From: "Kok, Auke" <auke-jan.h.kok@intel.com>
To: "Garzik, Jeff" <jgarzik@pobox.com>
Cc: netdev@vger.kernel.org, "Brandeburg,
Jesse" <jesse.brandeburg@intel.com>,
"Kok, Auke" <auke-jan.h.kok@intel.com>,
"Kok, Auke" <auke@foo-projects.org>,
"Ronciak, John" <john.ronciak@intel.com>
Subject: [PATCH 09/21] e1000: rework module param code with uninitialized values
Date: Wed, 21 Jun 2006 22:20:25 -0700 [thread overview]
Message-ID: <20060622052025.25497.98226.stgit@gitlost.site> (raw)
In-Reply-To: <20060622051815.25497.89192.stgit@gitlost.site>
We can take uninitialized values into account which minimizes code
and allows us to simplify the parameter checking code greatly.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
---
drivers/net/e1000/e1000_param.c | 167 ++++++++++++++-------------------------
1 files changed, 61 insertions(+), 106 deletions(-)
diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c
index a8d9295..bd6c040 100644
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/e1000/e1000_param.c
@@ -45,6 +45,16 @@
*/
#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
+/* Module Parameters are always initialized to -1, so that the driver
+ * can tell the difference between no user specified value or the
+ * user asking for the default value.
+ * The true default values are loaded in when e1000_check_options is called.
+ *
+ * This is a GCC extension to ANSI C.
+ * See the item "Labeled Elements in Initializers" in the section
+ * "Extensions to the C Language Family" of the GCC documentation.
+ */
+
#define E1000_PARAM(X, desc) \
static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
static int num_##X = 0; \
@@ -305,6 +315,7 @@ e1000_check_options(struct e1000_adapter
DPRINTK(PROBE, NOTICE,
"Warning: no configuration for board #%i\n", bd);
DPRINTK(PROBE, NOTICE, "Using defaults for all values\n");
+ bd = E1000_MAX_NIC;
}
{ /* Transmit Descriptor Count */
@@ -322,14 +333,9 @@ e1000_check_options(struct e1000_adapter
opt.arg.r.max = mac_type < e1000_82544 ?
E1000_MAX_TXD : E1000_MAX_82544_TXD;
- if (num_TxDescriptors > bd) {
- tx_ring->count = TxDescriptors[bd];
- e1000_validate_option(&tx_ring->count, &opt, adapter);
- E1000_ROUNDUP(tx_ring->count,
- REQ_TX_DESCRIPTOR_MULTIPLE);
- } else {
- tx_ring->count = opt.def;
- }
+ tx_ring->count = TxDescriptors[bd];
+ e1000_validate_option(&tx_ring->count, &opt, adapter);
+ E1000_ROUNDUP(tx_ring->count, REQ_TX_DESCRIPTOR_MULTIPLE);
for (i = 0; i < adapter->num_tx_queues; i++)
tx_ring[i].count = tx_ring->count;
}
@@ -348,14 +354,9 @@ e1000_check_options(struct e1000_adapter
opt.arg.r.max = mac_type < e1000_82544 ? E1000_MAX_RXD :
E1000_MAX_82544_RXD;
- if (num_RxDescriptors > bd) {
- rx_ring->count = RxDescriptors[bd];
- e1000_validate_option(&rx_ring->count, &opt, adapter);
- E1000_ROUNDUP(rx_ring->count,
- REQ_RX_DESCRIPTOR_MULTIPLE);
- } else {
- rx_ring->count = opt.def;
- }
+ rx_ring->count = RxDescriptors[bd];
+ e1000_validate_option(&rx_ring->count, &opt, adapter);
+ E1000_ROUNDUP(rx_ring->count, REQ_RX_DESCRIPTOR_MULTIPLE);
for (i = 0; i < adapter->num_rx_queues; i++)
rx_ring[i].count = rx_ring->count;
}
