From: Grant Grundler <grundler@parisc-linux.org>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: Grant Grundler <grundler@parisc-linux.org>,
Andrew Morton <akpm@osdl.org>,
netdev@vger.kernel.org, Val Henson <val.henson@gmail.com>
Subject: Re: PATCH 2.6.17-rc5 tulip free_irq() called too late
Date: Thu, 8 Jun 2006 11:01:20 -0600 [thread overview]
Message-ID: <20060608170120.GI8246@colo.lackof.org> (raw)
In-Reply-To: <44883778.8000209@pobox.com>
On Thu, Jun 08, 2006 at 10:43:04AM -0400, Jeff Garzik wrote:
...
> Perhaps cp_close() in 8139cp.c could be an example of a good ordering?
> It stops the chip, syncs irqs, frees irq, then frees [thus unmapping]
> the rings.
Here is a new patch that moves free_irq() into tulip_down().
The resulting code is structured the same as cp_close().
While I believe the code is correct, I'm not real happy
that tulip_up() and tulip_down() don't both deal with IRQs.
(ie not symetrical). Oh well, I can submit another patch
for that if Val doesn't want to wrangle that herself.
This is compile tested only.
I'll drop it on ia64/parisc servers later and retest.
thanks,
grant
Index: drivers/net/tulip/tulip_core.c
===================================================================
RCS file: /var/cvs/linux-2.6/drivers/net/tulip/tulip_core.c,v
retrieving revision 1.35
diff -u -p -r1.35 tulip_core.c
--- drivers/net/tulip/tulip_core.c 23 Apr 2006 15:18:28 -0000 1.35
+++ drivers/net/tulip/tulip_core.c 8 Jun 2006 16:25:43 -0000
@@ -18,11 +18,11 @@
#define DRV_NAME "tulip"
#ifdef CONFIG_TULIP_NAPI
-#define DRV_VERSION "1.1.13-NAPI" /* Keep at least for test */
+#define DRV_VERSION "1.1.14-NAPI" /* Keep at least for test */
#else
-#define DRV_VERSION "1.1.13"
+#define DRV_VERSION "1.1.14"
#endif
-#define DRV_RELDATE "December 15, 2004"
+#define DRV_RELDATE "May 6, 2006"
#include <linux/module.h>
@@ -743,6 +745,11 @@ static void tulip_down (struct net_devic
/* Stop the Tx and Rx processes. */
tulip_stop_rxtx(tp);
+ spin_unlock_irqrestore (&tp->lock, flags);
+
+ synchronize_irq(dev->irq);
+ free_irq (dev->irq, dev);
+
/* prepare receive buffers */
tulip_refill_rx(dev);
@@ -752,7 +759,6 @@ static void tulip_down (struct net_devic
if (ioread32 (ioaddr + CSR6) != 0xffffffff)
tp->stats.rx_missed_errors += ioread32 (ioaddr + CSR8) & 0xffff;
- spin_unlock_irqrestore (&tp->lock, flags);
init_timer(&tp->timer);
tp->timer.data = (unsigned long)dev;
@@ -774,14 +780,13 @@ static int tulip_close (struct net_devic
int i;
netif_stop_queue (dev);
tulip_down (dev);
if (tulip_debug > 1)
printk (KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
dev->name, ioread32 (ioaddr + CSR5));
- free_irq (dev->irq, dev);
/* Free all the skbuffs in the Rx queue. */
for (i = 0; i < RX_RING_SIZE; i++) {
@@ -1750,7 +1757,6 @@ static int tulip_suspend (struct pci_dev
tulip_down(dev);
netif_device_detach(dev);
- free_irq(dev->irq, dev);
pci_save_state(pdev);
pci_disable_device(pdev);
next prev parent reply other threads:[~2006-06-08 17:01 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-31 19:52 PATCH 2.6.17-rc5 tulip free_irq() called too late Grant Grundler
2006-06-08 14:43 ` Jeff Garzik
2006-06-08 15:22 ` Grant Grundler
2006-06-08 15:32 ` Grant Grundler
2006-06-08 15:38 ` Jeff Garzik
2006-06-08 15:47 ` Grant Grundler
2006-06-08 15:32 ` Jeff Garzik
2006-06-08 15:36 ` Grant Grundler
2006-06-08 17:01 ` Grant Grundler [this message]
2006-06-13 23:55 ` PATCHv3 " Grant Grundler
2006-06-14 0:06 ` Valerie Henson
2006-06-14 0:33 ` Jeff Garzik
2006-06-14 4:44 ` Grant Grundler
2006-06-14 13:05 ` Kyle McMartin
2006-06-14 14:54 ` Grant Grundler
2006-06-14 15:03 ` Jeff Garzik
2006-06-14 18:14 ` Grant Grundler
2006-06-14 19:51 ` Jeff Garzik
2006-06-14 22:25 ` Grant Grundler
2006-06-14 20:47 ` Francois Romieu
2006-06-14 22:30 ` Grant Grundler
2006-06-15 20:30 ` Francois Romieu
2006-06-16 5:47 ` Grant Grundler
2006-06-16 7:32 ` Jeff Garzik
2006-06-16 15:25 ` Grant Grundler
[not found] ` <20060616152400.GA7868@colo.lackof.org>
[not found] ` <4492CE98.50900@pobox.com>
2006-06-16 16:06 ` Grant Grundler
2006-06-16 16:16 ` Jeff Garzik
2006-06-22 0:43 ` Valerie Henson
2006-06-23 5:00 ` Grant Grundler
2006-06-26 22:31 ` [PATCH] Fix tulip shutdown DMA/irq race Valerie Henson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060608170120.GI8246@colo.lackof.org \
--to=grundler@parisc-linux.org \
--cc=akpm@osdl.org \
--cc=jgarzik@pobox.com \
--cc=netdev@vger.kernel.org \
--cc=val.henson@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).