm43xx driver with dscape is currently non-trivial,
-*** as several modifications to the kernel and the userland
-*** wpa_supplicant tool are required. We are working on it...
-
-
-1) You need to patch the kernel with the ieee80211-devicescape stack
- and the bcm43xx-dscape port.
- Both are available in one cummulative at:
- ftp://ftp.bu3sch.de/bcm43xx-snapshots/all-in-one/bcm43xx-dscape/
- Read the instructions on http://bcm43xx.berlios.de/ for how to apply
- this patch.
-
- Patch the kernel, compile and install it.
- When configuring, enable
- "Networking/Generic IEEE 802.11 Networking Stack (dscape)"
- and
- "Device Drivers/Network device support/Wireless LAN (non-hamradio)/Broadcom BCM43xx wireless support (DeviceScape stack)"
- Reboot.
-
-2) Set up a wpa_supplicant config file in /etc/wpa_supplicant.conf
- Here is an example for an AES WPA encrypted network:
-
- # WPA AES encryption
- ctrl_interface=/var/run/wpa_supplicant
- network={
- ssid="ACCESSPOINT_SSID"
- key_mgmt=WPA-PSK
- proto=WPA
- pairwise=CCMP TKIP
- group=CCMP TKIP
- psk="MY PASSPHRASE"
- priority=3
- }
-
-3) Take a bottle of your favourite beer, open it and take a swallow.
-
-4) Now it's time to bring the driver up.
- Do modprobe bcm43xx-d80211 to load the driver.
- There is an ugly bash script to bring the driver up after insmod.
- It is found in the "scripts" subdirectory of the patched kernel
- tree and is called "bcm43xx-d80211-sta_up.sh".
- Call scripts/bcm43xx-d80211-sta_up.sh --help to get some usage information.
- It may suffice to call scripts/bcm43xx-d80211-sta_up.sh without any parameters. See
- the help. Default parameters, which are used when called without parameters,
- are explained there.
-
-5) If you want to access the internet, make sure your default route
- is correctly set up with your gateway's IP:
- route add default gw 192.168.xxx.xxx
-
-6) Take another swallow from your bottle of beer and test if it works:
- ping www.kernel.org
-
-7) If it works, drink the rest of your beer. Otherwise read this HOWTO again,
- and again and again. Complain to bcm43xx-dev@lists.berlios.de, if it still
- does not work.
diff --git a/Documentation/networking/bcm43xx-d80211.txt b/Documentation/networking/bcm43xx-d80211.txt
deleted file mode 100644
index 89b101d..0000000
--- a/Documentation/networking/bcm43xx-d80211.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-
- BCM43xx Linux Driver Project
- ============================
-
-About this software
--------------------
-
-The goal of this project is to develop a linux driver for Broadcom
-BCM43xx chips, based on the specification at
-http://bcm-specs.sipsolutions.net/
-
-The project page is http://bcm43xx.berlios.de/
-
-This is a port of the bcm43xx driver for the devicescape ieee802.11
-stack.
-
-Requirements
-------------
-
-1) Linux Kernel 2.6.16 or later
- http://www.kernel.org/
-
- See Documentation/networking/bcm43xx-d80211-HOWTO.txt for further
- instructions.
-
-2) Firmware Files
-
- Please try bcm43xx-fwcutter. It can extract the firmware from various
- binary driver files and supports driver files from Windows, MacOS and
- Linux. You can get bcm43xx-fwcutter from http://bcm43xx.berlios.de/.
- Also, bcm43xx-fwcutter comes with a README file for further instructions.
diff --git a/drivers/net/wireless/d80211/bcm43xx/bcm43xx.h b/drivers/net/wireless/d80211/bcm43xx/bcm43xx.h
index 97bde56..a4a97c2 100644
--- a/drivers/net/wireless/d80211/bcm43xx/bcm43xx.h
+++ b/drivers/net/wireless/d80211/bcm43xx/bcm43xx.h
@@ -626,10 +626,32 @@ struct bcm43xx_key {
u8 algorithm;
};
+struct bcm43xx_interface {
+ /* Opaque ID of the operating interface (!= monitor
+ * interface) from the ieee80211 subsystem.
+ * Do not modify.
+ */
+ int if_id;
+ /* MAC address. */
+ u8 *mac_addr;
+ /* Current BSSID (if any). */
+ u8 *bssid;
+
+ /* Interface type. (IEEE80211_IF_TYPE_XXX) */
+ int type;
+ /* Counter of active monitor interfaces. */
+ int monitor;
+ /* Is the card operating in AP, STA or IBSS mode? */
+ unsigned int operating:1;
+ /* Promisc mode active?
+ * Note that (monitor != 0) implies promisc.
+ */
+ unsigned int promisc:1;
+};
+
struct bcm43xx_private {
struct ieee80211_hw *ieee;
struct ieee80211_low_level_stats ieee_stats;
- int iw_mode;
struct net_device *net_dev;
struct pci_dev *pci_dev;
@@ -653,6 +675,13 @@ struct bcm43xx_private {
short_slot:1, /* TRUE, if short slot timing is enabled. */
firmware_norelease:1; /* Do not release the firmware. Used on suspend. */
+ /* One physical device can have one operating interface
+ * and a virtually infinite amount of monitoring interfaces.
+ * This keeps track of the interfaces and the corresponding
+ * hardware modes.
+ */
+ struct bcm43xx_interface interface;
+ /* Various statistics about the physical device. */
struct bcm43xx_stats stats;
/* Bus type we are connected to.
