From: Andrew Morton <akpm@osdl.org>
To: "Ron Mercer" <ron.mercer@qlogic.com>
Cc: jeff@garzik.org, linux-driver@qlogic.com, netdev@vger.kernel.org
Subject: Re: New Qlogic qla3xxx NIC Driver v2.02.00k31 for upstream inclusion
Date: Wed, 21 Jun 2006 21:55:31 -0700 [thread overview]
Message-ID: <20060621215531.14812d7c.akpm@osdl.org> (raw)
In-Reply-To: <0BB3E5E7462EEA4295BC02D49691DC07176751@AVEXCH1.qlogic.org>
On Wed, 21 Jun 2006 14:24:27 -0700
"Ron Mercer" <ron.mercer@qlogic.com> wrote:
> Please add the qla3xxx NIC driver to the next netdev-2.6 GIT tree.
- We won't be able to include this withot a Signed-off-by: as per section
11 of Documentation/SubmittingPatches.
- The driver does a lot of:
static void ql_write_page0_reg(struct ql3_adapter *qdev,
volatile u32 * pRegister, u32 value)
{
...
writel(value, (u32 *) pRegister);
The volatile is undesirable (and, for writel, unneeded) (and ity has been
typecast away anwyay).
And the arg to writel is of the type `void __iomem *'. Really, this
function should take an arg of type `void __iomem *pRegister' or `u32
__iomem *pRegister'.
Treat __iomem as a C type, and propagate it correctly from top to bottom
and you cannot go wrong.
- What's going on here?
static void fm93c56a_deselect(struct ql3_adapter *qdev)
{
struct ql3xxx_port_registers *port_regs =
(struct ql3xxx_port_registers *)qdev->mem_map_registers;
->mem_map_registers is already of type `struct ql3xxx_port_registers
__iomem *', so all the cast here does is to remove the __iomem, making
the code incorrect...
(many instances)
- Is there a better way of doing this?
static void ql_swap_mac_addr(u8 * macAddress)
{
#ifdef __BIG_ENDIAN
u8 temp;
temp = macAddress[0];
macAddress[0] = macAddress[1];
macAddress[1] = temp;
temp = macAddress[2];
macAddress[2] = macAddress[3];
macAddress[3] = temp;
temp = macAddress[4];
macAddress[4] = macAddress[5];
macAddress[5] = temp;
#endif
}
It seems like a common sort of thing to do?
- ql_mii_write_reg_ex() has two up-to-10-millisecond busywaits.
- In fact, those up-to-10-millisecond busywaits are all over the place.
- The driver would be cleaner if it had a helper function rather than
open-coding all those up-to-10-millisecond busywaits.
Have some random tweaks:
From: Andrew Morton <akpm@osdl.org>
- coding style
- use cpu_relax()
- use msleep()
Cc: "Ron Mercer" <ron.mercer@qlogic.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
---
drivers/net/qla3xxx.c | 164 +++++++++++++++-------------------------
1 file changed, 65 insertions(+), 99 deletions(-)
diff -puN drivers/net/qla3xxx.c~qla3xxx-NIC-driver-tidy drivers/net/qla3xxx.c
--- a/drivers/net/qla3xxx.c~qla3xxx-NIC-driver-tidy
+++ a/drivers/net/qla3xxx.c
@@ -57,7 +57,7 @@ static int debug = -1; /* defaults abov
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
-static int msi = 0;
+static int msi;
module_param(msi, int, 0);
MODULE_PARM_DESC(msi, "Turn on Message Signaled Interrupts.");
@@ -84,6 +84,7 @@ static void ql_sem_spinlock(struct ql3_a
