From: "Kok, Auke" <auke-jan.h.kok@intel.com>
To: "Garzik, Jeff" <jgarzik@pobox.com>
Cc: netdev@vger.kernel.org, "Brandeburg,
Jesse" <jesse.brandeburg@intel.com>,
"Kok, Auke" <auke-jan.h.kok@intel.com>,
"Kok, Auke" <auke@foo-projects.org>,
"Ronciak, John" <john.ronciak@intel.com>
Subject: [PATCH 12/21] e1000: fix adapter led blinking inconsistency
Date: Wed, 21 Jun 2006 22:20:32 -0700 [thread overview]
Message-ID: <20060622052032.25497.4540.stgit@gitlost.site> (raw)
In-Reply-To: <20060622051815.25497.89192.stgit@gitlost.site>
Several e1000 adapters were not blinking correctly or inconsistently. This
patch cleans this up and makes them all behave the same as far as possible.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
---
drivers/net/e1000/e1000_ethtool.c | 15 +--------------
drivers/net/e1000/e1000_hw.c | 38 +++++++++++++++++++++++++++++++++++++
drivers/net/e1000/e1000_hw.h | 1 +
3 files changed, 40 insertions(+), 14 deletions(-)
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index cf5c5f4..0609155 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -1786,21 +1786,8 @@ e1000_phys_id(struct net_device *netdev,
mod_timer(&adapter->blink_timer, jiffies);
msleep_interruptible(data * 1000);
del_timer_sync(&adapter->blink_timer);
- } else if (adapter->hw.mac_type < e1000_82573) {
- E1000_WRITE_REG(&adapter->hw, LEDCTL,
- (E1000_LEDCTL_LED2_BLINK_RATE |
- E1000_LEDCTL_LED0_BLINK | E1000_LEDCTL_LED2_BLINK |
- (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) |
- (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED0_MODE_SHIFT) |
- (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED1_MODE_SHIFT)));
- msleep_interruptible(data * 1000);
} else {
- E1000_WRITE_REG(&adapter->hw, LEDCTL,
- (E1000_LEDCTL_LED2_BLINK_RATE |
- E1000_LEDCTL_LED1_BLINK | E1000_LEDCTL_LED2_BLINK |
- (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) |
- (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED1_MODE_SHIFT) |
- (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED0_MODE_SHIFT)));
+ e1000_blink_led_start(&adapter->hw);
msleep_interruptible(data * 1000);
}
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 749d621..1c5b184 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -5537,6 +5537,44 @@ e1000_setup_led(struct e1000_hw *hw)
}
/******************************************************************************
+ * Used on 82571 and later Si that has LED blink bits.
+ * Callers must use their own timer and should have already called
+ * e1000_id_led_init()
+ * Call e1000_cleanup led() to stop blinking
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+int32_t
+e1000_blink_led_start(struct e1000_hw *hw)
+{
+ int16_t i;
+ uint32_t ledctl_blink = 0;
+
+ DEBUGFUNC("e1000_id_led_blink_on");
+
+ if (hw->mac_type < e1000_82571) {
+ /* Nothing to do */
+ return E1000_SUCCESS;
+ }
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* always blink LED0 for PCI-E fiber */
+ ledctl_blink = E1000_LEDCTL_LED0_BLINK |
+ (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
+ } else {
+ /* set the blink bit for each LED that's "on" (0x0E) in ledctl_mode2 */
+ ledctl_blink = hw->ledctl_mode2;
+ for (i=0; i < 4; i++)
+ if (((hw->ledctl_mode2 >> (i * 8)) & 0xFF) ==
+ E1000_LEDCTL_MODE_LED_ON)
+ ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << (i * 8));
+ }
+
+ E1000_WRITE_REG(hw, LEDCTL, ledctl_blink);
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
* Restores the saved state of the SW controlable LED.