@@ -716,8 +745,6 @@ #endif
/* Informational stuff. */
char nick[IW_ESSID_MAX_SIZE + 1];
- u8 bssid[ETH_ALEN];
- int interfaces;
/* encryption/decryption */
u16 security_offset;
@@ -854,6 +881,15 @@ struct bcm43xx_private * dev_to_bcm(stru
return bcm;
}
+/* Is the device operating in a specified mode (IEEE80211_IF_TYPE_XXX). */
+static inline
+int bcm43xx_is_mode(struct bcm43xx_private *bcm, int type)
+{
+ if (type == IEEE80211_IF_TYPE_MNTR)
+ return !!bcm->interface.monitor;
+ return (bcm->interface.operating &&
+ bcm->interface.type == type);
+}
static inline
u16 bcm43xx_read16(struct bcm43xx_private *bcm, u16 offset)
diff --git a/drivers/net/wireless/d80211/bcm43xx/bcm43xx_leds.c b/drivers/net/wireless/d80211/bcm43xx/bcm43xx_leds.c
index 02bb08d..439bae4 100644
--- a/drivers/net/wireless/d80211/bcm43xx/bcm43xx_leds.c
+++ b/drivers/net/wireless/d80211/bcm43xx/bcm43xx_leds.c
@@ -217,7 +217,7 @@ void bcm43xx_leds_update(struct bcm43xx_
bcm43xx_led_blink_stop(led, 0);
continue;
case BCM43xx_LED_APTRANSFER:
- if (bcm->iw_mode == IW_MODE_MASTER) {
+ if (bcm43xx_is_mode(bcm, IEEE80211_IF_TYPE_AP)) {
if (transferring) {
interval = BCM43xx_LEDBLINK_FAST;
turn_on = 1;
diff --git a/drivers/net/wireless/d80211/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/d80211/bcm43xx/bcm43xx_main.c
index 93fc6f4..88f7dfe 100644
--- a/drivers/net/wireless/d80211/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/d80211/bcm43xx/bcm43xx_main.c
@@ -128,6 +128,8 @@ static struct pci_device_id bcm43xx_pci_
{ PCI_VENDOR_ID_BROADCOM, 0x4307, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
/* Broadcom 4318 802.11b/g */
{ PCI_VENDOR_ID_BROADCOM, 0x4318, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ /* Broadcom 4319 802.11b/g */
+ { PCI_VENDOR_ID_BROADCOM, 0x4319, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
/* Broadcom 4306 802.11b/g */
{ PCI_VENDOR_ID_BROADCOM, 0x4320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
/* Broadcom 4306 802.11a */
@@ -354,6 +356,33 @@ void bcm43xx_tsf_write(struct bcm43xx_pr
bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, status);
}
+static void bcm43xx_measure_channel_change_time(struct bcm43xx_private *bcm)
+{
+ struct bcm43xx_radioinfo *radio;
+ u64 start, stop;
+ unsigned long flags;
+ u8 oldchan, testchan;
+
+ /* We (ab)use the bcm43xx TSF timer to measure the time needed
+ * to switch channels. This information is handed over to
+ * the ieee80211 subsystem.
+ * Time is measured in microseconds.
+ */
+
+ bcm43xx_lock_mmio(bcm, flags);
+ radio = bcm43xx_current_radio(bcm);
+ oldchan = radio->channel;
+ testchan = (oldchan == 6) ? 7 : 6;
+ bcm43xx_tsf_read(bcm, &start);
+ bcm43xx_radio_selectchannel(bcm, testchan, 0);
+ bcm43xx_tsf_read(bcm, &stop);
+ bcm43xx_radio_selectchannel(bcm, oldchan, 0);
+ bcm43xx_unlock_mmio(bcm, flags);
+
+ assert(stop > start);
+ bcm->ieee->channel_change_time = stop - start;
+}
+
static
void bcm43xx_macfilter_set(struct bcm43xx_private *bcm,
u16 offset,
@@ -378,18 +407,26 @@ void bcm43xx_macfilter_set(struct bcm43x
static void bcm43xx_macfilter_clear(struct bcm43xx_private *bcm,
u16 offset)
{
- const u8 zero_addr[ETH_ALEN] = { 0 };
+ static const u8 zero_addr[ETH_ALEN] = { 0 };
bcm43xx_macfilter_set(bcm, offset, zero_addr);
}
static void bcm43xx_write_mac_bssid_templates(struct bcm43xx_private *bcm)
{
- const u8 *mac = (const u8 *)(bcm->net_dev->dev_addr);
- const u8 *bssid = bcm->bssid;
+ static const u8 zero_addr[ETH_ALEN] = { 0 };
+ const u8 *mac = NULL;
+ const u8 *bssid = NULL;
u8 mac_bssid[ETH_ALEN * 2];
int i;
+ bssid = bcm->interface.bssid;
+ if (!bssid)
+ bssid = zero_addr;
+ mac = bcm->interface.mac_addr;
+ if (!mac)
+ mac = zero_addr;
+
memcpy(mac_bssid, mac, ETH_ALEN);
memcpy(mac_bssid + ETH_ALEN, bssid, ETH_ALEN);
@@ -1438,15 +1475,15 @@ generate_new:
static void handle_irq_ps(struct bcm43xx_private *bcm)
{
- if (bcm->iw_mode == IW_MODE_MASTER) {
+ if (bcm43xx_is_mode(bcm, IEEE80211_IF_TYPE_AP)) {
///TODO: PS TBTT
} else {
if (1/*FIXME: the last PSpoll frame was sent successfully */)
bcm43xx_power_saving_ctl_bits(bcm, -1, -1);
}
- if (bcm->iw_mode == IW_MODE_ADHOC)
+ bcm->reg124_set_0x4 = 0;
+ if (bcm43xx_is_mode(bcm, IEEE80211_IF_TYPE_IBSS))
bcm->reg124_set_0x4 = 1;
- //FIXME else set to false?
}
static void handle_irq_reg124(struct bcm43xx_private *bcm)
@@ -1456,7 +1493,6 @@ static void handle_irq_reg124(struct bcm
bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS2_BITFIELD,
bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS2_BITFIELD)
| 0x4);
- //FIXME: reset reg124_set_0x4 to false?
}
static void handle_irq_pmq(struct bcm43xx_private *bcm)
@@ -1509,7 +1545,9 @@ static void handle_irq_beacon(struct bcm
* Request the 80211 subsystem to generate a new beacon
* frame and use it as template.