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
if ((value & (sem_mask >> 16)) == sem_bits)
break;
+ cpu_relax();
}
}
@@ -121,12 +122,11 @@ static int ql_wait_for_drvr_lock(struct
(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index)
* 2) << 1)) {
if (i < 10) {
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(1 * HZ);
+ msleep(1000);
i++;
} else {
- printk(KERN_ERR PFX
- "%s: Timed out waiting for driver lock...\n",
+ printk(KERN_ERR PFX "%s: Timed out waiting for "
+ "driver lock...\n",
qdev->ndev->name);
return 0;
}
@@ -149,7 +149,7 @@ static u32 ql_read_common_reg(struct ql3
value = readl(pRegister);
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
- return (value);
+ return value;
}
static u32 ql_read_page0_reg(struct ql3_adapter *qdev, volatile u32 * pRegister)
@@ -170,7 +170,7 @@ static u32 ql_read_page0_reg(struct ql3_
value = readl(pRegister);
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
- return (value);
+ return value;
}
static void ql_write_common_reg(struct ql3_adapter *qdev,
@@ -324,7 +324,7 @@ static struct ql_rcv_buf_cb *ql_get_from
qdev->lrg_buf_free_count--;
}
- return (lrg_buf_cb);
+ return lrg_buf_cb;
}
static u32 addrBits = EEPROM_NO_ADDR_BITS;
@@ -439,7 +439,7 @@ static void fm93c56a_deselect(struct ql3
{
struct ql3xxx_port_registers *port_regs =
(struct ql3xxx_port_registers *)qdev->mem_map_registers;
- qdev->eeprom_cmd_data = AUBURN_EEPROM_CS_0;
+ qdev->eeprom_cmd_data = AUBURN_EEPROM_CS_0;
ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
ISP_NVRAM_MASK | qdev->eeprom_cmd_data);
}
@@ -618,12 +618,11 @@ static int ql_mii_write_reg_ex(struct ql
count = 1000;
while (count) {
temp = ql_read_page0_reg(qdev, &port_regs->macMIIStatusReg);
- if (!(temp & MAC_MII_STATUS_BSY)) {
+ if (!(temp & MAC_MII_STATUS_BSY))
break;
- }
udelay(10);
count--;
- };
+ }
if (!count) {
if (netif_msg_link(qdev))
printk(KERN_WARNING PFX
@@ -643,12 +642,11 @@ static int ql_mii_write_reg_ex(struct ql
count = 1000;
while (count) {
temp = ql_read_page0_reg(qdev, &port_regs->macMIIStatusReg);
- if (!(temp & MAC_MII_STATUS_BSY)) {
+ if (!(temp & MAC_MII_STATUS_BSY))
break;
- }
udelay(10);
count--;
- };
+ }
if (!count) {
if (netif_msg_link(qdev))
printk(KERN_WARNING PFX
@@ -684,12 +682,11 @@ static int ql_mii_read_reg_ex(struct ql3
count = 1000;
while (count) {
temp = ql_read_page0_reg(qdev, &port_regs->macMIIStatusReg);
- if (!(temp & MAC_MII_STATUS_BSY)) {
+ if (!(temp & MAC_MII_STATUS_BSY))
break;
- }
udelay(10);
count--;
- };
+ }
if (!count) {
if (netif_msg_link(qdev))
printk(KERN_WARNING PFX
@@ -713,12 +710,11 @@ static int ql_mii_read_reg_ex(struct ql3
count = 1000;
while (count) {
temp = ql_read_page0_reg(qdev, &port_regs->macMIIStatusReg);
- if (!(temp & MAC_MII_STATUS_BSY)) {
+ if (!(temp & MAC_MII_STATUS_BSY))
break;
- }
udelay(10);
count--;
- };
+ }
if (!count) {
if (netif_msg_link(qdev))
printk(KERN_WARNING PFX
@@ -756,12 +752,11 @@ static int ql_mii_write_reg(struct ql3_a