@@ -367,13 +368,9 @@ e1000_check_options(struct e1000_adapter
.def = OPTION_ENABLED
};
- if (num_XsumRX > bd) {
- int rx_csum = XsumRX[bd];
- e1000_validate_option(&rx_csum, &opt, adapter);
- adapter->rx_csum = rx_csum;
- } else {
- adapter->rx_csum = opt.def;
- }
+ int rx_csum = XsumRX[bd];
+ e1000_validate_option(&rx_csum, &opt, adapter);
+ adapter->rx_csum = rx_csum;
}
{ /* Flow Control */
@@ -393,13 +390,9 @@ e1000_check_options(struct e1000_adapter
.p = fc_list }}
};
- if (num_FlowControl > bd) {
- int fc = FlowControl[bd];
- e1000_validate_option(&fc, &opt, adapter);
- adapter->hw.fc = adapter->hw.original_fc = fc;
- } else {
- adapter->hw.fc = adapter->hw.original_fc = opt.def;
- }
+ int fc = FlowControl[bd];
+ e1000_validate_option(&fc, &opt, adapter);
+ adapter->hw.fc = adapter->hw.original_fc = fc;
}
{ /* Transmit Interrupt Delay */
struct e1000_option opt = {
@@ -411,13 +404,8 @@ e1000_check_options(struct e1000_adapter
.max = MAX_TXDELAY }}
};
- if (num_TxIntDelay > bd) {
- adapter->tx_int_delay = TxIntDelay[bd];
- e1000_validate_option(&adapter->tx_int_delay, &opt,
- adapter);
- } else {
- adapter->tx_int_delay = opt.def;
- }
+ adapter->tx_int_delay = TxIntDelay[bd];
+ e1000_validate_option(&adapter->tx_int_delay, &opt, adapter);
}
{ /* Transmit Absolute Interrupt Delay */
struct e1000_option opt = {
@@ -429,13 +417,9 @@ e1000_check_options(struct e1000_adapter
.max = MAX_TXABSDELAY }}
};
- if (num_TxAbsIntDelay > bd) {
- adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
- e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
- adapter);
- } else {
- adapter->tx_abs_int_delay = opt.def;
- }
+ adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
+ e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
+ adapter);
}
{ /* Receive Interrupt Delay */
struct e1000_option opt = {
@@ -447,13 +431,8 @@ e1000_check_options(struct e1000_adapter
.max = MAX_RXDELAY }}
};
- if (num_RxIntDelay > bd) {
- adapter->rx_int_delay = RxIntDelay[bd];
- e1000_validate_option(&adapter->rx_int_delay, &opt,
- adapter);
- } else {
- adapter->rx_int_delay = opt.def;
- }
+ adapter->rx_int_delay = RxIntDelay[bd];
+ e1000_validate_option(&adapter->rx_int_delay, &opt, adapter);
}
{ /* Receive Absolute Interrupt Delay */
struct e1000_option opt = {
@@ -465,13 +444,9 @@ e1000_check_options(struct e1000_adapter
.max = MAX_RXABSDELAY }}
};
- if (num_RxAbsIntDelay > bd) {
- adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
- e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
- adapter);
- } else {
- adapter->rx_abs_int_delay = opt.def;
- }
+ adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
+ e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
+ adapter);
}
{ /* Interrupt Throttling Rate */
struct e1000_option opt = {
@@ -483,24 +458,18 @@ e1000_check_options(struct e1000_adapter
.max = MAX_ITR }}
};
- if (num_InterruptThrottleRate > bd) {
- adapter->itr = InterruptThrottleRate[bd];
- switch (adapter->itr) {
- case 0:
- DPRINTK(PROBE, INFO, "%s turned off\n",
- opt.name);
- break;
- case 1:
- DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
- opt.name);
- break;
- default:
- e1000_validate_option(&adapter->itr, &opt,
- adapter);
- break;
- }
- } else {
- adapter->itr = opt.def;
+ adapter->itr = InterruptThrottleRate[bd];
+ switch (adapter->itr) {
+ case 0:
+ DPRINTK(PROBE, INFO, "%s turned off\n", opt.name);
+ break;
+ case 1:
+ DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
+ opt.name);
+ break;
+ default:
+ e1000_validate_option(&adapter->itr, &opt, adapter);
+ break;
}
}
{ /* Smart Power Down */
@@ -511,13 +480,9 @@ e1000_check_options(struct e1000_adapter
.def = OPTION_DISABLED
};
- if (num_SmartPowerDownEnable > bd) {
- int spd = SmartPowerDownEnable[bd];
- e1000_validate_option(&spd, &opt, adapter);
- adapter->smart_power_down = spd;
- } else {
- adapter->smart_power_down = opt.def;
- }
+ int spd = SmartPowerDownEnable[bd];
+ e1000_validate_option(&spd, &opt, adapter);
+ adapter->smart_power_down = spd;
}
switch (adapter->hw.media_type) {
@@ -544,17 +509,18 @@ static void __devinit
e1000_check_fiber_options(struct e1000_adapter *adapter)
{
int bd = adapter->bd_number;
- if (num_Speed > bd) {
+ bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd;
+ if ((Speed[bd] != OPTION_UNSET)) {
DPRINTK(PROBE, INFO, "Speed not valid for fiber adapters, "
"parameter ignored\n");
}
- if (num_Duplex > bd) {
+ if ((Duplex[bd] != OPTION_UNSET)) {
DPRINTK(PROBE, INFO, "Duplex not valid for fiber adapters, "
"parameter ignored\n");
}
- if ((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) {
+ if ((AutoNeg[bd] != OPTION_UNSET) && (AutoNeg[bd] != 0x20)) {
DPRINTK(PROBE, INFO, "AutoNeg other than 1000/Full is "
"not valid for fiber adapters, "
"parameter ignored\n");
@@ -573,6 +539,7 @@ e1000_check_copper_options(struct e1000_
{
int speed, dplx, an;
int bd = adapter->bd_number;
+ bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd;
{ /* Speed */
struct e1000_opt_list speed_list[] = {{ 0, "" },
@@ -589,12 +556,8 @@ e1000_check_copper_options(struct e1000_
.p = speed_list }}
};
- if (num_Speed > bd) {
- speed = Speed[bd];
- e1000_validate_option(&speed, &opt, adapter);
- } else {
- speed = opt.def;
- }
+ speed = Speed[bd];
+ e1000_validate_option(&speed, &opt, adapter);
}
{ /* Duplex */
struct e1000_opt_list dplx_list[] = {{ 0, "" },
@@ -616,15 +579,11 @@ e1000_check_copper_options(struct e1000_
"Speed/Duplex/AutoNeg parameter ignored.\n");
return;
}
- if (num_Duplex > bd) {
- dplx = Duplex[bd];
- e1000_validate_option(&dplx, &opt, adapter);
- } else {
- dplx = opt.def;
- }
+ dplx = Duplex[bd];
+ e1000_validate_option(&dplx, &opt, adapter);
}
- if ((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) {
+ if (AutoNeg[bd] != OPTION_UNSET && (speed != 0 || dplx != 0)) {
DPRINTK(PROBE, INFO,
"AutoNeg specified along with Speed or Duplex, "
"parameter ignored\n");
@@ -673,19 +632,15 @@ e1000_check_copper_options(struct e1000_
.p = an_list }}
};
- if (num_AutoNeg > bd) {
- an = AutoNeg[bd];
- e1000_validate_option(&an, &opt, adapter);
- } else {
- an = opt.def;
- }
+ an = AutoNeg[bd];
+ e1000_validate_option(&an, &opt, adapter);
adapter->hw.autoneg_advertised = an;
}
switch (speed + dplx) {
case 0:
adapter->hw.autoneg = adapter->fc_autoneg = 1;