*/
- bcm->cached_beacon = ieee80211_beacon_get(bcm->net_dev, 0, &control);
+ bcm->cached_beacon = ieee80211_beacon_get(bcm->net_dev,
+ bcm->interface.if_id,
+ &control);
if (unlikely(!bcm->cached_beacon)) {
dprintkl(KERN_WARNING PFX "Could not generate beacon template.\n");
goto ack;
@@ -1603,7 +1641,7 @@ #endif /* CONFIG_BCM43XX_D80211_DEBUG*/
}
if (reason & BCM43xx_IRQ_BEACON) {
- if (bcm->iw_mode == IW_MODE_MASTER)
+ if (bcm43xx_is_mode(bcm, IEEE80211_IF_TYPE_AP))
handle_irq_beacon(bcm);
bcmirq_handled(BCM43xx_IRQ_BEACON);
}
@@ -2147,55 +2185,49 @@ void bcm43xx_mac_suspend(struct bcm43xx_
printkl(KERN_ERR PFX "MAC suspend failed\n");
}
-void bcm43xx_set_iwmode(struct bcm43xx_private *bcm,
- int iw_mode)
+static void bcm43xx_select_opmode(struct bcm43xx_private *bcm)
{
- struct net_device *net_dev = bcm->net_dev;
u32 status;
u16 value;
- bcm->iw_mode = iw_mode;
- if (iw_mode == IW_MODE_MONITOR)
- net_dev->type = ARPHRD_IEEE80211;
- else
- net_dev->type = ARPHRD_ETHER;
-
status = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD);
- /* Reset status to infrastructured mode */
- status &= ~(BCM43xx_SBF_MODE_AP | BCM43xx_SBF_MODE_MONITOR);
+ /* Reset status to default STA mode */
+ status &= ~BCM43xx_SBF_MODE_AP;
+ status &= ~BCM43xx_SBF_MODE_MONITOR;
status &= ~BCM43xx_SBF_MODE_PROMISC;
status |= BCM43xx_SBF_MODE_NOTADHOC;
-/* FIXME: Always enable promisc mode, until we get the MAC filters working correctly. */
-status |= BCM43xx_SBF_MODE_PROMISC;
-
- switch (iw_mode) {
- case IW_MODE_MONITOR:
+ if (bcm->interface.operating) {
+ switch (bcm->interface.type) {
+ case IEEE80211_IF_TYPE_AP:
+ status |= BCM43xx_SBF_MODE_AP;
+ break;
+ case IEEE80211_IF_TYPE_IBSS:
+ status &= ~BCM43xx_SBF_MODE_NOTADHOC;
+ break;
+ case IEEE80211_IF_TYPE_STA:
+ case IEEE80211_IF_TYPE_MNTR:
+ case IEEE80211_IF_TYPE_WDS:
+ break;
+ default:
+ assert(0);
+ }
+ }
+ if (bcm->interface.monitor) {
status |= BCM43xx_SBF_MODE_MONITOR;
status |= BCM43xx_SBF_MODE_PROMISC;
- break;
- case IW_MODE_ADHOC:
- status &= ~BCM43xx_SBF_MODE_NOTADHOC;
- break;
- case IW_MODE_MASTER:
- status |= BCM43xx_SBF_MODE_AP;
- break;
- case IW_MODE_SECOND:
- case IW_MODE_REPEAT:
- TODO(); /* TODO */
- break;
- case IW_MODE_INFRA:
- /* nothing to be done here... */
- break;
- default:
- dprintk(KERN_ERR PFX "Unknown mode in set_iwmode: %d\n", iw_mode);
}
- if (net_dev->flags & IFF_PROMISC)
+ if (bcm->interface.promisc)
status |= BCM43xx_SBF_MODE_PROMISC;
+
+/* FIXME: Always enable promisc mode, until we get the MAC filters working correctly. */
+status |= BCM43xx_SBF_MODE_PROMISC;
+
bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, status);
value = 0x0002;
- if (iw_mode != IW_MODE_ADHOC && iw_mode != IW_MODE_MASTER) {
+ if ((status & BCM43xx_SBF_MODE_NOTADHOC) &&
+ !(status & BCM43xx_SBF_MODE_AP)) {
if (bcm->chip_id == 0x4306 && bcm->chip_rev == 3)
value = 0x0064;
else
@@ -2291,7 +2323,7 @@ static int bcm43xx_chip_init(struct bcm4
bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0074, 0x0000);
/* Initially set the wireless operation mode. */
- bcm43xx_set_iwmode(bcm, bcm->iw_mode);
+ bcm43xx_select_opmode(bcm);
if (bcm->current_core->rev < 3) {
bcm43xx_write16(bcm, 0x060E, 0x0000);
@@ -2599,27 +2631,6 @@ out:
return err;
}
-static void bcm43xx_gen_bssid(struct bcm43xx_private *bcm)
-{
- const u8 *mac = (const u8*)(bcm->net_dev->dev_addr);
- u8 *bssid = bcm->bssid;
-
- switch (bcm->iw_mode) {
- case IW_MODE_ADHOC:
- random_ether_addr(bssid);
- break;
- case IW_MODE_MASTER:
- case IW_MODE_INFRA:
- case IW_MODE_REPEAT:
- case IW_MODE_SECOND:
- case IW_MODE_MONITOR:
- memcpy(bssid, mac, ETH_ALEN);
- break;
- default:
- assert(0);
- }
-}
-
static void bcm43xx_rate_memory_write(struct bcm43xx_private *bcm,
u16 rate,
int is_ofdm)
@@ -2746,7 +2757,6 @@ static int bcm43xx_wireless_core_init(st
/* Maximum Contention Window */
bcm43xx_shm_write32(bcm, BCM43xx_SHM_WIRELESS, 0x0004, 0x000003ff);
- bcm43xx_gen_bssid(bcm);
bcm43xx_write_mac_bssid_templates(bcm);
if (bcm->current_core->rev >= 5)
@@ -3725,6 +3735,7 @@ static int bcm43xx_init_board(struct bcm
dprintk(KERN_INFO PFX "80211 cores initialized\n");
bcm43xx_setup_modes(bcm);
bcm43xx_security_init(bcm);
+ bcm43xx_measure_channel_change_time(bcm);
ieee80211_update_hw(bcm->net_dev, bcm->ieee);
ieee80211_netif_oper(bcm->net_dev, NETIF_ATTACH);
ieee80211_netif_oper(bcm->net_dev, NETIF_START);
@@ -3934,7 +3945,7 @@ static int bcm43xx_attach_board(struct b
bcm43xx_pctl_set_crystal(bcm, 0);
/* Set the MAC address in the networking subsystem */
- if (bcm43xx_current_phy(bcm)->type == BCM43xx_PHYTYPE_A)
+ if (is_valid_ether_addr(bcm->sprom.et1macaddr))
memcpy(bcm->net_dev->dev_addr, bcm->sprom.et1macaddr, 6);
else
memcpy(bcm->net_dev->dev_addr, bcm->sprom.il0macaddr, 6);
