From: akpm@osdl.org
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, akpm@osdl.org, jmorris@namei.org
Subject: [patch 8/9] secmark: Add CONNSECMARK xtables target
Date: Thu, 08 Jun 2006 22:20:58 -0700 [thread overview]
Message-ID: <200606090520.k595KwnD032104@shell0.pdx.osdl.net> (raw)
From: James Morris <jmorris@namei.org>
Add a new xtables target, CONNSECMARK, which is used to specify rules for
copying security marks from packets to connections, and for copyying security
marks back from connections to packets. This is similar to the CONNMARK
target, but is more limited in scope in that it only allows copying of
security marks to and from packets, as this is all it needs to do.
A typical scenario would be to apply a security mark to a 'new' packet with
SECMARK, then copy that to its conntrack via CONNMARK, and then restore the
security mark from the connection to established and related packets on that
connection.
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
---
include/linux/netfilter/xt_CONNSECMARK.h | 13 +
net/netfilter/Kconfig | 11 +
net/netfilter/Makefile | 1
net/netfilter/xt_CONNSECMARK.c | 155 +++++++++++++++++++++
4 files changed, 180 insertions(+)
diff -puN /dev/null include/linux/netfilter/xt_CONNSECMARK.h
--- /dev/null 2006-06-01 17:04:03.273681250 -0700
+++ devel-akpm/include/linux/netfilter/xt_CONNSECMARK.h 2006-06-01 20:31:50.000000000 -0700
@@ -0,0 +1,13 @@
+#ifndef _XT_CONNSECMARK_H_target
+#define _XT_CONNSECMARK_H_target
+
+enum {
+ CONNSECMARK_SAVE = 1,
+ CONNSECMARK_RESTORE,
+};
+
+struct xt_connsecmark_target_info {
+ u_int8_t mode;
+};
+
+#endif /*_XT_CONNSECMARK_H_target */
diff -puN net/netfilter/Kconfig~secmark-add-connsecmark-xtables-target net/netfilter/Kconfig
--- devel/net/netfilter/Kconfig~secmark-add-connsecmark-xtables-target 2006-06-01 20:31:50.000000000 -0700
+++ devel-akpm/net/netfilter/Kconfig 2006-06-01 20:31:50.000000000 -0700
@@ -195,6 +195,17 @@ config NETFILTER_XT_TARGET_SECMARK
To compile it as a module, choose M here. If unsure, say N.
+config NETFILTER_XT_TARGET_CONNSECMARK
+ tristate '"CONNSECMARK" target support'
+ depends on NETFILTER_XTABLES && (NF_CONNTRACK_SECMARK || IP_NF_CONNTRACK_SECMARK)
+ help
+ The CONNSECMARK target copies security markings from packets
+ to connections, and restores security markings from connections
+ to packets (if the packets are not already marked). This would
+ normally be used in conjunction with the SECMARK target.
+
+ To compile it as a module, choose M here. If unsure, say N.
+
config NETFILTER_XT_MATCH_COMMENT
tristate '"comment" match support'
depends on NETFILTER_XTABLES
diff -puN net/netfilter/Makefile~secmark-add-connsecmark-xtables-target net/netfilter/Makefile
--- devel/net/netfilter/Makefile~secmark-add-connsecmark-xtables-target 2006-06-01 20:31:50.000000000 -0700
+++ devel-akpm/net/netfilter/Makefile 2006-06-01 20:31:50.000000000 -0700
@@ -29,6 +29,7 @@ obj-$(CONFIG_NETFILTER_XT_TARGET_MARK) +
obj-$(CONFIG_NETFILTER_XT_TARGET_NFQUEUE) += xt_NFQUEUE.o
obj-$(CONFIG_NETFILTER_XT_TARGET_NOTRACK) += xt_NOTRACK.o
obj-$(CONFIG_NETFILTER_XT_TARGET_SECMARK) += xt_SECMARK.o
+obj-$(CONFIG_NETFILTER_XT_TARGET_CONNSECMARK) += xt_CONNSECMARK.o
# matches
obj-$(CONFIG_NETFILTER_XT_MATCH_COMMENT) += xt_comment.o
diff -puN /dev/null net/netfilter/xt_CONNSECMARK.c
--- /dev/null 2006-06-01 17:04:03.273681250 -0700
+++ devel-akpm/net/netfilter/xt_CONNSECMARK.c 2006-06-01 20:31:50.000000000 -0700
@@ -0,0 +1,155 @@
+/*
+ * This module is used to copy security markings from packets
+ * to connections, and restore security markings from connections
+ * back to packets. This would normally be performed in conjunction
+ * with the SECMARK target and state match.
