From: Michael Buesch <mb@bu3sch.de>
To: Jiri Benc <jbenc@suse.cz>
Cc: bcm43xx-dev@lists.berlios.de, netdev@vger.kernel.org,
"Alexander Tsvyashchenko" <lists@ndl.kiev.ua>,
"Francois Barre" <francois.barre@gmail.com>,
Jouni Malinen <jkmaline@cc.hut.fi>
Subject: Re: hostapd patch for d80211
Date: Fri, 23 Jun 2006 23:13:43 +0200 [thread overview]
Message-ID: <200606232313.43621.mb@bu3sch.de> (raw)
In-Reply-To: <20060623201933.59578ecc@griffin.suse.cz>
On Friday 23 June 2006 20:19, Jiri Benc wrote:
> On Mon, 19 Jun 2006 11:07:34 +0200, Michael Buesch wrote:
> > Important notes from Alexander Tsvyashchenko's initial mail follow:
> > [...]
> > Although my previous patch to hostapd to make it interoperable with
> > bcm43xx & dscape has been merged already in their CVS version, due to
> > the subsequent changes in dscape stack current hostapd is again
> > incompartible :-(
>
> This patch allows devicescape driver in hostapd to work with recent d80211.
> No manipulation with network interfaces is needed anymore - hostapd even
> switches the interface to AP mode automatically now. Just modprobe
> bcm43xx-d80211, run hostapd and enjoy :-)
>
> Signed-off-by: Jiri Benc <jbenc@suse.cz>
Well, if it works.... Jouni, please apply.
I did not test it. But I trust Jiri. If he says it works, then
it does work :)
> ---
>
> driver_devicescape.c | 77 ++++++++++++++++++++++++++++++++++++++++++---------
> 1 files changed, 64 insertions(+), 13 deletions(-)
>
> --- hostapd-0.5-2006-06-19.orig/driver_devicescape.c
> +++ hostapd-0.5-2006-06-19/driver_devicescape.c
> @@ -73,6 +73,7 @@ struct i802_driver_data {
>
> char iface[IFNAMSIZ + 1];
> char mgmt_iface[IFNAMSIZ + 1];
> + int mgmt_ifindex;
> int sock; /* raw packet socket for driver access */
> int ioctl_sock; /* socket for ioctl() use */
> int wext_sock; /* socket for wireless events */
> @@ -88,6 +89,21 @@ static const struct driver_ops devicesca
> static int i802_sta_set_flags(void *priv, const u8 *addr,
> int flags_or, int flags_and);
>
> +static int i802_set_ap_mode(struct i802_driver_data *drv)
> +{
> + struct iwreq iwr;
> +
> + memset(&iwr, 0, sizeof(iwr));
> + strncpy(iwr.ifr_name, drv->iface, IFNAMSIZ);
> + iwr.u.mode = IW_MODE_MASTER;
> +
> + if (ioctl(drv->ioctl_sock, SIOCSIWMODE, &iwr) < 0) {
> + perror("ioctl[SIOCSIWMODE]");
> + return -1;
> + }
> +
> + return 0;
> +}
>
> static int hostapd_set_iface_flags(struct i802_driver_data *drv, int dev_up)
> {
> @@ -96,13 +112,16 @@ static int hostapd_set_iface_flags(struc
> if (drv->ioctl_sock < 0)
> return -1;
>
> + if (dev_up)
> + i802_set_ap_mode(drv);
> +
> memset(&ifr, 0, sizeof(ifr));
> - snprintf(ifr.ifr_name, IFNAMSIZ, "%s", drv->mgmt_iface);
> + snprintf(ifr.ifr_name, IFNAMSIZ, "%s", drv->iface);
>
> if (ioctl(drv->ioctl_sock, SIOCGIFFLAGS, &ifr) != 0) {
> perror("ioctl[SIOCGIFFLAGS]");
> wpa_printf(MSG_DEBUG, "Could not read interface flags (%s)",
> - drv->mgmt_iface);
> + drv->iface);
> return -1;
> }
>
> @@ -303,7 +322,35 @@ static int hostap_ioctl_prism2param(stru
> return hostap_ioctl_prism2param_iface(drv->iface, drv, param, value);
> }
>
> -
> +static int hostap_ioctl_get_prism2param_iface(const char *iface,
> + struct i802_driver_data *drv,