@@ -4169,13 +4180,8 @@ #endif /* CONFIG_NET_POLL_CONTROLLER */
static int bcm43xx_net_open(struct net_device *net_dev)
{
struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
- int res;
- res = bcm43xx_init_board(bcm);
- if (!res)
- return res;
- bcm43xx_set_iwmode(bcm, bcm->iw_mode);
- return 0;
+ return bcm43xx_init_board(bcm);
}
static int bcm43xx_net_stop(struct net_device *net_dev)
@@ -4194,33 +4200,91 @@ static int bcm43xx_add_interface(struct
struct ieee80211_if_init_conf *conf)
{
struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ unsigned long flags;
+ int err = -EOPNOTSUPP;
+
+ bcm43xx_lock_mmio(bcm, flags);
- if (bcm->interfaces > 0)
- return -ENOBUFS;
if (conf->type == IEEE80211_IF_TYPE_MNTR) {
- bcm->iw_mode = IW_MODE_MONITOR;
+ bcm->interface.monitor++;
} else {
- if (memcmp(bcm->net_dev->dev_addr, conf->mac_addr, ETH_ALEN) != 0)
- return -EADDRNOTAVAIL;
- if (conf->type == IEEE80211_IF_TYPE_STA)
- bcm->iw_mode = IW_MODE_INFRA;
- else if (conf->type == IEEE80211_IF_TYPE_IBSS)
- bcm->iw_mode = IW_MODE_ADHOC;
- else if (conf->type == IEEE80211_IF_TYPE_AP)
- bcm->iw_mode = IW_MODE_MASTER;
- else
- return -EOPNOTSUPP;
+ if (bcm->interface.operating)
+ goto out_unlock;
+ bcm->interface.operating = 1;
+ bcm->interface.if_id = conf->if_id;
+ bcm->interface.mac_addr = conf->mac_addr;
+ bcm->interface.type = conf->type;
}
- bcm->interfaces++;
- return 0;
+ if (bcm->initialized)
+ bcm43xx_select_opmode(bcm);
+ err = 0;
+
+ dprintk(KERN_INFO PFX "Virtual interface added "
+ "(type: 0x%08X, ID: %d, MAC: "
+ BCM43xx_MACFMT ")\n",
+ conf->type, conf->if_id,
+ BCM43xx_MACARG(conf->mac_addr));
+
+out_unlock:
+ bcm43xx_unlock_mmio(bcm, flags);
+
+ return err;
}
static void bcm43xx_remove_interface(struct net_device *net_dev,
struct ieee80211_if_init_conf *conf)
{
struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ unsigned long flags;
- bcm->interfaces--;
+ bcm43xx_lock_mmio(bcm, flags);
+ if (conf->type == IEEE80211_IF_TYPE_MNTR) {
+ bcm->interface.monitor--;
+ assert(bcm->interface.monitor >= 0);
+ } else
+ bcm->interface.operating = 0;
+ if (bcm->initialized)
+ bcm43xx_select_opmode(bcm);
+ bcm43xx_unlock_mmio(bcm, flags);
+
+ dprintk(KERN_INFO PFX "Virtual interface removed "
+ "(type: 0x%08X, ID: %d, MAC: "
+ BCM43xx_MACFMT ")\n",
+ conf->type, conf->if_id,
+ BCM43xx_MACARG(conf->mac_addr));
+}
+
+static int bcm43xx_config_interface(struct net_device *net_dev,
+ int if_id,
+ struct ieee80211_if_conf *conf)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ unsigned long flags;
+
+ bcm43xx_lock(bcm, flags);
+ if (conf->type != IEEE80211_IF_TYPE_MNTR) {
+ assert(bcm->interface.if_id == if_id);
+ bcm->interface.bssid = conf->bssid;
+ }
+ bcm43xx_unlock(bcm, flags);
+
+ return 0;
+}
+
+static void bcm43xx_set_multicast_list(struct net_device *net_dev,
+ unsigned short netflags,
+ int mc_count)
+{
+ struct bcm43xx_private *bcm = bcm43xx_priv(net_dev);
+ unsigned long flags;
+
+ bcm43xx_lock_mmio(bcm, flags);
+ if (bcm->interface.promisc != !!(netflags & IFF_PROMISC)) {
+ bcm->interface.promisc = !!(netflags & IFF_PROMISC);
+ if (bcm->initialized)
+ bcm43xx_select_opmode(bcm);
+ }
+ bcm43xx_unlock_mmio(bcm, flags);
}
/* Initialization of struct net_device, just after allocation. */
@@ -4294,6 +4358,7 @@ #endif
ieee->name = KBUILD_MODNAME;
ieee->host_gen_beacon = 1;
ieee->rx_includes_fcs = 1;
+ ieee->monitor_during_oper = 1;
ieee->tx = bcm43xx_net_hard_start_xmit;
ieee->open = bcm43xx_net_open;
ieee->stop = bcm43xx_net_stop;
@@ -4301,6 +4366,8 @@ #endif
ieee->remove_interface = bcm43xx_remove_interface;
ieee->reset = bcm43xx_net_reset;
ieee->config = bcm43xx_net_config;
+ ieee->config_interface = bcm43xx_config_interface;
+ ieee->set_multicast_list = bcm43xx_set_multicast_list;
//TODO ieee->set_key = bcm43xx_net_set_key;
ieee->get_stats = bcm43xx_net_get_stats;
ieee->queues = 1;
diff --git a/drivers/net/wireless/d80211/bcm43xx/bcm43xx_phy.c b/drivers/net/wireless/d80211/bcm43xx/bcm43xx_phy.c
index 45da79d..413b2ed 100644
--- a/drivers/net/wireless/d80211/bcm43xx/bcm43xx_phy.c
+++ b/drivers/net/wireless/d80211/bcm43xx/bcm43xx_phy.c
@@ -94,7 +94,7 @@ void bcm43xx_raw_phy_lock(struct bcm43xx
bcm43xx_mac_suspend(bcm);
spin_lock(&phy->lock);
} else {
- if (bcm->iw_mode != IW_MODE_MASTER)
+ if (!bcm43xx_is_mode(bcm, IEEE80211_IF_TYPE_AP))
bcm43xx_power_saving_ctl_bits(bcm, -1, 1);
}
phy->is_locked = 1;
@@ -111,7 +111,7 @@ void bcm43xx_raw_phy_unlock(struct bcm43
bcm43xx_mac_enable(bcm);
}
} else {
- if (bcm->iw_mode != IW_MODE_MASTER)
+ if (!bcm43xx_is_mode(bcm, IEEE80211_IF_TYPE_AP))
bcm43xx_power_saving_ctl_bits(bcm, -1, -1);
}
phy->is_locked = 0;
@@ -1287,7 +1287,7 @@ static void bcm43xx_phy_initg(struct bcm