count = 1000;
while (count) {
temp = ql_read_page0_reg(qdev, &port_regs->macMIIStatusReg);
- if (!(temp & MAC_MII_STATUS_BSY)) {
+ if (!(temp & MAC_MII_STATUS_BSY))
break;
- }
udelay(10);
count--;
- };
+ }
if (!count) {
if (netif_msg_link(qdev))
printk(KERN_WARNING PFX
@@ -781,12 +776,11 @@ static int ql_mii_write_reg(struct ql3_a
count = 1000;
while (count) {
temp = ql_read_page0_reg(qdev, &port_regs->macMIIStatusReg);
- if (!(temp & MAC_MII_STATUS_BSY)) {
+ if (!(temp & MAC_MII_STATUS_BSY))
break;
- }
udelay(10);
count--;
- };
+ }
if (!count) {
if (netif_msg_link(qdev))
printk(KERN_WARNING PFX
@@ -803,7 +797,7 @@ static int ql_mii_write_reg(struct ql3_a
return 0;
}
-static int ql_mii_read_reg(struct ql3_adapter *qdev, u16 regAddr, u16 * value)
+static int ql_mii_read_reg(struct ql3_adapter *qdev, u16 regAddr, u16 *value)
{
u32 temp;
struct ql3xxx_port_registers *port_regs =
@@ -819,12 +813,11 @@ static int ql_mii_read_reg(struct ql3_ad
count = 1000;
while (count) {
temp = ql_read_page0_reg(qdev, &port_regs->macMIIStatusReg);
- if (!(temp & MAC_MII_STATUS_BSY)) {
+ if (!(temp & MAC_MII_STATUS_BSY))
break;
- }
udelay(10);
count--;
- };
+ }
if (!count) {
if (netif_msg_link(qdev))
printk(KERN_WARNING PFX
@@ -848,12 +841,11 @@ static int ql_mii_read_reg(struct ql3_ad
count = 1000;
while (count) {
temp = ql_read_page0_reg(qdev, &port_regs->macMIIStatusReg);
- if (!(temp & MAC_MII_STATUS_BSY)) {
+ if (!(temp & MAC_MII_STATUS_BSY))
break;
- }
udelay(10);
count--;
- };
+ }
if (!count) {
if (netif_msg_link(qdev))
printk(KERN_WARNING PFX
@@ -992,11 +984,10 @@ static void ql_mac_enable(struct ql3_ada
else
value = (MAC_CONFIG_REG_PE << 16);
- if (qdev->mac_index) {
+ if (qdev->mac_index)
ql_write_page0_reg(qdev, &port_regs->mac1ConfigReg, value);
- } else {
+ else
ql_write_page0_reg(qdev, &port_regs->mac0ConfigReg, value);
- }
}
static void ql_mac_cfg_soft_reset(struct ql3_adapter *qdev, u32 enable)
@@ -1010,11 +1001,10 @@ static void ql_mac_cfg_soft_reset(struct
else
value = (MAC_CONFIG_REG_SR << 16);
- if (qdev->mac_index) {
+ if (qdev->mac_index)
ql_write_page0_reg(qdev, &port_regs->mac1ConfigReg, value);
- } else {
+ else
ql_write_page0_reg(qdev, &port_regs->mac0ConfigReg, value);
- }
}
static void ql_mac_cfg_gig(struct ql3_adapter *qdev, u32 enable)
@@ -1028,11 +1018,10 @@ static void ql_mac_cfg_gig(struct ql3_ad
else
value = (MAC_CONFIG_REG_GM << 16);
- if (qdev->mac_index) {
+ if (qdev->mac_index)
ql_write_page0_reg(qdev, &port_regs->mac1ConfigReg, value);
- } else {
+ else
ql_write_page0_reg(qdev, &port_regs->mac0ConfigReg, value);
- }
}
static void ql_mac_cfg_full_dup(struct ql3_adapter *qdev, u32 enable)
@@ -1046,11 +1035,10 @@ static void ql_mac_cfg_full_dup(struct q
else
value = (MAC_CONFIG_REG_FD << 16);
- if (qdev->mac_index) {
+ if (qdev->mac_index)
ql_write_page0_reg(qdev, &port_regs->mac1ConfigReg, value);
- } else {
+ else
ql_write_page0_reg(qdev, &port_regs->mac0ConfigReg, value);