+ *
+ * Based somewhat on CONNMARK:
+ * Copyright (C) 2002,2004 MARA Systems AB <http://www.marasystems.com>
+ * by Henrik Nordstrom <hno@marasystems.com>
+ *
+ * (C) 2006 Red Hat, Inc., James Morris <jmorris@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/module.h>
+#include <linux/skbuff.h>
+#include <linux/netfilter/x_tables.h>
+#include <linux/netfilter/xt_CONNSECMARK.h>
+#include <net/netfilter/nf_conntrack_compat.h>
+
+#define PFX "CONNSECMARK: "
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("James Morris <jmorris@redhat.com>");
+MODULE_DESCRIPTION("ip[6]tables CONNSECMARK module");
+MODULE_ALIAS("ipt_CONNSECMARK");
+MODULE_ALIAS("ip6t_CONNSECMARK");
+
+/*
+ * If the packet has a security mark and the connection does not, copy
+ * the security mark from the packet to the connection.
+ */
+static void secmark_save(struct sk_buff *skb)
+{
+ if (skb->secmark) {
+ u32 *connsecmark;
+ enum ip_conntrack_info ctinfo;
+
+ connsecmark = nf_ct_get_secmark(skb, &ctinfo);
+ if (connsecmark && !*connsecmark)
+ if (*connsecmark != skb->secmark)
+ *connsecmark = skb->secmark;
+ }
+}
+
+/*
+ * If packet has no security mark, and the connection does, restore the
+ * security mark from the connection to the packet.
+ */
+static void secmark_restore(struct sk_buff *skb)
+{
+ if (!skb->secmark) {
+ u32 *connsecmark;
+ enum ip_conntrack_info ctinfo;
+
+ connsecmark = nf_ct_get_secmark(skb, &ctinfo);
+ if (connsecmark && *connsecmark)
+ if (skb->secmark != *connsecmark)
+ skb->secmark = *connsecmark;
+ }
+}
+
+static unsigned int target(struct sk_buff **pskb, const struct net_device *in,
+ const struct net_device *out, unsigned int hooknum,
+ const struct xt_target *target,
+ const void *targinfo, void *userinfo)
+{
+ struct sk_buff *skb = *pskb;
+ const struct xt_connsecmark_target_info *info = targinfo;
+
+ switch (info->mode) {
+ case CONNSECMARK_SAVE:
+ secmark_save(skb);
+ break;
+
+ case CONNSECMARK_RESTORE:
+ secmark_restore(skb);
+ break;
+
+ default:
+ BUG();
+ }
+
+ return XT_CONTINUE;
+}
+
+static int checkentry(const char *tablename, const void *entry,
+ const struct xt_target *target, void *targinfo,
+ unsigned int targinfosize, unsigned int hook_mask)
+{
+ struct xt_connsecmark_target_info *info = targinfo;
+
+ switch (info->mode) {
+ case CONNSECMARK_SAVE:
+ case CONNSECMARK_RESTORE:
+ break;
+
+ default:
+ printk(KERN_INFO PFX "invalid mode: %hu\n", info->mode);
+ return 0;
+ }
+
+ return 1;
+}
+
+static struct xt_target ipt_connsecmark_reg = {
+ .name = "CONNSECMARK",
+ .target = target,
+ .targetsize = sizeof(struct xt_connsecmark_target_info),
+ .table = "mangle",
+ .checkentry = checkentry,
+ .me = THIS_MODULE,
+ .family = AF_INET,
+ .revision = 0,
+};
+
+static struct xt_target ip6t_connsecmark_reg = {
+ .name = "CONNSECMARK",
+ .target = target,
+ .targetsize = sizeof(struct xt_connsecmark_target_info),
+ .table = "mangle",
+ .checkentry = checkentry,
+ .me = THIS_MODULE,
+ .family = AF_INET6,
+ .revision = 0,
+};
+
+static int __init xt_connsecmark_init(void)
+{
+ int err;
+
+ need_conntrack();
+
+ err = xt_register_target(&ipt_connsecmark_reg);
+ if (err)
+ return err;
+
+ err = xt_register_target(&ip6t_connsecmark_reg);
+ if (err)
+ xt_unregister_target(&ipt_connsecmark_reg);
+
+ return err;
+}
+
+static void __exit xt_connsecmark_fini(void)
+{
+ xt_unregister_target(&ip6t_connsecmark_reg);
+ xt_unregister_target(&ipt_connsecmark_reg);
+}
+
+module_init(xt_connsecmark_init);
+module_exit(xt_connsecmark_fini);
_
next reply other threads:[~2006-06-09 5:21 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-09 5:20 akpm [this message]
2006-06-09 7:32 ` [patch 8/9] secmark: Add CONNSECMARK xtables target David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200606090520.k595KwnD032104@shell0.pdx.osdl.net \
--to=akpm@osdl.org \
--cc=davem@davemloft.net \
--cc=jmorris@namei.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).