if (radio->revision == 8)
bcm43xx_phy_write(bcm, 0x0805, 0x3230);
bcm43xx_phy_init_pctl(bcm);
- if (bcm->chip_id == 0x4306 && bcm->chip_package != 2) {
+ if (bcm->chip_id == 0x4306 && bcm->chip_package == 2) {
bcm43xx_phy_write(bcm, 0x0429,
bcm43xx_phy_read(bcm, 0x0429) & 0xBFFF);
bcm43xx_phy_write(bcm, 0x04C3,
diff --git a/net/d80211/hostapd_ioctl.h b/net/d80211/hostapd_ioctl.h
index a462688..3adfa9a 100644
--- a/net/d80211/hostapd_ioctl.h
+++ b/net/d80211/hostapd_ioctl.h
@@ -91,6 +91,7 @@ enum {
PRISM2_PARAM_KEY_MGMT = 1040,
PRISM2_PARAM_RADAR_DETECT = 1043,
PRISM2_PARAM_SPECTRUM_MGMT = 1044,
+ PRISM2_PARAM_MGMT_IF = 1045,
/* NOTE: Please try to coordinate with other active development
* branches before allocating new param numbers so that each new param
* will be unique within all branches and the allocated number will not
diff --git a/net/d80211/ieee80211.c b/net/d80211/ieee80211.c
index ffb7985..0614fa2 100644
--- a/net/d80211/ieee80211.c
+++ b/net/d80211/ieee80211.c
@@ -59,6 +59,8 @@ static int rate_control_initialize(struc
static u8 * ieee80211_get_bssid(struct ieee80211_hdr *hdr, size_t len);
+static int ieee80211_mgmt_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
struct ieee80211_key_conf *
ieee80211_key_data2conf(struct ieee80211_local *local,
@@ -1097,7 +1099,8 @@ __ieee80211_tx_prepare(struct ieee80211_
static int inline is_ieee80211_device(struct net_device *dev)
{
return (dev->wireless_handlers ==
- (struct iw_handler_def *) &ieee80211_iw_handler_def);
+ (struct iw_handler_def *) &ieee80211_iw_handler_def) ||
+ (dev->hard_start_xmit == ieee80211_mgmt_start_xmit);
}
/* Device in tx->dev has a reference added; use dev_put(tx->dev) when
@@ -1954,8 +1957,6 @@ static inline int identical_mac_addr_all
{
return (type1 == IEEE80211_IF_TYPE_MNTR ||
type2 == IEEE80211_IF_TYPE_MNTR ||
- type1 == IEEE80211_IF_TYPE_MGMT ||
- type2 == IEEE80211_IF_TYPE_MGMT ||
(type1 == IEEE80211_IF_TYPE_AP &&
type2 == IEEE80211_IF_TYPE_WDS) ||
(type1 == IEEE80211_IF_TYPE_WDS &&
@@ -1990,6 +1991,20 @@ static int ieee80211_master_stop(struct
return 0;
}
+static int ieee80211_mgmt_open(struct net_device *dev)
+{
+ struct ieee80211_local *local = dev->priv;
+
+ if (!netif_running(local->mdev))
+ return -EOPNOTSUPP;
+ return 0;
+}
+
+static int ieee80211_mgmt_stop(struct net_device *dev)
+{
+ return 0;
+}
+
/* Check if running monitor interfaces should go to a "soft monitor" mode
* and switch them if necessary. */
static inline void ieee80211_start_soft_monitor(struct ieee80211_local *local)
@@ -2032,7 +2047,6 @@ static int ieee80211_open(struct net_dev
struct net_device *ndev = nsdata->dev;
if (ndev != dev && ndev != local->mdev &&
- ndev != local->apdev &&
netif_running(ndev) &&
memcmp(dev->dev_addr, ndev->dev_addr, ETH_ALEN) == 0 &&
!identical_mac_addr_allowed(sdata->type, nsdata->type)) {
@@ -2075,8 +2089,11 @@ static int ieee80211_open(struct net_dev
res = local->hw->open(sdata->master);
if (res == 0) {
res = dev_open(sdata->master);
- if (res && local->hw->stop)
- local->hw->stop(sdata->master);
+ if (res) {
+ if (local->hw->stop)
+ local->hw->stop(sdata->master);
+ } else if (local->apdev)
+ dev_open(local->apdev);
}
if (res) {
if (local->hw->remove_interface)
@@ -2119,6 +2136,8 @@ static int ieee80211_stop(struct net_dev
if (local->open_count == 0) {
ieee80211_stop_scan(sdata->master);
dev_close(sdata->master);
+ if (local->apdev)
+ dev_close(local->apdev);
if (local->hw->stop)
local->hw->stop(sdata->master);
}
@@ -2367,6 +2386,10 @@ ieee80211_rx_mgmt(struct net_device *dev
if (msg_type != ieee80211_msg_monitor)
dev = local->apdev;
+ if (!dev) {
+ dev_kfree_skb(skb);
+ return;
+ }
skb->dev = dev;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
@@ -3998,6 +4021,19 @@ void ieee80211_if_setup(struct net_devic
dev->destructor = ieee80211_if_free;
}
+void ieee80211_if_mgmt_setup(struct net_device *dev)
+{
+ ether_setup(dev);
+ dev->hard_start_xmit = ieee80211_mgmt_start_xmit;
+ dev->change_mtu = ieee80211_change_mtu_apdev;
+ dev->get_stats = ieee80211_get_stats;
+ dev->open = ieee80211_mgmt_open;
+ dev->stop = ieee80211_mgmt_stop;
+ dev->type = ARPHRD_IEEE80211_PRISM;
+ dev->hard_header_parse = header_parse_80211;
+ dev->tx_queue_len = 0;
+ dev->destructor = ieee80211_if_free;
+}
static void ieee80211_precalc_rates(struct ieee80211_hw *hw)
{
@@ -4018,57 +4054,43 @@ static void ieee80211_precalc_rates(stru
struct net_device *ieee80211_alloc_hw(size_t priv_data_len,
void (*setup)(struct net_device *))
{
- struct net_device *apdev, *mdev;
+ struct net_device *mdev;
struct ieee80211_local *local;
struct ieee80211_sub_if_data *sdata;
- int alloc_size;
+ int priv_size;
- /* Ensure 32-bit alignment of our private data and hw private data.