- if ((num_Speed > bd) && (speed != 0 || dplx != 0))
+ if (Speed[bd] != OPTION_UNSET || Duplex[bd] != OPTION_UNSET)
DPRINTK(PROBE, INFO,
"Speed and duplex autonegotiation enabled\n");
break;
--
Auke Kok <auke-jan.h.kok@intel.com>
next prev parent reply other threads:[~2006-06-22 5:14 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-22 5:18 [PATCH 00/21] e1000: driver update to 7.1.9-k2 Kok, Auke
2006-06-22 5:20 ` [PATCH 01/21] e1000: fix loopback ethtool test Kok, Auke
2006-06-22 5:20 ` [PATCH 02/21] e1000: rework driver hardware reset locking Kok, Auke
2006-06-27 1:42 ` Jeff Garzik
2006-06-27 14:42 ` Auke Kok
2006-06-22 5:20 ` [PATCH 03/21] e1000: Make PHY powerup/down a function Kok, Auke
2006-06-22 5:20 ` [PATCH 04/21] e1000: fix CONFIG_PM blocks Kok, Auke
2006-06-22 5:20 ` [PATCH 05/21] e1000: small performance tweak by removing double code Kok, Auke
2006-06-22 5:20 ` [PATCH 06/21] e1000: add smart power down code Kok, Auke
2006-06-27 1:43 ` Jeff Garzik
2006-06-27 8:49 ` Florian Reitmeir
2006-06-27 14:40 ` Auke Kok
2006-06-22 5:20 ` [PATCH 07/21] e1000: change printk into DPRINTK Kok, Auke
2006-06-22 5:20 ` [PATCH 08/21] e1000: recycle skb Kok, Auke
2006-06-22 5:20 ` Kok, Auke [this message]
2006-06-22 5:20 ` [PATCH 10/21] e1000: force register write flushes to circumvent broken platforms Kok, Auke
2006-06-27 1:47 ` Jeff Garzik
2006-06-27 14:36 ` Auke Kok
2006-06-27 15:41 ` Jeff Garzik
2006-06-27 15:56 ` Auke Kok
2006-06-22 5:20 ` [PATCH 11/21] e1000: disable CRC stripping workaround Kok, Auke
2006-06-22 5:31 ` Ben Greear
2006-06-22 15:36 ` Auke Kok
2006-06-22 15:39 ` Jesse Brandeburg
2006-06-22 15:55 ` Ben Greear
2006-06-22 16:01 ` Jesse Brandeburg
2006-06-22 15:57 ` Lennert Buytenhek
2006-06-27 1:48 ` Jeff Garzik
2006-06-27 14:29 ` Auke Kok
2006-06-22 5:20 ` [PATCH 12/21] e1000: fix adapter led blinking inconsistency Kok, Auke
2006-06-22 5:20 ` [PATCH 13/21] e1000: add E1000_BIG_ENDIAN symbol Kok, Auke
2006-06-27 1:49 ` Jeff Garzik
2006-06-27 14:25 ` Auke Kok
2006-06-22 5:20 ` [PATCH 14/21] e1000: M88 PHY workaround Kok, Auke
2006-06-22 5:20 ` [PATCH 15/21] e1000: check return value of _get_speed_and_duplex Kok, Auke
2006-06-22 5:20 ` [PATCH 16/21] e1000: disable ERT Kok, Auke
2006-06-22 5:20 ` [PATCH 17/21] e1000: add ich8lan core functions Kok, Auke
2006-06-27 1:52 ` Jeff Garzik
2006-06-27 16:12 ` Auke Kok
2006-06-22 5:20 ` [PATCH 18/21] e1000: integrate ich8 support into driver Kok, Auke
2006-06-27 1:54 ` Jeff Garzik
2006-06-22 5:20 ` [PATCH 19/21] e1000: allow user to disable ich8 lock loss workaround Kok, Auke
2006-06-27 1:55 ` Jeff Garzik
2006-06-27 14:21 ` Auke Kok
2006-06-22 5:20 ` [PATCH 20/21] e1000: add ich8lan device ID's Kok, Auke
2006-06-22 5:20 ` [PATCH 21/21] e1000: increase version to 7.1.9-k2 Kok, Auke
2006-06-27 22:48 ` [PATCH 00/21] e1000: driver update " Auke Kok
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060622052025.25497.98226.stgit@gitlost.site \
--to=auke-jan.h.kok@intel.com \
--cc=auke@foo-projects.org \
--cc=jesse.brandeburg@intel.com \
--cc=jgarzik@pobox.com \
--cc=john.ronciak@intel.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).