Re: Bug#380411: 3c59x broken after swsuspend

Re: Bug#380411: 3c59x broken after swsuspend

[maximilian attems]

hello michael,

sending bugreport to netdev.

On Sun, 30 Jul 2006, Michael Banck wrote:

> Package: linux-2.6
> Version: 2.6.17-4
> 
> after hibernate, my 3Com Corporation 3c556 Hurricane CardBus [Cyclone]
> (rev 10) (3c59x driver) fails to come back up.
> 
> This is written on the console/xterm:
> 
> Internet Systems Consortium DHCP Client V3.0.4
> Copyright 2004-2006 Internet Systems Consortium.
> All rights reserved.
> For info, please visit http://www.isc.org/sw/dhcp/
> 
> SIOCSIFADDR: No such device
> eth0: ERROR while getting interface flags: No such device
> eth0: ERROR while getting interface flags: No such device
> FATAL: Module acpi_sbs not found.
> Bind socket to interface: No such device
> Failed to bring up eth0.
> 
> And this is in dmesg:
> 
> 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
> 0000:00:0b.0: 3Com PCI 3c556 Laptop Tornado at c8830400.
> eth1: New link status: Connected (0001)
> *** EEPROM MAC address is invalid.
> 3c59x: vortex_probe1 fails.  Returns -22
> ACPI: PCI interrupt for device 0000:00:0b.0 disabled
> 3c59x: probe of 0000:00:0b.0 failed with error -22
> 
> 
> Michael
-- 
maks

Re: Bug#380411: 3c59x broken after swsuspend

[Michael Banck]

On Sun, Jul 30, 2006 at 11:25:12AM +0200, maximilian attems wrote:
> sending bugreport to netdev.

Thanks.

> On Sun, 30 Jul 2006, Michael Banck wrote:
> 
> > Package: linux-2.6
> > Version: 2.6.17-4
> > 
> > after hibernate, my 3Com Corporation 3c556 Hurricane CardBus [Cyclone]
> > (rev 10) (3c59x driver) fails to come back up.

I just verfied that Suspend to RAM works fine.

> > And this is in dmesg:

There is one more line in front of that I missed last time:

    ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKA] -> GSI
10 (level, low) -> IRQ 10
> > 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
> > 0000:00:0b.0: 3Com PCI 3c556 Laptop Tornado at c8830400.
> > eth1: New link status: Connected (0001)
> > *** EEPROM MAC address is invalid.
> > 3c59x: vortex_probe1 fails.  Returns -22
> > ACPI: PCI interrupt for device 0000:00:0b.0 disabled
> > 3c59x: probe of 0000:00:0b.0 failed with error -22

This additional line is also printed to the console if I unload the
module, suspend to ram, and then modprobe it some time after resume.


Michael