- * Each net_device is followed by a sub_if_data which which is used
- * for wds/vlan information; it is aligned as well.
+ /* Ensure 32-byte alignment of our private data and hw private data.
+ * Each net_device is followed by a sub_if_data which is used for
+ * interface specific information.
*
* Sample memory map looks something like:
*
* 0000 *****************
* * net_dev *
- * 015c *****************
+ * 0160 *****************
* * sub_if *
- * 017c *****************
+ * 0180 *****************
* * local *
- * 0b84 *****************
+ * 0b80 *****************
* * hw_priv *
* 1664 *****************
- * * ap net_dev *
- * 17c0 *****************
- * * sub_if *
- * *****************
*/
- alloc_size = sizeof(struct net_device) +
- sizeof(struct ieee80211_sub_if_data) + 3 +
- sizeof(struct ieee80211_local) + 3 +
- priv_data_len + 3 +
- sizeof(struct net_device) + 3 +
- sizeof(struct ieee80211_sub_if_data) + 3 +
- 4096;
- mdev = (struct net_device *) kzalloc(alloc_size, GFP_KERNEL);
+ priv_size = ((sizeof(struct ieee80211_sub_if_data) +
+ NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST) +
+ ((sizeof(struct ieee80211_local) +
+ NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST) +
+ priv_data_len;
+ mdev = alloc_netdev(priv_size, "wmaster%d", ether_setup);
if (mdev == NULL)
return NULL;
- mdev->priv = (struct net_device *)
- ((char *) mdev +
- ((sizeof(struct net_device) + 3) & ~3) +
- ((sizeof(struct ieee80211_sub_if_data) + 3) & ~3));
+ mdev->priv = (char *)netdev_priv(mdev) +
+ ((sizeof(struct ieee80211_sub_if_data) +
+ NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST);
local = mdev->priv;
- local->hw_priv = (void *)
- ((char *) local + ((sizeof(struct ieee80211_local) + 3) & ~3));
- apdev = (struct net_device *)
- ((char *) local->hw_priv + ((priv_data_len + 3) & ~3));
-
- ether_setup(mdev);
- memcpy(mdev->name, "wmaster%d", 10);
-
- if (strlen(mdev->name) + 2 >= sizeof(mdev->name))
- goto fail;
+ local->hw_priv = (char *)local +
+ ((sizeof(struct ieee80211_local) +
+ NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST);
local->dev_index = -1;
local->mdev = mdev;
@@ -4104,28 +4126,6 @@ struct net_device *ieee80211_alloc_hw(si
ieee80211_if_init(mdev);
- apdev = (struct net_device *)
- ((char *) local->hw_priv + ((priv_data_len + 3) & ~3));
- local->apdev = apdev;
- ether_setup(apdev);
- apdev->priv = local;
- apdev->hard_start_xmit = ieee80211_mgmt_start_xmit;
- apdev->change_mtu = ieee80211_change_mtu_apdev;
- apdev->get_stats = ieee80211_get_stats;
- apdev->open = ieee80211_open;
- apdev->stop = ieee80211_stop;
- apdev->type = ARPHRD_IEEE80211_PRISM;
- apdev->hard_header_parse = header_parse_80211;
- apdev->tx_queue_len = 0;
- sprintf(apdev->name, "%sap", mdev->name);
-
- sdata = IEEE80211_DEV_TO_SUB_IF(apdev);
- sdata->type = IEEE80211_IF_TYPE_MGMT;
- sdata->dev = apdev;
- sdata->master = mdev;
- sdata->local = local;
- list_add_tail(&sdata->list, &local->sub_if_list);
-
mdev->hard_start_xmit = ieee80211_master_start_xmit;
mdev->wireless_handlers =
(struct iw_handler_def *) &ieee80211_iw_handler_def;
@@ -4155,10 +4155,6 @@ struct net_device *ieee80211_alloc_hw(si
setup(mdev);
return mdev;
-
- fail:
- ieee80211_free_hw(mdev);
- return NULL;
}
@@ -4193,15 +4189,11 @@ int ieee80211_register_hw(struct net_dev
sta_info_start(local);
- result = register_netdev(local->apdev);
- if (result < 0)
- goto fail_1st_dev;
-
if (hw->fraglist)
dev->features |= NETIF_F_FRAGLIST;
result = register_netdev(dev);
if (result < 0)
- goto fail_2nd_dev;
+ goto fail_dev;
if (rate_control_initialize(local) < 0) {
printk(KERN_DEBUG "%s: Failed to initialize rate control "
@@ -4226,9 +4218,7 @@ int ieee80211_register_hw(struct net_dev
fail_rate:
unregister_netdev(dev);
-fail_2nd_dev:
- unregister_netdev(local->apdev);
-fail_1st_dev:
+fail_dev:
sta_info_stop(local);
ieee80211_unregister_sysfs(local);
fail_sysfs:
@@ -4247,12 +4237,6 @@ int ieee80211_update_hw(struct net_devic
if (hw->queues == 0)
hw->queues = 1;
- memcpy(local->apdev->dev_addr, dev->dev_addr, ETH_ALEN);
- local->apdev->base_addr = dev->base_addr;
- local->apdev->irq = dev->irq;
- local->apdev->mem_start = dev->mem_start;
- local->apdev->mem_end = dev->mem_end;
-
if (!hw->modes || !hw->modes->channels || !hw->modes->rates ||
!hw->modes->num_channels || !hw->modes->num_rates)
return -1;
@@ -4291,6 +4275,9 @@ void ieee80211_unregister_hw(struct net_
del_timer_sync(&local->scan_timer);
ieee80211_rx_bss_list_deinit(dev);
+ if (local->apdev)
+ ieee80211_if_del(local->apdev);
+
list_for_each_safe(ptr, n, &local->sub_if_list) {
struct ieee80211_sub_if_data *sdata =