> + int param)
> +{
> + struct iwreq iwr;
> + int *i;
> +
> + memset(&iwr, 0, sizeof(iwr));
> + strncpy(iwr.ifr_name, iface, IFNAMSIZ);
> + i = (int *) iwr.u.name;
> + *i = param;
> +
> + if (ioctl(drv->ioctl_sock, PRISM2_IOCTL_GET_PRISM2_PARAM, &iwr) < 0) {
> + char buf[128];
> + snprintf(buf, sizeof(buf),
> + "%s: ioctl[PRISM2_IOCTL_GET_PRISM2_PARAM]", iface);
> + perror(buf);
> + return -1;
> + }
> +
> + return *i;
> +}
> +
> +static int hostap_ioctl_get_prism2param(struct i802_driver_data *drv,
> + int param)
> +{
> + return hostap_ioctl_get_prism2param_iface(drv->iface, drv, param);
> +}
> +
> static int i802_set_ssid(void *priv, const u8 *buf, int len)
> {
> struct i802_driver_data *drv = priv;
> @@ -1338,12 +1385,20 @@ static int i802_init_sockets(struct i802
> return -1;
> }
>
> + /* Enable management interface */
> + if (hostap_ioctl_prism2param(drv, PRISM2_PARAM_MGMT_IF, 1) < 0)
> + return -1;
> + drv->mgmt_ifindex =
> + hostap_ioctl_get_prism2param(drv, PRISM2_PARAM_MGMT_IF);
> + if (drv->mgmt_ifindex < 0)
> + return -1;
> memset(&ifr, 0, sizeof(ifr));
> - snprintf(ifr.ifr_name, sizeof(ifr.ifr_name), "%s", drv->mgmt_iface);
> - if (ioctl(drv->ioctl_sock, SIOCGIFINDEX, &ifr) != 0) {
> - perror("ioctl(SIOCGIFINDEX)");
> + ifr.ifr_ifindex = drv->mgmt_ifindex;
> + if (ioctl(drv->ioctl_sock, SIOCGIFNAME, &ifr) != 0) {
> + perror("ioctl(SIOCGIFNAME)");
> return -1;
> }
> + snprintf(drv->mgmt_iface, sizeof(drv->mgmt_iface), "%s", ifr.ifr_name);
>
> if (hostapd_set_iface_flags(drv, 1))
> return -1;
> @@ -1716,13 +1771,6 @@ static int i802_init(struct hostapd_data
> drv->ops = devicescape_driver_ops;
> drv->hapd = hapd;
> memcpy(drv->iface, hapd->conf->iface, sizeof(drv->iface));
> - if (strncmp(hapd->conf->iface, "wlan", 4) == 0) {
> - snprintf(drv->mgmt_iface, sizeof(drv->mgmt_iface),
> - "wmaster%sap", hapd->conf->iface + 4);
> - } else {
> - snprintf(drv->mgmt_iface, sizeof(drv->mgmt_iface),
> - "%sap", hapd->conf->iface);
> - }
>
> if (i802_init_sockets(drv))
> goto failed;
> @@ -1751,6 +1799,9 @@ static void i802_deinit(void *priv)
>
> (void) hostapd_set_iface_flags(drv, 0);
>
> + /* Disable management interface */
> + hostap_ioctl_prism2param(drv, PRISM2_PARAM_MGMT_IF, 0);
> +
> if (drv->sock >= 0)
> close(drv->sock);
> if (drv->ioctl_sock >= 0)
>
>
--
Greetings Michael.
next prev parent reply other threads:[~2006-06-23 21:14 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-19 9:07 [PATCH, RFT] bcm43xx: AccessPoint mode Michael Buesch
2006-06-22 15:30 ` Jiri Benc
2006-06-22 19:08 ` Alexander Tsvyashchenko
2006-06-23 11:26 ` Jiri Benc
2006-06-23 18:19 ` hostapd patch for d80211 Jiri Benc
2006-06-23 21:13 ` Michael Buesch [this message]
2006-06-24 2:17 ` Jouni Malinen
2006-06-28 19:27 ` [PATCH, RFT] bcm43xx: AccessPoint mode Francois Barre
2006-06-28 19:39 ` Michael Buesch
2006-06-28 19:50 ` Francois Barre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200606232313.43621.mb@bu3sch.de \
--to=mb@bu3sch.de \
--cc=bcm43xx-dev@lists.berlios.de \
--cc=francois.barre@gmail.com \
--cc=jbenc@suse.cz \
--cc=jkmaline@cc.hut.fi \
--cc=lists@ndl.kiev.ua \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).