- }
}
static void ql_mac_cfg_pause(struct ql3_adapter *qdev, u32 enable)
@@ -1066,11 +1054,10 @@ static void ql_mac_cfg_pause(struct ql3_
else
value = ((MAC_CONFIG_REG_TF | MAC_CONFIG_REG_RF) << 16);
- if (qdev->mac_index) {
+ if (qdev->mac_index)
ql_write_page0_reg(qdev, &port_regs->mac1ConfigReg, value);
- } else {
+ else
ql_write_page0_reg(qdev, &port_regs->mac0ConfigReg, value);
- }
}
static int ql_is_fiber(struct ql3_adapter *qdev)
@@ -1166,18 +1153,16 @@ static u32 ql_get_link_speed(struct ql3_
{
if (ql_is_fiber(qdev))
return SPEED_1000;
- else {
+ else
return ql_phy_get_speed(qdev);
- }
}
static int ql_is_link_full_dup(struct ql3_adapter *qdev)
{
if (ql_is_fiber(qdev))
return 1;
- else {
+ else
return ql_is_full_dup(qdev);
- }
}
static int ql_link_down_detect(struct ql3_adapter *qdev)
@@ -1442,11 +1427,10 @@ static void ql_get_phy_owner(struct ql3_
(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) *
2) << 7);
- if (ql_this_adapter_controls_port(qdev, qdev->mac_index)) {
+ if (ql_this_adapter_controls_port(qdev, qdev->mac_index))
set_bit(QL_LINK_MASTER,&qdev->flags);
- } else {
+ else
clear_bit(QL_LINK_MASTER,&qdev->flags);
- }
ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK);
}
@@ -1461,13 +1445,11 @@ static void ql_init_scan_mode(struct ql3
ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK);
if (test_bit(QL_LINK_OPTICAL,&qdev->flags)) {
- if (ql_this_adapter_controls_port(qdev, qdev->mac_index)) {
+ if (ql_this_adapter_controls_port(qdev, qdev->mac_index))
ql_petbi_init_ex(qdev, qdev->mac_index);
- }
} else {
- if (ql_this_adapter_controls_port(qdev, qdev->mac_index)) {
+ if (ql_this_adapter_controls_port(qdev, qdev->mac_index))
ql_phy_init_ex(qdev, qdev->mac_index);
- }
}
}
@@ -1646,11 +1628,10 @@ static irqreturn_t ql3xxx_isr(int irq, v
} else if (value & ISP_IMR_DISABLE_CMPL_INT) {
#ifdef CONFIG_QLA3XXX_NAPI
ql_disable_interrupts(qdev);
- if (likely(netif_rx_schedule_prep(ndev))) {
+ if (likely(netif_rx_schedule_prep(ndev)))
__netif_rx_schedule(ndev);
- } else {
+ else
ql_enable_interrupts(qdev);
- }
#else
handled = ql_intr_handler((unsigned long)qdev);
#endif
@@ -1694,9 +1675,8 @@ static int ql_populate_free_queue(struct
qdev->lrg_buffer_len -
QL_HEADER_SPACE);
--qdev->lrg_buf_skb_check;
- if (!qdev->lrg_buf_skb_check) {
+ if (!qdev->lrg_buf_skb_check)
return 1;
- }
}
}
lrg_buf_cb = lrg_buf_cb->next;
@@ -1715,9 +1695,8 @@ static void ql_update_lrg_bufq_prod_inde
&& (qdev->lrg_buf_release_cnt >= 16)) {
if (qdev->lrg_buf_skb_check) {
- if (!ql_populate_free_queue(qdev)) {
+ if (!ql_populate_free_queue(qdev))
return;
- }
}
lrg_buf_q_ele = qdev->lrg_buf_next_free;
@@ -1726,7 +1705,6 @@ static void ql_update_lrg_bufq_prod_inde
&& (qdev->lrg_buf_free_count >= 8)) {
for (i = 0; i < 8; i++) {
-
lrg_buf_cb =
ql_get_from_lrg_buf_free_list(qdev);
lrg_buf_q_ele->addr_high =
@@ -1799,9 +1777,8 @@ static void ql_process_mac_rx_intr(struc
* Get the inbound address list (small buffer).