list_entry(ptr, struct ieee80211_sub_if_data, list);
@@ -4323,7 +4310,7 @@ void ieee80211_unregister_hw(struct net_
void ieee80211_free_hw(struct net_device *dev)
{
- kfree(dev);
+ free_netdev(dev);
}
diff --git a/net/d80211/ieee80211_i.h b/net/d80211/ieee80211_i.h
index ee0b399..48aa9d3 100644
--- a/net/d80211/ieee80211_i.h
+++ b/net/d80211/ieee80211_i.h
@@ -307,11 +307,7 @@ #define NUM_DEFAULT_KEYS 4
int channel_use_raw;
};
-#define IEEE80211_DEV_TO_SUB_IF(dev) ((struct ieee80211_sub_if_data *) \
- ((char *)(dev) + ((sizeof(struct net_device) + 3) & ~3)))
-#define IEEE80211_SUB_IF_TO_DEV(sub_if) ((struct net_device *) \
- ((char *)(sub_if) - ((sizeof(struct net_device) + 3) & ~3)))
-
+#define IEEE80211_DEV_TO_SUB_IF(dev) netdev_priv(dev)
struct ieee80211_local {
struct ieee80211_hw *hw;
@@ -518,6 +514,7 @@ void ieee80211_prepare_rates(struct net_
void ieee80211_tx_set_iswep(struct ieee80211_txrx_data *tx);
int ieee80211_if_update_wds(struct net_device *dev, u8 *remote_addr);
void ieee80211_if_setup(struct net_device *dev);
+void ieee80211_if_mgmt_setup(struct net_device *dev);
/* ieee80211_ioctl.c */
int ieee80211_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
@@ -595,6 +592,8 @@ int ieee80211_if_remove(struct net_devic
void ieee80211_if_free(struct net_device *dev);
void ieee80211_if_flush(struct net_device *dev);
void ieee80211_if_sdata_init(struct ieee80211_sub_if_data *sdata);
+int ieee80211_if_add_mgmt(struct net_device *dev);
+void ieee80211_if_del_mgmt(struct net_device *dev);
/* ieee80211_sysfs.c */
int ieee80211_register_sysfs(struct ieee80211_local *local);
diff --git a/net/d80211/ieee80211_iface.c b/net/d80211/ieee80211_iface.c
index f3ce45f..8a2f7f5 100644
--- a/net/d80211/ieee80211_iface.c
+++ b/net/d80211/ieee80211_iface.c
@@ -31,16 +31,12 @@ int ieee80211_if_add(struct net_device *
struct net_device *ndev, *tmp_dev;
struct ieee80211_local *local = dev->priv;
struct ieee80211_sub_if_data *sdata = NULL, *sdata_parent;
- int alloc_size;
int ret;
int i;
ASSERT_RTNL();
- /* ensure 32-bit alignment of our private data and hw private data */
- alloc_size = sizeof(struct net_device) + 3 +
- sizeof(struct ieee80211_sub_if_data) + 3;
-
- ndev = *new_dev = (struct net_device *) kzalloc(alloc_size, GFP_KERNEL);
+ ndev = *new_dev = alloc_netdev(sizeof(struct ieee80211_sub_if_data),
+ "", ieee80211_if_setup);
if (ndev == NULL)
return -ENOMEM;
@@ -68,7 +64,6 @@ int ieee80211_if_add(struct net_device *
ndev->mem_start = dev->mem_start;
ndev->mem_end = dev->mem_end;
ndev->flags = dev->flags & IFF_MULTICAST;
- ieee80211_if_setup(ndev);
sdata = IEEE80211_DEV_TO_SUB_IF(ndev);
sdata->type = IEEE80211_IF_TYPE_AP;
@@ -88,11 +83,66 @@ int ieee80211_if_add(struct net_device *
return 0;
fail:
- kfree(ndev);
+ free_netdev(ndev);
*new_dev = NULL;
return ret;
}
+int ieee80211_if_add_mgmt(struct net_device *dev)
+{
+ struct net_device *ndev;
+ struct ieee80211_local *local = dev->priv;
+ struct ieee80211_sub_if_data *sdata, *nsdata;
+ int ret;
+
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ ASSERT_RTNL();
+
+ ndev = alloc_netdev(sizeof(struct ieee80211_sub_if_data), "",
+ ieee80211_if_mgmt_setup);
+ if (ndev == NULL)
+ return -ENOMEM;
+ ret = dev_alloc_name(ndev, "wmgmt%d");
+ if (ret)
+ goto fail;
+
+ ndev->priv = local;
+ memcpy(ndev->dev_addr, dev->dev_addr, ETH_ALEN);
+ ndev->base_addr = dev->base_addr;
+ ndev->irq = dev->irq;
+ ndev->mem_start = dev->mem_start;
+ ndev->mem_end = dev->mem_end;
+
+ nsdata = IEEE80211_DEV_TO_SUB_IF(ndev);
+ nsdata->type = IEEE80211_IF_TYPE_MGMT;
+ nsdata->master = local->mdev;
+ nsdata->dev = ndev;
+ nsdata->local = local;
+ ieee80211_if_sdata_init(nsdata);
+
+ ret = register_netdevice(ndev);
+ if (ret)
+ goto fail;
+ if (local->open_count > 0)
+ dev_open(ndev);
+ local->apdev = ndev;
+ return 0;
+fail:
+ free_netdev(ndev);
+ return ret;
+}
+
+void ieee80211_if_del_mgmt(struct net_device *dev)
+{
+ struct ieee80211_local *local = dev->priv;
+ struct net_device *apdev;
+
+ ASSERT_RTNL();
+ apdev = local->apdev;
+ local->apdev = NULL;
+ unregister_netdevice(apdev);
+}
+
void ieee80211_if_set_type(struct net_device *dev, int type)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
@@ -110,6 +160,7 @@ void ieee80211_if_set_type(struct net_de
sdata->u.ap.max_ratectrl_rateidx = -1;
skb_queue_head_init(&sdata->u.ap.ps_bc_buf);
sdata->bss = &sdata->u.ap;
+ sdata->type = IEEE80211_IF_TYPE_STA;
break;
case IEEE80211_IF_TYPE_STA:
case IEEE80211_IF_TYPE_IBSS: {
@@ -244,9 +295,8 @@ void __ieee80211_if_del(struct ieee80211
list_del(&sdata->list);
ieee80211_proc_deinit_virtual(dev);
unregister_netdevice(dev);