*
* hw - Struct containing variables accessed by shared code
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index 467c9ed..941b47d 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -401,6 +401,7 @@ int32_t e1000_setup_led(struct e1000_hw
int32_t e1000_cleanup_led(struct e1000_hw *hw);
int32_t e1000_led_on(struct e1000_hw *hw);
int32_t e1000_led_off(struct e1000_hw *hw);
+int32_t e1000_blink_led_start(struct e1000_hw *hw);
/* Adaptive IFS Functions */
--
Auke Kok <auke-jan.h.kok@intel.com>
next prev parent reply other threads:[~2006-06-22 5:14 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-22 5:18 [PATCH 00/21] e1000: driver update to 7.1.9-k2 Kok, Auke
2006-06-22 5:20 ` [PATCH 01/21] e1000: fix loopback ethtool test Kok, Auke
2006-06-22 5:20 ` [PATCH 02/21] e1000: rework driver hardware reset locking Kok, Auke
2006-06-27 1:42 ` Jeff Garzik
2006-06-27 14:42 ` Auke Kok
2006-06-22 5:20 ` [PATCH 03/21] e1000: Make PHY powerup/down a function Kok, Auke
2006-06-22 5:20 ` [PATCH 04/21] e1000: fix CONFIG_PM blocks Kok, Auke
2006-06-22 5:20 ` [PATCH 05/21] e1000: small performance tweak by removing double code Kok, Auke
2006-06-22 5:20 ` [PATCH 06/21] e1000: add smart power down code Kok, Auke
2006-06-27 1:43 ` Jeff Garzik
2006-06-27 8:49 ` Florian Reitmeir
2006-06-27 14:40 ` Auke Kok
2006-06-22 5:20 ` [PATCH 07/21] e1000: change printk into DPRINTK Kok, Auke
2006-06-22 5:20 ` [PATCH 08/21] e1000: recycle skb Kok, Auke
2006-06-22 5:20 ` [PATCH 09/21] e1000: rework module param code with uninitialized values Kok, Auke
2006-06-22 5:20 ` [PATCH 10/21] e1000: force register write flushes to circumvent broken platforms Kok, Auke
2006-06-27 1:47 ` Jeff Garzik
2006-06-27 14:36 ` Auke Kok
2006-06-27 15:41 ` Jeff Garzik
2006-06-27 15:56 ` Auke Kok
2006-06-22 5:20 ` [PATCH 11/21] e1000: disable CRC stripping workaround Kok, Auke
2006-06-22 5:31 ` Ben Greear
2006-06-22 15:36 ` Auke Kok
2006-06-22 15:39 ` Jesse Brandeburg
2006-06-22 15:55 ` Ben Greear
2006-06-22 16:01 ` Jesse Brandeburg
2006-06-22 15:57 ` Lennert Buytenhek
2006-06-27 1:48 ` Jeff Garzik
2006-06-27 14:29 ` Auke Kok
2006-06-22 5:20 ` Kok, Auke [this message]
2006-06-22 5:20 ` [PATCH 13/21] e1000: add E1000_BIG_ENDIAN symbol Kok, Auke
2006-06-27 1:49 ` Jeff Garzik
2006-06-27 14:25 ` Auke Kok
2006-06-22 5:20 ` [PATCH 14/21] e1000: M88 PHY workaround Kok, Auke
2006-06-22 5:20 ` [PATCH 15/21] e1000: check return value of _get_speed_and_duplex Kok, Auke
2006-06-22 5:20 ` [PATCH 16/21] e1000: disable ERT Kok, Auke
2006-06-22 5:20 ` [PATCH 17/21] e1000: add ich8lan core functions Kok, Auke
2006-06-27 1:52 ` Jeff Garzik
2006-06-27 16:12 ` Auke Kok
2006-06-22 5:20 ` [PATCH 18/21] e1000: integrate ich8 support into driver Kok, Auke
2006-06-27 1:54 ` Jeff Garzik
2006-06-22 5:20 ` [PATCH 19/21] e1000: allow user to disable ich8 lock loss workaround Kok, Auke
2006-06-27 1:55 ` Jeff Garzik
2006-06-27 14:21 ` Auke Kok
2006-06-22 5:20 ` [PATCH 20/21] e1000: add ich8lan device ID's Kok, Auke
2006-06-22 5:20 ` [PATCH 21/21] e1000: increase version to 7.1.9-k2 Kok, Auke
2006-06-27 22:48 ` [PATCH 00/21] e1000: driver update " Auke Kok
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060622052032.25497.4540.stgit@gitlost.site \
--to=auke-jan.h.kok@intel.com \
--cc=auke@foo-projects.org \
--cc=jesse.brandeburg@intel.com \
--cc=jgarzik@pobox.com \
--cc=john.ronciak@intel.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).