*/
offset = qdev->small_buf_index * QL_SMALL_BUFFER_SIZE;
- if (++qdev->small_buf_index == NUM_SMALL_BUFFERS) {
+ if (++qdev->small_buf_index == NUM_SMALL_BUFFERS)
qdev->small_buf_index = 0;
- }
curr_ial_ptr = (u32 *) (qdev->small_buf_virt_addr + offset);
qdev->last_rsp_offset = qdev->small_buf_phy_addr_low + offset;
@@ -1811,9 +1788,8 @@ static void ql_process_mac_rx_intr(struc
lrg_buf_phy_addr_low = le32_to_cpu(*curr_ial_ptr);
lrg_buf_cb1 = &qdev->lrg_buf[qdev->lrg_buf_index];
qdev->lrg_buf_release_cnt++;
- if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS) {
+ if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS)
qdev->lrg_buf_index = 0;
- }
curr_ial_ptr++; /* 64-bit pointers require two incs. */
curr_ial_ptr++;
@@ -1825,9 +1801,8 @@ static void ql_process_mac_rx_intr(struc
* Second buffer gets sent up the stack.
*/
qdev->lrg_buf_release_cnt++;
- if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS) {
+ if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS)
qdev->lrg_buf_index = 0;
- }
skb = lrg_buf_cb2->skb;
qdev->stats.rx_packets++;
@@ -1873,9 +1848,8 @@ static void ql_process_macip_rx_intr(str
*/
offset = qdev->small_buf_index * QL_SMALL_BUFFER_SIZE;
- if (++qdev->small_buf_index == NUM_SMALL_BUFFERS) {
+ if (++qdev->small_buf_index == NUM_SMALL_BUFFERS)
qdev->small_buf_index = 0;
- }
curr_ial_ptr = (u32 *) (qdev->small_buf_virt_addr + offset);
qdev->last_rsp_offset = qdev->small_buf_phy_addr_low + offset;
qdev->small_buf_release_cnt++;
@@ -1885,9 +1859,8 @@ static void ql_process_macip_rx_intr(str
lrg_buf_cb1 = &qdev->lrg_buf[qdev->lrg_buf_index];
qdev->lrg_buf_release_cnt++;
- if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS) {
+ if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS)
qdev->lrg_buf_index = 0;
- }
skb1 = lrg_buf_cb1->skb;
curr_ial_ptr++; /* 64-bit pointers require two incs. */
curr_ial_ptr++;
@@ -1897,9 +1870,8 @@ static void ql_process_macip_rx_intr(str
lrg_buf_cb2 = &qdev->lrg_buf[qdev->lrg_buf_index];
skb2 = lrg_buf_cb2->skb;
qdev->lrg_buf_release_cnt++;
- if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS) {
+ if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS)
qdev->lrg_buf_index = 0;
- }
qdev->stats.rx_packets++;
qdev->stats.rx_bytes += length;
@@ -1908,11 +1880,10 @@ static void ql_process_macip_rx_intr(str
* Copy the ethhdr from first buffer to second. This
* is necessary for IP completions.