- /* Default data device and management device are allocated with the
- * master device. All other devices are separately allocated and will
- * be freed by net_device->destructor (i. e. ieee80211_if_free). */
+ /* Except master interface, the net_device will be freed by
+ * net_device->destructor (i. e. ieee80211_if_free). */
}
/* Must be called with rtnl lock held. */
@@ -263,8 +313,7 @@ int ieee80211_if_remove(struct net_devic
list_for_each_entry_safe(sdata, n, &local->sub_if_list, list) {
if ((sdata->type == id || id == -1) &&
strcmp(name, sdata->dev->name) == 0 &&
- sdata->dev != local->mdev &&
- sdata->dev != local->apdev) {
+ sdata->dev != local->mdev) {
__ieee80211_if_del(local, sdata);
return 0;
}
@@ -277,7 +326,7 @@ void ieee80211_if_free(struct net_device
struct ieee80211_local *local = dev->priv;
BUG_ON(dev == local->mdev || dev == local->apdev);
- kfree(dev);
+ free_netdev(dev);
}
/* Must be called with rtnl lock held. */
@@ -298,6 +347,9 @@ void ieee80211_if_del(struct net_device
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
rtnl_lock();
- __ieee80211_if_del(local, sdata);
+ if (sdata->type == IEEE80211_IF_TYPE_MGMT)
+ ieee80211_if_del_mgmt(local->mdev);
+ else
+ __ieee80211_if_del(local, sdata);
rtnl_unlock();
}
diff --git a/net/d80211/ieee80211_ioctl.c b/net/d80211/ieee80211_ioctl.c
index 5d31a8f..0bfa361 100644
--- a/net/d80211/ieee80211_ioctl.c
+++ b/net/d80211/ieee80211_ioctl.c
@@ -2469,6 +2469,16 @@ static int ieee80211_ioctl_prism2_param(
case PRISM2_PARAM_SPECTRUM_MGMT:
local->conf.spect_mgmt = value;
break;
+ case PRISM2_PARAM_MGMT_IF:
+ if (value == 1) {
+ if (local->apdev == NULL)
+ ret = ieee80211_if_add_mgmt(local->mdev);
+ } else if (value == 0) {
+ if (local->apdev)
+ ieee80211_if_del_mgmt(local->mdev);
+ } else
+ ret = -EINVAL;
+ break;
default:
ret = -EOPNOTSUPP;
break;
@@ -2651,6 +2661,12 @@ static int ieee80211_ioctl_get_prism2_pa
else
*param = !!sdata->u.sta.wmm_enabled;
break;
+ case PRISM2_PARAM_MGMT_IF:
+ if (local->apdev)
+ *param = local->apdev->ifindex;
+ else
+ ret = -ENOENT;
+ break;
default:
ret = -EOPNOTSUPP;
diff --git a/scripts/bcm43xx-d80211-sta_up.sh b/scripts/bcm43xx-d80211-sta_up.sh
deleted file mode 100755
index a21ddff..0000000
--- a/scripts/bcm43xx-d80211-sta_up.sh
+++ /dev/null
@@ -1,80 +0,0 @@
-#!/bin/bash
-
-if [ "$1" == "--help" ] || [ "$1" == "-h" ]; then
- echo "$0, an ugly script to configure and bring up a STA (802.11 station)"
- echo "device for the linux devicescape 802.11 stack."
- echo
- echo "Usage:"
- echo "$0 [ wlan_device local_ip wpasupplicant_config ]"
- echo
- echo "Examples:"
- echo "Run with default parameters: $0"
- echo "Manually define parameters: $0 wlan0 192.168.1.1 ./wpasupp.conf"
- echo
- echo "Default parameters are: $0 wlan0 192.168.1.101 /etc/wpa_supplicant.conf"
- exit 1
-fi
-
-wlan_dev="$1"
-ip_addr="$2"
-wpasupp_conf="$3"
-
-if [ -z "$wlan_dev" ]; then
- wlan_dev="wlan0"
-fi
-if [ -z "$sta_dev" ]; then
- sta_dev="sta0"
-fi
-if [ -z "$ip_addr" ]; then
- ip_addr="192.168.1.101"
-fi
-if [ -z "$wpasupp_conf" ]; then
- wpasupp_conf="/etc/wpa_supplicant.conf"
-fi
-
-idx=$(echo $wlan_dev | awk '{ gsub("[^0-9]", "", $0); printf($0); }')
-if [ -z "$idx" ]; then
- echo "Invalid wlan_device parameter \"$wlan_dev\". Example: wlan0"
- exit 1
-fi
-sta_dev="sta$idx"
-phy_dev="phy$idx"
-
-function run()
-{
- echo "$@"
- $@
- res=$?
- if [ $res -ne 0 ]; then
- echo "FAILED ($res)"
- exit 1
- fi
-}
-
-if [ -z "$(grep -e bcm43xx /proc/modules)" ]; then
- echo "ERROR: bcm43xx module not loaded."
- exit 1
-fi
-
-killall wpa_supplicant 2>/dev/null
-echo -n "$sta_dev" > /sys/class/ieee80211/${phy_dev}/add_iface
-if [ $? -ne 0 ]; then
- echo "ERROR: Could not add STA device."
- exit 1
-fi
-run iwconfig $wlan_dev.11 mode managed
-run ifconfig $wlan_dev.11 up
-
-hwaddr="$(ifconfig | grep $wlan_dev.11 | awk '{print $NF}')"
-run ifconfig $sta_dev hw ether $hwaddr
-run ifconfig $sta_dev $ip_addr
-run ifconfig $sta_dev up
-run iwconfig $sta_dev mode managed
-
-run wpa_supplicant -B -Dwext -i$sta_dev -c$wpasupp_conf
-
-echo
-echo "You may want to set the default route, now:"
-echo " route add default gw GATEWAY_IP_ADDRESS"
-
-exit 0
--
John W. Linville
linville@tuxdriver.com
next reply other threads:[~2006-05-19 19:16 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-19 19:15 John W. Linville [this message]
2006-05-22 12:42 ` wireless-dev updated Jiri Benc
2006-05-22 19:55 ` John W. Linville
2006-05-22 20:32 ` Jiri Benc
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060519191549.GF30177@tuxdriver.com \
--to=linville@tuxdriver.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).