*/
- if (*((u16 *) skb1->data) != 0xFFFF) {
+ if (*((u16 *) skb1->data) != 0xFFFF)
size = VLAN_ETH_HLEN;
- } else {
+ else
size = ETH_HLEN;
- }
skb_put(skb2, length); /* Just the second buffer length here. */
pci_unmap_single(qdev->pdev,
@@ -2010,9 +1981,8 @@ static int ql_intr_handler(unsigned long
qdev->small_buf_q_producer_index++;
if (qdev->small_buf_q_producer_index ==
- NUM_SBUFQ_ENTRIES) {
+ NUM_SBUFQ_ENTRIES)
qdev->small_buf_q_producer_index = 0;
- }
qdev->small_buf_release_cnt -= 8;
}
@@ -2027,7 +1997,7 @@ static int ql_intr_handler(unsigned long
qdev->rsp_consumer_index);
spin_unlock(&qdev->adapter_lock);
- return (10 - max_ios_per_intr);
+ return 10 - max_ios_per_intr;
}
#else /* !CONFIG_QLA3XXX_NAPI */
@@ -2098,9 +2068,8 @@ static int ql_tx_rx_clean(struct ql3_ada
qdev->small_buf_q_producer_index++;
if (qdev->small_buf_q_producer_index ==
- NUM_SBUFQ_ENTRIES) {
+ NUM_SBUFQ_ENTRIES)
qdev->small_buf_q_producer_index = 0;
- }
qdev->small_buf_release_cnt -= 8;
}
@@ -2125,7 +2094,7 @@ static int ql_tx_rx_clean(struct ql3_ada
spin_unlock(&qdev->tx_lock);
}
- return (*tx_cleaned + *rx_cleaned);
+ return *tx_cleaned + *rx_cleaned;
}
static int ql_poll(struct net_device *ndev, int *budget)
@@ -2210,6 +2179,7 @@ static int ql3xxx_send(struct sk_buff *s
return NETDEV_TX_OK;
}
+
static int ql_alloc_net_req_rsp_queues(struct ql3_adapter *qdev)
{
qdev->req_q_size =
@@ -2797,7 +2767,7 @@ static int ql_adapter_initialize(struct
ql_sem_spinlock(qdev, QL_DDR_RAM_SEM_MASK,
(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) *
2) << 4);
- clear_bit(QL_LINK_MASTER,&qdev->flags);
+ clear_bit(QL_LINK_MASTER, &qdev->flags);
value = ql_read_page0_reg(qdev, &port_regs->portStatus);
if ((value & PORT_STATUS_IC) == 0) {
/* Chip has not been configured yet, so let it rip. */
@@ -2971,15 +2941,13 @@ static int ql_adapter_reset(struct ql3_a
ql_read_common_reg(qdev,
&port_regs->CommonRegs.
ispControlStatus);
- if ((value & ISP_CONTROL_FSR) == 0) {
+ if ((value & ISP_CONTROL_FSR) == 0)
break;
- }
msleep(1000);
} while ((--max_wait_time));
}
- if (max_wait_time == 0) {
+ if (max_wait_time == 0)
status = 1;
- }
clear_bit(QL_RESET_ACTIVE,&qdev->flags);
set_bit(QL_RESET_DONE,&qdev->flags);
@@ -3211,9 +3179,8 @@ static int ql3xxx_close(struct net_devic
* Wait for device to recover from a reset.
* (Rarely happens, but possible.)
*/
- while (!test_bit(QL_ADAPTER_UP,&qdev->flags)) {
+ while (!test_bit(QL_ADAPTER_UP,&qdev->flags))
msleep(50);
- }
ql_adapter_down(qdev,QL_DO_RESET);
return 0;
@@ -3644,10 +3611,9 @@ static void __devexit ql3xxx_remove(stru
/*
* Wait for any resets to complete...
*/
- while (test_bit((QL_RESET_ACTIVE | QL_RESET_START | QL_RESET_PER_SCSI),
- &qdev->flags)) {
+ while (test_bit((QL_RESET_ACTIVE | QL_RESET_START | QL_RESET_PER_SCSI),
+ &qdev->flags))
msleep(1000);
- }
index = qdev->index;
if (qdev->workqueue) {
_
next prev parent reply other threads:[~2006-06-22 4:56 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-21 21:24 New Qlogic qla3xxx NIC Driver v2.02.00k31 for upstream inclusion Ron Mercer
2006-06-21 22:06 ` Francois Romieu
2006-06-22 4:55 ` Andrew Morton [this message]
2006-06-23 0:51 ` Philip Craig
-- strict thread matches above, loose matches on Subject: below --
2006-06-22 21:00 Ron Mercer
2006-06-22 21:22 ` Andrew Morton
2006-06-22 21:35 ` Jeff Garzik
2006-06-12 20:33 Ron Mercer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060621215531.14812d7c.akpm@osdl.org \
--to=akpm@osdl.org \
--cc=jeff@garzik.org \
--cc=linux-driver@qlogic.com \
--cc=netdev@vger.kernel.org \
--cc=ron.mercer@qlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).